romair

member
  • Content Count

    38
  • Joined

  • Last visited

Community Reputation

-1 Poor

About romair

  • Rank
    Flight Student - Groundwork

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hallo Oliver Danke für die schnelle Antwort. 1. Meine LEBL ist auf dem aktuellen Stand Version 1.1 2 Der Installationspfad kann und soll ausserhalb des P3D erfolgen. Ja, richtig wenn man nach dem Regime von LM installiert. Leider halten sich AS und deren Entwickler immer noch nicht daran. Der Installer für die 1.1 direkted immer noch auf den von AS festgelegten Ordner Ecosystem/Aerosoft. Aber nicht nur AS macht das auch andere kennen die Steuerdatei add-on.xml immer noch nicht. Auch Simmarket fahrt da ein eigenes Züglein. Mir ist es eigentlich egal. Habe genug Erfahrung um die Scenerien richtig einzubinden. Nach Deinen Anweisungen habe ich jetzt LEBL nochmals neu installiert und auch direkt in den Ordner F:\Prepar3D v4 Add-ons\Sim-wings Barcelona Professional installiert. Ohne nochmals einen Unterordner Aerosoft zu generieren. Warum. Dem P3D ist es so ziemlich egal wo die Scenerien abgelegt werden und nur die Steuerdatei add-on.xml ist massgebend. Nun, mein LEBL hat keine rote Kreuze mehr aber so wie ich recherchierte, hat eine Datei (LatinVFR_LEBL_Stands.xml) im SODE Ordner in der C:\ProgramData\12bPilot\SODE\SimObjects das Problem verursacht. Hatte ich doch mal beim FSX/P3D V3.4 LEBL von Latin Wings drauf gehabt. Klar, FSX und P3D v4.3 sind längstens deinstalliert aber Leichen zu finden ist nicht einfach. Dank Deinen Anweisungen habe ich doch etwas tiefer recheriert deshalb nochmals Dank. Gruess Roger
  2. Hallo Experten Leider habe ich wiederum rote Kreuze mit der Simwings Barcelena Scenery. Die Sode Jetways for Barcelona Prof P3D V4 ist zusätzlich installiert und mit der der SODE-ON.BAT activiert. Der SODE Ordner befindet sich im Pfad des Scenery Ordners : F:\Prepar3D v4\Ecosystem\Aerosoft\Sim-wings Barcelona Professional zusätzlich ist die AS_MEGA-AIRPORT-BARCELONA-PROFESSIONAL_P3DV4_UPD_FROM_1-00-TO_1-01 installiert. Woran kann es dann immer noch liegen mit den roten Kreuzen. Auch die Deaktivierung der SODE mit SODE-OFF.BAT zeigte keine Wirkung. Gruess Roger
  3. romair

    Barcelona Professional Version 1.1

    Hallo Oliver Danke für die Hilfe. Problem gelöst. Da ich sehr viel Support mache, habe ich den FSX-P3DV3.4 und den V4.2 installiert. Dadurch hatte ich immer noch eine XML von LatinVFR vom FSX drin die ich nicht sah. Also diese gelöscht und die Kreuze sind weg. Besten Dank und Gruess Roger
  4. romair

    Barcelona Professional Version 1.1

    Hallo Oliver Danke für den schnellen Support. Habe den SODE Ordner für den P3D V4 jetzt von Sim-Wings heruntergeladen und in den LEBL Ordner kopiert und die SODE.ON.bat laufen gelassen. Die Einträge und Files sind nun bei mir in C:\ProgramData\12bPilot\SODE aber ich habe die roten Kreuze immer noch. Muss halt da weiter recherchieren was da falsch läuft. Bei der LEBL Professional Installation habe kein ReadMe über SODE gefunden. Bräuchte eigentlich keine SODE Jetways aber die Kreuze sind das Problem welche ich ja auch ohne SODE hatte. Ein schönes Wochenende Roger
  5. Hallo Support Nach der Installation der Scenery Barcelona Version 1.1 habe ich an allen Jetways grosse rote Balkenkreuze. Die Scenery ist sonst korrekt und alle Ordner sind über die add-on.xml angemeldet. Kann es sein, dass da SODE Einträge fehlen ?. Was sonst kann die Ursache sein ? Bitte um Hilfestellung. Gruess Roger .
  6. Hallo Bob Gemäss PILOT's Stefan Schäfer ist das abstellen der DX50015 nicht die richtige Lösung. PILOTS sagt, dass das FSGLOBAL Mesh korrekt ist, und wenn das abgestellt wird, ist beim Ausflug eine hässliche Kante vorhanden. PILOTS sagt, dass der Entwickler der AS Malpensa LIMC Scenerie ein angepasstes Mikromesh zur Verfügung stellen muss. Es sei sehr rückständig wenn der Entwickler nur für das alte MS Mesh entwickelt hat. Ich hoffe nun, dass dieses anliegen durch AS an den Scenerie-Entwickler leitet und ich und andere FSGlobal user ein angepasstes Mikro Mesh erhalten. Es wäre wirklich schade , wenn ich diese sonst sehr gute neue LIMC-X Scenerie wieder durch die doch in die Jahre gekommene nicht AS Vorgängerscenerie (SIM GIANTS) ersetzen muss. Roger
  7. Hallo Bob Besten Dank für die prompte und richtige Antwort. Habe FSGU-EU wieder aktiviert und nur die DX050015 auf inactive gestellt. Somit wurde das Problem mit LIMC gelöst. Diese Antwort müsste ich eigentlich vom PILOT's Support erhalten. Danke und Gruess Roger
  8. Hallo Experten P3D Version 3.4 Scenerie Mailand-Malpensa X Version 1.11 hat Erhebungen und Vertiefungen im Bereich der Pisten. siehe Bild hier Habe ORBX FTX Global und Vector installiert und sichergestellt, dass keine ORBX Datei LIMC beeinflusst. Zusätzlich habe ich mit dem Airport Scanner nach eventuell doppelten AFCAD -Layouts gescannt aber auch da keinen Hinweis auf ein Fremdlayout. FSGlobal Ultimate EU ist installiert ob vielleicht da die Ursache liegen kann. Habe EUR abgeschaltet dann ist das Problem gelöst nur weiss man nicht welches .bgl aus FSGU_NG\EUR dazu verantwortlich ist. Vielleicht hat jemand eine Idee welches .bgl dies verursacht ? Gruess Roger
  9. romair

