Swissdani 1 Posted June 28, 2017 Share Posted June 28, 2017 vor 2 Minuten, masterhawk sagte: Ok, inside your APC.cfg are the entries for Zurich, tegel and Prague. You have the dll for tegel and Zurich. 1. backup your airport controller folder. 2. Uninstall Prague Zurich and tegel 3 install prague 4 Install tegel and zurich 5 copy back backup replacing files 6 install jetway patch. Ok let me try that. Where do I find the jetway patch? When i google it, I just find one for Heathrow? Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted June 28, 2017 Deputy Sheriffs Share Posted June 28, 2017 vor 2 Minuten, Swissdani sagte: So I should now the following correct? 1. Deinstall Zurich and Prague 2. Install Prague and copy whole Aerosoft/APC Folder 3. Deinstall Prague 4. Install Zurich and make a second backup of APC Folder 5. Reinstall Prague and copy the files from both backup APC Folders back to the main one? Or only from the Prague backup? This will work. You just have to copy back Prague in your suggestion. it is important that you have all necessary entries in APC.cfg. the system is similar to exe.xml and dll.xml. There you use the command addon and \addon. In the APC.cfg it is productinfocontainer Link to comment Share on other sites More sharing options...
DarrianCZE 84 Posted June 28, 2017 Share Posted June 28, 2017 1 minute ago, Swissdani said: Ok let me try that. Where do I find the jetway patch? When i google it, I just find one for Heathrow? It's in the first post :-) Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted June 28, 2017 Deputy Sheriffs Share Posted June 28, 2017 vor 1 minute, Swissdani sagte: Ok let me try that. Where do I find the jetway patch? When i google it, I just find one for Heathrow? First post in this topic. Link to comment Share on other sites More sharing options...
Swissdani 1 Posted June 28, 2017 Share Posted June 28, 2017 vor 17 Minuten, masterhawk sagte: First post in this topic. Finally some good news, the Problem seems to be fixed. :-) However after I installed the patch, the problems started again. So I looks like the patch is not for me then Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted June 28, 2017 Deputy Sheriffs Share Posted June 28, 2017 vor 4 Minuten, Swissdani sagte: Finally some good news, the Problem seems to be fixed. :-) However after I installed the patch, the problems started again. So I looks like the patch is not for me then Hm, strange. The patch updates APC to the latest Version. Should work. Also the updated APC is set to run as admin? Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted June 28, 2017 Deputy Sheriffs Share Posted June 28, 2017 One important point. If you try to fly between LKPR and LSZH or any other route between airports using APC, your APC will hang up. You have then to kill it in task manger and restart manually, then you will get back the APC driven components of your destination. It happens every time a APC scenery is loaded after another was already loaded. Also for example LTBA to EDDT with overfly of LKPR area. Link to comment Share on other sites More sharing options...
Swissdani 1 Posted June 28, 2017 Share Posted June 28, 2017 vor 8 Minuten, masterhawk sagte: Hm, strange. The patch updates APC to the latest Version. Should work. Also the updated APC is set to run as admin? Hello Bob You are a star, that was the problem Thank you and also Darrian very much for your help. Finally time to enjoy the scenery. Link to comment Share on other sites More sharing options...
Premek 276 Posted June 29, 2017 Author Share Posted June 29, 2017 14 hours ago, masterhawk said: One important point. If you try to fly between LKPR and LSZH or any other route between airports using APC, your APC will hang up. You have then to kill it in task manger and restart manually, then you will get back the APC driven components of your destination. It happens every time a APC scenery is loaded after another was already loaded. Also for example LTBA to EDDT with overfly of LKPR area. That sounds weird - never meet this before... Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted June 29, 2017 Deputy Sheriffs Share Posted June 29, 2017 vor 25 Minuten, Premek sagte: That sounds weird - never meet this before... My post covers my experience I allready postet in #830 and further on. Link to comment Share on other sites More sharing options...
