Jump to content

GEK_the_Reaper

CRJ Forum Moderator
  • Posts

    691
  • Joined

  • Last visited

Posts posted by GEK_the_Reaper

  1. @Richard Dastardly I don't realy understand what you are trying to tell me...

    I argued with the OP because he put other DEV in comparison forgetting to sum up their price tags.

    As you said here: 

    vor 9 Stunden schrieb Richard Dastardly:

    PMDG offer you a plane, and then they're going to offer you a slightly different length plane for the same price again, and so on.

    was exactly what I tried to explain in my post because the OP compared 4 CRJ variants to ONE PMDG variant so I added 65 (for the 700) + the price for the 800 + the price for the 900 + ... (because we don't exactly know the price tags on those). So you will definately end up paying more then 70€ for 4 variants.

    Also the 146 comes in 3 (not 4 variants) and has the same price tag as the CRJ.

    ...

    So I think you missunderstood the point I was trying to make.

    • Upvote 1
  2. Am 25.5.2022 um 14:05 schrieb Martín Agua:

    Let's review the current 3rd party airliner market for MSFS; PMDG has their DC-6 for 55€ and their 737NG for 65€, Just Flight has their 146 for 60€, Leonardo has their MD-80 for 90€ and Fenix has their A320 for 59€. All of them offer a service and product that is light years above what Aerosoft offers for their CRJ, forcing you to buy the 550/700 for 50€ in order to have access to buy the more popular 900/1000 for another 20€. An armed robbery if you ask me.

    Well not quite...so let me share my 2ct:

    PMDG 737-700 has a promo launch price of 65€ (+800 variant +900 variant + ... variant),

    all others offer you 1 ACFT roughly at 70€.

     

    With the CRJ you get 4 variants for 70€....so let's be fair in comparison.

    • Like 1
    • Upvote 3
  3. Am 3.4.2022 um 02:23 schrieb guy739:

    Hello,

     

    I tried searching this but couldn't find anything. During climb out with the autopilot engaged(Speed and Nav mode, with proper altitude set) I get a smooth climb until upwards of FL180-FL220ish. At that point I more often then not I get a rapid nose up pitch in upwards of 4k feet per minute. I'll disengage the autopilot and get the aircraft stabilized. But it then takes a while for the speed mode to work again after being engaged at which point in continues to climb normally. Any thoughts?

    Such behaviour has not been reported yet. Would be great to see a video of this issue.

  4. vor 1 Stunde schrieb Vicinian:

    Honestly lol.

    Honestly....you should try to read the entire reply before you LOL.

     

    Understand that all those over 100 community users provide bits and pieces and upload those every step of the way (in the DEV or EXP versions ONLY). Can you tell how many BUGS have been uploaded then unloaded then uploaded again etc? Did you notice that some of the uploaded versions didn't even work at all due to instant CTD? Have you tried a DIR TO in that NX, did you notice both MCDUS providing same informations? etc.

     

    Now don't get me wrong...those guys are doing a tremendous job for free (did you help them with a small donation already?) but comparing it (at this stage) with the CRJ...this makes me LOL.

     

    Now please get back on topic or this will be closed 

     

     

    • Upvote 2
  5. @sidfadc this is definately not normal.

    I 've read you have checked few things already so just for sannity:

    - create new empty profiles for your controllers (that is the only way to be sure no keybindings are there) --> if you checked then skip

    - empty community folder to check for interference with addons (like some pushback or other stuff) -> skip if already done

    - check another standard scenery (it could be that a 3rd party scenery has some issues with material of the taxi ways) -> skip if done

     

    I can't come up with other ideas but crazy ones e.g. check some of the options in MSFS like icing.....

    • Upvote 1
  6. vor 6 Stunden schrieb Tbo:

    Free projects (A32NX) gets more update than paid one... Always wondered why.

    And also because they are working on adding and fixing issues as they go. So instead of saying...here you go with the full set of features, they add features bit by bit ;) . (They only currently added VNAV as an example of that....).

    And it is also because (as the loading text says) over hunderd of community members actually provide code for it.

    • Upvote 3
  7. @thepilote78 how did you load the CRJ?

    I remeber seeing this reported a few times but I don't think we've been able to reproduce it. IIRC it had to do with aircraft switching from developer menu or something like that or starting from a saved scenario or in a wrong state etc.

    I never encountered this issue on my end!

     

    Does this happen consistently on your end?

    What startup state did you saved in the EFB?

