-
Posts
7361 -
Joined
-
Last visited
-
Days Won
17
Content Type
Profiles
Forums
Downloads
Posts posted by Heinz Flichtbeil
-
-
Ja, das ist richtig, was FlyAgi schreibt...
Ich schließe diesen Thread dann auch einmal ab....
Gruß heinz
-
hallo bernd,
ja, das war soweit ich weiß ein Freeware Airport Addon. Ist das richtig?
Der ist dann im AO nicht enthalten.
Aber möglicherweise bei den Updates für DVD's (sicher bin ich mir da aber nicht, da es eben ein Freeware Addon war):
Gruß Heinz
-
Hallo,
soweit ich weiß kann man die Veränderungs-Geschwindigkeiten auch einstellen.
Im Wetter Menü von X-Plane 12.
- Veränderung über Ort und Zeit
Aber ich habe damit auch noch nicht allzuviel experimentiert wenn Reales Wetter eingestellt ist ...
Gruß heinz
-
Ja, das stimmt. Das ist manchmal erforderlich, das beim ersten Mal die Szenerie noch einmal geladen werden muss.
Soweit ich weiß wird dann erst eine benötigte Datei geschrieben...
Gruß heinz
-
Hallo Horst,
hier haben sie funtioniert. Auch die Marshaller....
SAM3 (v3.1.10) Plugin installiert? Wäre wichtig.
Und Flugzeug Beacon Lights aus?
Gruß Heinz
-
Hello,
our Airport Dortmund is also available for X-Plane 12.
Customers who have purchased the version for X-Plane 11 can now also install Dortmund for X-Plane 12 via Aerosoft One.
Version for X-Plane 12: v1.0.0
Version for X-Plane 11: v1.4.1
xp12 pictures
-
Hallo,
inzwischen gibt es unseren Airport Dortmund auch für X-Plane 12.
Kunden, die die Version für X-Plane 11 gekauft haben, können nun auch Dortmund für X-Plane 12 über Aerosoft One installieren.
Version für X-Plane 12: v1.0.0
Version für X-Plane 11: v1.4.1
- 1
- 1
-
Hello,
our Airport Paderborn EDLP is now also available for X-Plane 12.
Customers who have purchased the version for X-Plane 11 can now also install Paderborn for X-Plane 12 via Aerosoft One.
Version for X-Plane 12: v1.0.0
Version for X-Plane 11: v1.0.2
Pictures from XP12
-
Hallo,
jetzt gibt es unseren Airport Paderborn EDLP auch für X-Plane 12.
Kunden, die die Version für X-Plane 11 gekauft haben, können nun auch Paderborn für X-Plane 12 über Aerosoft One installieren.
Version für X-Plane 12: v1.0.0
Version für X-Plane 11: v1.0.2
Bilder aus XP12
- 2
- 1
-
Hello,
the following ToLiss Addon has been updated (fullversion):
ToLiss - Airbus A340-600 XP
AS15574
New version: 1.3.0
New file name: TOLISS_A346_V130.zip
This is V1.3 of the ToLiss A340-600, build 1598
Changes from V1.2.2:
New features:
- Added In-cockpit printer
- Added new ground service vehicles: Cargo loading, animated deicing, Food trucks and passenger stairs
- New cockpit textures
- Added Radio Altimeter faults
- Added new hydraulic overheat model, including HYD ECAM rework as required.
- FADEC needs 2-3 seconds to power up
- Popout windows now remain visible in external view
- Added option to do Pilot Edge ATIS requests
- Added dependency on respective electrical busses for oil press indication validity
- Added Shed and Land Recovery information to SD ELEC pages.
Bug fixes:
- Improved bleed pressure at cruise
- Improved altitude alert logic (C chord and flashing frame)
- Simbrief wind upload should work again. (Note that it extracts the data from the wind data field, not from the flight plan itself.)
- Fixed managed speed profile in Go Around after acceleration altitude
- Removed armed NAV mode when performing a TO without FDs.
