Scenery General (X-Plane 12/11)

Tonight, I flew into Paderborn for the first time. When getting close, I got this error message in X-Plane When checking log.txt in the X-Plane root folder, I found a number of warnings and error messages related to Paderborn as seen below. What I find a bit strange though is how the popup warning was referring to Custom Scenery/Aerosoft - EDLP Paderborn - City/ while the error messages in Log.txt is referring to Custom Scenery/Aerosoft - EDLP Paderborn - Airport/ WARNING: the named light airplane_beacon_rotate is actually a parameterized light. ERROR: object Custom Scenery/Aerosoft - EDLP Paderborn - Airport/Objects/EDLP_jetway_C_an…

Hello, The hold signs (eg. TULLA, NESSY, LOMAN etc) appear to be incorrect and / or missing on this scenery package... some are there, some are missing or incorrect (NESSY, TULLA, LOKKI appears twice in the correct position and also where LOMAN should be, for example). Is there any chance of it being fixed or is there an update that I have not found? My order confirmation is attached, there was no serial provided. Thank you.

I have your Airport Barcelona XP scenery since October 2020 with the 1.1 update installed when it got out. However, I have a big trouble with it: The extremely low fps during approach phases to all available landing runways excepting rwy 20 (as it not used for them). My PC specs are the next: Processor: AMD Ryzen 7 3700X Graphics card: Nvidia RTX 3070 RAM: 32 GB 3000 MHz Hard disk: 1 TB SSD NVMe Gigabyte To give an example: With the FF A320 or Zibo 737 I only reach 20 to 23 fps during the APP phase to the rwy 02 at night (with my PC its abnormal). Same happens with both 25R or 25L and 07L (day and night with this last rwy). I normally use S…

Hello Guys , I Purchased Madrid airport LEMD , for xplane11 love every thing about it , the big issue I have is very low FPS , I get 5 or 2 fps on my X-plane 11 , I'm still using 11.41 ( OGL ) Not Vulkan version because the 11.5x I have a lot of issues with it with my sceneries . my pc specs are Ram 32GB GPU RTX 2080Ti CPU i9k SSD Samsung 2TB . my Nvidia control panel options are : power management mode : optimal power threaded optimization : Auto Triple Buffering : off Vsync : use 3d application settings ( On ) I bought a lot of sceneries from Aerosoft never had …

Hello, Is there a fix or a trick to get rid of those ugly default buildings mixed with my payware EHAM scenery? Thanks, Arthur Vince

Hi all! I recently purchased the new LTFM airport and in game it works just fine. However, when I try to install the new navdata that's provided in the ''NAVDATA_AIRAC_2104'' folder, XP11 gives me the following error message: I did the installation as per the manual, by copying the ''Custom Data'' folder into XP11's main directory. I have no other navdata files installed. Does anyone know what's causing this issue? Thanks

Hi I have bought toulouse airport for my X-Plane 11. I have some problems to install the airport (DVD) with the message bellow "The installer cannot run in this UI mode. To specify the interface mode, use the i-command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI Console, and Silent" I do not understand what I have to do to install my airport Thank you for your kind help

I recently bought Dublin V2 scenery for Xplane 11 version 11.55 and installed the scenery into the custom scenery folder but when i load the airport in the sim i get the message "No static tdg some files are missing" i enclose a screenshot of the x plane and a screenshot of the airport with no buildings at all i also have a screenshot of my custom scenery folder, have i done something wrong in the installation ? any advice would be most appreciated. Thank you

Like many other flight simmers ...all wondering about the plans for updating EIDW Dublin V2 to reflect the new RW addition of 28R and upgraded taxiway signage? Can an interim patch be made at least for taxiway signage?.. as this is very outdated. Very eager to see the fantastic current X plane V2 rendition be updated. One of my fav Euro airports. Thanks

Dear Aerosoft Developers, I am a user of Xplane. I am very thankful for your scenery LEMD. It is very good but has a big issue because I cannot combine it with SpainUHD. SpainUHD is a central element of my flights in Spain and LEMD is the central airport, could be both combined? May I kindly ask you to allow during the installation include the possibility of using SpainUHD? Thanks and best regards!

Hi all Today I bought the SCEL stage for my X plane 11, but when I open it I get a stage error, I would appreciate it if you can support it, I attach my log file. 0: 01: 09.282 E / SCN: Custom Scenery / SCEL New Intl Airpot 2020 / OBJECTS / TERMINAL / Terminal_Light_03.obj: 738: 0: 01: 09.282 E / SCN: LIGHTS 5 1 is out of range; OBJ file is bad. 0: 01: 09.282 E / SYS: MACIBM_alert: There was a problem loading the scenario package: 0: 01: 09.282 E / SYS: MACIBM_alert: Custom Scenery / SCEL New Intl Airpot 2020 / 0: 01: 09.282 E / SYS: MACIBM_alert: The scenario might not be displayed correctly. 0: 01: 09.282 E / SYS: MACIBM_alert: Please check the L…

Hello, I have installed Aerosoft's LEBL scenery but the airport scenery is not showing (can't see terminal buildings, taxiways etc). I can see that some buildings of the city of BCN are loaded... Can anyone help me troubleshoot this? I'm a new Xplane 11 user, and I've been trying to find for a solution for a few days now. Atached log.txt file. Thanks! Log.txt

