I'd like to know if there is any way to get ranges lower than 10nm, such as 5 and 2.5 in the ND?

Thanks in advance.

              Need help regarding blank displays on my A330 professional Aerosoft as can be shown in the image, I already started engines, APU, and turn on the knobs for PFD and ND but still I don't get display. I'm using p3d v4.5.14.xxxxx, sim connect version 4.5.0.0. and using windows 10 pro 64 bit. Anything I miss out? Simple instructions would be appreciated. Hope someone could help me fix this problem. Thank you.

I have followed the way in the thread below and successfully get a PFD&ND view; however, the fps is significantly affected. Fps is fine when the weather is also fine but when the weather gets bad (low vis, rain .etc.) the fps drops a lot.

I also followd the thread but it is for the X extended version so some lay out in the Panel.cfg is different.... Hopefully someone using Prof version has sorted out a way to have 2d ND working fine.

Just the flightpath & the items on the top right of the ND  keeps vanishing and coming back on my ND everything else is there ? This has just started out of nowhere has been working fine for months.

Airbus A320/A321 for FSX 

Windows 11 systems

everything is up to date and have uninstalled and reinstalled the bus.

Has anyone face this situatio? Sometimes starting the fly, from any state: Cold&Dark, Ready to Taxi or Turn around, the ND display just stop show any informaton and checking the logs on AB_ND_GDI.log I get the bellow entry

--------------------------------------------------------

Protocol of AB_ND_GDI.dll

company: aerosoft

file version: 1.3.0.52

--------------------------------------------------------

start time of application : Tue Aug 23 22:32:40 2022

22:32:40 : INFO :File read successfully! Airports over all = 14058, airports with runway length >= 4200 ft = 7203 (filename:'C:\Games\FSX\Aerosoft\Airbus_Fallback\Navigraph\airports.txt')
22:32:40 : INFO :File read successfully! Navaids over all = 13352, NDBs = 2655, VORs and/or DMEs = 6297 (filename:'C:\Games\FSX\Aerosoft\Airbus_Fallback\Navigraph\navaids.txt')
22:32:41 : INFO :File read successfully! Waypoints over all = 288564, found intersections = 133526 (filename:'C:\Games\FSX\Aerosoft\Airbus_Fallback\Navigraph\navaids.txt')
22:32:41 : INFO :Opening SimConnect...
22:32:41 : INFO :SimConnect opened successfull...
22:33:31 : INFO :File read successfully! Filename: 'Aerosoft\Airbus_Fallback\TerrOnND\ASDBTerrOnND.dat'
22:34:41 : ERROR :Exception (4) caught in drawNDDisplay 
22:49:06 : INFO :SimConnect closed successfull
22:49:06 : INFO :Normal termination: Application is closing now!
 

I have try unistalling Airbus Series 320/321 and install with process post on this Forum, also re installing VisualC++ libraries, turn off A/V etc.

Any ideas?

Running W10 pro X64 with FSX Sp2 boxed and Airbus Series Bundle V 1.31

Thanks in advance,

P.S when replying please explain it in an easy way because I’m not that good with computers

-Sincerely, Jayden

Hoping someone can help

regards

Brian

Hoping some can help

regards

Brian

I have found that many ECAM master cautions & master warnings like below that implemented in Airbus X 1.20 which has XML based ECAM, doesn't implemented in version 1.31

HYD Y ELEC PUMP LO PR

HYD B sys LO PR

HYD BY SYS LO PR

HYD BG SYS LO PR

I think it's not a good idea for a product to drop it's some previous system depth when release it's new versions.

Can you implement them again?

As I'm a programmer, I can help you to develop them.

Also some of your XML logic has typo problem. for example in AB_ECAM_EWD2.xml about section Overspeed, you missed ',' character so it will not trigger.

1 (> L:ECAM_CALL_15 number)

should become

1 (> L:ECAM_CALL_15, number)

I'm ready to help you to solve them & improve it's system depth.

