Downloading and installing Latest Topics

A320 in P3Dv6 Causing CDT

Fri, 08 Nov 2024 11:57:42 +0000

I have installed the Aerosoft A320-321 Professional (for P3Dv5) in P3Dv6 using the method most everyone is using to get P3Dv5 versions of aircraft and scenery into the sim (C:\User\Name\Documents\P3Dv6 Add-ons).
The aircraft are installed and I can see them in the Vehicle Selection Menu. However, when I select one, I get a CDT. All of the other aircraft (MilViz, Project Airbus, etc.) all work just fine. It's only the Aerosoft aircraft that I'm having trouble with. It has to be something in the sim that is preventing the aircraft from loading?
Is someone having the same problem and found a solution?
I realize that the product has not been developed beyond P3Dv5, yet many users have gotten it to work in P3Dv6. Hoping to find a solution here. It's my favorite aircraft to fly.

Installing in Prepar3d 4.5

Sun, 14 Jul 2024 11:45:09 +0000

I have tried to install the A320 series and A330 into Prepar3d 4.5. During installation, the dialogue window indicated the correct folder for the sim but after installation, the aircraft are not visible. Any ideas on what the issue could be?

Thanks

Craig

A330 Installation Issues

Tue, 13 Feb 2024 12:21:06 +0000

After install and reinstall keep getting nd cfg error - cannot bring up flight book and FMC works sometimes

I had great expectation for this plane and like the a320 it turned out to be an expensive disappointment

A330 Pro and A319-321 Pro no lights visible

Sun, 28 Jan 2024 15:04:09 +0000

I know many have experienced this issue, and believe me when I say that I have tried every possible solution. Barring a support ticket, which I will do as well, I can't get any of the lights to show up; I've tried every possible solution. I have also noticed the following: In the aircraft.cfg, there's an issue with the [LIGHTS] section. Specifically, there's only one light, the VC light. I know this is an issue, but I have no idea if this can even be fixed.

This is the [LIGHTS] section of the aircraft.cfg for the A330

[LIGHTS] 
light.0                 	   	= 10, 35.71,   0.00, -0.50, fx_airbusx_vclight ,

For comparison, this is [LIGHTS] on the CS 757

[LIGHTS]
light.0=9,  67.5,  0.00,  5.0, cs757_dome
light.1=8,  13.40, -17.47,  3.40, cs757_edge
light.2=8,  13.40,  17.47,  3.40, cs757_edge
light.3=3,  69.2,  0.0,  4.4, cs757_floodlc
light.4=7,  69.2,  1.65,  4.4, cs757_floodr
light.5=1,  68.77,  0.0,  5.24, cs757_m
light.6=2,  67.2,  0.0,  4.0, cs757_floodp

Maybe I'm looking too deep into it, but shouldn't the 330 have more lights? the A319-321 all have the same entries as the 330.

P3Dv4 freeze after choosing Airbus pro(both A320 family and A330)

Mon, 18 Sep 2023 16:28:35 +0000

10 days ago I still successfully loaded A320 and completed a flight. (but it took a very long while to start loading the aircraft after I click OK at that time)

And during these days I only flew several flights with PMDG aircrafts and performed FSDT update, didn't installed any flight sim stuff.

Today I would like to fly A320, so I loaded the default F22 first.

After entering the scenarios, I selected the Vihicle option and then choose A320.

Once I click OK, the preview of aircraft blanked out and then P3D gets frozen and stops responding.

I still got the same results after I tried for many times. No matter A320 family or A330.

Then I checked the Windows event monitor, the Error events towards to P3D.exe itself, not aerosoft related file.

Does anyone know how to solve the problem? Thanks.

AS A330 for P3D V6 Feature transfer error

Fri, 01 Sep 2023 10:13:25 +0000

Hi all

Desperately need help. Getting the Feature transfer error while trying to install the a330 to P3D V6. Just downloaded P3D and it was version 6. Is the error due to the a330 built for P3D v5?

Thanks in advance

Purchased the A330 Professional P3D but cannot find it to download

Mon, 26 Jun 2023 22:07:57 +0000

Hello,

i have purchased the airbus A330 Professional for P3D v5 but i could not find the download details and serial number of the product.
Checked my email countless times but still no avail. Please help.

i only received the confirmation email that i purchased but not the product itself. i have chose digital download.

