Jump to content

LuisVargas

Members
  • Content Count

    118
  • Joined

  • Last visited

Everything posted by LuisVargas

  1. The bus (TAM A319 IAE) not properly following the waypoints' altitudes. It's arriving too down to the programmed altitude.
  2. Thanks, Mathijs. Downloaded and solved!
  3. Receiving this message error at startup. Version 1.2.3.2.
  4. I confirm managed speed drops during descent and I am not using any third part add-on. Managed speed is also making a mess during climb. It stays changing fom THR CLB to SPEED, SPEED to TOGA LK, to AFLOOR...
  5. By the way, are the reverses slow the speed down in a realist way? It's seems to me they spend too much time to reduce the speed to 70 kts when so I begin to apply pedal breaks.
  6. Ok, I will try on others airports with less than 2000 meters at sea levels and above it. I will back with notices about.
  7. I repeated the flight, turned off the AP far way the airport and manually managed to land very close to the headboard of the runway. I applied the reverse and the brakes and I used only 2/3 of the runway to landing. I continued bellow 30 kts on the remainder 1/3 of runway. After a few seconds of silent I heard "APU ON" and nothing more. The A319-IAE was almost arriving to end of a runway when the "AFTER LANDING CL" was executed and finished just when the runway arrived to its end. The "LEAVE RUNWAY" message was not shown. I leaved the runway and taxed to the gates. When I break and stopped the message "SET PARKING BREAK ON" was shown, I did this and the "PARKING CL" was executed with success. I think I still continue making any mistake. Could you please tell me which rules are embedded into the source code for the execution of the message "LEAVE RUNWAY"?
  8. Hello, I am back home (and to simulator). I landed on SBSP which has a relatively short track with 6352 '(1940 m) in extension. The reverse and the braking ended almost at the last exit of the runway. I applyed the brakes until I got the speed less than 30 kts. This time the "AFTER LANDING CHECKLIST" was executed (great!), but as I was already practically on the exit of the runway the "LEAVE RUNWAY" message did not appear and instead of came the message "SET PARKING BREAKS ON" (???). I leave the runway and parked in a gate. I applyed the parking breadk and the "PARKING CHECKLIST" was executed with success. So my 'problem' now is about the "LEAVE RUNWAY" that was not displayed.
  9. I'm away from home spending the holidays. I will return january 4th and I will test leaving runway at speed less than 30nm and only after msg LEAVE THE RUNWAY. I take this opportunity to wish you all a prosperous 2019. Thanks for your help, support and you were so patients with our doubts. Cheers!
  10. By the way, I am with Airbus Pro version 1.2.2.0, was flying with A319-132 IAE using NavDataPro as shown in the attached images.
  11. Flight made with an A319-IAE. I still have checklist problems at the SBSP airport that is 2631 feet above sea level. As shown in the jeppesen's chart SBSP is CAT1 then I entered with 2820 in the BARO (MCDU1) before activating the "DESCENT PREP CL: STARTS IN ...". After the "APPROACH CHECLIST" I confirmed the approach phase in MCDU1. During the final the PFD shows that SBSP is CAT3 (?). Is this a P3D v4.4 error? The "LANDING CHECKLIST" was executed, but when I landed and I leave the runway, neither the "AFTER LANDING CHECKLIST" nor the "PARKING CHECLIST" were executed. Upon stopping at the gate and activating the parking break I could heard a aural "HUNDRED ABOVE". Very strange.
  12. I made other flights and noticed that 'the issue' only happened once (the first time I saw it) and it is not happening anymore. It may have been some mistake of me. For me you can close this post. Thank you.
  13. The problem is with my files in my system. ASUpdater beginning to run after I did some things here. Could some developer tell me which folders (and files) ASUpdater was looking for when send the messages about folders not found?
  14. As shown in the image mcdu1 at lower pedestal panel is not showing the speeds and altitudes constraints but the speeds and altitudes are show in the expanded mcdu (SHIFT+3).
  15. The updater needs get some informations in my system about the installed versions, isn't? And the updater also needs to have update access to my system, isn't? I will take a look in the users permissions to access my files.
