Fatman
-
Posts
59 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Fatman
-
-
Please check if you need to renew subscription. My connection (checked at 05:50Z) is fine.
Go to "Configuration" -> "General" and then check "Server subscription" section.
Cheers!
-
Stephen,
all is well now.
Thanks!
-
I confirm that there is a server issue:
Hope this will be an easy fix.
-
Glad that it is fine. My approach is very manual.
I always plan my routing (and then use finder feature to check if the software comes up with an alternative routing.
That means that I try to take a benefit of winds (or to avoid them) and following shortest route possible. It is trial error process. When certain fixes don't work, I try to search for another route, using fixes without any limitations (I have to say that Germany, France, Switzerland are possibly to hardest countries). Central and Eastern Europe seems more relaxed.
When my OFP has no yellow notifications, then I am happy.
-
As per this website, PROF205 is error that you are off the mandatory routing.
https://contentzone.eurocontrol.int/fpl/errorsearch.aspx
If you are looking for EGSS to LTBJ route, may I suggest the following (it seems to be fine):
(FPL-4XICB-IN
-B744/H-SDFGHIJ3J5RUWXY/SD1
-EGSS2050
-N0485F350 CLN M84 KONAN UL607 REMBA DCT LIRSU DCT NONKO DCT
VIBOM DCT NOMBO DCT RIDAR DCT LATLO DCT OBEDI DCT MAGAM DCT
ROLBA DCT AGLIB DCT VABEK UL603 OLOTA DCT RUGAS UN128 RIKSO
-LTBJ0258 LTBA
-PBN/A1B1C1D1L1O1S2 DAT/1FANSP DOF/230110 REG/4XICB
EET/EBUR0015 EDUU0034 LOVV0109 LJLA0120 LDZO0126 LQSB0133
LYBA0151 LWSS0206 LGGG0216 LTBB0246
SEL/ESMR CODE/738C05 RVR/200 OPR/ICL ORGN/KDENXLDS
RMK/TCAS EQUIPPED
-E/0410)- 1
-
Pavel,
thanks for your reply. Getting Brno now. And I will check your plans as well.
Cheers,
Andrej- 1
-
Hello Pavel,
just learned that you released LZIB scenery for MSFS. I am getting it now. What other airports for MSFS have you done, as I want to support your work.
Thanks!
Andrej- 1
-
Stephen,
thanks for your reply. I checked this morning, and it all is fine now. Thank you for your help once again.
Re: Weather
My weather is observed at 27-OCT @ 06:00Z with validity till 29-OCT @ 06:00Z. There were same instances when it did not update, but most of the time (99%) it is updated no later than end of the validity.
-
Stephen,
I am getting error message. Can not connect to server. It this a new issue?
Thanks!
Andrej -
Dear Stephen,
happy to report that METARS are back alive (at least on my PC ).
E.g.:
Thanks!
Andrej -
Today, PFPX is not providing METAR data for airports. NAVDATA and Weather is updated. Is this an isolated problem? TAF works fine.
Example:
Thanks! -
When you have such issue, always check upper limit on airways. For example, Italian airspace does have upper airways, but are limited to FL305 only. Then it is DCT routing.
-
Will,
I believe that only FIRs/UIRs can be excluded, not countries. Having said that, some countries are only one FIR/UIR (like Syria, Czech Republic, Belgium, or the UAE). But for nations such as the USA, Russia, Germany, or Canada, you need to prohibit each FIR/UIR.
You can actually prohibit also airways, waypoints, navaids, and sub-routes. In your Configuration setting, click on Planning / Units and this way you permanently prohibit these areas.
On "ad-hoc" basis, you can prohibit the same, when you choose Advanced Route Finder tool.
Cheers,
Andrej
-
From my experience, my flight history is valid for 3 days only. Not sure if that is a general setting, but I don't see flights older that that.
-
Kyle,
I am afraid not (I would really like for the developer to update the link, if it is a quick fix). However, Stephen's workaround is very simple process (you need 3 more clicks only).
On 6/7/2022 at 5:12 PM, srcooke said:However you can simply copy the ATC route and use the 'Import ICAO FPL' function on the Vatsim prefile page.
It is a really easy process. Only thing is that Fuel Endurance does not get uploaded automatically (in my case), so I have to type that one it.
- 1
-
-
Stephen,
quick question. How to I designate "sub-route". I created few sub-routes, but I am not sure how to categorize them.
Thanks!
Andrej -
Hello Stephen,
thank you for reply. I will look into it.
Cheers,
Andrej
-
Hello all,
is there any easy way to find out preferred routes (arrival / departure) for a specific airport? As my primary HUB is EDDK, I tend to spend a lot of time finding appropriate routes in last 300 NM of my flight segment. I tend to copy / save proven routing, but if there is any specific tool within the PFPX that could help me out, I would like to know about it.
Thanks for all your help!
Cheers,
Andrej -
Very sad news. I hope that server subscription will continue for years to come. Despite the fact that PFPX could be updated (I don't expect it for free), it is still the best flight planning tool our there.
I guess that if Navigraph would buy PFPX license, we could see further development, but sadly that is not the case.
On 11/10/2021 at 1:27 AM, Sharky said:Dispite this sad news, I will still continue to provide the RAD Restrictions and Directs for each AIRAC in the Download area.
Best regards
David
David, thank you for your continuous support!
16 hours ago, Mathijs Kok said:Yes, but not sure how long.
Mathiijs, would you give us heads-up if there is a plan not to sell subscription services anymore? My expires in FEB-2022.
Thank you,
Andrej
KORD departure routing question
in Professional Flight Planner X (not for sale anymore)
Posted
Will,
Is this something you are looking for?
https://zauartcc.sfo3.digitaloceanspaces.com/downloads/Route-Maps.pdf
Whenever there some uncertainty about local procedures, I like to refer to a specific facility at VATSIM. Policies and SOPs should be following the real world procedures.
Based on this, I found a this document. I have to say that KORD is one of a few airports that has only one SID (I want to say that this is more US thing, but I am happy to be corrected).
Cheers!