PFD, ND, ECAMS

Hi, I think I have an issue with warning messages on ECAM. "Speed brake still out" appears and disappear suddenly as it pops up (i.e. leaving speed brakes for too long in flight). As well as when I did this such of test: before take-off I moved rudder trim to full left and I pressed TO Config: I get the warning "rudder trim not ..." but it suddenly disappeared. All these warnings are almost unreadable as they disappear very quickly from Ecam display I have v1.31, Fsx sp2, on Win10.

Guys! ... Even if I set the trim correctly according to the FMGS at the time of T.O CHECK it says it is wrong .. does anyone have this problem? is usually 0.8, I set this and he understands it as wrong

Hello, I am running FSX Acceleration, with Aerosoft Airbus and PRO ATC X on Win7 64 bit I have an issue loading the flight plan generated by PRO ATC into the FMS of the Airbus. I checked the path, everything is ok, and first thing strange is that when I click ok to save on Pro Atc, it does not generate the flp file. The second strange thing, is that if I continue without loading this generated flight plan, inserting just the SID and STAR, and a few waypoints, I fly the plane, end the fllght and at that moment, the .fpl file appears in the directory, not the one I created, but the one generated by Pro Atc. Basica…

Hello Support Running p3dv5 on a 43 inch curved monitor 3480x1200. Now all the displays are stretched, With PMDG and FSL i am able to go into panel.cfg and change the window size - in most cases changing the horizontal window size to 50% of the original. Cant seem be able to do with your Airbus range Any help or what I can do Best Regards Bill Gradwell

Hello, I recently bought the aerosoft airbus A330 for Prepar3D v4/5 and now that i downloaded p3d v5, when i loaded the aircraft, i noticed that i had a major bug with the ND screen. In fact, theses ones completely zoomed resulting in only showing 1/4 of the display. Thanks for your assistance. Brandon

Hello! does anyone know why i miss that blue arrow in descent (shows where those had the altitude set). How to activate? Thanks!

I have come across what appears to be a issue with the FCU while doing pre flight startup. After going from dark and cold, and following the guidelines, I see that the FCU speed setting always shows - - - , which never changes, push or pull, managed or selected. Even after loading flights plans, downloaded from Simbrief, this display will stay stuck in this indication. After trying to get past it by taxiing and takeoff, my speeds are all over the place, and finally after many near crashes, I get it to select speed and increase with a/thr engaged to 220 or what is needed to stay flying. Not sure what is going on, just did a full uninstall and reinstall following install in…

Hi, i have this problem that I see the ND and EFB screen zoomed in... It just came after i had a crash on prepar3d v5 for VRAM usage (because of Enhanced Atmospherics) and i know that the airplane is not optimize to v5 but before that crash the airbus was working perfectly! Uninstalled and installed again but nothing... any ideas? Thanks.

I purchased and loaded the Aerosoft FSX Airbus A320/321 recently, and desire to use Navigraph as my navigation data base ( I have an account with Navigraph). I first opened the Aerosoft.Airbus.X. A320_21.Configurator.exe and set “Navigation Data Base” to “Navigraph” and then selected “Backup current settings.” I closed everything on my computer and then restarted the computer. Per online searches a Navigraph folder was supposed to be in C:/FSX/Aerosoft/Airbus Fallback. There is no “Navigraph” folder present, only the “NavDataPro” folder. I assumed that folder would be created when loading the Aerosoft Airbus FSX A320/321, but it’s not there. Another online recommend…

I recently upgraded my OS from Windows 7 64bit to Windows 10, and now I have the fonts on the ND appearing as shown: All are normal except for some ND text. Last time I had funky ND fonts, I was asked to make sure that glassga.ttf is installed. However, this time, it is. Does anyone have any thoughts as to which font is missing, or what the problem is? I could reinstall the bus, but that's a last resort I want to avoid unless there's no other clear fix.

