Downloading and installing

As in UPDATE today you could upgrade to 1.2.5.1 both versions of the AIRBUS and I have both, I upgraded the A318-319 first and made a flight with an A318 CFM a flight of about 600nm to FL245 and with Active Sky weather, everything has worked perfectly without any Failure. Since in the dos it is the same update, I will apply it on the A320-321, I will perform on the same flight with an A320 CFM.

hi these days I cant do a complete flight with the airbus..it goes to ctd in the middle of the flight..i found some report and need your help to solve it please thank you.. the report: EventData Prepar3D.exe 4.5.12.30293 5cd47aad ucrtbase.dll 10.0.18362.267 080a13f7 c0000409 000000000006d33e 794 01d56e2bc360a198 C:\Program Files\Lockheed Martin\Prepar3D v4\Prepar3D.exe C:\WINDOWS\System32\ucrtbase.dll e06a6b32-1e4b-4fff-9681-b911ddfd7c65 thannk u

Hi, while attempting to run Aerosoft Updater, I was met with this message (see screenshot). What does this mean, and how do I locate/install the mentioned update? Thanks, Larry

Hello, when i choiced a full install for the 1.2.5 update, i used the panel of windows 10 for the uninstallation of the 1.2.4. I tested on a flight and i had some bugs. I look for in the folders and i see some files of the previous 1.2.4 update in : user/appl data/roaming/p3d v4.5 . I erased those manually with some others old files that dated since the previous install. The uninstallation with the win 10 program is not enough complete. Now all seem clean and i test today with a flight an all was OK. Really it's important to check a meticulous uninstallation. Michel.

I had an installation problem similar to @globetrotter over here After uninstalling a working 1.2.4 and installing 1.2.5 as i had done in the past, no airbus vehicles were available and the add-in wasn't listed in the p3d startup add-on pane. The A320-A321 entry looked ok in add-ons.cfg and lorby reported no issues, the entry was shown in packages and other addons. The fix The A320-A321 add-on.xml file had an entry for fonts even though no fonts directory was installed in the path. For reference im on Win10 1903. I used Lorby addon organizer to remove the fonts component and saved the xml file. Lorby also reformats it slightly to take out t…

Greetings! Today I downloaded and installed the latest version referenced in the subject line. All went well, but there are a couple of issues that I'm experiencing with the A321 (only model I've flown with the new version thus far): 1. As with all previous versions, the first time I attempt to close the forward left passenger door via the FMS that I bring up with Shift+4, the door closes and then re-opens. I have to click on the "close" button again. Not a big deal, but somewhat annoying. 2. During my pre-taxi flight control check, I noticed when I moved the side controller forward (nose down), the indicator in the lower M…

Hi all, I've just done a fresh install of P3D v4.5 on my recently re-built PC. So far, I've installed P3D and played around a little to check the frame-rate, etc. Then, I downloaded the latest version of the Airbus A318/A319 package and installed it. I disabled all antivirus as usual, and rebooted after what appeared to be a perfect install. However, now when I launch P3D, I get the loading screen for a few seconds, and then nothing. No Scenario Screen to select aircraft, airport, etc. Although in Task Manager, I can see P3D is running and taking a small percentage of the processor, and it's attached to the correct GPU so it SHOULD be on screen…

Hello I am having trouble with my installation of the A320 professional series into P3d v4.5. I have downloaded the update and ran the installer, pointing to a stand-alone folder called "A320 family" outside the P3d root folder. I have ran the Aerosoft updater and it states the products are installed and it states Prepa3D is found, yet the aircraft do not appear in my vehicle menu in the setup. I have search under Aerosoft and ensure it is nothing to with "favourites" being selected. I've also restarted mu computer after install. Any other suggestions what I have missed? thanks

Hello, I am reinstalling the Airbus professional series for P3Dv4 for the airbus A318, 19, 20, and 21. I was receiving an error about the ND file for terrain not being found when I got the aircraft loaded up in the sim, so I decided to do a reinstall. About 75% into the install process, I see a feature transfer error (look at the attached image). What do I do about this? I haven't found any other threads that show the same exact error as I am having. Note: I moved the documents and the downloads folders to my second harddrive (D:)

Which folders should be deleted after uninstall (A3xx) to clean up the System. After this i will install the new version 1.2.5.0 Thanks Frank

Why in the application "Aerosoft Updater" do not introduce the option to do a pre-BACKUP of the entire installation of the AIRBUS, and then apply the UPDATE? Subsequently, if the user weans problems, will always have the adoption from the application, restore the previous installation THAT IF IT WORKED, and wait for another UPDATE to come out solving EVERYTHING, in this way the USER will no longer be the free tester, and that developers are slabs that solve problems.

