Scenery General (X-Plane 12/11)

Hello, I have problems with Cologne airport. I think that is xEurope because I had the same problems with Malaga XP but a file from aerosoft helped.

As the support advised me, I open a topic on this subject. i have just bought aerosoft Madrid LEMD by thinking that the assignations of the runways in use by ATC was like in the real airport (according to official charts). But sadly this is not implemented in this scenery. inn the real airport, depending on weather in LEMD you can Take off : either in 36L/36R or in 14L/14R -> but not 18L/R & 32L/R. for the landing : either 32L/32R or 18L/R -> but not 36L/R & 14L/R I think that the runway configuration is implemented in the "apt.dat" file from the scenery but it's way too much complicated and abstract for me and i'm to …

Downloading from the Aerosoft store I received this file (see below). It is not an executable and I cant determine the file extension. What am I supposed to do with this?

Hi, Recently I bought Split Airport DLC from Steam for Xplane 11, I took a look on a documentation and it said they must be 4 scenery folders but I have only 3 (that is Split 00 01 02 ) The missing one is mesh. Also (probably) because of it Airport "floats" (this is how it looks). Is there anything way to download manually scenery?

Hi! Some time ago I bought Bergamo XP from XPlane.Org Store; is the new version supposed to be released on that store too with an upgrade option? Thanks.

I've got problems with my Malaga XP bought from Steam. Some buildings are under jetways. Here are photos of my version and how it should look. scenery_packs.ini

I am interested in Airport Frankfurt V2 XP What appears to be the same product is currently on sale on the Orbx website Can anyone confirm if these products are identical please?

Hi, I have just bought Aerosft LEMD airport scenery. I have installed the two directories "Aerosoft LEMD Madrid - 01 Airport" and "Aerosoft LEMD Madrid - 02 Mesh" in X-Plane custom scenery folder as instructed in the installation manual. However, when I start X-Plane I have these error (part of the log follows): --------------------------------------------------------------------------------- "0:02:17.519 E/SCN: Failed to find resource 'SAM_Library/dockings/Honeywell-PA3_5.0m_pole.agp', referenced from scenery package 'Custom Scenery/Aerosoft - LEMD Madrid - 01 - Airport/'. 0:02:17.519 E/SCN: Custom Scenery/Aerosoft - LEMD Madrid - 01 - Airport/…

Hello, I know that it is known that your EHAM airport has no SAM functionality. Which is a pity because I think it is the best I can find now. There I a very extensive one here https://forums.x-plane.org/index.php?/files/file/55042-eham-schiphol-amsterdam/. But of course this is a bit much, I do not like the crane so much, and even worse, you lose the Schiphol standard gates as they are. And they are replaced by standard SAM gates that have no Rabobank or ING billboards on them. Also you lose the gate number signages, which are all present in your Aerosoft EHAM airport. I think you airport has a nice detail level, size and also I lik…

Hello folks! I recently bought the Bergen Airport Scenery for X-Plane 11. As a person who flies quiet a lot to the airport I was very disappointed to see that the T3 (New terminal) is not included in the scenery, but only as a construction site. After completion, the new T3 terminal serves the airport's domnetic routes, while the older T2 serves the international marked. The fact that i cannot use T3 makes flying domnesticlly out/in to the airport unrealitic as i am unable to use the proper terminal. I know this is not an issue to many people, but to me as a person who often is around and using the airport in RL, it would be very nice to be able to use the new T3 in the s…

Hello. I have carefully followed the instructions posted below but I cannot get the airport EGLL to load properly. XP complains about a missing file and none of the buildings show up at the airport. I have the scenery in the following order at the top of my scenery packs ini file:- SCENERY_PACK Custom Scenery/_DefaultStreets_London-Heathrow/ SCENERY_PACK Custom Scenery/Aerosoft-EGLL-Airport-London-Heathrow/ SCENERY_PACK_DISABLED Custom Scenery/Aerosoft - EGLL Heathrow/ I am not using the static aircraft but I would like to get the safedocks working. I attach the log.txt file for your attention. I renamed the two +51.001.dsf and +51.…

Dear Aerosoft. I would like to open a discussion about the flattening issue regarding Malaga XP by sim-wings. First an illustration of the issue at hand. As you can see the airport flattening "1302 flatten 1" ruins the mountain due west of the airport. This is not how 30 Euro scenery should look like. If you remove the 1302 flatten 1 from the apt.dat file the mesh is corrected as seen here, thereby and flattening issue mostly caused by the DSF mesh (I suspect). But since the the objects are made with Sketchup or at least converted with it, they gets elevated in air some places. This however can be fixed …

Just purchased EGLL. I do not see animated traffic on aprons. Is there some configuration that must be done to get this to work.

