Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation since 07/07/09 in Files

  1. Version 1.0.0

    23434 downloads

    This is my 2048px Virtual Cockpit for the Aerosoft Airbus A320 & A321. Included are high resolution textures for the pedestal, overhead, FCU, fuses (both, overhead and the back side of the flight deck) and photorealistic buttons and switches made right from photos taken on the real deal. Additional VAS usage is at around 100-150mb in Prepar3Dv3.3. There is no noticable impact on the performance on my or any of the beta testers computers. Painting this took me around 150 working hours plus the countless hours of all the people who helped me with a tremendous effort. Special thanks go out to Holgi for helping me on some parts of the floor and backwall and Frank for taking all the pictures necessary to realise a job like this! Without you guys this would not have been possible! This is the 2048px version of this repaint, a 4096px version will follow soon! You will hardly notice a difference though Due to the enormous effort that went into this (over a month full time work plus countless evenings fiddling around with files and the quirks of our beloved flight simulators) I would apprechiate if you could donate a few € or $ if you like the paint! >>Please Donate if you like this<< (Unfortunately only a German link is possible, however just enter the amount, click login to paypal and then you'll be redirection to your language for the rest of the process ) ------------------------------------------------------------ Installation Instructions (read this... really!) ------------------------------------------------------------ Backup the content of the folder [FSX/P3D mainfolder]\SimObjects\Airplanes\Aerosoft Airbus A320_A321 Base. Unzip the file into a temporary location. Paste the content of the folder A320A321 into [FSX/P3D mainfolder]\SimObjects\Airplanes\Aerosoft Airbus A320_A321 Base. Make sure the content of the three subfolders gets integrated and you should be asked to overwrite 39 files in total. Make sure to overwrite the old files, otherwise this paint will not show correctly. [Important] Delete all files including the word MAINPANEL in the texture.xxx [where xxx stands for the respective name of the livery] folders within the [FSX/P3D]\SimObjects\Airplanes\Aerosoft Airbus A32x CFM/IAE folders. This is important since FSX will pick files from those folders over those from the fallback folders. [Important] Repeat this step each time you install a new livery since liveries come with their own MAINPANEL files, which however are in the default resolution. See the limitations below. Ensure the Texture_Max_Load in your FSX.cfg/Prepar3D.cfg is set to at least 2048, better 4096. ------------------------------------------------------------- Known limitations ------------------------------------------------------------- The aircrafts registration will no longer show. This is unavoidable since the registration is saved in the mainpanel file which I had to alter. Thus you need to delete the mainpanel file in which the registration of the aircraft is saved. Please ask your repainter to supply you with a version of my mainpanel file including the registration of the aircraft. Painters are explicitly allowed to modify the mainpanel files supplied in this package to add the registration of the aircraft and upload them to this forums. Only the dark night lighting version was possible. Do not use the Airbus Configurator to change between the bright and dark lighting options! These are not compatible with this repaint. Final words: I hope you will have as much fun flying with my repaint than I had painting it. . . . . . ...you really read all the way down here here? Stop reading and go flying!
    30 points
  2. Version 1.0.0

    8284 downloads

    This is my 2048px Virtual Cockpit for the Aerosoft Airbus A318 & A319. Included are high resolution textures for the pedestal, overhead, FCU, fuses (both, overhead and the back side of the flight deck) and photorealistic buttons and switches made right from photos taken on the real deal. Additional VAS usage is at around 100-150mb in Prepar3Dv3.3. There is no noticable impact on the performance on my or any of the beta testers computers. Painting this took me around 150 working hours plus the countless hours of all the people who helped me with a tremendous effort. Special thanks go out to Holgi for helping me on some parts of the floor and backwall and Frank for taking all the pictures necessary to realise a job like this! Without you guys this would not have been possible! This is the 2048px version of this repaint, a 4096px version will follow soon! You will hardly notice a difference though Due to the enormous effort that went into this (over a month full time work plus countless evenings fiddling around with files and the quirks of our beloved flight simulators) I would apprechiate if you could donate a few € or $ if you like the paint! >>Please Donate if you like this<< (Unfortunately only a German link is possible, however just enter the amount, click login to paypal and then you'll be redirection to your language for the rest of the process ) ------------------------------------------------------------ Installation Instructions (read this... really!) ------------------------------------------------------------ Backup the content of the folder [FSX/P3D mainfolder]\SimObjects\Airplanes\Aerosoft Airbus A318_A319 Base. Unzip the file into a temporary location. Paste the content of the folder A318A319 into [FSX/P3D mainfolder]\SimObjects\Airplanes\Aerosoft Airbus A318_A319 Base. Make sure the content of the three subfolders gets integrated and you should be asked to overwrite 33 files in total. Make sure to overwrite the old files, otherwise this paint will not show correctly. [Important] Delete all files including the word MAINPANEL in the texture.xxx [where xxx stands for the respective name of the livery] folders within the [FSX/P3D]\SimObjects\Airplanes\Aerosoft Airbus A31x CFM/IAE folders. This is important since FSX will pick files from those folders over those from the fallback folders. [Important] Repeat this step each time you install a new livery since liveries come with their own MAINPANEL files, which however are in the default resolution. See the limitations below. Ensure the Texture_Max_Load in your FSX.cfg/Prepar3D.cfg is set to at least 2048, better 4096. ------------------------------------------------------------- Known limitations ------------------------------------------------------------- The aircrafts registration will no longer show. This is unavoidable since the registration is saved in the mainpanel file which I had to alter. Thus you need to delete the mainpanel file in which the registration of the aircraft is saved. Please ask your repainter to supply you with a version of my mainpanel file including the registration of the aircraft. Painters are explicitly allowed to modify the mainpanel files supplied in this package to add the registration of the aircraft and upload them to this forums. Only the dark night lighting version was possible. Do not use the Airbus Configurator to change between the bright and dark lighting options! These are not compatible with this repaint. Final words: I hope you will have as much fun flying with my repaint than I had painting it. . . . . . ...you really read all the way down here here? Stop reading and go flying!
    19 points
  3. Version 1.0.0

