Skip to content

Downloading and installing

All information on how to download, install and update your files.

  1. Started by hrings,

    After downloading nothing functioning as it should. I get a lot of warnings and EZdoc does not work as it does on the 737. Im am unable to see the airbus on the aircraft page and when looking on the sim objects it is not there. All is in the folder of airbus 318/319 wich is an own folder under p3dv4 map. but unable to select. It does not show up under add-ons as well. It says in the set up instruction that this map can be placed where you want if P3d is instructed where to find it. How is that done?

  2. Started by drego22,

    Does anyone have any problem running the Airbus Pro on windows 7? CDU, and avionics are not working! I cant figure it out, I have been searching through the manual and no results, PLEASE help! Thank you in advance! Andre Chambers

    • 9 replies
    • 1.9k views
  3. Started by moskito-x,

    Hello, after the update to .... [Installer] ProductCode=xxx ProductName=Aerosoft A320-A321 Professional Version=1.2.0.1 ProductPage=http://www.aerosoft.com ManualName= ReadmeName=Readme.txt - I lost all my A3xx Liveries just installed last two days. - Now "A3xx Livery Manager" shows only the default entries. - aircraft.cfg lost all additional [FLTSIM.xx] entries. 1.2.0.1 Experimental ...... Corrected thumbnails used in livery manager ..... Is it really professional without warning to reset all aircraft.cfg back to their original state. A warning "please backup the aircraft.cfg (s) [FLTSIM.xx] entri…

    • 2 replies
    • 1.1k views
  4. Started by jsg0813,

    Hello, I already own the 318/319 but when trying to purchase the 320/321 from the website there is not option for download. Only shipping. Please help is possible. Thanks, Josh

  5. Started by fisherm1953,

    I just purchased the A320/321 and it is failing on either my email or my serial. I KNOW the email is correct. and i have copied and pasted the serial from the confirmation email and the purchase webiste (simviation). I have turned off my virus protection and firewall. Thank you for any suggestions

  6. Started by Eduard Gasull,

    Hi, in the last update available, you show that some things have change for 318/319 But I can see any new version on the updater. ALso, you say that version 1.2 is set to realign with 38/19 but the last version that i see in my updater is... see the picture. Thanks!

  7. Not sure if anyone else is having this issue: D/L was a breeze so as installation. Did run the P3D and selected the A320 and did a very short test flight with custom4.abx (ready to go). After checking system stability decided to bring to 320 in par with the 319. Ex, EZDAK views, baro sets to U.S., externalpower car disconnected so I can request it and so on. Everything was working fine, but when I quit the sim and restart and selected the 319 instead of the 320 everything was reset to default. I thought that the data files are completely working separate from each other. I did see that the file setup.abx was created as soon as I started the sim and selected the airc…

  8. Started by spyderpig421,

    Checked my aerosoft folder for a318-321 pro and no updater. Under a320 folder just have a3xx configurator a3xx livery manager and documents 318 has same plus a3xx connectpro a3xx fuelplanner a3xx recorder manager.

  9. Started by spyderpig421,

    Sorry for the noob question but where do I find the update for the a320/321?

  10. Started by Bill Gradwell,

    Hello No 2D panels and really cannot find my way around - i has FSLabs version so familiar with flying these planes - but really unable to find setup menu etc - just basic menu seem missing or I just do not know where they are. Is their a manual on setup procedures or similar? Thanks Bill Gradwell

  11. Started by pablinsky13,

    Content removed

  12. Started by GaryMcCl,

    Hi. I originally bought the whole 4 professional airbus planes, and since their release I've used the a318 and the a319. Now I can see the other two aircraft released, but I don't know how to download them 2 without paying for them again (I originally bought all 4 aircraft) Where is the link to download the extra aircraft if you have already paid for them? Gaz

  13. Started by justinevans89,

    Just downloaded the a320/a321 i get into P3Dv4.3 and my aircraft texture is just white doesn't even show the engines spinning while on, any help would be great.