    Madeira Mesh Mega Topic

    Hello Kiprianos On my P3D I have remaining sharp rocks instead of a coastline close to Google Earth sreenshot. I have ORBX/FTX installed and FSGU_NG and I switched all files which I could find in several threads and also on thread above confirmed to the state .inactiv but still the rocks are there. On my FSX I have no ORBX/FTX but UTX/GEX and FSGlobal2010 and I also moved all LPMA/LPPS releated files to .inactive including those in FSGlobal2010. Result: Almost the same sharp rocks westside of LPMA. For your reference I present here the screenshots again. I have really no idea which mesh or scenery addon could disturb LPMA's coastline on the westside. Roger
  10. romair

    Madeira Mesh Mega Topic

    @ MK Studios @Masterhawk After spending more time I could find the trouble maker of the rund cubes North of the LPMA Airport. Jose Alberto here in this thread mentioned about a files called 4320s I remember that the file 4320_WTR_Waterbodies.bgl had made similar trouble on the older Madeira products. I de-acitvated 4320_WTR_Waterbodies.bgl and thee round cubes disapperared from the scenery. Right now there is so far one problem remaining. The sharp rocks on the coastline west side of the Airport. I used the Vector Configuration Tool and removed all cross marks (de-activation) no better result. I made further investigation on ORBX Vector and FSGU_NG and I deactivated both Folders within the SceneryConfigEditor but no better result. I also moved away all ORBX Vector files within the Folder ORBX Vector CVX no better rsult. Probably somebody here have an idea which addon is causing These rocks instead of a proper coast. Roger
  11. romair

    Madeira Mesh Mega Topic

    My P3D Settings in case of meshes are 1m . This was already required by the FSGlobal Ultimate NG. I have also check this problem with switched of FSGlobal Ultimate NG I just can confirm that I have placed LPMA_MK_Terrain.bgl into the subordner scenery of MadeiraX2016 within the P3D already yesterday. regards Roger Hello Mateusz After I recognized those round cubes already with only installed FSGlobal Ultimate NG - EUR and ASI. I switched off the whole Folder FSGU_NG (EUR-ASI but nothing changed still the cubes there. I added AFR to FSGU_NG and made a trial with switched on and and switched off EUR, ASI and AFR but still the same ( cubes close to the AP) I checked the FSGU_NG - AFR folder about N33W017 N32W018 N32W017 .bgl but there is no such file names there. I have names from DX041025.bgl to DX063039.bgl I think I have to contact Pilots Software about my FSGU_NG scenery folder file names . Anyway and anyhow the round cubes near the airport are still existing after switch off FSGU_NG. I will go forward with further checking. Roger @ Masterhawk I opened FSGU_NG and renamed DX043020.bgl to .inactive but the same problem occurs ( 3 round cubes on the hill close to the Airport) The second file you mentioned LocalMeshes\scenery\cvxLPMA.BGL is not existing in FSGU_NG file structure. MK Studio needs further investigation. Roger @Masterhawk Konnte keinen LocalMesh Ordner finden. Habe nur FSGU_NG - AFR. ASI und EUR installiert.
  12. romair