    2406 downloads

    This livery has been designed with the utmost attention to detail and all decals have been placed as accurately as possible. Some of you may notice that the luminous tips on the wing have not been added to this aircraft, this is due to Aerosoft's paint kit mirroring them onto the other wing. On this specific model the luminous tips only exist on the right wing, if this is a feature you can't live without please let me know and I will push an update. I’ve painted on light traces of weathering and dirt especially towards the belly and tail area as SWISS generally keep their aircraft in good shape. Also, do be aware that these textures have been created using a heavily modified version of Aerosoft's 2K paintkit, meaning that this texture is over 100MB larger compared to other repaints when decompressed as It's in 4K. Thank you to @John Glanville for his assistance in creating this livery and his alpha layers. *for the Aerosoft A319 Professional for Prepar3D v4.4+ - Not compatible with previous versions of Prepar3D or FSX *This is not a representation of what your aircraft model will most likely look like in your sim with this livery, I am using my own unique TomatoShade preset and reflection profile.
    16 points
  4. Version 1.0.0

    524 downloads

    Recommend use with AIRAC 2102 for best results. Updates for RAD Restrictions and Directs are cumulative. Changelog Update: Route and Altitude/FL Restrictions Update: RouteCharges (Feb 2021) Update: implemented Free Route Airspace Czech Republic (FL095+) Update: implemented Free Route Airspace Germany - Rhine Radar UIR West (FL245+) and South (FL315+) Update: adjustments in RAD and Directs to ensure correct routing - e.g.: Stuttgart EDDS departures southbound via Milano FIR/UIR Best regards David
    15 points
  5. Version 4.0

    6275 downloads

    South Orkney Islands and Antarctic Peninsula, Antarctica. Antarctica4XPlane - Part I I am proud to present Part I of my Antarctica Mesh Scenery Antarctica4XPlane. This first part of my mesh scenery covers the South Orkney Islands and the Antarctic Peninsula down to -76 degrees. More regions will follow in the future: I recommend you to follow the development blog to stay up to date. Antarctica4XPlane is close to its 4th anniversary. Years of joy, but also hard work on this challenging Antarctica Mesh Scenery. I'd like to continue the Antarctica4XPlane project to present further parts of the coldest and driest continent on our earth. However, that isn't possible without support. Thus, if you like the Antarctica4XPlane project and want to support the further development, then please visit the project's support-site and support the further development. Installation is simple: Unarchive the downloaded file and place the folder Antarctica4XPlane_1v4 into your Custom Scenery directory and add the following line near the bottom (below the research base sceneries) of your scenery_packs.ini: SCENERY_PACK Custom Scenery/Antarctica4XPlane_1v4/ Caution: If you are upgrading from an earlier version of Part I, then delete the directory of the old version before you start your simulator. I strongly recommend to switch on "runways follow terrain contours" and if you're already using X-Plane 11 then I recommend you my Antarctic Maps because X-Plane's default map doesn't cover the Antarctic Continent. To start your Antarctica Adventure with Antarctica4XPlane I suggest the Research Base Station Sceneries available on the project's website. First Sceneries are already available and hopefully many more will follow. Antarctica4XPlane comes exclusively for X-Plane, for free and personal use only, but without guarantee and warranty. Antarctica4XPlane is intended for flight simulation only and shall not be used for real life navigation or any other real life purposes. You are not allowed to modify, reverse-engineer or redistribute this scenery or to use any part of it in your own sceneries. Please contact me, if you have questions regarding the license or if you are interested in a cooperation or commercial applications. HAVE FUN. Thanks to The National Snow and Ice Data Center (NSIDC) for digital elevation models The Japan Aerospace Exploration Agency (JAXA) for digital elevation models OpenStreetMap Contributors for their mapping work on the antarctic continent The Scientific Committee on Antarctic Research (SCAR) for additional vector data Nino for the initial ignition of the project, dozens of ideas and his support All contributors and supporters who ensure that the development continues Laminar Research for X-Plane and the permission to use their textures
    15 points
  6. Version 1.0.0

