Scenery General (X-Plane 12/11)

Hi All, I went back to X-plane after a little pause and after few flights I realized that the Terminal E building windows were not transparent anymore (meaning you can't see in the building) but inside you still have the seats etc. On the main building I still have transparency. And I saw on the trailer video from aerosoft that there is in fact transparency for terminal E Any thoughts on what may happened ? Attached two picrures to illustrate the problem. Thanks in advance for your help Basile

Hi Guys, I have noticed recently at Manchester that my lighting at the airport is really dark/non existent at night.. I looked on the website and I don't think this is correct? Would someone please be able to assist? I can hardly see the aircraft which is such a shame... Regards,

Was looking inside the terminal near stand 5 and i noticed white seats .... seems they didn't texture the interior and it looks bad when parked on stand. someone didn't check this in testing.... please fix thanks

Hi, just made a flight from EDFF (Aerosoft) to EGCC (Aerosoft). There were no Apron lights at EGCC, only the runway, taxiway and airport building lights were lit. Additionally there were very few static aircraft compared to EDDF. by the way: At BIKF (Aerosoft) I have no static aircraft at all. Settings maxed out with Flyagi. Everything (lights, static aircraft) was fine at EDDF. Any ideas? Best Regards Thomas

Hi guys, I have installed the Extended Night Landing and the X-Europe but I get always an error after launching Xplane that it doesnt work. Could you please tell me if the order is ok? 30.12.2021 17:54 <DIR> EXT_new-york_lights 30.12.2021 17:54 <DIR> EXT_north-carolina_lights 30.12.2021 17:54 <DIR> EXT_north-dakota_lights 25.02.2019 14:09 <DIR> EXT_norway_lights 30.12.2021 17:54 <DIR> EXT_ohio_lights 30.12.2021 17:54 <DIR> EXT_oklahoma_lights 30.12.2021 17:54 <DIR> EXT_oregon_lights 30.12.2021 17:54 <DIR…

Question. For years I have dreaded this product because when using it I booted off of VATSIM for having low fps on final/short final. I also noticed that anytime I focus specifically on the main terminal buildings whether in the plane or outside of the plane my FPS drops from 40+ to 17 - 19. I have a very high end system and have yet to come with a reason for the drop. I love the scenery, especially since I live near KDFW, however I just cannot get beyond this huge problem with the low FPS around the main terminal. It is important to note that it only happens around the main terminal building, my FPS is great when looking at ANY other part of the airport. I have disabled …

Hi I just was taking a look around Stuttgart airport and I found a lot of things wrong from issues with the windows from the inside of the terminal to the whole inside of the terminal not aligned correctly and floating objects i have attached a few screenshots. Log.txt

Hello everybody, Recently I changed from P3Dv5 to XP11 and I am quite happy with it. Unfortunately at my home aiport (Zurich, LSZH) the used runways for departure and arrivals are not really the ones used in reality (takeoffs at RWY16 [mainly Heavies from Terminal E] and RWY28 (shorthaul and midhaul aircrafts from Terminal A und B) and landings usually on RWY 14 and sometimes on RWY28. RWY32 is never used for landing and rarely for takeoff. RWY34 is often used in the early morning for landing and in the late evening for takeoff due to noise abatement restrictions in Southern Germany. RWY10 is also rarely in use. I know that most likely it's difficu…

Hi i recently purchased Orbx TE south spain but with my Malaga scenery i am getting default buildings showing through the scenery any ideas on a fix for this

Hi there I just bought Malaga airport scenery. When I try open it , it keeps saying I am missing a file. I checked the original download folders and it doesn't have this file either. Maybe I am doing something wrong since I am new to X plane Thanks in advance for any help IMG_2297.HEIC

Hi guys! Hope you all are doing well? First, thanks for making Norwegian airports in X-plane happen. Been using them for years for both XP and P3D, and I love that Aerosoft is doing so much for our small country in the north. Thanks! I have an issue when using Ortho from ZonePhoto and loading Aerosoft ENBR Bergen 1.03. It takes from 12-14 minutes to load. I can live with this issues without any problems, but it only happens in Bergen and when used together with ZonePhoto. Usual loading time for a tile with ZonePhoto and a custom airport is about 1-2 minutes. ZonePhoto with ENGM takes 1.40min, so I'm scratching my head wondering what the issue might be. …

I just purchased from The Org. On the splash page there (as well as the Aerosoft market) and also in the included documentation it states "Includes the older Schoenfeld (SXF) airport (north of BER) with the same level of detail" and that this package "includes two configs to switch betwen SXF and BER operation." Maybe I'm blind, because in no place in the included documentation does it state how to achieve this. Maybe I'm also stupid since I appear unable figure this out, despite having searched the XP forums and these forums, and there's nothing there. So... how does one switch between BER/SXF with this scenery?

