Jump to content

scand

Members
  • Content Count

    27
  • Joined

  • Last visited

Everything posted by scand

  1. Is AES still supported if so, there is no server for downloading Thanks! Cheers. Alex Scandrett
  2. Hello, Is it possible for one to change a flight in the logbook/pilot to another logbook/pilot that is established within the program? I flew a flight and failed to change the logbook and pilot! Thanks! cheers Alex S. [scand]
  3. I am getting a message that the installer is not a Windows installer and to contact the vendor. I already have 3.0 installed, without having any problems! Thanks! Alex
  4. My motherboard crashed, Have to start from scratch all of FS9 How do I get my airports back? I have re installed the airports, but how do I get credit for AES credits restored? Thanks! Alex
  5. I still believe from day 1 of the English version either download or Box, that there is a problem with the files being loaded in both the Campaign and free ride modes. The Mission mode runs as designed. There are several posts made in the TML forums that make me to believe further that this is the problem. 1] In Chapter 3 after the introdution video, you are asigned a back up bus at the UN. After the video ends, Carlos is in the vicinity of the bus with Isabell waiting in the background. Carlos boards the bus and Isablle enters the bus talks with Carlos. Now the bus has not been activated, so there is nothing you can do until Isabell walks towrads the back of the bus. That never happens; She is standing opposite Carlos with her legs moving but not going anywhere. Now you have to quit and reload the game. In my case, it took three attempts to get past that segment and to complete the Mission. Chapter 4 and 5 had problems along the same line but after several attempts, the Chapters were completed. 2] Chapter 6 was the real problem. After the introduction and phone call, Carlos goes out to go to the BG to talk to Jack and also to get the towtruck to go to SQ. I noticed while he was walking the Frame rates took a nose dive. Getting in the truck, MAX speed was only 8 MPH and CBS exe encoutered a problem and needs to close. That happened on several attempts. Finally, after a dozen attempts without CBS problems, I managed to get to to the bus and move it. Received the phone message from Jack to take the truck home. Drove to his apartment and parked the truck in front next to the front door, where the the pink cone that you enter the building, that was all there was at the location. Haven't been able to get that far again. The German version has no problems, but I can't read or speak any German. My thoughts are that Aerosoft when packing the folders was in a great haste to get the product on the market, and messed up the procedure. Is there any chance, someone can double check this to make sure it was done correctly? Thanks! Regards, Alex
  6. I have read within TML Forum of similar issues. I have discovered that most of the files are going in the the proper folders, but quite a few are going astray within the HD. Those were removed after uninstalling and the Drive defragmented. Is there a way to exchange the download version for the BOX version as I will pay for the shipping? Thanks! Alex [scand]
  7. I can only get completely through Chapter 3. Throughout Chapter 4 at anytime from reaching the bus to the UN. CBS has encountered a problem and needs to close message appears each time attempted. Zip file = 1,771,230 kbs Control Panel ADD AND REMOVE = 2,678.00MB Properties of Installed Program Size = 2.60GB Size on Disk = 2.61GB 545 files 97 Folders Read Only is checked Something doesn't look right here. Thanks! Alex scand
  8. CBS #1.docCBS #2.doc The background blended in with the change option and missed it the first couple of times. Here is a second problem and I believe I am missing some of the files. I downloaded it to a temp directory. After openining the zip I extracted to a sub directory file TEMP. The icon of the exe file when I opened the temp folder was a white square with blue boundry which is unusual. For example I also downloaded the truck and the icon was a lot different. I went ahead and installed the ENG version and with everything in the options to the lowest scale, the sim during either Campaign or free xxx crashes and receive CBS exe has encountered a problem and has to close. After several reboots I manage to get to the end of Chapter 4 at the UN stop as required by ASSISTANCE. The remaining 6 Passengers did not disembark and ASSISTANCE still reports to go to the UN. Alex [scand]
  9. quote The problem seems to be with the installer not allowing the user to choose the location. I would greatly appreciate any assistance you may have to offer. We have nothing to do with the installation program. It comes from Aerosoft. So please contact the support (support[at]aerosoft.com) to get any assistance. Best regards, Mikey TML Studios [end of quote] I am trying to install the program into another Drive other than the default Drive C G:\Program Files\TML-Studios where I have World of Subways Vol 1. However I am not given the option to do so. Your assistance will be greatly appreciated. Cheers Alex A.M. Scandrett
  10. I see KSJC is listed in 2.01 but can't find the scenery by Mineta The only SJC scenery I find is FSDreamteam. Thanks! scand