    3712 downloads

    This is a .90 release. I wanted to release it for folks to fly on Christmas but do not have time to do all the little things I want to for it to be 100%. Its certainly flyable in its current state, and I hope you enjoy all the special features I added to this very unique paint. I used a gradient method to paint the surfaces to match as closely as possible to what you actually see when you view this paint in real life. I also created a special technique to emulate the sparkle you see when the sun glint's off the fuse in a certain way. Bar far one of the most complex paints I've ever done. To install this aircraft, copy the following text into your 'aircraft.cfg', inside the folder 'SimObjects\Airplanes\Aerosoft A333 RR Professional'. Replace the XX in [FLTSIM.XX] by the next number in your sequence (like [FLTSIM.11,12 etc]) [FLTSIM.XX] title = Aerosoft A333 professional American N275AY sim = A330-343 model = SD3 panel = sound = texture = N275AY kb_checklists = AirbusA333_check kb_reference = AirbusA333_ref atc_id = N275AY atc_airline = American atc_flight_number = 1000 ui_manufacturer = Airbus ui_type = A330-343 ROLLS-ROYCE ui_variation = American N275AY ui_typerole = Commercial Airliner ui_createdby = Aerosoft atc_parking_types = GATE,RAMP atc_parking_codes = AA description = Airbus A330 - 343 RR / American N275AY \nwww.aerosoft.com\nRepaint by Steve Drabek Next, copy the complete texture.XXXXXXX folder in the zip file to the your \AS Airbus 330\Aerosoft A330 Professional\SimObjects\Airplanes\Aerosoft A333 RR Professional folder (your folder will be wherever you installed the Airbus) That's it! Let me know what you think of this paint....I put a lot of time and attention to it.
    15 points
  7. Version 1.0.0

    473 downloads

    Recommend use with AIRAC 1803 or 1804 for best results. Changelog Update: AltCap, RAD and Directs Update: adjustments in RAD and Directs to ensure correct routing - e.g. via: Rhine Radar UIR Slovakia UIR Slovenia FIR/UIR Croatia, Bosnia and Herzegovina, Serbia and Montenegro FIR/UIR Update: connected LOWL SID points LIDSI and PEROL with FRA relevant points Regards and wish you all happy Easter David
    14 points
  8. Version 1.4.3

    7116 downloads

    DYNAMIC ENVIRONMENT PLUGIN SAM is a native XP11 plugin offering different possibilities to scenery authors focused on animations. It is currently seperated into two main parts: Custom Datarefs You can create custom datarefs without any knowledge and control the values through a settings menu. With user checkboxes you can even let the user control animations such as opening hangars, switching lights and anything else a scenery developer might think of. Jetway Animation We made a deep dive into the world of math to create realistic jetway animations basically because the current software available is not sufficient. Now you can add jetways within seconds to a scenery. _____________________ Performance The plugin is highly optimized for performance. The most obvious part is the fact that calculations for datarefs only start when an object is loaded and in visible range. It can be used in hundreds of sceneries without any noticeable fps impact. The plugin is installed into the main plugin directory, thus it's a global plugin and not per scenery. The sceneries only contain an xml file with the settings. Library A library with pre-animated objects like Jetways, VDGS, Marshaller, Hangars, Wind Turbines etc. is the starting point for developers to experiment with. You can either use these objects or create and animate your own. License The plugin is licensed under CC BY-NC-ND 4.0 which means it is free to use for all users and for all freeware sceneries. If you are a payware developer you can get a license for your project here. Compatible OS Windows 10 | Linux | MacOS 10.14+ Installation Please install SAM Suite, run it and select the features of choice to download and install Support Please use our help desk in case you need any help.
    13 points
  9. Version 1.0.0

    3000 downloads

    Airbus A319 British Airways G-EUOH The Dove livery for the Aerosoft A319 IAE model.
    13 points
  10. Version 1.0.0

    1170 downloads

    Repaint of Airbus A319 CFM Sharklets ACJ D-ALEX. This is my first repaint and I tried my very best. It was a little bit difficult to get a smooth transition between the fuselage and the vertical stabilizer but I'm happy with the result. Thanks to Stefan Hoffmann for the great paintkit and for some good explanations in the forum on how to properly use it. Hope you enjoy it.
    13 points
  11. Version 1.0.0

