Premek 276 Posted January 26, 2017 Author Share Posted January 26, 2017 @masterhawk Thanks! This is what I was afraid of. :-( Anyway it should be proven first - will ask Aerosoft guys to investigate. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted January 26, 2017 Deputy Sheriffs Share Posted January 26, 2017 @Premek Thanks. Observatios: Zurich damages Prague Prague doesn't install correct after Zurich only in the second round exist a P3DProxy.dll but a lot other files are missing in first round RessourcesLSZH.dll is missing All in all very strange. And all that has to be crosschecked against Split and Tegel. I think aerosoft has now a lot to do. Sorry guys. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted January 26, 2017 Deputy Sheriffs Share Posted January 26, 2017 @Premek I have a solution for at least LSZH and LKPR. Both Airports are working. How long has it now taken to find the bug? One year? 1. Install LKPR (Backup APC Folder) 2. Deinstall LKPR 3. Install LSZH (Backup APC Folder) 4. Install LKPR 5. Copy back the Content of the backuped LKPR APC Folder 6. Check the entries of APC.cfg with the backup APC.cfg's (the system is similar to exe.xml/dll.xml -- I attached my working file) 7. Add the Jetway Patch With the same method it should be possible to fix also Tegel and Split, if there is a similar error in the installers until aerosoft releases fixed installers. Waht is going wrong: 1. LSZH after LKPR The installer does not add anything new to the APC folder (the APC.cfg entry is done), because it ckecks, that APC is already installed. So the LSZH ressource and P3DProxy is missing, that leads to an internal APC error that results in nonworking at LKPR. 2. LKPR after LSZH The installer does not add anything new to the APC folder, because it ckecks, that APC is already installed. So a lot LKPR files are missing, that leads to the APC error at LKPR. Wy offers LSZH a P3DProxy.dll? In LKPR and in the jetwaypatch is no P3DProxy.dll. Now I have both P3DProxy and FSXProxy. My working APC cfg: apc.cfg My working APC Folder: Please login to display this image. Link to comment Share on other sites More sharing options...
yakyak 19 Posted January 26, 2017 Share Posted January 26, 2017 I think you deserve a medal @masterhawk Link to comment Share on other sites More sharing options...
Premek 276 Posted January 27, 2017 Author Share Posted January 27, 2017 9 hours ago, yakyak said: I think you deserve a medal @masterhawk Fully agree!!!!! :-) Link to comment Share on other sites More sharing options...
Administrator Guenter Zehnel 77 Posted January 27, 2017 Administrator Share Posted January 27, 2017 Hello, @masterhawk thanks a lot for your investigation. We will check all of our installer regarding the APC. Link to comment Share on other sites More sharing options...
Pedrodowd 8 Posted January 28, 2017 Share Posted January 28, 2017 Sounds hopeful! Well done Masterhawk! Could someone supply the missing files for pasting into the AP controller folder? My cfg file is correct from the looks of it. If I understand you correctly we just need the missing .dll files that are missing for AP controller to function again? Thanks again Pete Link to comment Share on other sites More sharing options...
Premek 276 Posted January 29, 2017 Author Share Posted January 29, 2017 Hi all just a clarification about files: P3DProxy.dll - is no more necessary and it will have no influence on functionality if present or missing; Resources[XXXX].dll (where [XXXX] is airport ICAO code) - this file is related to particular airport. Until Aerosoft fixes installers of all airports using APC masterhawk's workaround is the best way to get APC airport working. Link to comment Share on other sites More sharing options...
Hisham Selim 6 Posted January 29, 2017 Share Posted January 29, 2017 Hi mr Premek, Is there any solution for those missing stuff? Followed every solution in this topic, but still nothing. When just arriving at Praque at night there where no runway lights, no papi, no runway/taxiway marks and no jetways. Apc was running!! Departing everything is ok. Also submitted a support ticket. Best regards John The same issue as I posted it very early Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Premek 276 Posted January 29, 2017 Author Share Posted January 29, 2017 @Hisham Selim As I wrote in post above - please follow masterhawk's workaround. Link to comment Share on other sites More sharing options...
kaminho 0 Posted January 29, 2017 Share Posted January 29, 2017 Hello. I´ve purchased and installed Prag 1.05 yesterday. At daytime everything looks very good but at night the buildings become transparent as you see on the pictures. Is this a known issue with the airport? Run on P3D V3.4 HF2. No other APC controlled Airports installed so far. Greetings 2017-1-29_1-42-27-94.bmp 2017-1-29_1-42-39-500.bmp Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted January 29, 2017 Deputy Sheriffs Share Posted January 29, 2017 vor 1 hour , Hisham Selim sagte: The same issue as I posted it very early Sent from my iPhone using Tapatalk vor 1 hour , kaminho sagte: Hello. I´ve purchased and installed Prag 1.05 yesterday. At daytime everything looks very good but at night the buildings become transparent as you see on the pictures. Is this a known issue with the airport? Run on P3D V3.4 HF2. No other APC controlled Airports installed so far. Greetings 2017-1-29_1-42-27-94.bmp 2017-1-29_1-42-39-500.bmp You should make sure, that the simobjects and APC.exe are registerd correct and that APC and flightsim are running both with the same privilegs (admin yes or no). @Hisham Selim Have you added the missing jetway patch from post #1? http://forum.aerosoft.com/applications/core/interface/file/attachment.php?id=88503 @kaminho have you added any shader tool like PTA? Try to disable it. Have you tried different settings in P3D? What driver are you running, I'm on AMD 17.1.1 Have you cleared the shaderfolder after driver or P3D update? My night visuals are ok. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Premek 276 Posted January 29, 2017 Author Share Posted January 29, 2017 1 hour ago, masterhawk said: @kaminho have you added any shader tool like PTA? Try to disable it. Have you tried different settings in P3D? What driver are you running, I'm on AMD 17.1.1 Have you cleared the shaderfolder after driver or P3D update? Thanks @masterhawk - that would be my advice too :-) Link to comment Share on other sites More sharing options...
