Jump to content

Terblanche

Members
  • Posts

    169
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Terblanche

  1. Never mind ... I've figured it out. The rudder setting in FSUIPC for the CRJ should be Axis Rudder Set and not just Rudder Set. Everything is working now. Can't believe it took me a week to solve the problem and one post on the forum made me think of something els. Anyway - it works now. Looking forward to the next update.
  2. My rudder is mapped through FSUIPC. Steering on the ground works 100% with the rudder ... ... but when using the rudder the pedals in the air the pedals do not even move in VC making cross wind landings impossible. I've checked and rechecked everything including following the checklist to a T ... and seeing that rudder is working with ALL other aircraft, it could not be a hardware or setup problem. Am I missing something, somewhere, somehow? Any suggestions, advice, or tips?
  3. Hartstikke bedankt Mathijs ... will check in their version.cfg file but at least I now know that we are on the latest release.
  4. I've just updated the CRJ via Marketplace inside MSFS but the version they show is 0.1.3 Where do we download 1.0.0.1 from ...? Regards Terblanche PS: The CRJ is such a wonderful aircraft to fly in MSFS and the FPS/smoothness is so much better than any default aircraft from Asobo.
  5. My mistake ... when I uninstalled I didn't make sure that everything from and about EDDF in SODE are also deleted before new install. Now, everything is back to normal. I have no idea what, why, how, or from where gates started to hover in the air ...
  6. For some unknown reason one of the two jetways of GATE 21 is in the air ... ... the weirdest part is that it only happens when I arrive at EDDF. When I start the sim with EDDF then it is as it should be. Using EDDF SODE and GSX only for pushback procedures It's for P3D4.5 (HF3) I've already uninstalled and reinstalled the latest version again. Any help or ideas why this will happen?
  7. That's correct sir. FPS are always a stable 30 (with Vsync capped on 4K monitor) and my performance with P3D4.5HF3 is very good and never a problem.
  8. There are these awkward silences between PF and PnF respond time ... resulting in a checklist that takes double the time to complete. Any reason for it or is it a setting that I've missed?
  9. Yip, that fixed it for me too ... Maybe Aerosoft will fix it for future updates that it does not depend on changing stuff in Nvidia Control Panel.
  10. The only thing in my NI is the "Prefer Maximum Performance" tab ... there is no SGSS or 4xSS ... and no range arcs for me.
  11. Do you use any PTA or Tomato preset ...? And if you do, what preset do you use? Your cockpit is so much brighter than any of the presets I've downloaded or made myself. # also no range rings on my installation and the joystick is sooooo sensitive that you ride this bus like a roller coaster down to the runway .... seeeee-saw seeeeeee-sawe seeeeeeee-saw
  12. My version: Prepar3D_v4_Professional_4.5.13.32097 Client + Content ... everything else works effortlessly effortless.
  13. I feel a little lost ... because I'm doing everything from the 'book' and still the same anomaly in my flights. I've just done another flight: LOWS/33 INROM1S INROM DCT RDG DCT RONIG DCT TABAT DCT UPDAT DCT DLE DCT NIE Z88 VERED VERED3P EDDW/27 ... and I've done it step by step; to the comma and point of every item from the checklists and when it had to turn right on the Z88 airway to VERED just after NIE (VOR) it started to turn left although NAV was still engaged and it kept on turning left and just refused to intercept or stay on route. I then let it be to see where it wanted to go but it just kept on turning left ... and then the nose dropped and that was it: GAME OVER - insert coin. 😞
  14. I forgot to say ... when I realised it's not going to turn for LONLI I then engaged HDG and turned the heading bug to the right. It also did not respond to that. I disengaged the AP and engaged it again but still it did not want to turn. I then disengaged the AP again, turned right manually and engaged the AP and then HDG which then seemed to activate.
  15. Thank you Hans ... here is this specific flight: EDDC/22 ABKIS3W ABKIS Z715 KULOK L984 BOMBI Z75 NOKDI Z104 SIPVU SIPVU2R EDFH/21 All went well until after KULOK when it just continued straight on and didn't turn for LONLI
  16. See attached picture ... The autopilot will follow the NAV (FMS1) and then somewhere it just decides, "de hell with it, I'm doing something else ..." There is no obvious reason, and nothing changed while flying along, and it happens randomly. Obviously I'm doing something, somehow wrong because I've had exactly the same problem with the pre-PRO version. Please help, because I want to tame this aircraft.
  17. I've uninstalled and reinstalled ... without RAAS Still didn't work. Then discover that the RAAS inscription was still in the dll.xml probably inserted by PMDG which by the way works with their B777 and B744/8 Now the A318/19/20/21 works but unfortunately the RAAS was now also killed for the Boeing family.
  18. I've tried that already but will do it again. Maybe do a complete reinstall of the Airbus A318/19/20/21 and then update to 1.2.5.2 before launching P3D and see if it works.
  19. Does that mean it's on its way ... ? or can I change something, somewhere to be able to fly A320s in P3D4.5.1 ...?
  20. @mopperle ASUpdater says: Installed version: 1.2.5.2 No updates available for this product! [Experimental Updates is selected] Latest update via SimMarket is 1.2.5.0
  21. I've only updated to p3d4.5.1 now because of a handful of reasons. Everything works 100% except when I load any aerosoft airbus (A318/19/20/21) then the sim quits with a ntdll.dll crash in the event log. I've uninstalled the P3DV4_V1250 version and reinstalled and restarted computer but still the same issue. Every other aircraft loads without hazzle. Windows is updated. Nvidia drivers are updated. Aerosoft is updated. Any suggestion and/or recommendation how to fix it ...? Hartstikke dank.
  22. I've asked them and NO reply ... and their forum points to Aerosoft's forum 😞
  23. Where do you switch the Dynamic Lights ON/OFF for the FSDG Bremen scenery ...? There is NO option in the FSDG Scenery Configurator.
  24. THIRD BLACKOUT in last three flights i7 7700 @4.2 with 32GB DDR4 RAM on Win10x64 with 1080Ti Airbus A318/19/20/21 Pro version 1.2.4.0 P3D4.4 with all the necessary addons (GSX, FSUIPC, SODE, ASP4, etc etc) UTL for AI Traffic (NO VATSIM) Lots and lots of scenery Nothing out of the ordinary regarding loading the plane and pretty much the same since Aerosoft's Airbuses for FSX and there is no reason at all for the complete blackout. I've uninstalled, restart computer, reinstalled, restart computer before today's flight - same issue, same result. It seems 5 months later since this thread was started that it's still a mystery. EDITED: This issue only started for me after latest update from Aerosoft. Before that, many many flights without issue.
×
×
  • Create New...