Premek 276 Posted June 29, 2017 Author Share Posted June 29, 2017 20 minutes ago, masterhawk said: My post covers my experience I allready postet in #830 and further on. Well - it confuses me this behaviour to be there even with 'Jetways missing on arrival' patch. It should solve that issues and it actually does for many :-S Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted June 29, 2017 Deputy Sheriffs Share Posted June 29, 2017 vor 32 Minuten, Premek sagte: Well - it confuses me this behaviour to be there even with 'Jetways missing on arrival' patch. It should solve that issues and it actually does for many :-S It is not the missing jetways. At every APC driven airport you loose everything that is loaded by APC. If you load the sim at any APC airport all is fine at beginning. When you do the flights like I described, boom. Link to comment Share on other sites More sharing options...
Premek 276 Posted June 29, 2017 Author Share Posted June 29, 2017 23 minutes ago, masterhawk said: It is not the missing jetways. At every APC driven airport you loose everything that is loaded by APC. If you load the sim at any APC airport all is fine at beginning. When you do the flights like I described, boom. Even after installing the APC airports the way you've described in post #807? Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted June 29, 2017 Deputy Sheriffs Share Posted June 29, 2017 vor 2 Stunden , Premek sagte: Even after installing the APC airports the way you've described in post #807? Yes. Link to comment Share on other sites More sharing options...
Premek 276 Posted June 30, 2017 Author Share Posted June 30, 2017 As said in the PM - I was convinced that patch fixed the issue for you. Sorry for my misunderstanding. Link to comment Share on other sites More sharing options...
Swissdani 1 Posted July 2, 2017 Share Posted July 2, 2017 Guys Sorry I have to start the whole thing again. Today I wanted to fly out of Zurich and realised all jetways are missing. So I reinstalled Zurich. The jetways are back but now Prague is without any runway lines again!!! The APController is set run as admin and inside the APController folder are all the files from the patch. This is really really frustrating to be honest. Any ideas? Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted July 2, 2017 Deputy Sheriffs Share Posted July 2, 2017 Vor 1 Stunde, Swissdani sagte: Guys Sorry I have to start the whole thing again. Today I wanted to fly out of Zurich and realised all jetways are missing. So I reinstalled Zurich. The jetways are back but now Prague is without any runway lines again!!! The APController is set run as admin and inside the APController folder are all the files from the patch. This is really really frustrating to be honest. Any ideas? Do you have the ressourcesLKPR.dll? Are inside the apc.cfg all the entries? Link to comment Share on other sites More sharing options...
Swissdani 1 Posted July 2, 2017 Share Posted July 2, 2017 vor 31 Minuten, masterhawk sagte: Do you have the ressourcesLKPR.dll? Are inside the apc.cfg all the entries? The ressourcesLKPR.dll is inside the ApController folder. I see some entries in the apc.cfg file, but not sure if they are correct. I attach the file for the experts to have a look. apc.cfg Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted July 2, 2017 Deputy Sheriffs Share Posted July 2, 2017 vor 6 Minuten, Swissdani sagte: The ressourcesLKPR.dll is inside the ApController folder. I see some entries in the apc.cfg file, but not sure if they are correct. I attach the file for the experts to have a look. apc.cfg I woud say, it is looking good. My LKPR section offers more entries, but that shouldn't be a problem. Can you add your fsx.cfg and a screenshot of your airportcontroller folder please? Here is my LKPR section: <ProductInfoContainer xsi:type="AirportSceneryInfoContainer"> <ProductName>Mega Airport Prague</ProductName> <Type>AirportScenery</Type> <ProductVersion> <Major>1</Major> <Minor>0</Minor> <Build>6</Build> <Revision>60709</Revision> </ProductVersion> <ProductFolder>E:\Prepar3D v4\Aerosoft\Mega Airport Prague</ProductFolder> <AirportControllerConfig> <DynamicJetways>true</DynamicJetways> <UsersGroundHandling>true</UsersGroundHandling> <AIGroundHandling>true</AIGroundHandling> <AnimTrafficAirport>false</AnimTrafficAirport> <AnimTrafficPublicArea>false</AnimTrafficPublicArea> <HDTextures>true</HDTextures> <AirportFacilityCustomization>DFLT</AirportFacilityCustomization> </AirportControllerConfig> </ProductInfoContainer> Link to comment Share on other sites More sharing options...