Thank you

Best regards,

Aaron

Incorrect Serial Number

Wed, 28 Dec 2022 12:32:31 +0000

Hi all,

I've bought the A330 pro off simmarket tonight and when installing the aircraft with the serial number provided it says wrong details.

Any ideas?

Livery Manager and P3d aircraft are not aligned

Fri, 30 Sep 2022 19:12:17 +0000

I install addon liveries and they show up in the livery manager but not in the simulator. I would have raised a ticket but this is also something I seem to be unable to perform.

Please help.

PS. The livery manager looks also very different from the one that is seen on the tutorials

Thank you

Sound Initialization Failed

Fri, 09 Sep 2022 10:15:01 +0000

Just purchased A320-321 Professional. Installed it and tried to run it the first time. Gives me the "Sound Initialization Failed!" error, then crashes to desktop.

Reinstalled the software itself, then also did a clean install of P3D. Running the latest version of P3D V4.5 (4.5.14.34698).

Any help appreciated!

Aerosoft A320 professional Panel integrated lights

Wed, 20 Jul 2022 16:47:16 +0000

Hello,

I have a little issue with my aerosoft product. The panel integrated lights do not turn on at night. Just the flood light does. I updated to 1.4.2.3 but I still have the same issue. Has anyone it had it before ? And if yes how was it fixed ?

Thank you

A330 Professional from Orbx | Not Installing Correctly

Tue, 30 Nov 2021 22:44:45 +0000

Hello, everyone.

I recently purchased Aerosoft's A330 Professional from Orbx Central since I saw it on discount. However, when I try installing it via Orbx, it will not install into the P3D library, rather into the Orbx Library. Many of the aircraft's features are missing, as a result. Does anybody know of a way to get the Aerosoft installer instead of the Orbx without having to purchase this again? I contacted Orbx about this, but they weren't much help at all with this situation.

Thanks again! Looking forward to the help.

installation problem

Sun, 10 Apr 2022 19:59:16 +0000

Hi! I recently bought a CD of A320 / 321 Professional I went safely to do the installation and 
the program asked me for mail and key code I put my email and the code contained in the box but it tells me 
that the mail or the code is wrong and that first I have to register my product for this I went to the Aerosoft website 
but I did not find where to register my product I tried to put it in the cart and below I put the code contained in the box I 
thought it worked but nothing does not work says code expired or not found, 
can someone help me? maybe putting me a link where to register the product in my name so I can enjoy this plane? thank you in advance

Installing A330

Wed, 02 Mar 2022 03:50:21 +0000

Hi,

Does anybody know why after just installing A330 version 1.0.5.1 in p3d4.5 it mostly does not appear for selection in SELECT VEHICLE (yep, just not there) but on rare occasions does appear?

Richard

at installing airbus all types professional the fuelplanner is not working

Thu, 27 Jan 2022 19:15:39 +0000

at prepar3dv5.3 had problem to get the fuelplanner working an at dubbelclick and start as administrator of the fuelplanner getting a message wich i fotographed ,the fuelplanner is also only seen at A318-319 its also to use with A333 i think ,hope you can help

Johannes de Jong Netherland

Aircraft Freezing After Using Fuel Planner

Sat, 29 Jan 2022 12:21:14 +0000

When I use the Fuel Planner after loading the sim, the aircraft freezes up and I can switch any buttons, etc. This started after I deleted my P3Dv5.3 config file and let the sim generate a new one. I did a complete uninstall of the aircraft (including the extra files left over), reinstalled, and it is still doing the same thing. I installed the latest update through the Updater as well.

When I select another aircraft, then go back to the A320, I get what you see in the attached screenshot.

Please advise and thank you.

Updates of A318 to A321

Sat, 22 Jan 2022 01:50:45 +0000

I was thinking of upgrading Prepar3D v5.3 Hotfix 1 Update

Can you let me know if this has an impact on the latest Aerosoft Airbus A318 to A321.? What is the latest of this aircraft - I'm worried that if I take P3D up to is latest version (I think it's higher than 1.4.3.1.?), will it have an impact on the latest version of the Aerosoft Airbuses?

