stijnsarah18 1 Posted January 1, 2017 Share Posted January 1, 2017 Ok i solved the problem... My Apcontroller.exe wasn't in my exe.xml file and wasn't running when opening LKPR. I added the entry now and it's all working... Link to comment Share on other sites More sharing options...
Hpinter 1 Posted January 5, 2017 Share Posted January 5, 2017 I have the same Problem :(. It does not show me the Jetways an strange taxiways on Apron. It is really strange. I have installed the APC from the 1. Site in this thread. I have ORBX and i have disable LKPR. Link to comment Share on other sites More sharing options...
data63 421 Posted January 5, 2017 Share Posted January 5, 2017 you installed it - but "does it run?" - (see post above yours) Link to comment Share on other sites More sharing options...
Hpinter 1 Posted January 5, 2017 Share Posted January 5, 2017 sorry my english is not very good. what do you mean exactly, with "you installed it"? Link to comment Share on other sites More sharing options...
data63 421 Posted January 5, 2017 Share Posted January 5, 2017 you wrote "I have installed the APC from the 1. Site in this thread" that doesn't automatically mean "it runs" as it has to be started from FSX/P3D which need the entry in the exe.xml file Link to comment Share on other sites More sharing options...
Hpinter 1 Posted January 5, 2017 Share Posted January 5, 2017 But the APC is in the "exe_xml_Mega Airport Prag". It looks like the same like for the Zurich V 2.0 Link to comment Share on other sites More sharing options...
Premek 276 Posted January 6, 2017 Author Share Posted January 6, 2017 @Hpinter Did you already contact Aerosoft support as suggested? The best benefit for you (I'd say) they can communicate with you in German ;-) Link to comment Share on other sites More sharing options...
Terblanche 118 Posted January 6, 2017 Share Posted January 6, 2017 @Premek - is there a reason why APCONTROLLER will load twice in Task Manager when in P3D ...? I haven't installed or reinstalled any scenery with APC only a few aircraft and ORBX scenery. I see APC only once in exe.xml ... and in prepar3D.cfg the SimObejectPaths are lined up correctly under [MAIN] Regards Terblanche Link to comment Share on other sites More sharing options...
Premek 276 Posted January 6, 2017 Author Share Posted January 6, 2017 @Terblanche Hi Terblanche - could it be you have duplicate entries exe.xml ( I mean the same entry in both possible locations - %appdata% and %programdata%)? Link to comment Share on other sites More sharing options...
Terblanche 118 Posted January 6, 2017 Share Posted January 6, 2017 @Premek - yip, there is an entry in both ... which one should be the correct one?? Link to comment Share on other sites More sharing options...
Premek 276 Posted January 7, 2017 Author Share Posted January 7, 2017 @Terblanche Based on THIS article in P3D documentation the entry should be preferably in %programmdata% Link to comment Share on other sites More sharing options...
Terblanche 118 Posted January 7, 2017 Share Posted January 7, 2017 Thank you @Premek - does that mean I can delete the entry in %AppData% ....? I'm just tickled why APC appears twice in Task Manager. Link to comment Share on other sites More sharing options...
Premek 276 Posted January 7, 2017 Author Share Posted January 7, 2017 2 hours ago, Terblanche said: does that mean I can delete the entry in %AppData% ....? Yes. 2 hours ago, Terblanche said: I'm just tickled why APC appears twice in Task Manager. No clue :-| Link to comment Share on other sites More sharing options...
Guhijo 0 Posted January 8, 2017 Share Posted January 8, 2017 On 1/1/2017 at 10:55 AM, stijnsarah18 said: Ok i solved the problem... My Apcontroller.exe wasn't in my exe.xml file and wasn't running when opening LKPR. I added the entry now and it's all working... I'm a little confused here. What exe.xml file? Do you have a directory or a way I can find this file so I can add apcontroller into it? @Premek I have a problem where about 5 miles out on final, the whole airport goes black, the reappears a moment later without jetways. I can manually start apcontroller.exe, but when I do so, my FPS goes down the dump. My VAS was able to stay constant throughout the flight, even during the flicker, and I loaded the flight in Prague before making the flight itself. Thanks Link to comment Share on other sites More sharing options...
darem 106 Posted January 9, 2017 Share Posted January 9, 2017 And the next one with that problem. Funny thing is I had it working with 1.04 (although there were a lot of other problems), but now with the latest version in P3D, this place looks like it has been built on grass. And I checked the simobjects, the exe, the apc running and so on - everything should be fine. Although I notice that apc tends to crash a lot, but this isn't related to the problem seen in the pic, since this problem is there with apc running or not. I am close to asking for a refund. Prague has given me nothing but headaches. And I am no noob, I know my way around with the sim... Please login to display this image. Link to comment Share on other sites More sharing options...
