Scenery General (X-Plane 12/11)
648 topics in this forum
-
Dear virtual pilots, I just bought my first Aerosoft product but it does not work. I bought the Amsterdam Scenery (MAC version) but the file is damaged. I downloaded it five times from both the servers but the file is still corrupt. Can anybody help me? Does this happen often? Regards, JW
-
I have got Airport Amsterdam on DVD but when I try to install it I get the following error message: Installer User Interface Mode Not Supported. The installer cannot run this UI mode. To specify the interface mode use the i-command-line option followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console and Silent. I am running Windows 8.1 with X-Plane 10.31 Any ideas? Neil
-
Hi there. I bought aerosoft Zurich-airport scenery for X-Plane10. The installer says my serialcode is wrong.... any ideas what can I do? Best wishes vinouma
-
Hi, I just bought and downloaded the Amsterdam scenery for X-Plane and it turns out to contain only the Windows version. So how do I install this scenery on my Mac? I cannot find a Mac version anywhere on your site, or something stating that this scenery is only for Windows... Thanks for your support! Regards.
-
Hi! I have this broplem that i did not uninstall Aerosoft Keflavik XP first but instead removed whole x-plane and just need directions how to remove old registry key from windos regstry bec. it won´t let me reinstall it and message is what this says that: update old installation and don´t let me reinstall! So.... Can anyone help me out how it can be solved? tare1974
-
Hello. Unable to load the PANC Airports. Scenery PANC appears for 3 seconds and then X-plane crashes. In Log.txt at the end of this writing: 0:00:16.422 I/FLT: Init p0 type:loc_ram apt:PANC rwy:07R 0:00:16.422 I/SCN: DSF load time: 12405402 for file Custom Scenery/zzz_hd_global_scenery2/Earth nav data/+60-160/+60-151.dsf (831383 tris) 0:00:16.422 I/SCN: DSF load time: 8531660 for file Custom Scenery/zzz_hd_global_scenery2/Earth nav data/+60-150/+60-150.dsf (787527 tris) 0:00:16.422 I/SCN: DSF load time: 5356477 for file Custom Scenery/zzz_hd_global_scenery2/Earth nav data/+60-150/+60-149.dsf (739933 tris) 0:00:16.422 I/SCN: DSF load time: 2671839 for file Custom Sc…
-
- 22 replies
- 4.2k views
-
-
Hi I have downloaded the above via steam and it says successfully installed. When I go to the airports I can't find it. Can anyone advise please
-
Hi My boxed St. Gallen Altenrhein has arrived today, and I have installed it but when I am taking off from runway 28 (or overflying) runway 10 I get a Crash To Finder always. I have installed some add ons in that area (simHeaven photorealistic sceneries, OSM Europe) and some plugins, so I have deleted ALL that sceneries from the Custom Scenery folder and I have disabled ALL plugins without results... is this a known problem? what can I do to fly this scenery? Thank you
-
I just bought the US Cities X Los Angeles and when I fly, I see patches of water over what should be land. It changes to ground when I fly over it or near it, but what can I do to eliminate the water patches?
-
- 0 replies
- 849 views
-
-
Hello flight simmers, I need an answer to a problem I have with AIpilotx's hd mesh scenery v2 and also his xp10 trees and farms v2. The 2 files are in the Custom scenery folder but the 'tree lines and farms v2' is sitting below hd mesh scenery v2' and as this file is supposed to be above hd mesh scenery v2 in the file list I need to know how to move' trees and farms' up the file ladder. My system is running Windows 8.1 and I am not a wizard at delving into the depths of a program file system, if there is a simple fix for this I am sure someone on the forum knows the answer. Update: Oooops! I think I know where I went wrong,just never had to rearrange files before.
-
- 6 replies
- 3.9k views
-
-
hello i just bought your lszh scenery pack, and i have "lego" buildings conflicting with buildings from your scenery. i understand this is because there are exclusion zones for facade elements missing. are you going to add those and fix the problem? (tried myself but after 3.5 hours of trying to figure things out i lost atis frequencies and probably other things and i've no idea why)
-
Finally got to fly around EIDW in XP10. I notice compared to the FSX Version, Pigeon House / Poolbeg Power Station on the River Liffey at Dublin Port is missing from the XPlane version. Will this be updated?