  8. Am 18.3.2022 um 15:42 schrieb Joe Markowski:

    So is there really no way to fix this internal to the CRJ?

    I will answer you (since you quoted me) but I'm unsure what to tell you. I'm not affiliated with AS in any way so this is purely my gues.

     

    AS offer a wide range of products and I think they focus to fix major issues as they arrise. Since MSFS is a "work in progress" most updates come with improvements but also issues. If AS will always hunt issues introduced with the sim, implement a workaround, wait till the workaround no longer works due to a fix from ASOBOs, then remove the workaround (or implement other workarounds for new issues)....they won't be able to do anything else ;) .

     

    Now since:

    - we identified that this AC behaviour is sim related

    AND

    - since it can be overcome if you understand what happens (I even posted videos of perfectly smooth flights)-

     

    I suppose it is not top priority to generate a fix for it (PLEASE UNDERSTAND THIS IS PURELY MY GUESS).

    I know other issues that are beeing worked on (not SIM related but CRJ related).

    • Like 1
  9. vor 1 Stunde schrieb StanTGM:

    …my VR setup works pretty well.

    Well @StanTGM here you go. I took my time to record another video just for this matter (I have no idea how to capture only 1 of the 2 screens so the video is a bit small to perfectly recognize what is pressed...but sound is there).

    PLEASE NOTICE that the very FIRST time I tried to press the MCP SPD button I accidentaly right clicked so the zoom in function activated.

    https://youtu.be/mrYVGCEi1g4

     

    @RemcoNL please check the video out and tell me if you see any of the things you mentioned.

  10. vor 4 Stunden schrieb StanTGM:

    Sorry to disagree, pls. check your facts: the infamous „hover-the-pointer-wait-move-pointer-again-wait-hover-again-over-knob“ solution (?) can take 30 seconds or longer. Sometimes it indeed works relatively fast, but most of the time it does not.

    You must be doing something wrong or your VR setup has some issues as what the OP describes like loosing focus etc.

    I shared already videos showing that it works prety well....I agree with you (and all those reporting it) that it's a PIA. I'm also bringig the issue up to the DEV from time to time and there is hope that ASOBO will eventualy fix it.

  11. vor 4 Stunden schrieb StanTGM:

    A bitter taste remains, though - each time I try to press the Baro button…

    You have to do this 2 times a flight and the upper workaround will consume 6sec / flight......just saying.

     

    It is hard for customers to understand what is related to AS and what ios related to the SIM...e.g. the right left click that came WITH THE SIM after SU5. And yes...while it works in 2D, it does not work in VR AND it has been reproduced by ASOBO quite a while now. As you read prior sentence you will understand that this is not realy a AS issue so please be so kind and report it to ASOBO. We have already done it but....

    • Thanks 2
  12. @RemcoNL please serach the forum for something called "Please don't send us lists" ;) .

    Am 6.3.2022 um 23:02 schrieb RemcoNL:

    Unable to click buttons in scrollknobs (i.e. Hdg synch, altitude, IAS/mach, standard QNH, etc) (biggest issue)

    A plethora of topics for this one: FIX -> let the mouse CRS dissapear when positioned over the pushbutton, wake it by a slight movement and as soon as it is visible just left click and the button will be pushed (search for topics and you will find answers).

     

    Am 6.3.2022 um 23:02 schrieb RemcoNL:

    unable to hit fms CLR button without moving the airbrake 

    Not having this one because if I want to hit CLR, I will move my head in such a way that "my virtual hand...and finger" are clear of any conflicts. Just rotating your head is not sufficient because the 3D lever will block CLR button.

     

    Am 6.3.2022 um 23:02 schrieb RemcoNL:

    Top FMS buttons are hard to click, cursus seems to come forward/up

    Not having this one.

     

    Am 6.3.2022 um 23:02 schrieb RemcoNL:

    Mouse loses 'focus' sometimes (hover over a button, but it acts like there is nothing there)

    Not having this one (using Quest 2)

     

    Am 6.3.2022 um 23:02 schrieb RemcoNL:

    Top part of roof panel is hard to reach 

    Nor this one.

     

    Am 6.3.2022 um 23:02 schrieb RemcoNL:

    Unable to manipulate cabin pressure and actually see what i am doing

    I actualy can do it because I position the CRS on the rotating knob and contionue rotating it even if I loose focus.

    • Thanks 1
    • Upvote 1
    • Downvote 1
×
×
  • Create New...