  11. OK I will look into that but what you have described it is not FS2004 Compatible but FSX. I have FSX program but not installed. I have all the additional files for it on an external drive and wil use them once I have FSX up and running which will take a lot of time to tweak it the way I want it. I use FLIGHT PANEL STUDIO and it works great for me including FSX, however guges for FSX were limited the last time I looked! Thanks! Alex S
  12. Thomas, Basicallily the guage you are using is way out of date and won't work in FS2004. It is a Fs 98 Guage. FS2004 wont use it that is why it only shows up on FSMAP Desktop and not in FS2004 Panels! You may want to use an updated Panel Software to create your guage. The FS MAP Chart files I am still working on. It may become necessary for you to create the charts for your program ustilizing updated software! Thanks! Alex S
  13. I have encountered thus far two major Problems. 1] Even though charts have the required proper EXT. and were created PRIOR to FS MAPS released, they probably won't be compatible. The same goes with running FS2002 Aircraft in FS9 [FS2004] The file EXT's are the same but most won't work! 2] As stated in the manual on page 35 the istallation of the guage does not fuction properly. In the past I either have used the payware FS PANEL STUDIO to install similar type gauges or have used the software author's version of the SIE installer. Your method shows up while on the desktop being installed but in the actual Simulator it shows nothing. However, FS 2004 shows that the FSMAP is running but that is all it shows. FSUPIC is up to date along with the necessary Programs needed to run MSFS Just to inform you! Thanks! ALEX Nashville TN USA
  14. Sorry failed to mention that the above is for FS MAP. Alex S.
  15. The format on the registration consists of boxes: a} Serial Number is contiuous line b] " " contains only 21 Characters needs aprox 23 c] Can't copy and Paste using the registration form Is there another registration form possible or different set of keys? Thanks! Alex S
  16. OPabst wrote: Ok, A workaround for you: 1.) Copy (not move) the file AES-KPDX-LIB.BGL from ..AerosoftAESAIRPORTFLIGHTSCN to the ..Addon SceneryFlightZone02_SCScenery directory 2.) Rename the file AESA_KPDX_FTS.CFG in AESA_KPDX_FTS.off (in subdir ..AerosoftAESAIRPORT) Then check KPDX in AESHELP (should not make an error anymore) and check if the jetways can be seen in PDX These two steps is all that is needed to activate KPDX I copied this from page 3 and it does correct the situation. It will be easier here if others are having the same problem. Thanks Again! scand
  17. Thanks for all the help! Hope the above works with me. scand
  18. I have the scenery installed and shows up in the FS2004 Scenery as FlightZonef1 in the Scenery Settings. AES can't find it. The credits are more than suffienct [12] Total Your assistance would be aprreciated. Thanks scand
  19. Thanks Shaun. That did the trick. I believe the Manual on site was from an earlier version since nothing was mentioned about the resolution change. Make sure this is mentioned in the revision. Strange as it may seem, I was close to resolving the issue earlier. While in the 1024 resolution, I should have remain there before rebooting. This time I remain there and and everything is working. Used some credits for activation. A good sign for AEROSOFT but a bad one for me. LOL Thanks for the Assistance CHEERS Alex
  20. If there is ever a problem with FDC use their FORUM first before going through major changes. There is always a simpler fix. Alex
  21. The maual did not say anything about the resolution had to to be 1024 to run AES Help prgram. Everything seems to be all right now. Thanks! CHEERS Alex
  22. In conclusion of an interior inspection of the installed program, it is only a PATCH to the earlier version. The main Program 1.3 as downloaded from the web site only contains .exe for AES Help not the Main Program exe. What I need is the correct Program exe or the location where I can download the earlier version and then install 1.3 over it. If you closely lock at the enlarged file I posted, you will notice that there is no EXIT or any other option located at the bottom of either of the three views. That is the 1st clue that the main program is not running. The 2nd clue is that the installed size of the Progrm under properties indicates 488 files in 19 folders using 38.9 MB of HD. Now going under Programs install/uninstall under Control Panel, I noticed theat the file size was only 1.29MB. That is all I needed to know. In summary I need the original .exe file or, better yet the earlier version of the prgram. I will except the .exe file and hope that it works. If not, I will need the original program! Hope this all helps! ALEX
  23. Here is the whole prgram as It is on the PC That is the program on my PC! Alex
  24. First, I don't have that option. Without going to properties on your desk top, how do you change your Wallpaper? You can't. I can't close ESHelp after I open the airport list. When the intial screen opens, down at the bottom is CLOSE PROGRAM option. However, if I open any of the choices above, the CLOSE PROGRAM disappears and that's the whole Program. Alex
×
×
  • Create New...