DarrianCZE 84 Posted June 20, 2017 Share Posted June 20, 2017 Hi, well... you're saying that you have issues with SODE. Unfortunately Prague is not using SODE. If you can see the taxiways and lights, then the issue is not with Prague. Link to comment Share on other sites More sharing options...
Premek 276 Posted June 20, 2017 Author Share Posted June 20, 2017 1 hour ago, henry23 said: Hi Premek, I am now having serious issues with sode both in Pd3 v3.4 and P3dV4. P3DV3-diagnostic.log I think you wanted to write APC instead of SODE as I do not see any evidence of SODE in the log file ;-) Looks like bit of a mess in the installation. I guess TV session will be the best way. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted June 20, 2017 Deputy Sheriffs Share Posted June 20, 2017 @Premek I think he is talking about SODE. The platform manager belongs to that tool. @henry23 Since version 1.5.x SODE does not use any longer exe and dll xml files. You should: 1. delete any SODE related entries in dll and exe xml (both locations for each) 2. clear SODE from simobjects.cfg AND add-on.cfg #above steps for all your sims 3. Backup your xml and simobjects files in the SODE folder under C:\ProgramData\12bPilots\SODE 4. uninstall SODE 5. reinstall latest SODE I think you had previously installed SODE 1.4.2 and than updated to 1.5.x. SODE should have done the needed corrections itself. But in your case something gone wrong. And then please switch to this topic: Try reading this post: Link to comment Share on other sites More sharing options...
henry23 4 Posted June 21, 2017 Share Posted June 21, 2017 Thank you so much for your help, especially Masterhawk. I followed your instructions and everything is now working properly. I could see where the problem was but had no idea how to fix it. It was quite simple in the end. Thank you. Link to comment Share on other sites More sharing options...
vojtech2000 0 Posted June 26, 2017 Share Posted June 26, 2017 Good afternoon, My name's Vojtech Cerny and i would like to ask you, if you could help me with issue UNKWN/TYPE I was trying to run HarvesterLauncher.bat even as an administrator but I'm still getting UNKWN/TYPE on VSDG => not working jetways. I install Mega Airport Prague for P3dv4 based on an article posted in this topic. Thank you very much for your support and wish you good day, Vojtech Cerny Aditional info: Simulator: P3Dv4 OS: Windows 10 64 bit Addons: ORBX (global, europelc, treeshd), AS2016, ASCA, PMDG 777, GSX, FSUIPC (free version), and others airport scenery (flytampa) DLL.XML exe.xml simobjects.cfg scenery.cfg Prepar3D.cfg Please login to display this image. Link to comment Share on other sites More sharing options...
Premek 276 Posted June 26, 2017 Author Share Posted June 26, 2017 Ahoj Vojto What add-on/aircraft do you use? Premek Link to comment Share on other sites More sharing options...
vojtech2000 0 Posted June 26, 2017 Share Posted June 26, 2017 Dobrý den Přemku, I'm using an PMDG 777, GSX, FSUIPC free - demo version, ORBX Global base, ORBX Europe openLC, ORBX TreesHD, Activesky2016, ASCA Thank you, Vojtech Link to comment Share on other sites More sharing options...
Premek 276 Posted June 26, 2017 Author Share Posted June 26, 2017 Okay - expect someone from XHT-Labs write to your mail soon(ish). Link to comment Share on other sites More sharing options...
vojtech2000 0 Posted June 26, 2017 Share Posted June 26, 2017 Problem solved, some error in HarvesterLauncher.bat. Thank you very much for fast support :-) Thumbs up for your work! Link to comment Share on other sites More sharing options...
Premek 276 Posted June 27, 2017 Author Share Posted June 27, 2017 The Prague airport celebrates 80 years this year and there was a document about it broadcast yesterday. Unfortunately in Czech language only: http://www.ceskatelevize.cz/ivysilani/11660566862-pribeh-letiste-praha/21656226622 Link to comment Share on other sites More sharing options...
Swissdani 1 Posted June 27, 2017 Share Posted June 27, 2017 Hi there I also have problems with my Prague scenery. The ground textures are very blurry and there are no taxiway or runway lines. I already was in contact with Tom Weigandt from the Aerosoft Support, but couldn't get any better results. For this reason he advised me to post here. We checked already that AP Controller is working and SODE Version 1.4.2 is installed. I do also have Aerosoft Zurich scenery, which is running perfectly. I am using FSX with SP2 installed. Any ideas what else I could try? Kind regards Daniel Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
DarrianCZE 84 Posted June 27, 2017 Share Posted June 27, 2017 43 minutes ago, Swissdani said: Hi there I also have problems with my Prague scenery. The ground textures are very blurry and there are no taxiway or runway lines. I already was in contact with Tom Weigandt from the Aerosoft Support, but couldn't get any better results. For this reason he advised me to post here. We checked already that AP Controller is working and SODE Version 1.4.2 is installed. I do also have Aerosoft Zurich scenery, which is running perfectly. I am using FSX with SP2 installed. Any ideas what else I could try? Kind regards Daniel Please login to display this image. Please login to display this image. Please login to display this image. Hi Daniel, you are having this issue because Airport Controller is not running properly. Could you please send here following files? exe.xml simobjects.cfg Thanks :-) Darrian Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted June 27, 2017 Deputy Sheriffs Share Posted June 27, 2017 @Swissdani You also have installed Zurich, then there is an issue with the installers. Then you should check: I Inserted my apc.cfg and a screenshot of my APC folder (the backup folders are from me, see above link). Please login to display this image. apc.cfg Link to comment Share on other sites More sharing options...