    Madeira Mesh Mega Topic

    My P3D Settings in case of meshes are 1m . This was already required by the FSGlobal Ultimate NG. I have also check this problem with switched of FSGlobal Ultimate NG I just can confirm that I have placed LPMA_MK_Terrain.bgl into the subordner scenery of MadeiraX2016 within the P3D already yesterday. regards Roger Hello Mateusz After I recognized those round cubes already with only installed FSGlobal Ultimate NG - EUR and ASI. I switched off the whole Folder FSGU_NG (EUR-ASI but nothing changed still the cubes there. I added AFR to FSGU_NG and made a trial with switched on and and switched off EUR, ASI and AFR but still the same ( cubes close to the AP) I checked the FSGU_NG - AFR folder about N33W017 N32W018 N32W017 .bgl but there is no such file names there. I have names from DX041025.bgl to DX063039.bgl I think I have to contact Pilots Software about my FSGU_NG scenery folder file names . Anyway and anyhow the round cubes near the airport are still existing after switch off FSGU_NG. I will go forward with further checking. Roger @ Masterhawk I opened FSGU_NG and renamed DX043020.bgl to .inactive but the same problem occurs ( 3 round cubes on the hill close to the Airport) The second file you mentioned LocalMeshes\scenery\cvxLPMA.BGL is not existing in FSGU_NG file structure. MK Studio needs further investigation. Roger
  13. romair

    Madeira Mesh Mega Topic

    My P3D Settings in case of meshes are 1m . This was already required by the FSGlobal Ultimate NG. I have also check this problem with switched of FSGlobal Ultimate NG I just can confirm that I have placed LPMA_MK_Terrain.bgl into the subordner scenery of MadeiraX2016 within the P3D already yesterday. regards Roger Hello Mateusz After I recognized those round cubes already with only installed FSGlobal Ultimate NG - EUR and ASI. I switched off the whole Folder FSGU_NG (EUR-ASI but nothing changed still the cubes there. I added AFR to FSGU_NG and made a trial with switched on and and switched off EUR, ASI and AFR but still the same ( cubes close to the AP) I checked the FSGU_NG - AFR folder about N33W017 N32W018 N32W017 .bgl but there is no such file names there. I have names from DX041025.bgl to DX063039.bgl I think I have to contact Pilots Software about my FSGU_NG scenery folder file names . Anyway and anyhow the round cubes near the airport are still existing after switch off FSGU_NG. I will go forward with further checking. Roger
  14. romair

    Madeira Mesh Mega Topic

    My P3D Settings in case of meshes are 1m . This was already required by the FSGlobal Ultimate NG. I have also checked this problem with switched off the FSGlobal Ultimate NG. I just can confirm that I have placed LPMA_MK_Terrain.bgl into the subordner scenery of MadeiraX2016 within the P3D already yesterday. regards Roger
  15. romair

    Madeira Mesh Mega Topic

    Hello Masterhawk Your response here does not have any relation to my problem. I have a perfekt LPPS and LPMA from the top view to airport ground view. My problem is only the 3 round hills placed in the photo ground opposite side of the terminal building. I have the same result without FSGlobal Ultimate AFR and with the installed FSG Ultimate NG AFR. So far no difference. FSGlobal Ultimate NG have other file names in their scenery Folders. Example: DX043027.bgl It seems that this 3 round hills are not caused by the FSGlobal Ultimate NG. From the top view so far I can not opserve any problems. LPPS have a nice colour on the AP and on the Island. LPMA have a dark green round the airport and a more bright green on the Island. This is not a problem for me because many other airport addons have the same apperance. Have a look again to my last creenshots. Helo Hello MK Studio Experts Your description above is almost the as we had to use on the older Madeira X your help and your detailed description is much appreciated. Thanks. With concern to my screenshot about round tubes on the hill of north of Madeira AP I have not installed FSGlobal2010 I have installed FSGlobal Ultimate. I made a trial with switched off FSGlobal Ultimate but so far the same picture. If FSGlobal would interupt Madeira it will be not easy to find the responsible .bgl but anyway I switched of the whole Global Ultimate Folder for testing. I do not have UTX on P3D 3.4 only ORBX/FTX and there I have no active LPMA and LPPS .bgl Not further advise. Roger Hello Masterhawk Your suggestion does not match my problem. I have not installed AFR within FSGlobal Ultimate My cliffs/hills are above the hills near LPMA must be troubled by an other source. Roger Hello Masterhawk Your response here does not have any relation to my problem. I have a perfekt LPPS and LPMA from the top view to airport ground view. My problem is only the 3 round hills placed in the photo ground opposite side of the terminal building. I have the same result without FSGlobal Ultimate AFR and with the installed FSG Ultimate NG AFR. So far no difference. FSGlobal Ultimate NG have other file names in their scenery Folders. Example: DX043027.bgl It seems that this 3 round hills are not caused by the FSGlobal Ultimate NG. From the top view so far I can not opserve any problems. LPPS have a nice colour on the AP and on the Island. LPMA have a dark green round the airport and a more bright green on the Island. This is not a problem for me because many other airport addons have the same apperance. Have a look again to my last creenshots.