Indicating / Recording Sytems

I installed, uninstalled, tried an install as an administrator... Nothing.... After inserting all waypoints, I don't have the route on the display ! The funny thing is that if I take off and hit NAV, it intercepts and follows... But no matter what, I'm having no route displayed By the way, I have Windows 7 64 and no bugs whatsoever (except from the known ones) with the older Airbus X...

Hello! I know what this topic has already been resolved, however, there was an attached file in this forum post: in which I cannot download the Fonts.zip file. Members have reported that the Fonts.zip file worked, however, upon downloading the .zip, Windows says that the file is damaged or in an unknown format. Please help. I am running Airbus X Extended v. 1.30.

Hi, simple question but couldn't find the answer anywhere.. My flight director indicator is the one on the left. Is that even the V-symbol? I want it to be the two bars like on the right. How can I change this?

Hello. I have a really strange problem. My ice detection never show up. There's no matter what conditions are - i can fly throught clouds with very low temperatures, or stay on ground when dew point is very close to temperature. Never. It started when i switched to the ASN. I flew before with FSXWX and it's worked very well. To exclude ASN from this question, icing works in different planes e.g. Piper 180 from A2a or Dash 8 from Majestic. Do you know what can causes that? Thanks for the help.

I cannot click anything on the WXR Panel so i could not use the weather radar on my airbus series. I looked up the solutions everwhere. The only thing i have just found on the youtube was that the video about how to use weather radar on airbus x. Saying increase bright on ND, and at the bottom side, select 1 on SYS then switch the indicator to WX. However i could not do it. Everything was fine with the ND buttons on the left side but as i have said, im not able to click any button on WXR Panel neither a320 nor a321. Can anyone tell how am i going to deal with that?

Hello, After a recent problem ( reported on here ), I did reinstall FSX completely . Since reinstallation of my A320/321 Extended, I am getting a fault displaying on the upper ECAM that fuel pressure is low and that anti skid and nose wheel steering is off This fault will not clear even tho pumps are all on and as can be seen in the attached screen shot, the nose wheel / anti skid is on. On some occasions it does go off during the flight suggesting it may be to do with fuel levels. FSX runs in Windows 7 64bit. Graphic drivers are up to date Andrew

Hi everybody, question about T/C and 10000 ft indication on plan, i don't see this points, why? T/D and DECEL is normal. I read manual. 10000 ft: For example in manual video from Aerosoft part 3, on 6:15 i see magenta point on plan. T/C: on 10:03 i see the little arrow, but whatever i do i dont see this points. Only T/D and DECEL. what am I doing wrong, or is it a bug?

Hello, I use 100% of the times APU to cool down the airbus or to warm it up in cold weather. However is it possible to use external air? Is it simulated? I ask this because today I tried to use external power, but temperature in the cabin remains the same as outside... there's something that I miss. I didn't find any suggest on the manuals. How can I do?

Little error in the ECAM on the take off pahse...the automatic display of the wheel page is shown ONLY on approach phase, when the PF selected gear down...but in take off during gear up phase the paige remain in the ENG page.

Since we don't have a designated "PFD view", I would select the Main FO view and zoom in on the PFD and ND. I have a second monitor that is showing the PFD and ND only. I notice that my PFD is extremely laggy to a point that it is very difficult to fly the plane manually. My computer shows a high FPS, and I do not have any frame rate issues. Every other views are perfect. Scenery view is perfect with high FPS. But the PFD is very laggy. Please assist.

My ND display is locked on the 0 heading. I want it to follow my current heading. How do I do that?

hello, Im getting a recurring ctd and the event viewer is always saying its the "fall back panel" heres the event viewer log. - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2014-06-24T19:56:17.000000000Z" /> <EventRecordID>14570</EventRecordID> <Channel>Application</Channel> <Computer>homepc-PC</Computer> <…

everyone I have a problem because I start the plane and I normally have to wait 5 minutes and then the nd pfd screens are loaded each time but that is not so they never load anyone know how I can make those screens will be normal? Here a picture greetings matti

Hello: I can't seem to locate how to change the weights from kg to lb in airbus X extended. Thanks.

Hi Please see attached screen capture I have just purchased the Airbus, everything seems to work great apart from the ND display which only seems to display the top corner in large font. Any way to correct this? Thanks Stephen

Hi, There's incorect, because I'm at selected mode and appear managed.

Lately I've been experiencing disagreements with the altimeter settings in the aircraft. For example, I'm loading FSX basic real-world weather and the internal FSX atis is telling me to set a particular baro ref, but the aircraft will not accept that as valid for checklist purposes. Likewise, when I'm trying to fly online and pulling METARs for locations, FSX thinks those settings are wrong (dramatically so - it asked me to set 29.32 inHg earlier when the METAR said 30.06 in). Basically the only time I can get FSX and the aircraft to agree is at ISA (29.92/1013). Any ideas? Maybe I should try payware weather?

Hello, Is "TERR on ND" button implemented? Because He is active but nothing appears in ND.

Does anyone havve a fix for this? I installed v1.6 HOTFIX might that be the cause?

Hello! Since the release of AXE I observed irregularity in display of Speed Trend Arrow in some situations. Example: Cruising at FL270, IAS 310kts. At waypoint XXX the route direction changes by 45 degrees. During turn, IAS gradually drops to 300kts, but Speed Trend Arrow throughout the turn shows acceleration! Finally, I realized that the Speed Trend Arrow display is not based on changes of Indicated Air Speed, but is based on changes of Ground Speed! Not a big deal, but does not seem to be correct. Mladen EDIT: The topic title should read : "PFD - Speed Trend Arrow"

Hi, I just noticed wind direction on ND is true instead of magnetic. 246º are Indicated on the ND while 251º (mag) are shown in FS, arrow is consistent with 246º. At this position, magnetic declination is around 5º. Actually I did notice this issue on a flight yesterday where the magnetic declination is around 10º. At that time the crosswind component was from the right while looking at the ND crosswind wind component was from the left. Regards, Jose

While flying the Airbus X at cruise level, following the planned route in speed managed mode and throttle levers at Clb position I keep getting the overspeed warning going on and off. The indicated airspeed seems to settle just above the magenta marker and keeps straying into the red dots with the consequent repeated warning. This is putting me off flying this aircraft. I'm probably doing something wrong but what could it be? Any suggestions please? Iain

How do I increase size of the ND? I know I can "zoom in" by pressing space bar + mouse roll but when I do it I can not have the ND at center of the screen....any suggestion on how to do it? Any other way to do it? Thanks a lot for help

I got a issue, when im about to land I cant set my landing speed.. I've tried many times and my fmc tell me that the VAPP speed should be 139 but I can't get below 160. I didnt have these problems for a couple of days ago Does anyone know what the issue is and how i can fix it? / Kind regards Kristoffer

I just bought the AXE a few nights and noticed a problem. The lower ECAM display font is not the same as the upper one (appears to be Verdana). I saw a topic from quite some time ago that was resolved by rebooting windows. Unfortunately that's not the case for me. I made sure I have the glassga font, as well as AirbusDisp Regular, AirbusDisp2 Regular, AirbusFCU Normal, AirbusMCDUa Normal, and AirbusMCDUb Regular. Your help is appreciated! Dana Palmer KJAC