PFD, ND, ECAMS

Hello Guys, My problem is with Aerosoft A320-A321, in the middle of the flight or when I am initialing approaching the plane altitude starts going up and down and the green indicator in the PFD goes up and down like crazy and an alarm sounds. Iove these planes but now I am not able to finish a flight and its frustrating. I have windows 10 64 bit FSX Steam Edition Please help Thank you in advance Julio Marckwordt

HI folks, I'm currently using FSX:SE (Steam Edition) on Windows 8. The problem is the ECAM screens on upper and lower are blank. I've tried to install simconnect installers through the steam app folder but then I got an error message saying that there is a network error during the process of installing. Can anyone please help me to resolve this problem. Thanks

I just noticed today on the ILS approach to KMCO runway 36R (ILS ident IOJP) that the "J" character looked buggy in the little Ident/DME indication at the lower left of the PFD. So I tried it on another installation that I now only use for scenery design and noticed the same thing, and that it's actually smaller in the AirbusDisp and AirbusPFD font files on both machines. How I never noticed this before as I've flown this approach several times (not to mention others with that character) is beyond me. Since it doesn't seem to be a corruption or a bug, I'm curious what the purpose for having a smaller, almost subscript "J" is? Prevent confusion …

As shown below, the brightness for both my PFD and my ND are on full. As you can also see, the ND is off. Does anyone know what's going on? (I'm using FSX, not Steam)

Hello everyone, I have a problem with that screen, it is necessary to clear the vc hd to gain more fps, please if anyone can help me? If vc hd the simulator is slower. Original text hola a todos, tengo un problema con esa pantalla, es necesario desmarcar la casilla vc hd para ganar mas fps, por favor si alguien me puede ayudar? si marco vc hd el simulador es mas lento ------------------------- atach images

My ND and right MCDU still will not work. The simconnect did fix the ECAMs but not the ND or the Right MCDU. I have: Windows 10/64 bit FSX with SP 1 and 2 Installed Aerosoft Airbus 318/319 and 320/321 Steps I have taken: - Made sure the dimmer was as high as possible - proper power supplying the aircraft - Installed all three files of SimConnect (twice) - Reinstalled Everything as Admin - Event Viewer Recorded No Application Errors - Antivirus off/on - Click run and yes to all "run this" questions by windows - The suggestions with Windows Update - I've gone through a majority of the forum posts consisting of this issue …

I recently purchased a triple pack from Steam of Airbus 318, to 321 with RAAS tools but they unable to fly due to the fact that the ecam screens upper and lower are blank. I've reported this to Steam after unable to gain a refund, apparently too much time was spent un-installing and re-installing to try to correct the problem. Is there a fix to cure this I'm using Windows XP, quad core amd athlon 3.4MHz. regards

Hello everyone. I got a problem about my AS320. Both(T/C)(T/D)disappear from ND after I reinstall the whole P3DV3 and as320. But I still can see them in MCDU. Is anybody has the same problem with me? is there anything wrong? Please give me some advise. Thanks a lot.

So i was recently looking around the Aerosoft Airbus until there is a problem i cant fix myself, my radio stack is black on both sides and so is my transponder, i tried reinstalling it however no luck at all, i even tried reinstalling p3dv3 still nothing. Is there a problem with my guage folder or my panels.dll? Any Help will appreciated This is what i see

hello everyone , i have a problem regarding the ND. It's ZOOmed to the maximum on the both side i cannot see the route. i read before differents topics abt the problem i tried to solve it but nothing happened

Hello, just wanna let you know that I recently encountered a little bug in the radio panel. As you can see in the screenshots below, 1 of the 2 radio comms didn't work correctly. Normally you should be able to tune in frequencies like 124.950 - 124.975 - 125.000 - 125.025 .... In this case however the frequencies were all moved up 0.015 up, meaning that I could tune in freqs like 124.965 - 124.990 - 125.015 - 125.040 .... This error happened during the actual flight. In the beginning everything was correct. As I already said, only 1 of the 4 frequencies you can use in total was affected by this bug. You could also switch it over to Active and Standby. Kind…

hey guys i install some liveries for aerosoft a320 and im getting a a whole bunch of drect sound errors and and a whole bunch of errrors that keep poping up one after anotherwhen i load in fsx i cant get rid of them can some one help me msg me asap thanks

hi Aerosoft is there a way to see the speed and attitude panel when on the outside view (spot view ) for example F key or is there a way to set this up thanks martin

