PFD, ND, ECAMS

This problem just showed up out of the blue. Loaded up an Airbus 321, started my set up for a flight and no readouts on my radio or ATC. (See attached photo), Not everything is out, the autopilot works fine, (also see attached). Anyone have a solution or experienced this before? This happened over night. (No pun intended), finished a flight session, closed down all my programs, shut down the computer for the night. Next day...."poof" Big problem. Loaded a 320, then 319, and 318, same problem. I wanted to see if other aircraft had the same problem that I have in my hanger. QualityWings 757, and RJ 70, 85, and 100 had the same thing, no radio and no autopilot di…

Topic Sorted. Thank you

Hi I recently upgraded from Windows 7 to 10 and can't see the COMM and chronometer orange fonts displayed anymore. I managed to solve another issue I was having with the ECAM, the engine circles were missing too but in Airbus configurator clicking in force ECAM software rendering solved that, but not my other fonts. Please help, thank you very much, Alex Sent from my Nexus 6 using Tapatalk

Just recently the frequency digits and ATC transponder digits are not showing. I turned up the light dimmers to no avail. Not sure if i have a switch turned off preventing me from seeing what freq i have dialed in or ATC transponder.. I reloaded the a/c with the same results. Should i delete the a/c completely and reload? It is only affecting these two items. Suggestions?? Phil

Hi my wheather doesn't work if I start in cold and dark sate. I usually use it with ASN but have not seen any wheather on the ND yet even though flying in some bad ones. I tried every possible combination on the switches but still doesn't work. If I change to take-off state it then suddenly starts working. Can anyone help to make it work even in cold and dark state? When I did my test I used manual wheather with thunderstorm settings(1,2), Starting from cold and dark and after aligning IRS(4) and changing to take-off state(5) not touched the VXR panel. Any help appreciated.

Hi Folks, I am operating FSX with my FS Sim labs airplane A320 cfm. I bought and installed actual NAVIGRAPH update for FltSimLabs to train Munich 08R. On MCDU I can select ILS 08R or 08L and get the Identfier IMSE or IMNE on the MCDU-Display. BUT the PFD only shows the related frequency - NOT the Identfier, which means no LOC and G/S Diamant will be appear on the PFD scale! So no interception of course will take place. RWY 26R and 26L works properly. Any idea?

My radio panel and squawk is not working how can i fix it ?? please help me A320 FSX WINDOWS10 thank you

Hello everyone, I was flying and out of the blue the VOR information on the PFD got crazy. Do you know what is going on? Take a look at this image.

Hello everyone, I was flying and out of the blue the VOR information on the PFD got crazy. Do you know what is going on? Take a look at this image.

Hello guys, i have a problem i don't know how to fix it. My p3d installed in 'D' drive My problem is like that 15:17:35 : ERROR :Opening file failed! Filename: 'D:\Prepar3d\NavDataPro\NavData\airports.txt' 15:17:35 : ERROR :Opening file failed! Filename: 'D:\Prepar3d\NavDataPro\NavData\navaids.txt' 15:17:35 : ERROR :Opening file failed! Filename: 'D:\Prepar3d\NavDataPro\NavData\waypoints.txt' I can't see airports, navaids, waypoints on nd panel. I delete my cfg file but still doesn't work. I'm waiting your helps

http://prntscr.com/fcha2l Using the FMGS.DLL fix, and using navigraph airac, and navigrpah is selected in the config, any idea?

hello, suddenly ND been black. It does not help turning the knob. What happened? Many of the features on MCDU2 menu is also gone

Hi, I have been successful in creating 2d panels for the displays but the ND becomes very laggy or crashes the sim. is there any workaround to get this to not happen? PFD and ECAMS work fine.

Not sure if I just never noticed this earlier. I'm in a flight as I write this and notice that my FOB has not changed since I entered the loadsheet in the Load and Fuel page. I've been in flight for over 2 hours now, and have the same amount of FOB. Is this a setting that has to be changed?

Hallo Aerosoft Team, please tell me what is the latest fmgs.dll Yesterday i make a new install A320-321 in my P3D V3. When i Change from the A320 to A321 or to a other Airplane my P3D Crash. I found that the Problem ist comming from the fmgs.dll. Then i download the fmgs.dll from the hotfix Page and install this file. The Version from the Hotfix is newer the date is older. What is at this time the currentt fmgs.dll. At this time i have no Problems with the hotfixversion. I is working. I dont know is the Problem from the fmgs.dll. ore Admin rights After i change some permisions (A…

Just a little bug I've noticed - I wouldn't even call it a nuisance, but an observation. The ECAM display pushbutton "ALL" sometimes requires more than one press to advance to the next page. I haven't been able to find any patterns regarding which status screen is displayed initially, etc. And sometimes, it seems to work perfectly fine.

I've played with a bunch of settings but I just can't seem to get my displays sharp, and it makes it hard to read the text without zooming in. Regards

ALSO POSTED ON NAVIGRAPH FORUM Hi there, Hope you are well. A couple of weeks ago, I tweeted to Navigraph and said that the LORES1P with POS transition for ILS24LY arriving into Palma de Mallorca (LEPA) didnt appear to work in Aerosoft A320. No pink dot confirming the descent profile at all. Arriving on the heading for the ILS, the aircraft turned alright but the pink diamonds for the LOC and the GS didnt appear and as I got closer to the ground, after a visual approach (due to no descent profile) the GPWS goes beserk. Its like its not expecting me to land there. FMC is all programmed correctly using correct navdata that was instal…

1 Where is the Landing Memo on the Airbus? 2 On the approach the Airbus loses vertical control on Auto land and stays at about 3000 ft. (On some flights e.g. EGLL 08R and 27L). I have checked and re-checked the Step-by Step doc many times but no help there.

Dear Aerosoft Airbus, Thanks for your help last time with navigation display. I noticed that when I descent and deploy full speed brake and idle throttle I still have an excess increase in airspeed. Normally anything beyond 2000 feet per minute will have excessive increase in airspeed any aircraft. Today i started a 1500 feet per minute descent and i still noticed in excessive amount of airspeed. Most normal descents in the simulator do not ask for a hold on altitude so the speed usually will decay in the descent with spoilers deployed and idle throttle. To complicate the matter as I extend the flaps the airspeed slightly decreases, but the airspee…

First off, I have the new steam version of the aircraft and this situation occurs with all four of them. I'd be cruising along at 31,000 ft. and all of the sudden the terrain warning goes off saying "CAUTION TERRAIN PULL UP" and the terrain display would show blips of red and yellow all over the place despite being 30 thousand feet above it. I've done the tutorial flight multiple times and it occurs with that flight too. I've also read through all of the manuals relating to the WRX/TRX and reinstalled the aircraft. Very confused. It almost seems like its detecting clouds as terrain.

I have FSX Steam edition, and the A320/21 version 1.30a installed. I dont know why is my ND zoomed. Anywan can help me? Thanks!!

Hi! I have recently purchased Aerosoft A320. I also own AS16+ASCA. However, when flying A320, though my radar is on, there is no weather shown on the radar, and a "?" was shown near the tilt angle on the ND. How can I active the radar? Thanks! 2017-3-4_1-43-20-576.bmp 2017-3-4_1-45-32-270.bmp 2017-3-4_1-47-13-829.bmp

So the other day I went to do a flight from Heathrow to Manchester in the A321, and when i entered in my flight plan into the MCDU it didn't show up on the ND. I have been getting this error message when i load up the A320 in the FSX menu screen, and after i have ended my flight. Any ideas? It has been happening with all the A320 family.