FlightFactor Aircrafts

Any information when we can download the Version 2.0.27 (July 27th 2017) ? Thanks.

Hi guys, I have a big problem, my ILS is not working for this plane since the beginning Tried many airports but its not picking up the signal, G/S, LOC doesn't seem to work at all. I have installed a IXEG classic 737 a few weeks ago, everything was working perfect with this one, picked up ILS, G/S etc..autolanding worked perfectly Last week i installed the 767-300 and on this plane ILS is not working but also on the Classic boeing it stopped working, I removed the folder of the 767 from X-plane but without success. There is no uninstall for this plane, I did reinstall the classic boeing 737 again, but still the problem remains, very frustrating t…

hey guys, i have looked everywhere and asked for help via facebook groups but no luck. Can anyone please help me to install the NAVDATA PRO to the correct folder for flight factor 767 in xplane 11? I have tried Custom data/GNS430/Navdata and xplane/aircraft/ff767/data/navdata/gns430/navdata or custom data and still no luck. Thank you

Hello! I am using 2 monitors at one PC (GTX 1070). X-plane 11 runs on 1 of these monitors in full screen mode. I would like to undock the primary flight display of the A350 and shift it to my second monitor. How can I do this? Thanks for help and regards Horst

Released today which includes support for XP11. When can we expect those of us who purchased from Aerosoft will be able to update? Sent from my iPhone using Tapatalk

Hello I bought the FF767 two days ago. I´m flying the plane in X-Plane 11 and it´s really amazing. Since today I have a problem. I can´t engage autopilot left and right. Center works, but only for LNAV and VNAV under the condition that FMS give me commands to power up or down and I have to do it manually. If I press left or right CMD button I get instantaneously the message "autopilot disc" It doesn´t matter if I´m on the ground or in the air. Also I can´t engage autothrust or speed. EEC on the top-panel is activated, AT switch on the front panel is on, checklists are ok. What do I do wrong/What wrong button did I hit by accid…

Good day, When does the Airbus A350 XWB Advanced v1.43 in aerosoft shop? Thank you .

Hallo I'm on Ubuntu 15.10 I wanted to try the Boeing Ramzzess 777 with X-Plane 11. The older releases work by night, displays seem dead at day, (light reflection?), the navigation through the inner views with the numpad doesn't work (numpad 7 for overhead view and so on). And then I downloaded the new XP11 compatible release 1.92. At start: overspeed warning and all setting on MCP at 999 or 9999. Adiru OFF. So this plane does not work, even on XP 10.52. This plane v1.83 is working fine on XP 10, so I assume I have the needed libraries. To rename the folder Proc to proc didn't help. Has anyboy an idea? Ubuntu 15.10 …

Can anyone tell me if there is a new airplane launch planned for x-plane? Will FlightFactor not launch a Boeing 737 or a 747 or a 737 max?

Dear all, I have a Problem with the update of the Navdata of the Boeing Family 777/767/757 of FF I updated all the Navdatas with the Aerosoft Tool "NavDataPro Complete". But in the FMC it´s shown that the AIRAC is out of data . In XP10 I had never an Problem with this topic. The Sim-Date/Time is the same like the System-Date/Time. Any Suggestions ? Thomas

I have recently purchased the FlightFactor 777 and when I update the Airac using NavDataPro, I can see the correct date for the Airac in the FMC but still get a message that states "NavData out of Date". Is there an issue with the syntax not being compatible? Sent from my iPhone using Tapatalk

Some time ago I bought the 757 from the download shop. I am wondering when the v2 Update will be available. Regards

I just bought AS_777, downloaded it in zipfile. Extracted it to X-Plane 10/Aircraft/Heavy Metal/777 Worldliner Professional and it's there Then I run X-Plane 10, chose it but nothing works Key wasn't asked Is there something wrong that I did? Tks

Well I have bought 3 FlightFactor aircraft... A350 B777 and the B767-300ER, (the 3 from Aerosoft.com). I am trying to install the lastest version of the B767 (1.1.20). I am using the 1.1.17, and when I try to activate the last version it says there is a error with the activation aircraft key. I have sent 2 tickets to FlightFactor and it respond that the code is ok, but the code they said me it is for the my A350, not the code from B767. I have sent two tickets and ... they answered me the same: the code XXXXXXXXXXXX (which is the one I have for the A350) is ok. But In the ticket I had put B767 and the correct key number. So.. it seems they do not read the tick…

Hi I recently purchased the Boeing 777 Worldliner Pro- Extended Pack from X-plane.org and it clearly states on the purchase page that the plane has comprehensive manuals. I just can't seem to find them anywhere in the download and no direction to them from the website. I'm probably being very stupid overlooking something simple but can anyone give me any advice where to find these manuals? I am not a pilot and one of the main reasons i chose the B777 was it's mention of 'comprehensive' manuals to help me learn as much as i can about the airliner. Thanks in advance to anyone who can help.