    9895 downloads

    Contents of this ZIP-package: Airbus A321 IAE Lufthansa D-AIDL (clean and dirt) Repaint by: Holger Sobl Aerosoft paintkit by: Stefan Hoffmann Installation (Airbus Livery Manager): Start the aerosoft Airbus Livery Manager and drag the ZIP-File into the list - or click "Add Livery" and select the desired file. You get a preview of the new livery - and install it with just one click. (You can read all Livery Manager functions by clicking the "?" button!) If you are looking for more or other repaints then you can also look on my homepage http://simtexture.de!
    12 points
  12. Version 1.0.0

    519 downloads

    Recommend use with AIRAC 1812 for best results. Changelog Update: AltCap, RAD and Directs The archive file can be opened with e.g. 7-zip, IZarc, Winrar, ... Regards David
    12 points
  13. Version 1.1.2

    5102 downloads

    Lufthansa "New Colors" D-AISP Airbus A321 DO NOT ALTER, EDIT OR UPLOAD THIS PAINT TO ANY WEBSITE WITHOUT MY EXPLICIT PERMISSION. Use AirbusX Extended Livery Manager. Follow the instructions in Readme! Requests are paid! http://www.texturasbrasileiras.com/
    12 points
  14. Version 1.0.0

    955 downloads

    Thias is the Lufthansa special livery, called "5 Starhansa". Lufthansa is the first european airline with 5 stars in the Skytrax rating.
    12 points
  15. Version 1.0.0

    450 downloads

    Recommend use with AIRAC 2103 for best results. Updates for RAD Restrictions and Directs are cumulative. Changelog Update: Route and Altitude/FL Restrictions Update: RouteCharges (Mar 2021) Best regards David
    11 points
  16. Version 1.00

    18924 downloads

    Contents of this ZIP-package: Airbus A319 CFM easyJet G-EZDE (clean and dirt) Repaint by: Holger Sobl Aerosoft paintkit by: Stefan Hoffmann Installation (Airbus Livery Manager): Start the aerosoft Airbus Livery Manager and drag the ZIP-File into the list - or click "Add Livery" and select the desired file. You get a preview of the new livery - and install it with just one click. (You can read all Livery Manager functions by clicking the "?" button!) If you are looking for more or other repaints then you can also look on my homepage http://simtexture.de!
    11 points
  17. Version 1.0.0

    457 downloads

    Recommend use with AIRAC 2101 for best results. Updates for RAD Restrictions and Directs are cumulative. Changelog Update: Route and Altitude/FL Restrictions Update: RouteCharges (Jan 2021) Update: adjustments in RAD and Directs to ensure correct routing - e.g.: Athens LGAV departures via Skopje UIR Best regards David
    11 points
  18. Version 1.0

    2857 downloads

    Coats Land and Queen Maud Land, Antarctica. Antarctica4XPlane - Part III The Antarctic Adventure continous! I am proud to present Part III of my Antarctica Mesh Scenery Antarctica4XPlane. It covers Coats Land and the western parts of Queen Maud Land, down to -81 degrees. Suitable add-ons as well as more regions will follow in the future: I recommend you to follow the development blog to stay up to date. Creating a Antarctica Mesh Scenery is a quite difficult and time-consuming task. That's due to missing or not accurate data in the public domain. Many parts of this mesh scenery were modeled by hand, and a lot of passion went into this project. However, this ambitious freeware project cannot keep alive without support. Thus, if you like the Antarctica4XPlane project and want to support the further development, then please visit the project's support-site and support the further development. Installation is simple: Unarchive the downloaded file and place the folder Antarctica4XPlane_3v1 into your Custom Scenery directory and add the following line near the bottom (below the research base sceneries) of your scenery_packs.ini: SCENERY_PACK Custom Scenery/Antarctica4XPlane_3v1/ I strongly recommend to switch on "runways follow terrain contours" and if you're already using X-Plane 11 then I recommend you my Antarctic Maps because X-Plane's default map doesn't cover the Antarctic Continent. To start your Antarctica Adventure with Antarctica4XPlane I suggest the Research Base Station Sceneries available on the project's website. First Sceneries are already available and hopefully many more will follow. Please note: For this Part 3 doesn't exist so far any custom sceneries. Because of that, I attach an apt.dat (unzip the archive and move the apt.dat into Custom Scenery/Antarctica4XPlane_3v1/Earth nav data/) with some skiways and helipads: EGAH (Halley Research Station), SAYB (Belgrano II Base), AT16 (Neumayer-Station III), DRE1 (Drescher Ice Camp), ABA1 (Aboa Research Station), WSA1 (Wasa Research Station), SVE1 (Svea Research Station), AT12 (Kohnen Station), AT22 (SANAE IV Research Base), AT27 (Troll Research Station) and TOR1 (Tor Research Station). Antarctica4XPlane comes exclusively for X-Plane, for free and personal use only, but without guarantee and warranty. Antarctica4XPlane is intended for flight simulation only and shall not be used for real life navigation or any other real life purposes. You are not allowed to modify, reverse-engineer or redistribute this scenery or to use any part of it in your own sceneries. Please contact me, if you have questions regarding the license or if you are interested in a cooperation or commercial applications. HAVE FUN. Thanks to The National Snow and Ice Data Center (NSIDC) for digital elevation models The Japan Aerospace Exploration Agency (JAXA) for digital elevation models OpenStreetMap Contributors for their mapping work on the antarctic continent Nino for the initial ignition of the project, dozens of ideas and his support All contributors and supporters who ensure that the development continues Laminar Research for X-Plane and the permission to use their textures apt.dat.zip
    11 points
  19. Version 1.0.0