- Prevent overwriting of cruise waypoint wind data when reaching TOC or initiating S/Cs.
- improved go around engagement logic, to all GA engagement also in climb phase.
- Added 3s timeout when pressing the status page with status "NORMAL".
- Round metric FCU altitude on PFD to 10m
- Improved logic for C-chord and altitude frame pulsing
- Improved Flight Control Computer backup supply logics
-
Hallo,
das folgende ToLiss Addon wurde im Shop aktualisiert:
ToLiss - Airbus A340-600 XP
AS15574
New version: 1.3.0 (Vollversion)
New file name: TOLISS_A346_V130.zip
This is V1.3 of the ToLiss A340-600, build 1598
Changes from V1.2.2:
New features:
- Added In-cockpit printer
- Added new ground service vehicles: Cargo loading, animated deicing, Food trucks and passenger stairs
- New cockpit textures
- Added Radio Altimeter faults
- Added new hydraulic overheat model, including HYD ECAM rework as required.
- FADEC needs 2-3 seconds to power up
- Popout windows now remain visible in external view
- Added option to do Pilot Edge ATIS requests
- Added dependency on respective electrical busses for oil press indication validity
- Added Shed and Land Recovery information to SD ELEC pages.
Bug fixes:
- Improved bleed pressure at cruise
- Improved altitude alert logic (C chord and flashing frame)
- Simbrief wind upload should work again. (Note that it extracts the data from the wind data field, not from the flight plan itself.)
- Fixed managed speed profile in Go Around after acceleration altitude
- Removed armed NAV mode when performing a TO without FDs.
- Prevent overwriting of cruise waypoint wind data when reaching TOC or initiating S/Cs.
- improved go around engagement logic, to all GA engagement also in climb phase.
- Added 3s timeout when pressing the status page with status "NORMAL".
- Round metric FCU altitude on PFD to 10m
- Improved logic for C-chord and altitude frame pulsing
- Improved Flight Control Computer backup supply logics
-
Hello,
SkylineSimulations has released these airports for X-Plane 12 as an upgrade. They are no longer compatible with X-Plane 11.
For owners of the corresponding X-Plane 11 versions (purchased from Aerosoft) there is a reduced upgrade price (Upgrade Service):
XP12
- Skyline Simulations - CYTZ - Billy Bishop Toronto City Airport
- Skyline Simulations - LXGB - Gibraltar Airport
- Skyline Simulations - KSNA - John Wayne Airport
Greets Heinz
-
Hallo,
SkylineSimulations hat diese Airports für X-Plane 12 als Upgrade herausgebracht. Sie sind nicht mehr mit X-Plane 11 kompatibel.
Für Besitzer der entsprechenden X-Plane 11 Versionen (bei Aerosoft gekauft) gibt es einen reduzierten Upgradepreis (Upgrade Service):
XP12
- Skyline Simulations - CYTZ - Billy Bishop Toronto City Airport
- Skyline Simulations - LXGB - Gibraltar Airport
- Skyline Simulations - KSNA - John Wayne Airport
Gruß Heinz
-
Das Problem wird im offiziellen AirFoilLabs Forum auch beschrieben...
Radio stack texture overlapping issue ANALOG - C172 NG DIGITAL / ANALOG - X-Plane.Org Forum
Ich denke, da wird es Updates geben... falls das nicht gelöst werden kann...
Gruß Heinz
-
Möglicherweise an der Pilotentür links unten auf das AirFolilabs Manual klicken?
Gruß Heinz
-
Hello,
the following addon has been updated (fullversion):
ToLiss - A320 NEO for X-Plane 12/11AS16002
New version: 1.0.3
This is ToLiss A320neo V1.0.3 (Build 1596):
New features:
- Added new C/Bs brining the total number of functional C/Bs to 221
- New faults: Yaw Damper, Rudder Travel Limiter, Rudder Trim
- New faults: Hydraulic system overheat
- FADEC needs 2-3 seconds to power up
- Popout windows now remain visible in external view
- ATIS requests via the Hoppie network can now also query the PilotEdge network
- New failure modes: FADEC faults
- Reordered ECAM messages to represent newer FWC standard
- ACP knobs are now moving up and down
- Added Ignition failures to ECAM. (Use C/Bs to disable ignition)
Bug fixes:
- Corrected labelling issues in Overhead panel and on rear C/B panels.