Hallo, immer wenn ich den A320 aus dem Cold and Dark State holen möchte findet er nach den abgelaufenen 5min nicht das GPS (GPS Primary Lost ), obwohl ich im Overhadpanel Align Irs alles 3 Schalter an gestellt habe. Bei der Version die mit P3d v3 kompatibel ist hat das immer geklappt! bitte um Hilfe vielen Dank

Hello Currently I have the 1.2.4.2 version of both the A319 and the A320. I would like to uninstall it in order to go back to the 1.2.4.0 version. How to make a clean uninstall of it? I was thinking to do the following: - Execute the uninstallers - Remove the Aerosoft A318-A319-A320-A321 Professional folders from the main Aerosoft folder - Remove all the A3XX folders from the Documents/Aerosoft/General folder Anything else that I should remove or something that I should do differently? Thanks

Hi, I have seen the other topic which has been closed. I would just like to reiterate that I have the exact same problem aftre updating the Airbuses a night or two ago. Tonight after work was the first time I was going to try the Airbus after the update. I wanted to do a quick flight from RKSI to RKCP, but that is out the window now due to this error. i am now spending the short time I had to try and fix the issue of my flight not starting. I'm not sure why some don't have the problem, but many obviously do. I get warning messages of the missing files, then when I click OK on those, the flight loads, I get a black screen upon the flight loadin…

Hi guys can you please help to troubleshoot the problem i have thanks! Note batteries can’t also be turned on

Hi Guys, I updated to version 1.2.4.2 but i get an error saying there are missing media files then panel is loaded black then CTD, the files are as below: ASC_Coffee0.wav (which i was able to download from the forum) ASC_DualInput.wav ASC_PriorityLeft.wav ASC_PriorityRight.wav I tried reinstallation then restart (works Well) then update and restart (same issue), only thing that works for me right now is removing these lines from ASC.cfg then the plane will load without issues

Hello, Looking for information re: what is the most recent version of Airbus A319 Professional that is compatible with P3D v4.4 ?? NOTE - NOT interested in Experimental versions. I think I’m back-level on the version, but very happy with my current P3D v4.4. Thanks, Mike

Hello, How would I go about finding which version of the Airbus A319 Professional I have installed in my P3d v4.4 installation?? I have tried looking for a Help/About section, but have been unsuccessful. Thanks, Mike

Nach einem Neu aufsetzten des P3D und der neu version V4.5 habe ich einen Bug dass, wenn ich das Flugzeug von anfang lade alles funktioniert aber wenn ich das Flugzeug neu lade den Kafee-becher, das Natel und die Zeitung aufblokt in der Luft ( Siehe Foto ) was muss ich machen? kann mir jemand Helfen?? Besten Dank im Vorraus und Freundliche Grüsse M Baggenstos

Hello I reinstalled the Airbus A3XX Proffessional after I upgraded to a SSD, and now everytime I start my flights I am getting this notification. I dont know exactly how it affects the performance but the standby frequency for example in the radiopanel is half blacked out. What does this notification mean?

I just bought the Aerosoft A320/A321 professional and downloaded the file, and extracted it to a folder on my desktop. But no matter what I do, i can't get the installer to start. It pops up with the normal "do you want this app to make changes" like normal where you can press yes and no, I press yes and nothing happens. Any help would be appreciated

I installed the new 4.5 on May 12, I did not expect the 14th HF1 to be released, lol, yesterday I updated the HF1 client, in Orbx Innsbruck, the number of frames is very friendly. However, after I installed Aerosoft's 320 1.2.4.1 update, it took off and climbed to 8,000 feet and suddenly intermittently stuck, then CTD. I suspect it is a problem with PTA shaders. The error report in the event viewer is as follows.

I was wondering when the next experimental release with the GSX boarding and cargo fixes might be released. I believe I read on this forum the issue has been solved and will be released with the next experimental release. I am looking to give a large demonstration of the A320 to a group of pilots and would like to also show off the GSX capabilities without all the workarounds to make it work. Anyway I understand you are probably working on several things simultaneously and must test the release changes but I am still curious if it’s on the order of days or weeks before the release. Thanks in advance Joe

I just bought the bundle for p3d v4.4 and I'm in the process of downloading it. Are there any links to a USA site?

Hello, A new installer is available for Aerosoft Updater v1.3.0.1. Can be downloaded from my shop account. Where can I find the latest version? and is full download and install required or can the latest updater version be downloaded as stand alone? My shop account: Best regard