Jump to content

Hanse

Deputy Sheriffs
  • Content Count

    2686
  • Joined

  • Last visited

  • Days Won

    4

Everything posted by Hanse

  1. A new update 1.0.0.7 is available now which regarding the checklist and copilot solves the following issues: BEFORE ENGINE START CL: Starting issue in connection with GSX closing doors - solved - ECAM PAGES: Manually selected by CL are now reset to standard when next CL item is called CHRONO FO: Set ON when takeoff thrust is set and stopped after landing VC LIGHTS: When C&D as well as TO state is used VC-lights are automatically set to "flight" when TAXI CL is started LANDING LIGHTS: Were not really ON after descending below 10k feet even that OVHD switch was ON - solved BEFORE TAKEOFF - Landing Lights are now automatically switched on when plane enters the departure runway. I therefore will close this topic and ask you if there are still " checklist issues" to open a new thread. Regards, Rolf
  2. A new update 1.0.0.7 is available now which regarding the checklist and copilot solves the following issues: BEFORE ENGINE START CL: Starting issue in connection with GSX closing doors - solved - ECAM PAGES: Manually selected by CL are now reset to standard when next CL item is called CHRONO FO: Set ON when takeoff thrust is set and stopped after landing VC LIGHTS: When C&D as well as TO state is used VC-lights are automatically set to "flight" when TAXI CL is started LANDING LIGHTS: Were not really ON after descending below 10k feet even that OVHD switch was ON - solved BEFORE TAKEOFF - Landing Lights are now automatically switched on when plane enters the departure runway. I therefore will close this topic and ask you if there are still " checklist issues" to open a new thread. Regards, Rolf
  3. A new update 1.0.0.7 is available now which regarding the checklist and copilot solves the following issues: BEFORE ENGINE START CL: Starting issue in connection with GSX closing doors - solved - ECAM PAGES: Manually selected by CL are now reset to standard when next CL item is called CHRONO FO: Set ON when takeoff thrust is set and stopped after landing VC LIGHTS: When C&D as well as TO state is used VC-lights are automatically set to "flight" when TAXI CL is started LANDING LIGHTS: Were not really ON after descending below 10k feet even that OVHD switch was ON - solved BEFORE TAKEOFF - Landing Lights are now automatically switched on when plane enters the departure runway. I therefore will close this topic and ask you if there are still " checklist issues" to open a new thread. Regards, Rolf
  4. A new update 1.0.0.7 is available now which regarding the checklist and copilot solves the following issues: BEFORE ENGINE START CL: Starting issue in connection with GSX closing doors - solved - ECAM PAGES: Manually selected by CL are now reset to standard when next CL item is called CHRONO FO: Set ON when takeoff thrust is set and stopped after landing VC LIGHTS: When C&D as well as TO state is used VC-lights are automatically set to "flight" when TAXI CL is started LANDING LIGHTS: Were not really ON after descending below 10k feet even that OVHD switch was ON - solved BEFORE TAKEOFF - Landing Lights are now automatically switched on when plane enters the departure runway. I therefore will close this topic and ask you if there are still " checklist issues" to open a new thread. Regards, Rolf
  5. A new update 1.0.0.7 is available now which regarding the checklist and copilot solves the following issues: BEFORE ENGINE START CL: Starting issue in connection with GSX closing doors - solved - ECAM PAGES: Manually selected by CL are now reset to standard when next CL item is called CHRONO FO: Set ON when takeoff thrust is set and stopped after landing VC LIGHTS: When C&D as well as TO state is used VC-lights are automatically set to "flight" when TAXI CL is started LANDING LIGHTS: Were not really ON after descending below 10k feet even that OVHD switch was ON - solved BEFORE TAKEOFF - Landing Lights are now automatically switched on when plane enters the departure runway. I therefore will close this topic and ask you if there are still " checklist issues" to open a new thread. Regards, Rolf
  6. A new update 1.0.0.7 is available now which regarding the checklist and copilot solves the following issues: BEFORE ENGINE START CL: Starting issue in connection with GSX closing doors - solved - ECAM PAGES: Manually selected by CL are now reset to standard when next CL item is called CHRONO FO: Set ON when takeoff thrust is set and stopped after landing VC LIGHTS: When C&D as well as TO state is used VC-lights are automatically set to "flight" when TAXI CL is started LANDING LIGHTS: Were not really ON after descending below 10k feet even that OVHD switch was ON - solved BEFORE TAKEOFF - Landing Lights are now automatically switched on when plane enters the departure runway. I therefore will close this topic and ask you if there are still " checklist issues" to open a new thread. Regards, Rolf
  7. There are three panels which have to be switched on CPT, FO and the one on the OVHD and in that sequence...... Regards, Rolf
  8. Meese, if you are on 1.0.0.6 there is only one thing you should do yourself (and not by GSX function) and that is manaually closing the doors! The rest works fine..... Regards, Rolf
  9. Ray, we had some problems with the trim setting but those should be solved with rev. 1.0.0.6. So please update and try again. Now the copilot really sets the trim to all the way down or up to the value stated in the MCDU. Regards, Rolf Meese, if you are on 1.0.0.6 there is only one thing you should do yourself (and not by GSX function) and that is manaually closing the doors! The rest works fine..... Regards, Rolf
  10. Sebastien, I have no idea why you have those issues on the A318-A321 because we did not touch the CL / CoP function...... Regards, Rolf
  11. Gaz, why asking the same question in several threads? We are working on it ..... so please be patient! Regards, Rolf
  12. Gaz, please be a little bit patient.... we are working on the solution. Regards, Rolf
  13. Thomas, please explain your problem a little bit more in detail so that I am able to try to reproduce the issue. What do you mean by "stuck" for LIGHTS OFF as well as for "SEAT BELTS". Are you talking after departing from SLLP at 10.000 resp. 20.000 feet? Normally those functions are based on the actual altitude of the plane regardless the altitude of the departing airport. I just realized that SLLP is already at app. 13.000 feet e. g. the "LIGHTS OFF" are already triggered before TO. This is a special situation for which I currently have no solution........ Rolf
  14. This issue should be solved after updating to 1.0.0.6
  15. Fabian, there is a special thread regarding LANDING LIGHTS in this section. Please have a look into it. The LANDING LIGHTS are no longer a part of the BEFORE TO CL but are switched on when this CL has been finished and the plane starts to move again e.g. when TO clearance is received and the plane enters the runway for takeoff. Regards, Rolf
  16. We use the AUTO setting according to the SOP we implemented. AUTO means that STROBES are going on automatically if the plane is airborne - based on the position of the shockabsorbers....... Regarding the LANDING LIGHTS you are right and we therefore put the issue on our list open items.
  17. Hi, thanks for the indepth answer. But I still have a question: Are you just talking of the light itself on the plane or does the light on the surface p.e. when landing is not illuminating the ground? Regards, Rolf
  18. Hanse