BJHawk 5 Posted January 29, 2017 Share Posted January 29, 2017 Hi all, I just came back to FSX-SE after some time. And I discovered the jetways are not moving. CTRL+J not working (is assigned, default gateways work), GSX tells me it has default jetways, Advanced Animations are enabled, Dynamic Jetways enabled in Config tool provided. I have no other scenery I read about (Split, Zurich) installed. Already did clean LKPR install. Tried with PMDG 737, 777, default 737, Default A321 I cannot remember if they were working previously on my install, I know I had v1.05 installed before. Everything else work, ground poly, GSX, they are present on arrival.... Link to comment Share on other sites More sharing options...
Er!k 572 Posted January 29, 2017 Share Posted January 29, 2017 @masterhawk Which install order would you recommend in case I also use Split as well? And there was a nojetwaysonarrival patch, is this one needed as well? Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted January 29, 2017 Deputy Sheriffs Share Posted January 29, 2017 vor 11 Minuten, Er!k sagte: @masterhawk Which install order would you recommend in case I also use Split as well? And there was a nojetwaysonarrival patch, is this one needed as well? I would: 1. install everyone first separate (install & deinstall), backup the APC folder for each one. 2. Install all of them in one run 3. check the APC.exe version in the backups and copy back the backupos with the oldest ones first. (don't touch apc.cfg, because it sholud be ok, but you can ckeck it, to be sure.) 4. last thing is the patch, because it offers the newest APC.exe (I use it). Link to comment Share on other sites More sharing options...
BJHawk 5 Posted January 29, 2017 Share Posted January 29, 2017 4 hours ago, BJHawk said: Hi all, I just came back to FSX-SE after some time. And I discovered the jetways are not moving. CTRL+J not working (is assigned, default gateways work), GSX tells me it has default jetways, Advanced Animations are enabled, Dynamic Jetways enabled in Config tool provided. I have no other scenery I read about (Split, Zurich) installed. Already did clean LKPR install. Tried with PMDG 737, 777, default 737, Default A321 I cannot remember if they were working previously on my install, I know I had v1.05 installed before. Everything else work, ground poly, GSX, they are present on arrival.... OK, got it working, all I have to do is kill APControler in Task Manager once the game is loaded and start it again manualy...... Any idea what's wrong? Link to comment Share on other sites More sharing options...
Er!k 572 Posted January 29, 2017 Share Posted January 29, 2017 3 hours ago, masterhawk said: I would: 1. install everyone first separate (install & deinstall), backup the APC folder for each one. 2. Install all of them in one run 3. check the APC.exe version in the backups and copy back the backupos with the oldest ones first. (don't touch apc.cfg, because it sholud be ok, but you can ckeck it, to be sure.) 4. last thing is the patch, because it offers the newest APC.exe (I use it). Still no luck... Same issue still occurs. Starting at LKPR and then go to LSZH OK. Starting at LSZH and then go to LKPR; still missing ground etc. Below a screenshot of my APC folder: Please login to display this image. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted January 29, 2017 Deputy Sheriffs Share Posted January 29, 2017 vor 58 Minuten, Er!k sagte: Still no luck... Same issue still occurs. Starting at LKPR and then go to LSZH OK. Starting at LSZH and then go to LKPR; still missing ground etc. Below a screenshot of my APC folder: Please login to display this image. Hi, I will check tomorrow evening, now it's to late. Maybe Premek has some idea. Link to comment Share on other sites More sharing options...
Pedrodowd 8 Posted January 30, 2017 Share Posted January 30, 2017 Hi chaps just a quick update. With masterhawk's solution AND the no jetway patch, I now have the scenery working as it should at load in. flying between zurich and prague though i have no textures on arrival at lkpr cheers! Pete Link to comment Share on other sites More sharing options...
Pedrodowd 8 Posted January 30, 2017 Share Posted January 30, 2017 The only way to get it to work once you have loaded zurich is to stop ap-controller in the task manager, then restart it. the textures re-appear at lkpr when ap-controller restarts. Link to comment Share on other sites More sharing options...
Guhijo 0 Posted January 30, 2017 Share Posted January 30, 2017 Is the fix posted above the same if I only have LKPR? I haven't bought Zurich, Tegel, or Split. Thanks Link to comment Share on other sites More sharing options...
Pedrodowd 8 Posted January 30, 2017 Share Posted January 30, 2017 guhijo if you only have LKPR i would suggest you only need to install the patch for the scenery to work Link to comment Share on other sites More sharing options...
kaminho 0 Posted January 30, 2017 Share Posted January 30, 2017 On 29.1.2017 at 10:56, masterhawk sagte: You should make sure, that the simobjects and APC.exe are registerd correct and that APC and flightsim are running both with the same privilegs (admin yes or no). @Hisham Selim Have you added the missing jetway patch from post #1? http://forum.aerosoft.com/applications/core/interface/file/attachment.php?id=88503 @kaminho have you added any shader tool like PTA? Try to disable it. Have you tried different settings in P3D? What driver are you running, I'm on AMD 17.1.1 Have you cleared the shaderfolder after driver or P3D update? My night visuals are ok. Please login to display this image. Please login to display this image. Hello. PTA causes the issue. Without PTA it´s okay. Thank you! Greetings Link to comment Share on other sites More sharing options...
Premek 276 Posted January 30, 2017 Author Share Posted January 30, 2017 @kaminho Thanks for an update ;-) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.