Jump to content

Svolvaer lack of airport


Krupsion

Recommended Posts

  • Replies 74
  • Created
  • Last Reply
10 minutes ago, Krupsion said:

Hi,

I've bought my copy in simmarket shop. I did as You said. I've redownload new (may be new ?) and after installation ... nothing changed !

Cheers

Personally I only buy from simMarket as a last resort if I can't get the product I want any other way. Usually in my experience the best thing is to always buy a product from as close to its source as possible in order to receive quick updates etc.

Link to comment
Share on other sites

I have downloaded from Aerosoft site minutes ago and have the runway, but the a/c is 31ft above the ground. If I slew to the side of the afcad, the a/c touches the ground at 17ft.

I have that scenery at top priority. Disabled FTX NOR ENSH afx and cvx but still 31ft above the ground.

Pierre

Link to comment
Share on other sites

All is fine in FSX. Problem lies in P3DV3.

It must be a security thing. When I loaded FSX, I was asked to confirm the new Sode module, confirmed and all is ok. But P3Dv3 is different.

Here is the result of my log file:

[11:26:48.503] DEBUG  : Trying to read Settings from SimObjectsDisplayEngine.ini file...
[11:26:48.503] DEBUG SODE.SETTINGS : All Settings successfully read.
[11:26:48.503] DEBUG SODE.SETTINGS : CurrentSettings -> WatchDog=1; UserJetwaySound=1; SecMenuHotKey=SHIFT+VK_MINUS; AIDetection=1; AIJetwaySound=1
[11:26:48.503] DEBUG  : Trying to find Custom Configuration files...
[11:26:48.503] DEBUG SODE.XML : Finding SDX CFG Files...
[11:26:48.503] WARN SODE.XML : \cfg\ not found. Code(3) [N:\Prepar3d v3\SODE\cfg\*.sdx]
[11:26:48.503] DEBUG  : Trying to build SimObject List out of Custom Config files...
[11:26:48.503] WARN SODE.XML : No SDX Files found! Lists are empty.
[11:26:48.503] DEBUG  : Trying to find XML Definition files...
[11:26:48.503] DEBUG SODE.XML : Finding XML Files...
[11:26:48.503] INFO SODE.XML : xml File Found: ENSH_SODE.xml!
[11:26:48.503] DEBUG  : Trying to build SimObject List out of XML definition files...
[11:26:48.503] DEBUG SODE.XML : Building List from File 'N:\Prepar3d v3\SODE\xml\ENSH_SODE.xml'
[11:26:48.503] DEBUG SODE.XML : XML Data successfully read and List created.
[11:26:48.503] DEBUG  : Trying to generate Aircraft Parameter Map from the INI file...
[11:26:48.503] WARN SODE.ACFTPARAMS : Could not extract from AircraftParameters.ini or file not found!
[11:26:48.503] DEBUG  : SDX/XML/INI Handling done! Start FS Processing...
[11:26:48.503] DEBUG SODE.FSPROCESS : Trying to connect to FS...
[11:26:48.940] FATAL SODE.FSPROCESS : Not able to connect to FS! Shuting down...
[11:26:48.940] DEBUG  : Terminate SODE.

That should be more useful than a picture. Let me know, I'll upload one if necessary

Pierre

Link to comment
Share on other sites

Here is the log file generated after "SimobjectDisplayEngine.exe" is started and P3DV3 is also started.