Regards

Regards

Hans

As you can see selected track and index disagree, bird ON

I have isssues setting up the program due to MCDU and all screens Are in Cold and Dark mode. I have tried to check MCDU so I could fix it with ACFT STATE But as You can See it is impossible to choose that option. The other thing I tried is to start the Engines with Ctrl+E without Any Results at all.

I cannot start the batteries, APU or use External power.

i use FSX SE with real world weather and i use A320/321 DLC.

why i can't see the direction wind and intensity in my  ND? i can  see it only in departure and in arrival time. i can do anyting? i have attach an image

thanks you for the answer

Simone

J'ai FSX Steam sur mon ordinateur. J'ai réinstallé Aerosoft Airbus A320-321_FSX_P3D_FX Steam. Tout s'est bien passé.
mais quand je lance le logiciel et que je veux voler avec l'A320, dans l'écran du cockpit, le ND est agrandi.Sur l'autre ordinateur, avec P3D, le ND est normalement affiché.
Qu'est-ce qui se passe?
Merci d'avoir répondu.
cordialement
Jacques

is there any way to untie the Captain‘s and FO‘s PFD/ND from one another? Been enjoying CFD lately, but it’s sort of annoying that it’s all tied together.. 

examples:

TERR button is linked. If he activated it on FO, I’m getting it activated on captain too.

same with LS, CSTR (etc.), the ND Display Range..

I’d be super interested in a Solution to this. Since we can’t; for example, set one to display TERR and the other to display Weather. Or choose different display Ranges to our preference.

thank you in advance :)

I want to ask refresh rate of PFD, it is looking really low and hand flying on takeoff or landing if the weather is windy being really hard. Normally I got more than 60 fps in sim but PDF shows like I am getting 10 FPS. And also FD is really agressive sometimes or maybe due to refresh rate I can see like that. 

Is there any fix for this ? Plane is really good to fly but this refresh rate issue not enjoyable.

Thanks in advance,

Safak Caylı 

Flight is departing NZWD from default runway (no pushback) as part of a global event and extremely frustrating its appeared.

can anyone please advise.

Thanks,

GaryO

All these warnings are almost unreadable as they disappear very quickly from Ecam display

I have v1.31, Fsx sp2, on Win10.

Guys! ... Even if I set the trim correctly according to the FMGS at the time of T.O CHECK it says it is wrong .. does anyone have this problem? is usually 0.8, I set this and he understands it as wrong

I am running FSX Acceleration, with Aerosoft Airbus and PRO ATC X on Win7 64 bit

I have an issue loading the flight plan generated by PRO ATC into the FMS of the Airbus.

I checked the path, everything is ok, and first thing strange is that when I click ok to save on Pro Atc, it does not generate the flp file. 

The second strange thing, is that if I continue without loading this generated flight plan, inserting just the SID and STAR, and a few waypoints, I fly the plane, end the fllght

and at that moment, the .fpl file appears in the directory, not the one I created, but the one generated by Pro Atc. Basically it creates the file at the end of the flight, not at the beginning.

I fly also all the PMDG planes 737/777/747  no issues,  with the 787 from QualityWings, no problems either, this happens only with the Aerosoft Airbus.

Any help would be greatly appreciated !

Running p3dv5 on a 43 inch curved monitor 3480x1200.

Now all the displays are stretched,

With PMDG and FSL i am able to go into panel.cfg and change the window size - in most cases changing the horizontal window size to 50% of the original.

Cant seem be able to do with your Airbus range

Any help or what I can do 

Best Regards

Bill Gradwell

I recently bought the aerosoft airbus A330 for Prepar3D v4/5 and now that i downloaded p3d v5,

when i loaded the aircraft, i noticed that i had a major bug with the ND screen. In fact, theses ones

completely zoomed resulting in only showing 1/4 of the display. 

Thanks for your assistance.

                            Brandon