-
- 0 replies
- 882 views
-
-
Can only be a joke, just install the scenario in Europe, after more than three hours waiting, I opened the game and everything was out there when I returned and the scene was gone, I went into additional content and where it seemed he was no longer installed. I think I screwed up was better to have bought the dvds.
-
Hi, I have just purchased Dusseldorf for Plane 10 but every time I attempt to install the airport I receive a message advising it has been corrupted and should be moved to the bin. I am currently running OS-X Yosemite beta software and all other scenery has installed without any problem. Can you please assist? Thanks
-
After renaming the +53-007.dsf.grass file to +53-007.dsf, (replacing the original) loading the scenery results in numerous errors saying that the file, EDDL_gr.dds, could not be found. That appears to be because that file was renamed EIDW_gr.dds (which makes sense) but all references to it have not been changed to point to the renamed file. (which is an obvious mistake) Consequently, the ground is covered in small x-shaped objects with no textures. I didn't have time to chase down all of the references so I duplicated the file EIDW_gr.dds and renamed the duplicate to EDDL_gr.dds. That resolves the problem but I strongly recommend fixing the download. I appreciate …
-
Excited to get this, bought this morning, have the serial number, installer won't run. Checked forum, found topic about installer, tried deleting the java file as it said, still will not run. Frustrated now as want to install and start flying....
-
- 13 replies
- 2.5k views
-
-
Hello, I purchased the boxed version of airport Zurich and when the installer asks for my serial, it says it incorrect. The serial starts with MAZ-.. and I've tried different ways of entering the serial. Could anyone help me, please? :-)
-
Hello, Yesterday I purchased LSZH Zurich Aerosoft from X-plane.org (I am on X-plane on MAC). I installed it, used serial number. Installation went fine. When I launch X-plane, I don't see any buildings! I tried to do what was explained in another post (but with LSZH instead of LSZA) and still nothing has changed. do you have the actual X-Plane 10 (10.25 or 10.30 Beta)? If not, please update with this installer/updater: http://www.x-plane.c...taller-updater/ And you have downloaded the Lugano Scenery v1.11? Than the buildings shall appear. After the installation, there are two entries in the Custom Scenery folder: Aerosoft - LSZA Lugano Airport/ Aero…
-
hello all pilots. I recement for purchasing the scene, lugano aerosoft xplane 10 MAC. My problem is that when j'nstalle the stage I don't see any texture at batiments.I had someone aerosoft who told me to re install this addon and I still have the same problem. I specify that I have a IMAC 27 '3'5GHz NVIDIA GEFORCE GTX80 M 4GB. Til someone the same problem? how to install the stage. thank you.
-
The Amsterdam scenery looks stunning, but I fly on VATSIM so was wondering if there was a way of turning off the dummy aircraft so they don't clash with VATSIM aircraft?
-
- 0 replies
- 922 views
-
-
I downloaded the Zurich scenery for X-plane and the installer will not run. When I click on it, I receive a message the "Airport Zurich is damaged and can't be opened." I'm running an iMac w/ OSX 10.9.2 and X-plane 10.30 (beta).
-
Hello, we are working on further developement of the AS-Sky Tools Free. For example: Perfomance improvements, new Sky Themes.... If you have ideas, please post it here. What features would you like to have.... ? Greets Heinz
-
- 1 reply
- 1.1k views
-
-
Hi, I have X-Plane 10 Global (purchased from Aerosoft) and it's patched to the latest version. I run it on a Linux desktop machine (Linux Mint). It's been running perfectly fine with custom aircraft and scenery add-ons already installed. Recently, I have been trying to install extra scenery from the installation DVD's but when prompted to load DVD 2, even though I do so, and can see it mounted on my desktop, the install program will not continue (does nothing if I click continue). I have been using the latest version of the install program which I downloaded from the X-Plane.com website but it makes no difference. Any suggestions?
-
- 0 replies
- 827 views
-
-
Desperatley looking for LHBP scenery for plane 10. If somebody has it, please share it with me. Thanks
-
- 0 replies
- 1.5k views
-
-
No update on the previously closed topic from 2012. I am new to this forum, is this the norm when one would expect news on a major airport update?
-
- 3 replies
- 2.7k views
-