[11:52:56.368] DEBUG  : Trying to read Settings from SimObjectsDisplayEngine.ini file...
[11:52:56.368] DEBUG SODE.SETTINGS : All Settings successfully read.
[11:52:56.368] DEBUG SODE.SETTINGS : CurrentSettings -> WatchDog=1; UserJetwaySound=1; SecMenuHotKey=SHIFT+VK_MINUS; AIDetection=1; AIJetwaySound=1
[11:52:56.368] DEBUG  : Trying to find Custom Configuration files...
[11:52:56.368] DEBUG SODE.XML : Finding SDX CFG Files...
[11:52:56.368] WARN SODE.XML : \cfg\ not found. Code(3) [N:\Prepar3d v3\SODE\cfg\*.sdx]
[11:52:56.368] DEBUG  : Trying to build SimObject List out of Custom Config files...
[11:52:56.368] WARN SODE.XML : No SDX Files found! Lists are empty.
[11:52:56.368] DEBUG  : Trying to find XML Definition files...
[11:52:56.368] DEBUG SODE.XML : Finding XML Files...
[11:52:56.368] INFO SODE.XML : xml File Found: ENSH_SODE.xml!
[11:52:56.368] DEBUG  : Trying to build SimObject List out of XML definition files...
[11:52:56.368] DEBUG SODE.XML : Building List from File 'N:\Prepar3d v3\SODE\xml\ENSH_SODE.xml'
[11:52:56.376] DEBUG SODE.XML : XML Data successfully read and List created.
[11:52:56.377] DEBUG  : Trying to generate Aircraft Parameter Map from the INI file...
[11:52:56.377] WARN SODE.ACFTPARAMS : Could not extract from AircraftParameters.ini or file not found!
[11:52:56.377] DEBUG  : SDX/XML/INI Handling done! Start FS Processing...
[11:52:56.377] DEBUG SODE.FSPROCESS : Trying to connect to FS...
[11:52:56.378] DEBUG SODE.FSPROCESS : Connected to FS!
[11:52:56.379] DEBUG SODE.FSPROCESS : Secondary Text-Menu Hotkey set -> SHIFT+VK_MINUS
[11:52:56.379] DEBUG SODE.FSPROCESS : Setting up Connection Watchdog...
[11:52:56.379] DEBUG SODE.FSPROCESS : Entering FS Dispatch Loop.
[11:52:56.382] INFO SODE.FSLOOP : SODE connected to Simulator...
[11:52:56.382] DEBUG SODE.FSLOOP : Initialize Position after SimState query!
[11:52:56.383] INFO SODE.FSLOOP : Successfull Registration of Reserved Key -> a Tab+A
[11:52:56.383] INFO SODE.FSLOOP : SeasonalObjectHandler: Variables initialized!
[11:52:56.684] INFO SODE.FSLOOP : ### FILTERING OBJECTS WITHIN SIM RADIUS OF 24000m
[11:52:56.689] INFO SODE.FSLOOP : ### Active SimObjects: 22; Active Wind Data Probes: 1
[11:52:56.699] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:ENSH [Environmental Data Probe]. ID: 161
[11:52:56.700] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:WindMast_Direction [ENSH_WindMast_Direction]. ID: 162
[11:52:56.700] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:Windsock_Pole_02 [ENSH_Windsock_Pole]. ID: 163
[11:52:56.700] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:Windsock_Pole_01 [ENSH_Windsock_Pole]. ID: 164
[11:52:56.700] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:UnitA [ENSH_PLASI_Red_Pulsating]. ID: 165
[11:52:56.701] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:UnitB [ENSH_PLASI_Red]. ID: 166
[11:52:56.701] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:UnitC [ENSH_PLASI_White]. ID: 167
[11:52:56.701] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:UnitD [ENSH_PLASI_White_Pulsating]. ID: 168
[11:52:56.701] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:UnitA [ENSH_PLASI_Red_Pulsating]. ID: 169
[11:52:56.702] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:UnitB [ENSH_PLASI_Red]. ID: 170
[11:52:56.702] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:UnitC [ENSH_PLASI_White]. ID: 171
[11:52:56.702] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:UnitD [ENSH_PLASI_White_Pulsating]. ID: 172
[11:52:57.698] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:ENSH_Terrain_WI [ENSH_Terrain_wi]. ID: 173
[11:52:57.699] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:Windsock_01 [ENSH_Windsock_Light]. ID: 174
[11:52:57.699] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:Windsock_02 [ENSH_Windsock_Light]. ID: 175
[11:52:57.699] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:Flags_01 [ENSH_Flags_01_Slow]. ID: 176
[11:52:57.700] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:Flags_02 [ENSH_Flags_02_Slow]. ID: 177
[11:52:57.700] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:WindMast_Pole [ENSH_WindMast_Slow]. ID: 178
[11:52:57.700] INFO SODE.FSLOOP :  + SimObject ENSH_SODE:Flags_03 [ENSH_Flags_03_Still]. ID: 179
[11:52:59.701] DEBUG SODE.FSLOOP : [AI DETECTION] N monitored AIObjects = 0
[11:53:03.700] DEBUG SODE.FSLOOP : [AI DETECTION] N monitored AIObjects = 0
[11:53:07.701] DEBUG SODE.FSLOOP : [AI DETECTION] N monitored AIObjects = 0
[11:53:11.700] DEBUG SODE.FSLOOP : [AI DETECTION] N monitored AIObjects = 0
[11:53:15.700] DEBUG SODE.FSLOOP : [AI DETECTION] N monitored AIObjects = 0