    466 downloads

    Recommend use with AIRAC 2011 for best result. Updates for RAD Restrictions and Directs are cumulative. Changelog Update: Route and Altitude/FL Restrictions Update: RouteCharges (Oct 2020) Update: Sub-Routes.txt Best regards David
    11 points
  20. 14545 downloads

    Hello Folks, Whilst looking around I came across a collection of AES config files that someone had kindly collected and placed them all together. Theres about 40 planes in this bunch payware and freeware. Bests Shaun
    11 points
  21. Version 1.1

    8144 downloads

    Repaint for the Aerosoft Airbus A321-111 CFM in Austrian Airlines Colors. (without "operated by Tyrolean since" since 31 March '15) Resolution: 4096x4096px (HD) Registration: OE-LBK Repainted by: Jakob Rettenwender Content: -Readme -Textures Installation: CAUTION! If Liverymanager isn't working, you have to install the Livery manually! Have Fun and always three greens! Any suggestions? Write me a PM. Pictures are symbolic! They may show a different Registration!
    11 points
  22. Version 1.0.0

    638 downloads

    Recommend use with AIRAC 1813 or 1901 for best results. PFPX version 2 is required. Changelog Update: Eurocontrol.dat (Route and Altitude/FL Restrictions) Update: Restrictive Areas (Europe region) */** Update: RouteCharges (Dec 2018 - Europe region) Update: adjustments in RAD and Directs to ensure correct routing - e.g.: correct usage of directs via Maastricht UIR London Gatwick EGKK departures via Amsterdam FIR/UIR or Copenhagen FIR/UIR Stuttgart EDDS northbound departures - check step 12 in readme on how to update Please check updated Readme.txt for backup and update procedure * UK and Ukraine will be done next release 1902 ** Not all restrictive areas can be activated, as some restrictions would block possible routes via certain airways/directs. which are actually allowed Regards and happy new year David
    11 points
  23. Version 1.0.0

    886 downloads

    Recommend use with AIRAC 1813 for best results. Changelog Update: AltCap, RAD and Directs Update: added Free Route Airspace Maastricht (FL245+ - Nights/Weekend only) Update: added Free Route Airspace Ukraine Lviv-sector (FL275+) Update: added Free Route Airspace Armenia (FL195+) Update: adjustments in RAD and Directs to ensure correct routing - e.g.: Gdansk EPGD arrivals via Rhine Radar Regards David
    11 points
  24. Version 1.0.0

    582 downloads

    Recommend use with AIRAC 1712, 1713 or 1801 for best results. Changelog Update: RAD and Directs Update: minor fixes in RAD to ensure correct routing Update: fixed over 97% of red entries in RAD.dat Update: sort of fixed EDDF arrivals via ASPAT (south-east) and EMPAX (south) - removed temporary directs New: AltCap.dat with up-to-date level capping restrictions Happy New Year Regards David
    11 points
  25. Version 1.0

    22174 downloads

    This ZIP - file contains repaints in the colors of Airbus A320 CFM TAP Portugal CS-TNS (clean and dirt). These textures can be used for the Airbus X and the Airbus X Extended! ... if you are looking for more or other repaints then you can also look on my homepage http://simtexture.de!
    11 points
  26. Version 1.0.0

    2154 downloads

    Added the "NO ACTIVE ATC" message and fixed the bug that the system did not turn off, when the Airbus is cold and dark. Additionally a second option is avaiable with the display completely turned off, even with power ON, since some airlines do just not turn the panels on when not using the panel. Paste the extracted content of the CPDLC_ON or CPDLC_OFF folders, depending on which one you want to use, into [FSX/P3D Mainfolder]\SimObjects\Airplanes\Aerosoft Airbus A320_A321 Base\Panel_Fallback\AB_Systems and overwrite the previous files. If you like my work please consider >>Donating<< CPDLC displays with NO ACTIVE ATC message: And with the displays killed: Please note that the rights to these files still remain with Aerosoft. You are not allowed to redistribute them in any way!
    11 points
  27. Version 1.0.0

