mindyerbeak 7 Posted April 20, 2016 Share Posted April 20, 2016 i just installed version 1.26 and I'm getting an error i never got before.. I created a route lszh-lsgg. PFPX gives an error for each these 3 waypoints : lszh-lsgg Altitude at ULMES,(BADEP and ROTOS) (19000ft) is below the minimum enroute altitude (20000ft). I tried editing them and hit apply but i still get a warning when I want to release the flight . How do i fix all this ? Thanks ! Link to comment Share on other sites More sharing options...
srcooke 422 Posted April 20, 2016 Share Posted April 20, 2016 Without a supplied route I guess UZ669 has been used with a computed FL of 190 ? Simply change that segment to Z669 or have PFPX select a route utilizing lower airways. Link to comment Share on other sites More sharing options...
mindyerbeak 7 Posted April 20, 2016 Author Share Posted April 20, 2016 I did select lower airways,no banana. Link to comment Share on other sites More sharing options...
srcooke 422 Posted April 20, 2016 Share Posted April 20, 2016 Cannot reproduce the issue here selecting lower airways. Only requirement was to apply the city-pair level cap for validation, initially planned at 190: -N0397F150 VEBIT T50 ROTOS Z669 ULMES Link to comment Share on other sites More sharing options...
mindyerbeak 7 Posted April 20, 2016 Author Share Posted April 20, 2016 this is mine> VEBI2N VEBIT T50 ROTOS Z669 ULMES ULME1R and I get those errors. Link to comment Share on other sites More sharing options...
srcooke 422 Posted April 20, 2016 Share Posted April 20, 2016 Using NG1604 indicates a min FL100 on the route, I cannot suggest where your Minimum Enroute Altitude is been generated from if the data is the same: Please login to display this image. Link to comment Share on other sites More sharing options...
mindyerbeak 7 Posted April 20, 2016 Author Share Posted April 20, 2016 Please login to display this image. Link to comment Share on other sites More sharing options...
srcooke 422 Posted April 21, 2016 Share Posted April 21, 2016 Did you check the route summary for the min airway altitudes? Link to comment Share on other sites More sharing options...
mindyerbeak 7 Posted April 21, 2016 Author Share Posted April 21, 2016 Yes.In your picture it shows min altitudes is 10000 in mine pfpx it says 20000 Link to comment Share on other sites More sharing options...
srcooke 422 Posted April 21, 2016 Share Posted April 21, 2016 If your entry for Z669 is indicating 20000' then it is an error with the AIRAC data. Which AIRAC do you have installed ? Link to comment Share on other sites More sharing options...
mindyerbeak 7 Posted April 21, 2016 Author Share Posted April 21, 2016 navigraph 1604 Link to comment Share on other sites More sharing options...
srcooke 422 Posted April 21, 2016 Share Posted April 21, 2016 Can you post a snapshot of the route summary. Link to comment Share on other sites More sharing options...
mindyerbeak 7 Posted April 21, 2016 Author Share Posted April 21, 2016 Sure. Please login to display this image. Link to comment Share on other sites More sharing options...
srcooke 422 Posted April 21, 2016 Share Posted April 21, 2016 That is not planned lower airway route you posted above " VEBIT T50 ROTOS Z669 ULMES " The summary indicates UZ669, hence the warning. Link to comment Share on other sites More sharing options...
mindyerbeak 7 Posted April 21, 2016 Author Share Posted April 21, 2016 I have redone everything and Im getting this. Please login to display this image. and the summary Please login to display this image. Link to comment Share on other sites More sharing options...
srcooke 422 Posted April 21, 2016 Share Posted April 21, 2016 Can you snapshot the ATC tab. Link to comment Share on other sites More sharing options...
mindyerbeak 7 Posted April 21, 2016 Author Share Posted April 21, 2016 Sure. Please login to display this image. Link to comment Share on other sites More sharing options...
srcooke 422 Posted April 21, 2016 Share Posted April 21, 2016 Sorry but with that snapshot the warnings tab is not in place indicating errors. Link to comment Share on other sites More sharing options...
mindyerbeak 7 Posted April 21, 2016 Author Share Posted April 21, 2016 is this what you need { You can see the 2 error warnings Please login to display this image. Link to comment Share on other sites More sharing options...
srcooke 422 Posted April 21, 2016 Share Posted April 21, 2016 I have tried on three different installations and cannot reproduce the problem at all. Maybe someone else can give insight. Link to comment Share on other sites More sharing options...
dave39 0 Posted April 21, 2016 Share Posted April 21, 2016 I got the same sort of warning on a flight, KEGE-KDEN that I haven't seen before; KDEN-KTFG: Altitude (8000 ft.) is below Grid MORA (12100ft.) KFTG was alternate airport on this flight and FP to alternate was auto-selected with "find". I wouldn't have thought the auto-find would create a route that wouldn't work??? Or is this normal and up to pilot to note warning and adjust;ie different alternate, edit course? I am also on navigraph airac 1604 Regards, Dave Link to comment Share on other sites More sharing options...
srcooke 422 Posted April 22, 2016 Share Posted April 22, 2016 That is a different issue to the OP's post Dave, Grid MORA data was actually introduced in v1.23 and what your seeing is a warning that your altitude at that point is below the Minimum Off Route Altitude, if you remain on the planned route there shouldn't be an issue. Link to comment Share on other sites More sharing options...
dave39 0 Posted April 22, 2016 Share Posted April 22, 2016 Great, thanks! Learned something new already today and it's only 7AM! dave Link to comment Share on other sites More sharing options...
dawgfan58 26 Posted April 25, 2016 Share Posted April 25, 2016 I'm also having this issue. Flight is Zurich to Montreal in the 77W. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
srcooke 422 Posted April 25, 2016 Share Posted April 25, 2016 1 hour ago, dawgfan58 said: I'm also having this issue. Flight is Zurich to Montreal in the 77W. For some reason your not getting the climb at LASUN which I get here and hence your below the available airway flight-level: ATC ROUTE: N0419F180 VEBI3W VEBIT T51 LASUN/N0476F360 UN176 LUMEL UT10 RLP UL613 ROTSI UM164 BRY UM729 AMODO/N0478F380 UM729 RESMI UN491 LGL UN502 JSY UN160 NAKID UN84 LULOX/M084F380 DCT LIMRI NATF 53N020W/M083F390 NATF 54N040W/M083F400 NATF RIKAL N440A YRI/N0487F400 J563 YSC V300 YJN V487 YUL DCT Possibly V40 holding you down? EDIT: V40 is the reason with max FL195 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.