- Prevented G/S mode engagement with both ratio altimeters failed
- Improved sounds during replay
- Corrected the arrangment of the Taxi and TO lights in the nose landing gear.
- Adapted center tank fuel pump configuration to the new standard
- Changed FMA indication to maximum of CAT 2 when A/THR is not engaged.
- Brought TRx INOP status message back on SD Status page.
- Fixed HYD Page PTU color when conditions for PTU to operate are not met.
- Round metric FCU altitude on PFD to 10m
- Improved FAC FAULT ECAM actions
- Added 3s timeout when pressing the status page with status "NORMAL".
- Use FMGS weights for VLS if initialized.
- Reworked behaviour of the FAC cutout switches
- MCDU APPR speed predictions take current weight, when approach phase active.
- PTU should not be able to power circuits without fluid anymore
- with dual RA fault, LG not down warning should trigger with flaps 3 or 4
- improved go around engagement logic, to all GA engagement also in climb phase.
- Improved ISCS open/closing in VR
- Removed armed NAV mode when performing a TO without FDs.
- Prevent overwriting of cruise waypoint wind data when reaching TOC or initiating S/Cs.
- Improved contour matching for artifical cockpit window reflections
- Fixed managed speed profile in Go Around after acceleration altitude
- Simbrief wind upload should work again. (Note that it extracts the data from the wind data field, not from the flight plan itself.)
- Fixed number of blades in the PW1100G engine.
- Improved bleed pressure at cruise
- Improved altitude alert logic (C chord and flashing frame)
- Fixed logic for ELAC/SEC reversion to backup power supply
- Maintain VHF selection in the RMPs during power tranients
- Improved Dept RWY remapping on situation load
- Improved logic for MCDU class II messages
-
Hallo,
das folgende ToLiss Addon wurde im Shop aktualisiert:
ToLiss - A320 NEO for X-Plane 12/11AS16002
New version: 1.0.3 (Vollversion).
This is ToLiss A320neo V1.0.3 (Build 1596):
New features:
- Added new C/Bs brining the total number of functional C/Bs to 221
- New faults: Yaw Damper, Rudder Travel Limiter, Rudder Trim
- New faults: Hydraulic system overheat
- FADEC needs 2-3 seconds to power up
- Popout windows now remain visible in external view
- ATIS requests via the Hoppie network can now also query the PilotEdge network
- New failure modes: FADEC faults
- Reordered ECAM messages to represent newer FWC standard
- ACP knobs are now moving up and down
- Added Ignition failures to ECAM. (Use C/Bs to disable ignition)
Bug fixes:
- Corrected labelling issues in Overhead panel and on rear C/B panels.
- Prevented G/S mode engagement with both ratio altimeters failed
- Improved sounds during replay
- Corrected the arrangment of the Taxi and TO lights in the nose landing gear.
- Adapted center tank fuel pump configuration to the new standard
- Changed FMA indication to maximum of CAT 2 when A/THR is not engaged.
- Brought TRx INOP status message back on SD Status page.
- Fixed HYD Page PTU color when conditions for PTU to operate are not met.
- Round metric FCU altitude on PFD to 10m
- Improved FAC FAULT ECAM actions
- Added 3s timeout when pressing the status page with status "NORMAL".
- Use FMGS weights for VLS if initialized.
- Reworked behaviour of the FAC cutout switches
- MCDU APPR speed predictions take current weight, when approach phase active.
- PTU should not be able to power circuits without fluid anymore
- with dual RA fault, LG not down warning should trigger with flaps 3 or 4
- improved go around engagement logic, to all GA engagement also in climb phase.