Hi guys, Sorry for my poor english... i hope to improve my language early!! i have some problem with my Airbus 320/321. I use FSX SE with Windows 10 64 Bit... First problem.... Sometimes, when i upload the aricraft (after starting the scenary) i can't run the airplane... Second problem... the weather radar don't work on my Nd. Under the GS/TAS i see only ---/---..... Third... whe i ready to fly, in the airport base, the VOR don't work... i put in to the FMS the right information but i can't look the information... Some one can help me? Thank you for the answer...

The RNAV procedures are not working properly in my AS_AIRBUS-A318-A319_P3D. I am using the APPR button to perform the RNAV approaches. The lateral path is followed accordingly but the vertical path is always incorrect. The FINAL APP is presented properly, the aircraft follows the presented vertical path in the PFD, but the vertical path is totally incorrect, leading the aircraft always to a high approach, totally incompatible with the published approach plate. I have tried in several aerodromes, e.g. SBRJ, SBJA, SBGR etc.

Hello. Since I installed A330 professional I always have the "lights on" voice from the checklist popping up randomly at different flight stages and it does not stop. Even though when cruising at FL400 it appears all of a sudden and it does not go away which is very annoying. I have going to the chekclist and if the function "Skip Item" is available I press it but it does not go away. It is really annoying!.

Hello. I bought Aerosoft Airbus 319/320 for P3Dv3. I load the A320 in the default state - there is a sidestick symbol and the pedals are moving. After that I enter the A320 in the state of Cool & Dark. After that I switching the batteries is ON, external power is ON, ADIRS all switching to NAV, switching align IRS. After the end of the aligning, the side stick symbol on the PFD disappears and I can not go through the flight control check list, because I’m moving the side stick, but it’s not there and the pedals don’t move. Thrust is moving correctly. Auto rudder is off. Later, the symbol appears and disappears again, but the plane is controlled correctly. Is it normal…

Hello to everybody, I'm using Aerosoft A318/19/20/21 almost 2 years ago and yesterday (without installing anything new to the simulator, neither textures). As you can see at ECAM the suspensive dots are superimposed over the letters and in F/CTL page the dots have been replaced by "!". Thanks to everyone in advance!

Hi, it happened several times that I flew in a region with heavy turbolence (airplane strongly shaking) but the weather radar didn't show me. It was on, all in auto, and knob on wx+t. Dimming knob on maximum as well. Tilting manually down i was able to see the echo, so it seems working. Any thoughts about? Thanks I have v1.31, and use FSX sp2

when I wanted to start a flight, this error message appeared

Hello. Aerosoft A321 / 320.FSX. Windows 10. The T / D and T / C arrows on the Display do not appear. MCDU displays the start points for descent and set, but they are not on the display. What is the problem?

Good day. Version 1.31, Windows 10 64 bit, MFSX I will say right away - the reboot did not help, disabling the antivirus too, Steam and Origin are disabled. Removing - replacing the font (from the instructions of the forum) also did not help. How to solve this problem? Thank you in advance.

My FSX computer died (Win7) and had to purchase a new one. I now have Win10. I got a good install in FSX of the Airbus Extended but most of the overhead switches do not illuminate and do not function (including battery), the MFD and PFD displays are dark. Strangely, I can start the APU but the APU Bleed, Power, and External power switches don't function. The glareshield displays are showing data. Yes, FSX SP1 and SP2 are installed. Thanks, Dan Ward

Hey guys Hope you can help me with this ; The ND on both sides have a zoom out of this world and the MCDU both sides are very very blurry together with all the other displays Pls look at the attatched files. Thanks so much -Stian 2019-6-17_22-34-11-297.BMP 2019-6-17_22-34-21-980.BMP

VOR2 selection and ND2 indication are different. Both NDs indicates the same VOR1 selection .Is it a sim bug?

Having updated nav data base to 1906 a new one VOR wich is in the base does not working, no any indication. Can not use a new one aids in the data base at all

Hi guys, Need some help here. What does it means the dash arc in the Aerosoft A319 ND (Navigation display). Currently I am in SELECTED mode, descending to 3000ft, 1000ft/min in FCU. The blue arrow shows the spot where 3000ft is reached. Thanks

any solution for this please any fixes for it ?? Thank you so much