  16. Good Morning. I uninstalled the A318/319/320/321 to do a new installation without firewall, antivirus, low UAC, etc. But as I being in despair I would like to try the following: Install the Airbuses on a PC from a friend, run ASUpdater and see if it does the upgrade to version 1.2.2.0. Then take a copy (backup) of all related files, uninstall everything from the friend's PC (of course!), go back home and install again the Airbuses on my PC, and copy the files from the backup overlaying the installed originals files. Any chance of thist working? By the way, is there a limited number of installations for Airbuses? I do not want to be harmed by this. Thanks.
  17. Interesting. ASUpdater can not access the server because the connected host does not respond but entering directly through the browser, I can access the host. I already authorized ASUpdater through the firewall (two applications) and I did not have any results. I disabled Windows Defender and the firewall, and ASUpdater not work either. Something is preventing ASUpdater from connecting to the server because by hand I get it. I will keep trying. The server version file could not be loaded!http://update.aerosoft.com.dedi2593.your-server.de/asupdater/as_a320_a321_prof/asupdater.xml A connection attempt failed because the connected component did not respondcorrectly after a period of time or the established connection failedbecause the connected host did not respond 78.47.8.81:80
  18. Thanks, Tom. I will take a look what I can do here.
  19. I have already made all the suggestions that have been given to me. If nothing else can be done, please close this post. I will wait for the future possibility of a complete download of the airbuses. Thanks.
  20. Sorry I become a boring person and ask again, but would there be any possibility of having in our accounts the link to the full and current version of the ours purchased add-ons? My Airbus is still version 1.2.1.0 and I would like to try version 1.2.2.0.
  21. Hi Fabian and Tom. First of all, Tom I beg your pardon for my multiples posts. Second, I already did that, that is, disable firewall, antivirus and down UAC. Fabian, I applyed the app you suggest and run ASUpdater after that. Nothing working as before. Half-hour running and doing nothing as you can see at images (and time at lower right corner). I think the problem is not here in my side because I already have the same problem (see link bellow) and it was solved with a new installer of ASUpdater. Best regards.
  22. This monday morning the ASUpdater (version 1.1.11.0) answered something. I hope it helps. Aerosoft A320-A321 Professional: The server version file could not be loaded! http://update.aerosoft.com.dedi2593.your-server.de/asupdater/as_a320_a321_prof/asupdater.xml System.Net.WebException: Unable to connect to remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected component did not respond correctly after a period of time or the established connection failed because the connected host did not respond 78.47.8.81:80 in System.Net.Sockets.Socket.DoConnect (EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.ServicePoint.ConnectSocketInternal (Boolean connectFailure, Socket s4, Socket s6, Socket & socket, IPAddress & address, ConnectSocketState state, IAsyncResult asyncResult, Exception & exception) --- End of internal exception stack trace --- in System.Net.HttpWebRequest.GetResponse () in System.Xml.XmlDownloadManager.GetNonFileStream (Uri uri, ICredentials credentials, IWebProxy proxy, RequestCachePolicy cachePolicy) in System.Xml.XmlDownloadManager.GetStream (Uri uri, ICredentials credentials, IWebProxy proxy, RequestCachePolicy cachePolicy) at System.Xml.XmlUrlResolver.GetEntity (Uri absoluteUri, String role, Type ofObjectToReturn) in System.Xml.XmlTextReaderImpl.OpenUrlDelegate (Object xmlResolver) at System.Threading.CompressedStack.runTryCode (Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup (TryCode code, CleanupCode, backoutCode, Object userData) in System.Threading.CompressedStack.Run (CompressedStack compressedStack, ContextCallback callback, Object state) in System.Xml.XmlTextReaderImpl.OpenUrl () at System.Xml.XmlTextReaderImpl.Read () in System.Xml.XmlLoader.Load (XmlDocument doc, XmlReader reader, Boolean preserveWhitespace) in System.Xml.XmlDocument.Load (XmlReader reader) in System.Xml.XmlDocument.Load (String filename) in ASUpdater.MainWindow.GetProductList () *** This product will be ignored! *** Regular as well as experimental updates are available for installation
  23. Does anyone knows the link for ASUpdater forum? A topic mine was moved to there and I do not know how find it out. Thanks.
×
×
  • Create New...