Swissdani 1 Posted June 28, 2017 Share Posted June 28, 2017 On 27.06.2017 at 08:56, DarrianCZE sagte: Hi Daniel, you are having this issue because Airport Controller is not running properly. Could you please send here following files? exe.xml simobjects.cfg Thanks :-) Darrian Hello Darrian Togehter with the aerosoft support we were checking via the Taskmanager that AP Controller is running. This test was fine. I can not find a simobjects.cfg file, where would that be stored? I added fsx.cfg though, maybe this helps. Kind regards Daniel exe.xml fsx.cfg Link to comment Share on other sites More sharing options...
DarrianCZE 84 Posted June 28, 2017 Share Posted June 28, 2017 34 minutes ago, Swissdani said: Hello Darrian Togehter with the aerosoft support we were checking via the Taskmanager that AP Controller is running. This test was fine. I can not find a simobjects.cfg file, where would that be stored? I added fsx.cfg though, maybe this helps. Kind regards Daniel exe.xml fsx.cfg Are you running FSX as an administrator? Is the APController.exe set to run as an administrator? If not, try to enable it in the Compatilibity tab of the file properties. Or vice versa. Link to comment Share on other sites More sharing options...
Swissdani 1 Posted June 28, 2017 Share Posted June 28, 2017 vor 19 Minuten, DarrianCZE sagte: Are you running FSX as an administrator? Is the APController.exe set to run as an administrator? If not, try to enable it in the Compatilibity tab of the file properties. Or vice versa. FSX always as an admin. APCcontroller.exe was without admin rights. Just changed to admin rights as well, but the result is still the same. No effect at all. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted June 28, 2017 Deputy Sheriffs Share Posted June 28, 2017 vor 1 minute, Swissdani sagte: FSX always as an admin. APCcontroller.exe was without admin rights. Just changed to admin rights as well, but the result is still the same. No effect at all. Hi do you run Zurich v2? If yes, was it installed prior Prague? Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted June 28, 2017 Deputy Sheriffs Share Posted June 28, 2017 Your simobjects are stored inside your fsx.cfg and not inside a simobjects.cfg, that does only P3D. Link to comment Share on other sites More sharing options...
Swissdani 1 Posted June 28, 2017 Share Posted June 28, 2017 vor 9 Minuten, masterhawk sagte: Hi do you run Zurich v2? If yes, was it installed prior Prague? Yes and Yes. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted June 28, 2017 Deputy Sheriffs Share Posted June 28, 2017 Vor 1 Stunde, Swissdani sagte: Hello Darrian Togehter with the aerosoft support we were checking via the Taskmanager that AP Controller is running. This test was fine. I can not find a simobjects.cfg file, where would that be stored? I added fsx.cfg though, maybe this helps. Kind regards Daniel exe.xml fsx.cfg There is an error inside your fsx.cfg. In the [Main] section your simobjects are stored. The numbering of your different entries is not continuous. You are missing number 9. You should move the lines with number 10 and 11 direct under line 8 and then renumber them to 9 and 10. Link to comment Share on other sites More sharing options...
DarrianCZE 84 Posted June 28, 2017 Share Posted June 28, 2017 Just now, masterhawk said: There is an error inside your fsx.cfg. In the [Main] section your simobjects are stored. The numbering of your different entries is not continuous. You are missing number 9. You should move the lines with number 10 and 11 direct under line 8 and then renumber them to 9 and 10. Thanks Masterhawk! Got infected by P3D a bit Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted June 28, 2017 Deputy Sheriffs Share Posted June 28, 2017 vor 7 Minuten, Swissdani sagte: Yes and Yes. Then it is very likely that you are also suffering the installer issue I mentioned above. Pleas check inside the airport controller folder if you have a file RessourcesLKPR.dll and if you have the LKPR entries inside the APC.cfg file. Link to comment Share on other sites More sharing options...
Swissdani 1 Posted June 28, 2017 Share Posted June 28, 2017 vor 4 Minuten, masterhawk sagte: Then it is very likely that you are also suffering the installer issue I mentioned above. Pleas check inside the airport controller folder if you have a file RessourceLKPR.dll and if you have the LKPR entries inside the APC.cfg file. Seems like there are missing. The error in the fsx.cfg is already corrected, thanks a lot for that Please login to display this image. apc.cfg Link to comment Share on other sites More sharing options...
Swissdani 1 Posted June 28, 2017 Share Posted June 28, 2017 On 27.06.2017 at 19:17, masterhawk sagte: @Swissdani You also have installed Zurich, then there is an issue with the installers. Then you should check: I Inserted my apc.cfg and a screenshot of my APC folder (the backup folders are from me, see above link). Please login to display this image. apc.cfg So I should now the following correct? 1. Deinstall Zurich and Prague 2. Install Prague and copy whole Aerosoft/APC Folder 3. Deinstall Prague 4. Install Zurich and make a second backup of APC Folder 5. Reinstall Prague and copy the files from both backup APC Folders back to the main one? Or only from the Prague backup? Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted June 28, 2017 Deputy Sheriffs Share Posted June 28, 2017 vor 9 Minuten, Swissdani sagte: Seems like there are missing. The error in the fsx.cfg is already corrected, thanks a lot for that Please login to display this image. apc.cfg Ok, inside your APC.cfg are the entries for Zurich, tegel and Prague. You have the dll for tegel and Zurich. 1. backup your airport controller folder. 2. Uninstall Prague Zurich and tegel 3 install prague 4 Install tegel and zurich 5 copy back backup replacing files 6 install jetway patch. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.