  14. Started by Aerosoft Team [Inactive Account],

    Unfortunately there are a few security software suits that consider the Configurator a dangerous product. This is mainly because the application contains code that alters other files (as a configurator always does). Now we have contacted all these companies and pointed out the error but as always almost none have even responded (our experiences with these companies are really atrocious). The ones that did comment refuse to change things and say the users have to accept false positives and they can not be held responsible for the damage they do to us. After the FSLabs disaster where there was serious malware purposefully inserted in an installer this is very p…

  15. Started by flying_fish,

    I bought the Airbus bundle from you on 6th August - and when I went to download the A320-A321 today I see there is no history of my orders. In reply to Querer yesterday, Mathijs suggested "Indeed, you will find a new installer for the A320/A321 on your order history page. We could not do it via the updater as it needs to write to the registry etc." I have found the link in my instant downloads, so no problem, but just wondered why my new order history is empty? BTW my old history is visible on the old download shop.

  16. Started by Anotherbusdriver,

    Hi team, I am getting the following error on installation: "The following error occured on the file ...............\FS2Crew Airbus Offer.pdf Access is denied" I seem to continue getting the same error for each file afterwards.

  17. As the title, after i installed the A320/ 321 professional i can't operate my autopilot panel anymore (actually, i can turn the knob, but there're no airspeed, HDG numbers on the panel) on A318/319/320/321. Also my parts of MCDU is not working as well, the MCDU for operate door open and close one is not showing anything on the screen, and all of MCDU just can click number's keyboard, the alphabet one is not working. The airspeed number and altitude number are not showing up on the PFD. I was buying A320 Family professional Bundle, before I installed A320/321 my A318/319 can operate normally, but after I install A320/321 later, it effect both of them.

  18. Started by canadagoose,

    Does the new release of the A320\A321 Professional (Thank You BTW) use the same Navigraph AIRAC Cycle folder as the A318\A319 Professional? The Navigraph FMS Data Manager does not include the A320\A321 Professional product at the moment. Regards, Tom

  19. Started by fahdriyami,

    I'm trying to download the A320/A321 Professional, but it is extremely slow. I have a 50mbps connection and the download is set to complete in 5 and a half hours from this server: as-asien.s3-ap-southeast-1.amazonaws.com. I'm guessing the servers are flooded and if so, is there an alternative way to download? Torrent for example? Thanks, Fahad

  20. Started by Mert Aydın,

    Hi I bought the new A321, but I can not download. Help please

  21. Started by Querer,

    Hi all, if I bought the bundle, how do I install the A320/A321? Is it a separate installer or is it sufficient to run the AS updater? Do I have to reinstall the smaller bus? Thanks for clarification, Regards Chris

  22. Started by Cyprimole,

    Hi there I know it is a busy day. I have downloaded A320 3 times now with and without AV on. When attempt extract zip getting a file corrupt file message for the .exe file. Is this because so busy with download/. Thanks a bunch....love the A319 pro!! Barry

  23. .... it is caused by a bug in Windows 10 where items are hidden when they have the same name as a item already in the start menu. Nothing we can do, it is a well documented bug that has not been solved since it was reported (as far as we know a year ago!). Keep in mind that the installed product is in two locations: Your documents folder\Aerosoft\General This location holds all the files that our aircraft products share. It is ALWAYS in the documents folder and cannot be moved. ....\Aerosoft A320-A321 professional .....\Aerosoft A318-A319 professional .....\Aerosoft A330 professional These files contain th…

  24. Started by tomwalker8,

    Have I massively screwed up here? I’ve gone and purchased the new bus, with the intention of installing it for FSX, however I can’t get it to work. I read Mathijs’ remarks in the pinned post, which reads... “In other words, you buy the P3D v4 version and get the FSX:SP2, FSX:STEAM, and P3D V3 version for free.”, and thought that I’d be able to download and install for fsx too? am I wrong?

  25. Started by PlaneGuy21,

    I just purchased Airbus Professional for P3D. However, for some reason when I proceed to install it I receive a message stating "This App Can't Run On Your PC." I don't understand why I am receiving this message?

    • 3 replies
    • 1.2k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.