    548 downloads

    Recommend use with AIRAC 2013 or newer for best results. Updates for RAD Restrictions and Directs are cumulative. Changelog Update: Route and Altitude/FL Restrictions Update: RouteCharges (Jan 2021) Update: implemented Belarus Free Route Airspace (FL275+) Update: adjustments in RAD and Directs to ensure correct routing - e.g.: Salzburg LOWS departures north-westbound via Rhein UIR Nürnberg EDDN arrivals New: nav file Belarus Free Route Airspace Best regards and happy new year David
    10 points
  28. Version 1.0.0

    2276 downloads

    TAP Air Portugal CS-TOU DO NOT ALTER, EDIT OR UPLOAD THIS PAINT TO ANY WEBSITE WITHOUT MY EXPLICIT PERMISSION. Follow the instructions in Readme! Requests are paid! http://www.texturasbrasileiras.com/ http://www.texturasbrasileiras.blogspot.com/
    10 points
  29. Version 1.0.0

    5887 downloads

    Airbus A320neo from easyJet with the "NEO" special livery G-UZHA delivered on June 14, 2017. INSTALLATION : 1. Copy the "texture.easyJet_GUZHA" folder. 2. Paste it into your FSX main folder : ...\Microsoft Flight Simulator X\SimObjects\Airplanes\Aerosoft Airbus A320 CFM 3. Add the following lines to your "Aircraft.cfg" file, replacing "xx" with the number following the previous FLTSIM.xx number. [FLTSIM.xx] title = Airbus A320 NEO easyJet G-UZHA sim = A320 model = SHARKLET panel = sound = texture = easyJet_GUZHA kb_checklists = kb_reference = atc_id = G-UZHA atc_airline = Easy atc_flight_number = ui_manufacturer = Airbus ui_type = A320-214 CFM ui_variation = easyJet NEO ui_typerole = Commercial Airliner ui_createdby = Aerosoft atc_parking_types = GATE, RAMP atc_parking_codes = EZS, EZY description = Enjoy !
    10 points
  30. Version 4.0

    4093 downloads

    Victoria Land and Transantarctic Mountains, Antarctica. Antarctica4XPlane - Part II I am proud to present Part II of my Antarctica Mesh Scenery Antarctica4XPlane. This second part covers the Victoria Land and the northern parts of the Transantarctic Mountains down to -81 degrees. More regions will follow in the future: I recommend you to follow the development blog to stay up to date. Antarctica4XPlane is close to its 4th anniversary. Years of joy, but also hard work on this challenging Antarctica Mesh Scenery. I'd like to continue the Antarctica4XPlane project to present further parts of the coldest and driest continent on our earth. However, that isn't possible without support. Thus, if you like the Antarctica4XPlane project and want to support the further development, then please visit the project's support-site and support the further development. Installation is simple: Unarchive the downloaded file and place the folder Antarctica4XPlane_2v4 into your Custom Scenery directory and add the following line near the bottom (below the research base sceneries) of your scenery_packs.ini: SCENERY_PACK Custom Scenery/Antarctica4XPlane_2v4/ Caution: If you are upgrading from an earlier version of Part II, then delete the directory of the old version before you start your simulator. I strongly recommend to switch on "runways follow terrain contours" and if you're already using X-Plane 11 then I recommend you my Antarctic Maps because X-Plane's default map doesn't cover the Antarctic Continent. To start your Antarctica Adventure with Antarctica4XPlane I suggest the Research Base Station Sceneries available on the project's website. First Sceneries are already available and hopefully many more will follow. Antarctica4XPlane comes exclusively for X-Plane, for free and personal use only, but without guarantee and warranty. Antarctica4XPlane is intended for flight simulation only and shall not be used for real life navigation or any other real life purposes. You are not allowed to modify, reverse-engineer or redistribute this scenery or to use any part of it in your own sceneries. Please contact me, if you have questions regarding the license or if you are interested in a cooperation or commercial applications. HAVE FUN. Thanks to The National Snow and Ice Data Center (NSIDC) for digital elevation models The Japan Aerospace Exploration Agency (JAXA) for digital elevation models The Land Information New Zealand (LINZ) for relief data resp. contour lines OpenStreetMap Contributors for their mapping work on the antarctic continent The Scientific Committee on Antarctic Research (SCAR) for additional vector data Nino for the initial ignition of the project, dozens of ideas and his support All contributors and supporters who ensure that the development continues Laminar Research for X-Plane and the permission to use their textures
    10 points
  31. Version 1.0.0

    508 downloads

    Recommend use with AIRAC 2005 or newer for best results. Updates for RAD Restrictions and Directs are cumulative. Changelog Update: Route Restrictions and Altitude/FL Restrictions Update: RouteCharges (May 2020) Best regards David
    10 points
  32. Version 1.0.0