Hello, in the addon Berlin Brandenburg V2 (v2.00) for X-Plane 11 there is a small bug. Some objects (like e.g. the government terminal) are only displayed with very high object density settings in the X-Plane 11 menu - Settings - Graphics. We have fixed this (thanks to FlyAgi) with a small hotfix. You can download it here. Unzip the file and copy the two folders "Earth nav data" and "OPTIONS" into the installed Airport folder. Limesim - EDDB Berlin Brandenburg - 01 - Airport (make a backup from this folder before if you want). Overwrite or replace files. In the next bigger EDDB V2 update the HotFix1 will be included.…

I've downloaded many UHD files from X-Plane that were authored by Alpilotx.net but I’m having a problem keeping the UHD folders above HD folders in the scenery.ini file. Despite saving the scenery.ini file each time I change it, the HD file keeps appearing above the UHD folder listing in the file. Any suggestions as to how to stop this changing; perhaps altering the file name of the UHD folder, or the HD one? Regards. TG (UK), X-Plane 11.55

Hi. I've recently downloaded & installed Malaga for X-Plane 11 Everything looks fine except there is no moving ground services traffic or cars on nearby roads. I've attached my Log and would appreciate any help. I've got SAM 2 installed and that works fine with other sceneries. Many thanks .... Log.txt

Hi, I purchased EHAM a couple of days ago but I'm getting a 'problem loading' warning at every start up. I've attached the log but I'm not smarty enough to sort it myself! Also in the stock laminar EHAM there was a little moving ground traffic, but there's nothing at all with this paid version. the airport looks lifeless - can I fix this? Thanks in advance, Steve Log.txt

Hello, This morning, I bought Split scenery from Aerosoft (through Steam). However, as shown in the pictures, I do not get the result that I want. I also included a picture of my scenery library. First I thought the problem was me not having SAM Seasons. After installing SAM Seasons and reinstalling the scenery, I still got the same negative result. Finally, I have to mention that I have no other Croatian scenery installed and I do not have any other European mesh. I hope someone can work this out with me! Kind regards, Lennert

After installing custom scenery for KDAB, I get the following message on start-up of X-Plane 11.55r2: "There was a problem loading the scenery package. Custom Scenery/Aerosoft - KDAB Daytona/ The Scenery may not look correct Please see the Log.txt file script for detailed error information below: In the log.txt file, I found the following: Warning for missing scenery file: +30-081 Warning for missing scenery file: +30-080 The most obvious visual observation is that taxiway edge lights appear to float in the air and obscure taxiways and runways mostly at intersections. Also, there is is no longer an option to begin a fl…

My newly purchased KSRW Scenery works great except for an annoying flickering on and off of service vehicles such as baggage carts, tugs, etc. I tried changing the graphics settings but that didn’t work. I am using X-Plane 11.55. Windows 10. Any help would be appreciated.

I've got a problem with the Ibiza scenery regarding the Orthos and Overlays. I bought Ibiza a while ago and thought the airport looked fantastic but wasn't impressed with the Ortho & Overlays. It appears that everything including the ortho, overlays and airport are all in one single folder, where as it is quite common for most devs to include their orthos, overlays & airport in seperate folders. Is there a work around or a fix where i can use just the airport along with Ortho4XP or Orbx?

First: Great scenery! Really happy to see this for X-Plane !! However: These lights in real life are omnidirectional (visible from all directions). In X-Plane they are not (seems the vis range is 180 degree). I guess this issue is because this airport is based upon Alta X for P3D (same issue in P3D) In X-Plane there is no problem to change the light-type to a light that are omni-directional (and also visible in daytime). (I use the LIGHT_NAMED SW_bb) Any plans to include this in a future update ? Edit: If you are comfortable with text editiding, you can open the following file: ..\Custom Scenery\Aerosoft - ENAT Alta - 02 - A…

Yesterday I bought your LTFM scenery which looks great although the airport seems to have no custom mesh. Is this right? Thanks in advance.

Hello, I bought this scenery via the X-Plane.org store but the manual states support can be asked on this forum so I hope that is okay. One "issue" I noticed is that according to Navigraph simlink I'm not correctly aligned with the taxiway according to the navdata but I am on the scenery. Betterpushback saves previously used pushbacks at gates you were at before and it also confirms this as my previous pushbacks are not aligned with the taxiways on the scenery. (they were before with the well known freeware version). Either way not a huge problem it's still roughly accurate but if it could be fixed that would be nice. The second issue i…

After looking around for a while I discovered some signs which shouldn't be there. You can see them in the pictures I have attached. All other signs at the terminal stands are looking good.

I downloaded KDAB airport from x-plane.org store. Once I start the game it says There was a problem loading the scenery package: Custom Scenery/Aerosoft -KDAB Daytona/ The scenery may not look correct. Please see the Log.txt file for detailed error information And here is my Log.txt I am struggling with this error for a whole day. Thank you so much for your help!! 0:00:26.157 I/SND: This aircraft is using FMOD in PARTIAL mode. 0:00:26.157 I/FLT: Init dat_p0 type:loc_ram apt:KDAB start at:SheltAir Aviation Services (05) 0:00:28.177 I/DSF: Warning for missing scenery file: +30-081 0:00:28.177 I/DSF…