Misha_K
-
Posts
94 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Misha_K
-
-
Hello Misha,
Is there any settings in the German landmarks configuration utility.
Nope.
-
Hi people,
Sorry for the question about somewhat antiquated scenery... I'm sure this was mentioned before, but I can't find the thread for the life of me. I have German Landmarks and GAP EDDS installed in FS9. There is a duplicate TV tower on the hill south of the airport and duplicate smokestacks to the east. I would like to deactivate the objects from the GAP scenery. Which file controls this? Thanks in advance.
Misha
-
Redownload the KORD installer as it has been updated for AES 1.96!
As it has nothing to do with reinstalling AES.
If you had read what I had written, you would have noticed that I said that my KORD installation had already been updated. I just re-ran the KORD update to fix my problem.
mine doesnt get solved at all even with the updates .....whenever i update my kord to newer version my FS9 crashes ...so i think it would be good if any older versions of AES supported this airport without the updates it would be great....since i dont wanna risk each and every other AES workin scenery in my FS9....!You quite possibly have a duplicate AFCAD for KORD installed somewhere.
-
Solved the problem myself. On a hunch, I re-installed the KORD update. Now everything is fine. Not sure what made AES think that I hadn't updated the scenery, since I already had, but hey. It works now.
-
New Problem. On final approach to KORD I get the message "Scenery Protection Active. AES Deactivated!" I tried reinstalling the latest version of AES to no avail. KORD is active in the scenery library and shows up as registered under the Addon Manager menu. It also shows as active in the AES airport activation window. Thanks in advance.
Misha
-
Worked. Thanks.
-
Hi guys,
I had to reinstall CYYZ. Now I have double gates, static and AES. What do I do? Run the AES installer again? Thanks in advance.
Misha
-
Welp, FSDT KORD has flat areas where the bridges are in real life. The bridges at KORD are no where near as large and lond as at EDDP mind you.
But getting to my point, it looks nothing like "real life" does, in real life the bridges are very pronounced. I would like to add the FSDT version of KORD is an awesome airport in FS even with this limit. They did what they had to with the limits of the simulator.
That's a completely different situation. The taxiway bridges at KORD in real life are completely level with the neighboring taxiways and aprons. There is no slope involved. The highway and the people mover make a dip to go under the taxiway bridge and then go back up to terminal level. I know because I got ticketed for speeding when my car briefly accelerated well above the speed limit wihile going through that dip under the taxiway bridges at KORD! Beware of the traffic cops at KORD. They are very bored and in a very foul mood.
-
Hello Misha,
Just to confirm, you need to use the e-mail address at the time of purchase.
Shaun, I've tried that, too. It's not working. It's not accepting any of them.
-
FYI, just downloaded the 3.02 patch from SimMarket (full installer actually), worked just fine.
That's precisely the installer that isn't working for me.
-
Hi there,
I just discovered that the current version of EDDV is 3.02 and that I still have 3.0 installed. I went to Simmarket (where I purchased the scenery) and downloaded the new installer. But when I run it, it refuses to accept the install code. Granted, I have changed emails associated with my simmarket acount since I purchased this scenery, but it accepts none of my old or current emails as vallid. What can I do? Thanks in advance.
Misha
-
Moin moin,
hä ??
ich habe doch gar kein UT Europe installiert!!
Hat auch keiner was Gegenteiliges behauptet.
-
@Misha
Von löschen hat nie einer was geschrieben.
Umbenennen hat denselben Effekt. Die Tree-Lib Dateien haben mit den Autos im Wald garantiert nichts zu tun. Mit dem Umbenennen handelst du dir nur Probleme bei anderen Szenerien ein. Die Autos im Wald liegen an irgendeinem Konflikt mit einer Landclass Datei. Dass muss nicht UT Europe sein. Es kann auch sonstwo irgendeine Gewrmany Landclass von einem anderen Addon, Freeware oder Payware, installiert worden sein.