Thank, Gaz

feature transfer error when installing a318 on p3d v5

Tue, 18 Jan 2022 23:12:37 +0000

Hello,

Others have reported this before, but I'm wondering if anyone has come up with a solution.

I'm trying to install the Airbus a318 Pro on P3d V5. This is the latest version, just purchased today.

I'm getting the dreaded "Feature Transfer Error" towards the end of the install.

Feature transfer error

Feature: P3DV4

Component: P3DV4_ROOT

File: \

Error: The filename, directory name, or volume label syntax is incorrect.

This is on Windows 11. I have UAC disabled.

I’ve tried installing to a different folder on my C drive, not in my documents folder. My documents folder isn’t connected to Onedrive, but it was when I initially set up my pc.

Even though I selected a different folder, it still wants to put some files in my Documents folder.

I just purchased this product, and can’t use it if I can’t install it. Every other product installs correctly on my pc. I did a Windows complete reset not long ago, so really don't want to do it again.

Any thoughts?

My A318-20 AEROSOFT PROFFESIONAL VERSION IS NOT WORKING PROPERLY HELP!!!!

Mon, 13 Dec 2021 03:52:16 +0000

Hi to everyone I am Nelson from Ecuador and I am struggling a lot I dont know what is happening the dysplay is not showing properly and I cant click any button on the MCDU... I am new on P3d V4.5 I started using fslabs but its too big and made p3d goes with lag but now I tried aerosoft and displays and autopilots are not showing correctly. I also tried installing again the simconnect. I als have intalled the fsuipc but nothing is working maybe my product is not up to date? someone can explain to me I will be so greatful. BTW here are some pics

Airbus pack no longer working.

Mon, 13 Dec 2021 07:34:09 +0000

Hi there,

My Airbus pack (318...321) does not work anymore.

Every add-on works but Airbus.

When I start P3D, I can choose a plane, but when I wish to start the sim, the plane window becomes blank.

"the loading scene window" is not on the wide, black P3D screen anymore, and when the progress bar is finished, the sim is closed immediately.

Some history:

everything was working OK
I installed Carenado C172, working OK
I installed PMDG B737, working OK. As far as I can remember, I did not try the Airbus immediately after installing B737
I made update, via Aerosoft updater

My configuration:

W10, up to date
P3DV4 4.5.14.34698
Aerosoft 1.4.3.2

Thanks for help.

Gerard

License transfer?

Tue, 23 Nov 2021 21:02:26 +0000

Hi,

I just got a new machine and will move P3D there.

Should I do anything special or just install A320 on the new PC and not use it on old one?

Cheers,

P3D shuts down after recent update 1.3.0.0

Sat, 04 Jan 2020 03:14:49 +0000

Since I updated P3D to 1.3.0.0 I can't start P3D if I select any of the Airbuses at startup. It begins to start but just disappears. If I load P3D with a different plane I can switch to the Airbus and it works fine. I did an uninstall and reinstall of 1.3.0.0.

Any help would be appreciated

Bill

Feature Transfer Error

Tue, 07 Sep 2021 22:07:42 +0000

Hi,

I am trying to install the Aerosoft Airbus Pro for P3DV5 and I am getting a Feature Transfer Error which reads;

Feature: P3DV4 (I'm not sure why as I have v5 installed and I am using an installer for v5...)

Component: P3D_ROOT

File: \

Error: The filename, directory name, or volume label syntax is incorrect

I have bought a new computer and this is literally the first thing I am trying to install. My user is an administrator and I have already tried re-installing windows. Any help would be greatly appreciated.

Cameron

uninstalling Airbus A320-321 PRO & A330 PRO from P3Dv4 to work with P3Dv5

Sat, 07 Aug 2021 12:44:40 +0000

Have both products installed in P3Dv4 (will keep P3Dv4)

Bought P3Dv5 (installed in another drive)

Can I uninstall these 2 products (working in P3Dv4) and install them in P3Dv5? Can I use the same key?

Where can I get the latest update for these products?

Tks

reinstalling last version A320, A330

Fri, 06 Aug 2021 12:51:29 +0000

Hello, with the update of P3Dv5.2 it seems that the A320 and A330 need to be updated. When I run the updater it tells me that there is a new installer for the latest a320 and A330 versions. do you have to uninstall the old versions and reinstall the new ones?