Greetings, I've been enjoying the Aerosoft Airbus Bundle (A318/319/320/321) for quite some time now. This evening I was going to make a flight in the A320 and the cockpit looked like this. I have not changed anything in my simulator (FSX-SE) or in Windows 10. Any advice will be GREATLY appreciated! Apologies if I've posted in the wrong forum. Scott Cebula

Good Day, Ive tried doing a VATSIM flight from Gatwick and the tower frequency ends in '220' however i cant seem to punch in the twenty part as my panel goes up in 25's... Any help? Cheers, Owen

I have installed A320 aerosoft on fsx, when I start a new flight and I want to adjust the altimeter for ex 31000 ft, it doesn't work, I hold with the mouse on button but it doesn't change, It keeps on 100, that same in speed and HDG. Someone knows how repair it?

Is there option to see what AIDS will print, but to not print that on paper just to see on computer

Seemingly on a random basis, when loading the A320 (default state cold and dark) and then firing up the systems, the lower ecam page is stuck at the flight ctrl page ( it should display the doors page) and i have to manually select the page i want to see (e. g. the engine page for engine start which should be automatically switched to when turning the ignition switch into the ign/start position). After having finished engine startup and other pre-taxi settings and having taxied for a while, the lower ecam suddenly swaps to the wheels page as it should be and from then on everything works normally. Anybody experienced this behavior? What could cause that? I have…

Hello, I am using FSX steam editon. I installed new liveries via the livery manager. Now I suddenly have the problem of blurred text in my FMC's and the above mentioned big MAP display where only the word MAP is seen in big letters. Anyone a solution for thsi? Thank you in advance Frans van Zantbeek

I loaded up the Aersoft in p3d for the first time after using it in FSX. I didnt like the performance of it on FSX so i tried it on p3d and the performance is improved greatly. However i noticed that the left MCDU, and all the other panels are not working and they stay black? The right mcdu works except i can use some of the features such as loading up the aircraft state. I tried downloading t except i already have it... Im running out of ideas and it would be a bummer if i cant fly this thing because it looks a lot of fun to fly... i cant* use some of the features on the right mcdu (Just correcting myself)

Hi there, I recently bought a new machine an reinstalled all my FS-stuff and the wonderful A320/321. For better FPS I unchecked the "force ecam software render" option in the perfomance settings, as recommended by many. But when I do, all dials/circles on the upper and lower ecam are gone. Displays are still working but parts are missing. Is there a fix for this? my specs: i7 2600k / GTX 1070 / 16Gb Ram / Win10. Running FSX with SP2 and DX10. Thanks, Stu

Hello everyone, I just loaded the new Prepar3d v4 and want to fly the beatiful Airbuses in the new 64-bit environment...but as I've installed A318/319 the ND, upper and lower ECAM, and MCDU left are blank...I've just searched the forum to find a solution but: 1) solution 1, namely go to Start-> run-> type "regedit"-> click enter, now click on Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Provider\Software Publishing all in turn. Now right click on state, then click on Modify 0x63c00 Allow only items in personal trust database (Automatically) 0x23c00 Is the default manual mode Change the value back to "23c00" …

Hello I have a small problem with my ND, my map displaying on the screen used to work fine, by that i mean zoom out to display lots of area around the aircraft, however now when i put the range to 160 and 320 they just show a small part. Also my flood lights make some textures of the buttons go funny? If you can only solve one that's fine! I know you guys work hard with the community

I have a problem with my Aerosoft a320, I bought it and at the beginning everything was fine, when I got to see the crew inside as youtubers do that they walk inside the plane with the Ctrl + enter button when they have the cabin camera Virtual, and there I have a problem because when I pass the door of the cabin, then I only see the slab of the airport, as I leave the plane and I can not see the seats and windows, I can not see the interior of the plane, any solution?

Hallo, wie kann ich den PFD auf dem Bildschirm vergrößern? Gibt es eine Tastenfunktion oder ähnliches? Wenn ich mit dem FD arbeite, ist es schon ziemlich klein in der Anzeige.