Pierre

Link to comment
Share on other sites

Same problem here P3dV3
hanging in Air just above ground

 

Please login to display this image.

here its ok  just a few meters aft ....

Please login to display this image.

 

 

Link to comment
Share on other sites

  • Deputy Sheriffs

Pierre,

to be honest, I have no clue what's wrong on your side. On my P3Dv3 it works perfectly and my log looks like yours...

A dev will have to take a look on it.

Link to comment
Share on other sites

Check your scenery\world catalog and see if you have this file -> ensh_apx_ALT.bgl


Just rename it (ensh_apx_ALT.bgl.org) and you should be fine....I have P3D v3....you may need to restart P3D...

 

 

Best regards,


Arild N.

Link to comment
Share on other sites

And what about static aircraft in this scenery that was mentioned above, are you able to disable that feature?

I'm thinking of buying this scenery but since I'm doing all my flying online I prefer to never have any static aircraft that can clash with online traffic.

Link to comment
Share on other sites

3 minutes ago, Mrd607 said:

No , haven't figured out how to remove the static aircraft yet.

OK, thanks for the info.

Not a 100% showstopper but would have been nice if you could choose if you want static aircraft or not. I personally think that option should always be there when static aircraft are included with a product/scenery.

Think I'll hold off a bit with this one, at least until Aerosoft had the time to fully address the issue some of you guys discovered and it has been confirmed all is good.

Link to comment
Share on other sites

5 minutes ago, Mrd607 said:

Reinstalled and now look good,  ensh_apx_ALT.bgl.in world scenery did the trick.. Thanks to Arild..

That's great news and I guess this means the installer will be having a second update to include this fix so all files end up where they need to be without any manual intervention?

Link to comment
Share on other sites

  • Developer

"ensh_apx_ALT.bgl" has nothing to do with this scenery, so I assume this is a file from a different add-on also covering Svolvær. Some add-ons like mytraffic and FTX includes there own AFCADS, these has to be removed or else the scenery will not display properly.

Link to comment
Share on other sites

4 minutes ago, Jo Erlend said:

"ensh_apx_ALT.bgl" has nothing to do with this scenery, so I assume this is a file from a different add-on also covering Svolvær. Some add-ons like mytraffic and FTX includes there own AFCADS, these has to be removed or else the scenery will not display properly.

OK, good to know.

4 minutes ago, Nac301 said:

More fun with this scenery
Started GSX and the hole scenery dissapare ...someting is wierd with it:blink:

Lucky me I'm not using GSX anymore ;)

Link to comment
Share on other sites

11 minutes ago, Jo Erlend said:

"ensh_apx_ALT.bgl" has nothing to do with this scenery, so I assume this is a file from a different add-on also covering Svolvær. Some add-ons like mytraffic and FTX includes there own AFCADS, these has to be removed or else the scenery will not display properly.

Correct, I believe is from the AoN scenery package.  Try to land with the MJC Q400, ended up in the ocean.. ;-)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy & Terms of Use