- Improved ISCS open/closing in VR
- Removed armed NAV mode when performing a TO without FDs.
- Prevent overwriting of cruise waypoint wind data when reaching TOC or initiating S/Cs.
- Improved contour matching for artifical cockpit window reflections
- Fixed managed speed profile in Go Around after acceleration altitude
- Simbrief wind upload should work again. (Note that it extracts the data from the wind data field, not from the flight plan itself.)
- Fixed number of blades in the PW1100G engine.
- Improved bleed pressure at cruise
- Improved altitude alert logic (C chord and flashing frame)
- Fixed logic for ELAC/SEC reversion to backup power supply
- Maintain VHF selection in the RMPs during power tranients
- Improved Dept RWY remapping on situation load
- Improved logic for MCDU class II messages
-
Hallo EKKI,
nein, da ist leider nicht möglich. Das klappt nicht. Die Datenbanken passen nicht...
Sonst hätten unsere IT-leute das gemacht. Da bin ich sicher....
PS: Sorry, dass ich nicht bescheid gegeben habe....
-
The following Addon has been updated (fullversion):
FPS - Embraer E-195 XP12AS16094
New version: 1.20
Changelog V1.2
- Improved Cockpit textures
- Improved External textures
- Improved FMOD engine sounds now with a 360 degrees expression
- Improved wing flex
- Improved flight model and dynamics for new XP v12.07
- Updated acf data for x-plane 12.07
- Added 12 new Paint Schemes
-
das folgende Addon wurde im Shop aktualisiert:
FPS - Embraer E-195 XP12AS16094
New version: 1.20
Changelog V1.2
- Improved Cockpit textures
- Improved External textures
- Improved FMOD engine sounds now with a 360 degrees expression
- Improved wing flex
- Improved flight model and dynamics for new XP v12.07
- Updated acf data for x-plane 12.07
- Added 12 new Paint Schemes
-
Hallo,
zum Thema der OrbX Library:
Inzwischen haben wir die Library aktualisiert.
Einfach mit Aerosoft One durchführen (bei den Abhängigkeiten).
Gruß heinz
-
Hallo Agi,
ja, Aeosoft One bietet auch beide Libraries an (XP11 und XP12).
Aber die für XP12 wird wohl tatsächlich nicht aktuell sein.
Aber das klären wir
Gruß heinz
-
Ich habe das bereits angesprochen im Office...
Wird sicher aktualisiert werden (die Library).
Die Library von der OrbX Seite funktioniert aber.
Ich habe das getestet.
Gruß Heinz
-
Hallo Ditmar,
möglicherweise ist die OrbX Library nicht korrekt geladen oder sie ist nicht aktuell.
Vielleicht war sie schon installiert?
Im Aerosoft One kannt Du die Library bei den "Abhängigkeiten" finden.
Vielleicht einmal deinstallieren dort und dann wieder neu installieren.
Aber ich kümmere mich darum .....
Oder installiere Dir die OrbX Library für X-Plane 12 direkt von der OrbX Seite in dein X-Plane 12.
Orbx Libraries - X-Plane 12 - Orbx (orbxdirect.com)
Dort findest Du sie unter "Freeware" ...
Damit klappt das ..
Gruß Heinz
Nav Data Pro mit X- Plane 12 zum Flight Factor 320
in NavDataPro
Posted
Hallo,
es muss der X-Plane 11 Datensatz für den FF A320 Ultimate in den X-Plane 12 A320 Ultimate Extended geladen werden.
X-Plane 12 beenden.
NavDataPro (NDP) v2.1.1 (oder höher) starten.
Dann unter der Spalte "Produkte" den X-Plane 11 anwählen.
Dort den FlightFactor A320 Ultimate finden.
Dort mit "Pfad ändern" den Pfad zum A320 Ultimate Ordner im X-Plane 12 eingeben.
Dann mit dem Pfeil nach unten (Symbol) den Datensatz des A320 Ultimate aktualisieren.
Das muss klappen. Getestet.