EDDT is in X-Plane but the frequencies that appear in the documentation do not work for ILS (I checked both sides of both runways). Is there a fix for this?

Hey, I'm doing something wrong right? I mean I know it is not supposed to look like that. So any advice would be helpful and by the way, this is my first time commenting like this if I am doing something wrong pls tell

HI, I have just bought the new scenery LIMC Milano Malpensa but when I start the game I have an error message and the airport doesn't load. Attached my log file. Help appreciated. Thank you. X.plane 11.40b9 Log.txt

X-Plane 2021.10.30 - 18.49.18.01.mp4 Getting some really weird flickering of the terminal in Chania for X-Plane. Almost looks as if there are two of the same object overlapping.

Hi, i just bought Madrid LEMD scenery from X-Plane Store, but when i try to install patch for ortho4xp, then there is nothing in the folder.

Hi guys, with the latest 1.03 update posted today the scenery no longer accurately represents the airport at all. There are plenty of missing assets including whole terminal buildings which are no longer contained in the scenery, just the jetways. The previous version had an additional folder (cant remember the name) but now there is only one so I'm just wondering has there been an error with the upload. I'll attach a few screenshots when I get the chance. Thanks. EDIT: Screenshots to show the issue including a major FPS issue that wasn't present in the previous version.

Hi. I've just purchased the above airport via Orbx Central. This states that this is "a brand new version for xPlane" and has "updated taxiways and parking positions" As can be seen from my attachments this is obviously not the case as the area highlighted bares little resemblance to the actual parking stand numbers on the current Jeppesen plate. It would appear that stands that don't exist are included and some that do exist are excluded. Someone on the Orbx forum commented that this might be a compounded error from when Aerosoft made the original scenery in 2016 but I've checked an old Jeppesen plate dated 13th May 2016 and the parking positions don't ma…

Hello, the World Editor file included in the scenery actually has taxi routes, but they are not enabled. Can you provide an update where these are enabled please?

I've been having a bit of a problem with the installation of the LDSP scenery. Airport buildings and traffic are ok but the runway and the ramp aren't there (see screenshot). The scenery is at the top of the scenery_packs.ini file so shouldn't be having a problem with overlays lower down the file. Any help to fix this would be appreciated as it's driving me mad. Thanks in advance.... scenery_packs.ini

I'm trying to download the latest update from my account Instant downloads. The only link is an Aerosoft One *.zip wich only relates to an Aerosoft One *.exe. I wil not at present state use Aerosoft One, so I need a direct download link - wich is not present ...

Hi! Launching X-Plane 11 with Custom Scenery\Aerosoft - EDDS Stuttgart_3_Scenery\earth nav data\apt.dat generates the following warning in the x-plane 11 log.txt: [AOS] [2021-10-03.08:59:58] Loading airport data from apt file and generating cache D:\X-Plane 11\Custom Scenery\Aerosoft - EDDS Stuttgart_3_Scenery\Earth nav data\apt.dat [AOS] [2021-10-03.08:59:58] WARN: Something went wrong while trying to generate cache for apt file D:\X-Plane 11\Custom Scenery\Aerosoft - EDDS Stuttgart_3_Scenery\Earth nav data\apt.dat with error: invalid stoul argument Does anyone of you know, what that means? Full log.txt as attached file. Thanks and regards Horst …

I bought aerosoft egll for XP11 yesterday The gate does not work. Autogate 1.72 is already installed I've also tried changing .dsf files name of the Earth Nav data folder, but the gate doesn't work. please review thank you

Tonight, I flew into Paderborn for the first time. When getting close, I got this error message in X-Plane When checking log.txt in the X-Plane root folder, I found a number of warnings and error messages related to Paderborn as seen below. What I find a bit strange though is how the popup warning was referring to Custom Scenery/Aerosoft - EDLP Paderborn - City/ while the error messages in Log.txt is referring to Custom Scenery/Aerosoft - EDLP Paderborn - Airport/ WARNING: the named light airplane_beacon_rotate is actually a parameterized light. ERROR: object Custom Scenery/Aerosoft - EDLP Paderborn - Airport/Objects/EDLP_jetway_C_an…