Swissdani 1 Posted July 2, 2017 Share Posted July 2, 2017 vor 1 minute, masterhawk sagte: I woud say, it is looking good. My LKPR section offers more entries, but that shouldn't be a problem. Can you add your fsx.cfg and a screenshot of your airportcontrolleer folder please? Here is my LKPR section: <ProductInfoContainer xsi:type="AirportSceneryInfoContainer"> <ProductName>Mega Airport Prague</ProductName> <Type>AirportScenery</Type> <ProductVersion> <Major>1</Major> <Minor>0</Minor> <Build>6</Build> <Revision>60709</Revision> </ProductVersion> <ProductFolder>E:\Prepar3D v4\Aerosoft\Mega Airport Prague</ProductFolder> <AirportControllerConfig> <DynamicJetways>true</DynamicJetways> <UsersGroundHandling>true</UsersGroundHandling> <AIGroundHandling>true</AIGroundHandling> <AnimTrafficAirport>false</AnimTrafficAirport> <AnimTrafficPublicArea>false</AnimTrafficPublicArea> <HDTextures>true</HDTextures> <AirportFacilityCustomization>DFLT</AirportFacilityCustomization> </AirportControllerConfig> </ProductInfoContainer> Here we go fsx.cfg Please login to display this image. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted July 2, 2017 Deputy Sheriffs Share Posted July 2, 2017 vor 4 Minuten, Swissdani sagte: Here we go fsx.cfg Please login to display this image. Ok, I can't find any error. How did you find out out the error in Prague? You started in zurich and then relocated to prague? Have you tried to restart the sim and direct go to prague? Link to comment Share on other sites More sharing options...
Swissdani 1 Posted July 2, 2017 Share Posted July 2, 2017 vor 14 Minuten, masterhawk sagte: Ok, I can't find any error. How did you find out out the error in Prague? You started in zurich and then relocated to prague? Have you tried to restart the sim and direct go to prague? Correct I was in Zurich and checked if the jetways were back. Then I directly move to Prague and saw the old problem. Same thing if I restart FSX and go direct to Prague. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted July 2, 2017 Deputy Sheriffs Share Posted July 2, 2017 vor 8 Stunden , Swissdani sagte: Correct I was in Zurich and checked if the jetways were back. Then I directly move to Prague and saw the old problem. Same thing if I restart FSX and go direct to Prague. Hi, then I have no further idea. You can try the diagnostic tool from post #1. If that has no hint, you can try reinstall of LKPR. Link to comment Share on other sites More sharing options...
Swissdani 1 Posted July 11, 2017 Share Posted July 11, 2017 So guys some follow-up. I reinstalled all 3 sceneries again. Prague was fine. It did not matter if I start AP Controller as Administrator or normal. Runway just was as it should be. However I still got the jetway problem in Zurich. I used the diagnostic tool and all was just fine, no errors. As soon as I installed the jetway patch, Prague was bad again. So this patch for me doesn't work together with Prague. But what about Zurich. In an act of hope I started AES and pressed the resync button and bang. Jetways back in Zurich and Prague still fine. So at the Moment I am on a good way. Now let's just hope. It stays this way :-) Link to comment Share on other sites More sharing options...
DarrianCZE 84 Posted July 11, 2017 Share Posted July 11, 2017 32 minutes ago, Swissdani said: So guys some follow-up. I reinstalled all 3 sceneries again. Prague was fine. It did not matter if I start AP Controller as Administrator or normal. Runway just was as it should be. However I still got the jetway problem in Zurich. I used the diagnostic tool and all was just fine, no errors. As soon as I installed the jetway patch, Prague was bad again. So this patch for me doesn't work together with Prague. But what about Zurich. In an act of hope I started AES and pressed the resync button and bang. Jetways back in Zurich and Prague still fine. So at the Moment I am on a good way. Now let's just hope. It stays this way :-) Hello again :-) If you want, I'd like to arrange a Teamviewer session where I would check your settings, your installation, and so on. Maybe we will find the reason why this is happening. Send me a PM, please. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.