    Panel State

    But what you can do is configure the plane like you need it and save it as a flight using the P3D v4 menu. But if you want to use the CL and Copilot function then there are certain limitations: You can only save a state before COCKPIT PREP CL, TAXI, TAKEOFF, AT CRZ LVL, BEFORE T/D, BEFORE APPR...... Regards, Rolf
  19. Those values are based on ZFW and used for the MCDU INIT B page resp. MCDU PERF TO page. Do not mix it up with the GWCG which includes the fuel and is automatically calculated / displayed on the upper ECAM display after engines have been started. So the procedure I suggested: Use the sliders of the fuel planner until the ZFW is met with the one you got from SimBrief OFP Overwrite the TOTAL fuel amount in the fuel planner Generate Loadsheet MCDU3 "Init Loadsheet" Load the numbers into the plane using GSX, LSK1-3R or INSTANT LOAD LSK4R is quite simple and working well. The values for ZFW as well as ZFWCG can be "transferred" into the MCDU INIT B page by just double clicking the resp. LSK R. The Trim value automatically is transferred into the MCDU PERF TO page.......
  20. Because we believe this topic has been answered we have closed it. If you have any more questions feel free to open a new topic.
  21. With the next experimental update also the fuel planner will be updated and this should solve the problem "fuel calculation" Regards, Rolf
  22. Because we believe this topic has been answered we have closed it. If you have any more questions feel free to open a new topic.
  23. But please make sure that you installed the two files I preveiously attached to my answer of your previous comment..... Regards, Rolf
  24. It seems to me that like some other users you have trouble to start the BEFORE ENGINE START CL. After you completed the COCKPIT PREP CL there should be a massage on the INFOBAR that you should close DOORS or START GSX PB procedure. Did you get that message? If not then something is wrong with your COCKPIT PREP CL - you can check this if there is SKIP ITEM on the MCDU3 CHECKLIST menu available e.g. some settings are missing. Please try again and remember currently do not use GSX to close the doors but do it manually. Regards, Rolf
  25. OK, already fixed and it will be included in the next experimental update.....
×
×
  • Create New...