Premek 276 Posted January 9, 2017 Author Share Posted January 9, 2017 @darem I'm sorry - it looks like squeezed P3D installation. This texture has NOTHING to do with LKPR and/or AirportController. Did you contacted Aerosoft support? Do you use any ORBX product? Link to comment Share on other sites More sharing options...
darem 106 Posted January 9, 2017 Share Posted January 9, 2017 No, it has nothing to do with Prague, I agree. It has something to do witn the fact that that the textures of Prague do not show up. It's the same Problem all the others here have. BTW, all parking positions are GA, is this like it should be? Here's a Picture from above: Please login to display this image. Link to comment Share on other sites More sharing options...
darem 106 Posted January 9, 2017 Share Posted January 9, 2017 Ok, I solved the Problem, and maybe this helps others as well: 1) I uninstalled Prague. 2) I removed the AirportController Directory from the Aerosoft Directory within P3D 3) I reinstalled Prague. Everything is now showing up as it should. I conclude that the Problem lies within the AirportController configuration file. It seems to get messed up if Prague is installed in Addition to an Airport that uses APC as well (in my case Tegel, EDDT). I checked Tegel after the reinstall, no ill side effects. I hope that this helps others with this Problem which seems to be very common. Link to comment Share on other sites More sharing options...
michalis 14 Posted January 11, 2017 Share Posted January 11, 2017 On 09/01/2017 at 7:01 PM, darem said: Ok, I solved the Problem, and maybe this helps others as well: 1) I uninstalled Prague. 2) I removed the AirportController Directory from the Aerosoft Directory within P3D 3) I reinstalled Prague. Everything is now showing up as it should. I conclude that the Problem lies within the AirportController configuration file. It seems to get messed up if Prague is installed in Addition to an Airport that uses APC as well (in my case Tegel, EDDT). I checked Tegel after the reinstall, no ill side effects. I hope that this helps others with this Problem which seems to be very common. I Just Want To Say ... Thank you Very Much ! I had This Problem as well and I couldn't solve it . I Followed your Advice , and everything is working Perfect Now !!! I Appreciated it ! Mike Link to comment Share on other sites More sharing options...
Pilot Pete 1 Posted January 14, 2017 Share Posted January 14, 2017 Okay, I am at a loss here. Have tried the fix above and to no success. I am using FSX-SE, I get no runway and taxiway lines and missing jetways. Any other ideas? I have about 60 aerosoft sceneries and have never seen anything like this before. Any other ideas would be greatly appreciated. By the way, I don't have Aerosoft LSZH for the record. Cheers, Pete Link to comment Share on other sites More sharing options...
Pilot Pete 1 Posted January 14, 2017 Share Posted January 14, 2017 So I managed to get the jetways and taxi and runway lines to reaappear. Everything seemed okay. However, I switched to EDDF and then back to LKPR, and the lines were still there but the jetways are gone now. What's the deal? Cheers, Pete Link to comment Share on other sites More sharing options...
Premek 276 Posted January 14, 2017 Author Share Posted January 14, 2017 @Pilot Pete Hi Pete - did you try the JetwaysMissingOnArrivalPatch.zip from first post? Link to comment Share on other sites More sharing options...
Pilot Pete 1 Posted January 15, 2017 Share Posted January 15, 2017 Thanks, I didn't have to install the patch but I do think everything is working properly now. Cheers, Pete Link to comment Share on other sites More sharing options...
Pedrodowd 8 Posted January 15, 2017 Share Posted January 15, 2017 Please guys can we have a fix to this problem. All solutions suggested on this thread have failed for me! Any further help would be greatly appreciated. Link to comment Share on other sites More sharing options...
Premek 276 Posted January 15, 2017 Author Share Posted January 15, 2017 @Pedrodowd Did you contact Aerosoft support please? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.