Hi all. Have you guys encountered an awful scratchy/glithcy sound when replaying flights with the FF 777? I've narrowed this down to the FF 777 SASL plugin. Is there any way to eliminate the sound issue for a smooth playback? FYI, all other payware aircraft replay just fine without the aforementioned sound glitches. FF 777 v1.8.1/xp10.45/win764bit/i5 4690k/GTX770/12gb ram

hello all i have recently bought the 757 and have been experiencing problems. When i do a flight and reach cruise level, the autopilot holds the selected altitude for about a minute and then it continues to climb without me telling it to and there is no way to stop it. I have tried to reinstall the aircraft and have had no luck. I follow the checklists by heart and do maintenance before every flight. thank you for your time, james

Hi all: I have read in www.xplane.com that a new version of FF Boeing 767-300 has appeared (Ver. 1.1.20). Now seems it is an updater program, which is inside the airplane, and it permit to update via a java program (X-Updater-Client.jar). I have bought the program from Aerosoft shop, Can I use that program?. When I try to use it it says there is a problem with the login or licence key.... Thanks in advance..

Hi all: I have read in www.xplane.com that a new vertsion of FF Boeing 767-300 has appeared (Ver. 1.1.20). Now seems it is an updater program, which is inside the airplane, and it permit to update via a java program (X-Updater-Client.jar). I have bought the program from Aerosoft shop, Can I use that program?. When I try to use it it says there is a problem with the login or licence key.... Thanks in advance..

Hi all: I just bought the Boeing 767 flight factor from Aerosoft, and it seems they have not the latest update. I do not know where I have to download the lasted vertsion (1.1.12).. any idea? Thanks

Hi, I have just purchased the Boeing 777 and in doing so when I go to my account and download the new plane I seem to have several options to download and don't know which one to use. I can see and discount the X-Plane 9 version which leaves me only two more to choose from. Both of which say they are for X-Plane 10, one says the date was 18th March 2016 and the other says 29th March 2016 so would assume its the latest yet that is smaller in size! Please can you help. Cheers Lee (AS_777-WORLDLINER-PROFESSIONAL_XPLANE-10.zip - 29.03.2016 08:13:00 | 482 MB) (AS_777-WOR…

When I run B777 I find that when I load the new plane it crashes X-Plane. When I force close the sim which is basically frozen I see that my PC has opened up a Zip file called getStructure.jar and has two folders in it. There is also a CMD line window open. Please help! how do I use this plane? I starting to think I need a full refund as it doesn't appear to work on my PC. here is my x-plane.log log.txt for X-Plane 10.50r3 (build 105009 64-bit) compiled on Aug 25 2016 19:51:14 X-Plane started on Sat Aug 27 10:23:14 2016 This log file is generated automatically by Laminar Research applications and contains diagnos…

Hi all: I have installed the airbus A350 XWB aircraft, and I installed the latest version. My question is if I have to install a new version, I had the 2 key files in the aircraft folder and when I installed the new version, it ask me for the activation code again.... That means I have lost one activation key? Can I just back up my 2 files key (serial.key and aircraft.key) to use again, without to enter the activation code or always I have to enter the activation code and lost one of the activation?? Thanks in advance.

Hi Just bought the 767, and I have problems with button settup. I can tune the radio freq. and some autopilot buttons with my hardware buttons, but thats almost everything I manage to control without using the mouse. So my questions is, is this how it, should be?

I just purchased the 777worldliner from the x-plane store and when I open it up it constantly gives me the over speed warning, the navigation computer, the fmc, some of the buttons/nobs, and the autopilot display wont work. The autopilot display only shows the number 9 repeatedly. Please respond if you can help me. Alex Iannuzzi