    5086 downloads

    easyJet A321 G-UZMA - NEO Livery Engines have been all re-textured to look as close as possible to the CFM LEAP FLTSIM & Instructions in readme Happy Flying !
    10 points
  33. Version 1.0.0

    741 downloads

    Recommend use with AIRAC 1810 for best results. Changelog Update: AltCap, RAD and Directs Update: adjustments in RAD and Directs to ensure correct routing - e.g.: Amsterdam EHAM arrivals via Praha UIR and then Rhein UIR on weekdays The archive file can be opened with e.g. 7-zip, IZarc, ... Regards David
    10 points
  34. Version 1.0.0

    476 downloads

    Recommend use with AIRAC 1805 for best results. Changelog Update: AltCap, RAD and Directs adjustments in RAD and Directs to ensure correct routing - e.g.: Tirana LATI departures/arrivals via Croatia FIR/UIR Bratislava LZIB arrivals via Hungary FIR/UIR Innsbruck LOWI arrivals via Rhine UIR Vienna LOWW arrivals via Praha FIR/UIR London Heathrow EGLL departures via DET SID Dublin Group arrivals via EGTT FIR/UIR Manchester Group arrivals via EGTT FIR/UIR Known issues: Airways P861 in Praha UIR and L60 EGTT UIR not available above FL245 for westbound flights - (maybe due to limitations of PFPX?) Added temporary directs to ensure correct routing. Regards David
    10 points
  35. Version 1.0.0

    977 downloads

    This will only work for the AEROSOFT STORE VERSION of the plane. This will only work for the CRJ700 DEFAULT LIVERIES. INSTALL: Place unzipped " CRJ-textures-mod " folder into your Community folder. Install optional windows mod for dirty windows (the best windows) Default is clean. This is a completely repainted cockpit model using Substance Painter. Real life images were used as references. All images are 4K and the highest quality possible in the sim. This mod was APPROVED by Aerosoft for exclusive upload on this forum only. If I get the Microsoft store version then maybe I could make it compatible with that version. For now, Aerosoft Store version only. Many hours were spent making this one for you all. Enjoy! -MoreRightRudder + tyler58546
    9 points
  36. Version 1.0

    19066 downloads

    This ZIP - file contains repaints in the colors of Airbus A320 CFM Alitalia EI-EIB (clean and dirt). These textures can be used for the Airbus X and the Airbus X Extended! ... if you are looking for more or other repaints then you can also look on my homepage http://simtexture.de!
    9 points
  37. Version 1.0.0

    350 downloads

    Recommend use with AIRAC 2107 for best results. Updates for RAD Restrictions and Directs are cumulative. Changelog Update: Route and Altitude/FL Restrictions Update: RouteCharges (July 2021) Best regards David
    9 points
  38. Version 1.0.0

    514 downloads

    Recommend use with AIRAC 2013 for best results. Updates for RAD Restrictions and Directs are cumulative. Changelog Update: Route and Altitude/FL Restrictions Update: RouteCharges (Dec 2020) Update: adapted RestrictivAirspaceProperties.xml adjustments in RAD and Directs to ensure correct routing - e.g.: Stuttgart eastbound departures via Rhein UIR on weekdays Berlin-Brandenburg EDDB arrivals via Warsaw FIR/UIR Berlin-Brandenburg EDDB departures - correct usage of SIDs for Prop and Jet (xml file from folder AirportInfo required) Frankfurt/Main EDDF arrivals from south-east using correct STAR FAWUR for Jet (xml file from folder AirportInfo required) Best regards David
    9 points
  39. Version 1.0.0

    534 downloads

    Recommend use with AIRAC 2012 for best result. Updates for RAD Restrictions and Directs are cumulative. Changelog Update: Route and Altitude/FL Restrictions Update: RouteCharges (Nov 2020) adjustments in RAD and Directs to ensure correct routing - e.g.: Toulouse-Blagnac LFBO departures north-east using correct SID Brussels EBBR departures east using correct SID Eindhoven EHEH departures south-east via Maastricht UIR Salzburg LOWS arrivals via Rhein UIR Hamburg group arrivals via Rhein UIR Munich EDDM to Düsseldorf EDDL above FL245 Known issues Frankfurt/Main EDDF arrivals from south-east using SPESA STAR instead of new FAWUR STAR. - Workaround: Simply edit generated route and choose FAWUR STAR Best regards David
    9 points
  40. Version 1.0.0

    451 downloads

    Recommend use with AIRAC 2007 or newer for best result. Updates for RAD Restrictions and Directs are cumulative. Changelog Update: Route and Altitude/FL Restrictions Update: RouteCharges (July 2020) Best regards David
    9 points
  41. Version 1.0.0

