iFlyCZ 2 Posted August 1, 2016 Share Posted August 1, 2016 I heaven't applied the fix when I did a return flight from PRG to LHR, but when I returned, on the final, I noticed that the ground poly appeared pretty late, somewhere about 2 miles final to rwy 24. when I landed, the ground poly was there, but jetways were not. so I restarted the APC and it all worked again. I will try it next time with fix applied. Link to comment Share on other sites More sharing options...
Premek 276 Posted August 1, 2016 Author Share Posted August 1, 2016 3 hours ago, iFlyCZ said: I heaven't applied the fix when I did a return flight from PRG to LHR, but when I returned, on the final, I noticed that the ground poly appeared pretty late, somewhere about 2 miles final to rwy 24. when I landed, the ground poly was there, but jetways were not. so I restarted the APC and it all worked again. I will try it next time with fix applied. Thanks! Results of return flight with fix applied will be highly appreciated ;-) Link to comment Share on other sites More sharing options...
Jude 190 Posted August 1, 2016 Share Posted August 1, 2016 I'll let you know after testing. Â Link to comment Share on other sites More sharing options...
iFlyCZ 2 Posted August 1, 2016 Share Posted August 1, 2016 So, I tried LKPR-EETN, but unfortunatelly, I forgot about the fix, and when I aplied it with flight sim running, APC gave me a crash :/ Link to comment Share on other sites More sharing options...
gforce800 50 Posted August 3, 2016 Share Posted August 3, 2016 Hi Premek, i updated to 1.05 yesterday and i must really say thanks for fixing the FPS issues! However i have a small issue with the jetways, every time i load P3D with an aircraft on a stand, the jetway is still stuck on the default position and won't move when i press Ctrl+J. Only a restart of APC helps. So would appreciate if you could take a look on this. Thanks Link to comment Share on other sites More sharing options...
Premek 276 Posted August 3, 2016 Author Share Posted August 3, 2016 To be honest I'm bafled by the fact 1.05 looks to be more fragile than 1.04. The change I did should not cause it at all. Please be patient I'm walking through the code and trying to identify the problematic code. Â In case you'll be able reproduce the issue (and describe in detail the way HOW to reproduce it) please post it here. Thanks. Link to comment Share on other sites More sharing options...
conz16 0 Posted August 7, 2016 Share Posted August 7, 2016 hey guys and especially premek i installed v.1.05 and i have no visual guidance system and my jetways are not working. i ran the harvesterlauncher.bat multiple times, but that changed nothing engines were off and parking brake was set and no jetway is working and the guidance system isn´t working at all. i hope someone can help me and solve that problem.  Greetings  Link to comment Share on other sites More sharing options...
Swisspilot 235 Posted August 11, 2016 Share Posted August 11, 2016 Hi Premek  Also in my case, not every Jetway is working with CTRL+J. Some are not moving. Before I applied your fixed files, I always get an couatl.crash when asking for the Jetways with Maddog Md80. I updated to the latest Addon Manager. After using your fixed files, couatl. didn't crash anymore but still not all jetways are working with CTRL+J  I.E. Jetways Gate 5-7 don't move by pressing CTRL+J (at least not with Maddog).  Kind Regards Patrick  Here is my latest couatl.err befoe using your latest files. couatl v3.1 (build 3532) panic log started on Thu Aug 11 14:35:21 2016 problem raised by addon <unknown> Traceback (most recent call last):  File "couatl\GSX\assistanceServices\__init__.py", line 1350, in willMaterialize  File "couatl\common\criticalsection.py", line 23, in _synchronized  File "couatl\GSX\assistanceServices\pushBack.py", line 106, in materialize  File "couatl\common\criticalsection.py", line 23, in _synchronized  File "couatl\GSX\assistanceServices\baseAssistanceVehicle.py", line 93, in materialize  File "couatl\GSX\assistanceServices\baseAssistanceVehicle.py", line 127, in setAnimationChannel AssertionError: attempt to use an invalid SimObject instance {'Airport': 'LKPR', 'Requested assistance services at': 'Gate 7', 'User Pos': (50.109607697735626, 14.268361095566444, 382.479 m, 2.37895 m, 64.66288738989157)}  Link to comment Share on other sites More sharing options...
Premek 276 Posted August 11, 2016 Author Share Posted August 11, 2016 @Swisspilot Did you run HarvesterLauncher.bat? And if yes -0 could you see VDGS working? Link to comment Share on other sites More sharing options...
Swisspilot 235 Posted August 11, 2016 Share Posted August 11, 2016 It seems as it's very unstable. 1. Situation: Run HarvesterLauncher.bat as admin. set to Prague with MD83 Maddog. VDGS was visable at Gate 6 but Jetways didn't move by pressing CTRL-J. 2. Changed to AS A320. No VDGS no moving Jetways. 3. Choose another Airport and AS A319. 4. Went back to Prage Gate 6 VDGS Visable again and Jetways were moving. 5. Changed to MD83. The Jetways smoothly went back to the origin position. Couldn't reactivate them by pressing CTRL-J. Â If I press "operate Jetways" in GSX menu, it appears "This gate has a default jetway." So it seems as sometimes it works and sometims not. Why not include additional AES or SODE to Prague for those who want to use it? I think it would be a good solution. Â Hope you find a solution. Regards Patrick Link to comment Share on other sites More sharing options...