-
Danke. Dann warte ich mal auf 'nen Patch und ignoriere den Verkehr in der Zwischenzeit. Fliege sowieso meistens die 25 an.
-
Die werden die Probleme wohl verursachen.
benenn die beiden BGL's einfach mal in BGX um und schau, ob du das Problem dann immer noch hast.
Scheint so, als wenn irgendein anderes Addon die Bäume mit installiert hat oder du mal andere Bäume installiert hast.
Wie gesagt, änder die beiden Dateien von *.BGL nach *.BGX um.
Bloss nicht! Das sind Szenerieobjekt-Bibliothek, auf die verschiedene, manchmal mehrere Szenerien zugreifen, um bspw. bei diversen Addon-Flughäfen Bäume darzustellen, die aber selber nicht Bäume an bestimnten Orten platzieren. (GGv3_XTrees_lib9_0.BGL sind z.B. die Bäume von Gerrish Gray.) Das hat mit den Bäumen bei FRA nichts zu tun. Wenn du die löschst, bzw. umbenennst, hast du bei anderen Flugplätzen Fehlermeldungen. Die Autos im Wald werden mit einem Landclass-Konflikt zu tun haben, wie das mit UT Europe der Fall sein kann.
-
Tell me you're kidding!
No! Check it out yourself: "Vorsicht bei der Einfahrt des Zuges!" The announcer even has a regionally typical Saxon accent.
-
Moin,
Ich habe nun endlich den Upgrade von MAF2005 zu MAF2008 gemacht. Sieht wie immer Klasse aus. Nur ein kleines Kompatibilitätsproblem: bei Verwendung von UT Europe ist der AES lite Verkehr auf der A3 und A67 westlich des Flughafens im Wald. Da deckt sich UTE nicht mit der von MAF2008 dort erwarteten Strassenführung. Lässt sich das irgendwie beheben? Vielen Dank im voraus.
Misha
-
Gerhard,
Vielen Dank für die Elevation Patches für EDDP und EBBR. Da du, wie ich, das Mesh von Yohann Baptiste nutzt, hast du wahrscheinlich auch bei MAF2008 Klippen im Main norwestlich des Flughafens. Bei deinem Talent wird es dir sicherlich nicht schwerfallen, dafür auch einen Patch zu erstellen, oder?
Gruss
Misha
-
After landing, I walked to the train station with Walk&Follow and to my surprise heard announcements on the platforms!
Can we have an update for MAF2008 to add trains?
-
Yes, I was surprised that the installer checks for SG4 and German Football Staduims but then ignores them and installs double scenery anyway. BTW, you can also rename the following files, as they are duplicative of SG4:
eddf_fs9_commerzbank.bgl
eddf_fs9_commerzbank_exc.bgl
eddf_fs9_messeturm.bgl
eddf_fs9_messeturm_exc.bgl
Once the city bgl file has been deactivated eddf_fs9_city_LIB.bgl should be unnecessary as well.
A few other compatibility issues:
- The traffic to the A3 and A67 to the west of the airport runs through the woods when using SG4.
- The flatten for the airport is very generousy proportioned and creates two big steps on the Main river to the northwest of the airport.
-
Absolut!
-
ABS Intel DuoCore 6600 2.4Ghz 2GB RAM, Nvidia GeForce 7950GT, Windows XP SP2
-
Yep. Mit deaktiviertem AES habe ich das Problem nicht.
-
Moin,
Seit 1.92 macht der Puter bei AES Flughäfen mal immer wieder nach ein paar Minuten ein spontanes Reboot ganz von alleine. 1.93 scheint auch nicht geholfen zu haben. Hilfe bitte! Vielen Dank im voraus.
Misha
FS9 Question: German Landmarks + GAP EDDS Duplicate Objects
in Aerosoft Scenery
Posted
You mean higher than GAP 1 Vol 2 rather than MAF. Thank you!