    5123 downloads

    Converted Aerosoft A321 Professional American Airlines Repaint. Took me a few days but finally got it sorted. ***************************************DISCLAIMER********************************************************************************* THIS REPAINT WAS NOT CREATED BY ME, I HAVE DONE THE WORK TO CONVERT THE LIVERY TO MAKE IT COMPATIABLE WITH THE AEROSOFT A321 PROFESSIONAL. I DO NOT TAKE CREDIT FOR THIS REPAINT NOR DISTRIBUTE IT WITH THE INTENT FOR SALE OR PROFIT.
    9 points
  42. Version 1.0.0

    850 downloads

    Thanks to Aerosoft for allowing me to modify the livery supplied with the 900 paint kit. I've made a number of changes to her. - Adjusted the fuselage base white - Adjusted the blue tones - Changed the registration to N800SK - Added WiFi logo - Added blue to front edge of the wing between landing light and fuselage - Added new registration decal including serial number in the VC - Added new blurred engine fan texture - Added some detail to the main wheels.
    9 points
  43. Version 1.0.0

    598 downloads

    Recommend use with AIRAC 1813 or newer for best results. PFPX version 2 is required. Changelog Update: Eurocontrol.dat (Route and Altitude/FL Restrictions) Update: Restrictive Areas - completed Europe region Update: RouteCharges (Jan 2019 - Europe, USA and Canada) Update: adjustments in RAD and Directs to ensure correct routing - e.g.: Düsseldorf EDDL southbound departures via Brussels FIR / Maastricht UIR or Langen FIR / Rhine UIR Hamburg group (EDDH / EDHI / EDHL) southbound departures via Maastricht UIR Regards David
    9 points
  44. Version 1.0.0

    1145 downloads

    Seven textures for the Aerosoft A320/A21 professional depicting: A320 Jetstar VH-VGU A320 VH-VFX A320 Virgin VH-FNP A320 QANTASLink VH-VQS A320 Tiger Airways VH-VNC A321 Jetstar VH-VWQ A321 Jetstar VH-VYZ
    9 points
  45. Version 1.0

    7702 downloads

    This ZIP - file contains repaints in the colors of Airbus A320 IAE Qatar Airways A7-AHU (clean and dirt). These textures can be used for the Airbus X and the Airbus X Extended! ... if you are looking for more or other repaints then you can also look on my homepage http://simtexture.de!
    9 points
  46. Version 1.0.0

    501 downloads

    Recommend use with AIRAC 1806 or 1807 for best results. Changelog Update: AltCap, RAD and Directs Update: removed Free Route Airspace Bulgaria till October AIRAC Update: adjustments in RAD and Directs to ensure correct routing - e.g.: Cologne/Bonn EDDK arrivals via Brussels UIR across Italy or to/from italian airports (LIB* , LIC* , LIE* , LIP*) Switzerland LS** arrivals via Spain/Portugal UIR Paris CDG LFPG departures via Switzerland UIR Side note: adjustments in RAD and Directs for airports LIM* and LIR* might be included in next update 1808 in July. Known issues: Routes to/from italian airports sometimes use airways instead of directs, regardless of rules in RAD.dat. This is due to guidlines of italian Air Navigation Service Provider ENAV for entry points to or exit points from free route airspace. Those routes are not invalid per se. In most cases you can just replace the airway between mentioned points with DCT in order to pass validation. Regards David
    9 points
  47. Version 1.0.0

    434 downloads

    Recommend use with AIRAC 1806 for best results. Changelog Update: AltCap, RAD and Directs Update: extend Free Route Airspace in Italy and Malta from above FL335 down to FL305 Update: adjustments in RAD and Directs to ensure correct routing - e.g.: Thessaloniki LGTS arrivals via Skopje FIR/UIR Kraków EPKK and Katowice EPKT departures via Bratislava UIR Frankfurt/Hahn EDFH and Luxembourg ELLX arrivals via Praha UIR and then Rhine UIR Luxembourg ELLX departures via Rhine UIR Barcelona LEBL departures via Marseille UIR Regards David
    9 points
  48. Version 1.0.0

    458 downloads

    Recommend use with AIRAC 1709 for best results. Changelog Update: RAD and Directs Update: minor fixes in RAD and Directs to ensure correct routing Regards David
    9 points
  49. Version 1.0

    5761 downloads

    This ZIP - file contains repaints in the colors of Airbus A320 IAE Jetstar VH-VFI (clean and dirt). These textures can be used for the Airbus X and the Airbus X Extended! ... if you are looking for more or other repaints then you can also look on my homepage http://simtexture.de!
    9 points
  50. Version 1.0

    11820 downloads

    This ZIP - file contains repaints in the colors of Airbus A320 IAE Scandinavian Airlines SE-RJE (clean and dirt). These textures can be used for the Airbus X and the Airbus X Extended! ... if you are looking for more or other repaints then you can also look on my homepage http://simtexture.de!
    9 points
×
×
  • Create New...