Hi there, The 07/25 parallel runways in LEBL have changed to 06/24. Can you provide an update to your scenery to reflect this? Thank you. IM

Hello there! I have a very powerfull PC (i9 with 5,0 Ghz and RTX 3080Ti) and can run XP11 with stable 30 fps (Vsync) even in very heavy environment (e.g. Orbx Washington, DD Seattle Airport, xEnviro on high settings, objects on high setting etc.) but with those two sceneries (Stuttgart and Kassel) I barely reach 30 fps. At least the fps are not stable. I know about 2k textures for Stuttgart (I'm talking about the new version of course!) and I'm using them already but is there another way to increase performance? Maybe by switching off 3d grass or something? Compared to other airports, like Seattle or Los Angeles in combination with Orbx, Stuttgart an…

Hello, Recently I bought the Aerosoft LEMD for X-Plane. The scenery itself looks very nice indeed, but the performance is horrible. I use Spain UHD, and no matter whether I have it on or off I still suffer with the fps. Tried disabling/removing the custom mesh but didn't achieve any improvement unfortunately. Kind regards, Daniel

Hello, I'm trying to generate an ortho tile for my newly purchased LSGG, but I can't seem to apply the patch. Whenever I try, it results in floating buildings. I found another topic about this in the German section of the forum (where the creator responded in English) and tried to follow those directions, but I still can't get it to work. I've tried generating 2 tiles from 2 different sources just to be safe but it didn't make a difference. Here's what I've tried/what I'm doing: I verified that the patch is installed in my Ortho4XP folder properly. It is right where it should be: F:\Ortho4XP v1.3\Patches\+40+000\+46+006\LSGG W…

Greetings everyone, I have most recent version of EDDF scenery on XPlane 11. Noticed today that Stand S601 is not correctly depicted off of Taxiway S16. Instead, it is off S14. FRA has a different layout (see Jeppesen/Navigraph). May I please suggest to get an update of the scenery, to take into account the Stand changes and alterations on Taxiway designators on the scenery. I checked on XPlane.org store and the version I have installed is the same as in the store. Other than that, it is my most favorite scenery. Sometimes I just hover around to enjoy it. Really awesome work.

Hello there! I saw right now the problem was reported already some time ago: Sorry, but after paying 30 € for an airport this is unacceptable! The problem is not mentioned in the product description, no where. Also no screenshot (looks like you intentionally hide it). Could the developer be so kind and offer a fix for that? Thanks a lot! Cheers, Matt

Hi just a question, I noticed that there might be an update to the Mega Airport Amsterdam scenery for X-plane 11. I have purchased it via steam and it's in desperate need of an update, since a previous update of X-plane itself there are ridges in the taxiways Alpha and Bravo, which is the main taxiway, which has become unusable. I'd love to hear how to update this great airport. Thanks. Rico

Hi all, I have both the above scenery. When I spawn in or land at the two airports, I can never get the gates docked to me. How can I fix this? Thanks.

I recently bought Bali for xplane from Aerosoft , when i spawned , the jetways wasnt / werent working , any solutions?

Greetings: I bought Zurich v2 for X-Plane nearly a year ago, and I am only now noticing that there is absolutely no ground traffic movement. I also noticed that the user manual that came with the download does not match the actual download. The folder names are different, and I do not have an Aerosoft LSZH Airport plugin, as mentioned in the manual. I bought the airport off the X-Plane.org store, I am running X-Plane 11.5 with Visual Effects at Max, Texture Quality set to high, and also Number of World Objects at Max. Any assistance would be greatly appreciated. Thank you!

Hello, I am trying to install the default scenery for X-Plane 11 for Windows 10 with the installer and the operating system doesnt recognise any DVD whatsoever so I am trying to manually install all of the files and put them in my X-Plane 11 directory, When I go into a random airport it says it is missing a .dsf file (for example +50-010.dsf) and when I go into Desktop/XPLANE11/X-Plane 11/Global Scenery/X-Plane 11 Global Scenery/Earth nav data, I can see the folder "+50-010.dsf" when I did the manual scenery install and somehow it says it isn't installed, Any help on manually installing scenery?

Is this a known issue, or something I am doing incorrectly? It is the same for all aircraft and positions.