Premek 276 Posted August 12, 2016 Author Share Posted August 12, 2016 Will try to find it out today as I'm leaving tomorrow for holidays and be back in September.  I also changed the first post - from now on, please send your e-mails directly to support@aerosoft.de   Link to comment Share on other sites More sharing options...
Hisham Selim 6 Posted August 20, 2016 Share Posted August 20, 2016 After Installing Prague V1.05 ; I noticed that the jetways are missing ; I close the FSX and restart it may appear ; and if I make a flight from EDDM >> to LKPR the jetways again are missing ; hereof is some screen shots for this problem thanks Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted August 20, 2016 Aerosoft Share Posted August 20, 2016 Are you perhaps running low in VAS memory at that moment? Link to comment Share on other sites More sharing options...
gforce800 50 Posted August 20, 2016 Share Posted August 20, 2016 vor 8 Stunden , Hisham Selim sagte: After Installing Prague V1.05 ; I noticed that the jetways are missing ; I close the FSX and restart it may appear ; and if I make a flight from EDDM >> to LKPR the jetways again are missing ; hereof is some screen shots for this problem thanks Hi, i had the same problem, but i was able to solve it by changing the entry of Mega Airport Prague in simobjcets.cfg (located in C:\ProgramData\Microsoft\FSX). I changed a row, from this: "Path=Aerosoft\MegaAirportPrague\simobjects" , to this: "Path=Aerosoft\Mega Airport Prague\simobjects" (i added the gaps). I hope this helps.     Link to comment Share on other sites More sharing options...
chkl 34 Posted August 20, 2016 Share Posted August 20, 2016 With 1.05 and the latest Orbx Global/Vector/OpenLC updates, do we still need to remove the surrounding scenery files as documented in the first page? Link to comment Share on other sites More sharing options...
Swisspilot 235 Posted August 20, 2016 Share Posted August 20, 2016 The jetways in my case are also not moving i.e. with QW BAE and PT Tupolev. Permek enjoy your holidays but I realy hope you find a solution for this after your vacation. Why not add simply AES? Â Regards Patrick Link to comment Share on other sites More sharing options...
WebMaximus 320 Posted August 20, 2016 Share Posted August 20, 2016 AES doesn't work with P3D.  This certainly is an interesting scenery with an issue thread consisting of no less than 24 pages so far.  Maybe some kind of record  Good idea though to keep all issues in a single thread. Link to comment Share on other sites More sharing options...
Swisspilot 235 Posted August 21, 2016 Share Posted August 21, 2016 But at least for FSX. Link to comment Share on other sites More sharing options...
iFlyCZ 2 Posted August 21, 2016 Share Posted August 21, 2016 7 hours ago, Swisspilot said: But at least for FSX. well, AES doesn't work for FSX:SE also, so it would be usable only for someting about 1/3 of users, so it isn't an option. Link to comment Share on other sites More sharing options...
Swisspilot 235 Posted August 21, 2016 Share Posted August 21, 2016 vor 5 Stunden , iFlyCZ sagte: well, AES doesn't work for FSX:SE also, so it would be usable only for someting about 1/3 of users, so it isn't an option.  And how about SODE? Honestly for my it's also not a solution if it doesn't work with a lot of Aircraft. I tested it again with AS Airbus. It worked as expected. Then I switched to the QW Bae(which didn't work before). The jetways moved back but worked again by pressing ctrl j but went to a total wrong Position. Link to comment Share on other sites More sharing options...
chkl 34 Posted August 22, 2016 Share Posted August 22, 2016 6 hours ago, Swisspilot said:  And how about SODE? Honestly for my it's also not a solution if it doesn't work with a lot of Aircraft. I tested it again with AS Airbus. It worked as expected. Then I switched to the QW Bae(which didn't work before). The jetways moved back but worked again by pressing ctrl j but went to a total wrong Position. When the developer gets back I am sure he can fix the jetway problem with the BAE146. Link to comment Share on other sites More sharing options...
Fabo 41 Posted August 29, 2016 Share Posted August 29, 2016 On 5/15/2016 at 11:33 AM, Premek said: The problem is that we need to know dimensions of every model you guys use, but it is almost impossible to have all included from start. We have more than 2000 models included (AI add-ons too) but there is still many of them which we didn't covered.   Hi,  So if I understand right, the reason my new FSL AIrbus is UNKN TYPE is because it is not yet in APC database? Can I add it somehow? Link to comment Share on other sites More sharing options...
michalis 14 Posted August 29, 2016 Share Posted August 29, 2016 Hello , Just Installed Prague X Into my Prepared3DV3.35 and I get Some Weird Runway textures and No Markings , See Below :  Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image.  Any Idea what is going On ? I am running SODE 1.3.1 ! Thank you , Mike  Link to comment Share on other sites More sharing options...
WebMaximus 320 Posted August 29, 2016 Share Posted August 29, 2016 Someone correct me if I'm wrong but SODE has nothing to do with Prague. Â Instead you need to make sure APC is running and if you start P3D as admin make sure APC is configured to start as admin as well. Link to comment Share on other sites More sharing options...
data63 421 Posted August 29, 2016 Share Posted August 29, 2016 it looks as if the jetways are also missing so I guess APC is not running or missing some of it's objects  Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.