Skip to content

Scenery General (X-Plane 12/11)

  1. Checking out the 2.06 update, all in all it looks really nice but one thing I've noticed is how there are a number of lights that are either misplaced or of wrong type. This mainly seems to be an issue at runway intersections/entries/exits. Below are a couple of examples. There might be more that I missed. B1 - should be closer to the grass edge or changed to the sunken into ground type of lights B9 - Same thing E3 - Same thing H1 - Quite scary if this would be IRL. Especially considering this is a high speed exit and one of the most commonly used at Zurich H2 -…

  2. Started by Davihhh,

    Moin, eine Frage zum o.g. Szenery Pack; dieses läuft unter Xplane11 leider nicht bei mir. Also der Flughafen wird nicht dargestellt. Neuinstallation hat nicht den erwünschten Erfolg gebracht. In der Text Datei Szenerie.ini sieht aber alles nach der richtigen Reihenfolge aus.... Wer kann helfen...???

  3. Started by WebMaximus,

    Thanks for the update of the Zurich scenery! One thing though, when you make a setup UI, please make it work correctly with scaling on 4K displays in Windows 10. This is what it looked like over here. Also, the UI reported the version of the scenery as 2.0.0 even when I downloaded version 2.0.6. I was previously on 2.0.5.

  4. Started by dino172,

    Hello, I just bought Dublin V2 for Xplane 11. I have a bunch of ryanair aircraft in a line look's like there are parked in the grass. Just wandering if anyone else has seen this? Dino

    • 0 replies
    • 987 views
  5. I have just got the EGLL Scenery from aersoft and one of the hangars is floating. I have the London VFR scenery and ortho tiles in this area Can any help?

  6. Started by DaveHagen,

    Hello, sorry if this is in a wrong forum, but I've recently bought the Aerosoft EHAM for X Plane 11, now I have a few problems, first one is that whenever I connect to VATSIM the sim crashes within a minute. There are no other gates than only C10 and C11 for example, C14 and others are not there, when in replay on a real world spotting place at EHAM when behind a fence the aircraft dissapears magically, and when having autogate and SAM suite plugin it doesn't do anything at all at EHAM https://www.aerosoft.com/en/flight-simulation/xplane-11/sceneries/547/airport-amsterdam

  7. Hi There, I have a issue with my LSGG scenary with Xplane 11 (Steam Version). 1) After installing the LSGG scenario I get the following Custom Scenery structure (Scenery_packs.ini) which I believe is correct, no ? ( I also did put the Log file in attachment) 2) At airpoprt selection screen Xplane 11 classifies the LSGG airport as "Helipad" and no longer as "3D" 3) When selecting this airport and launching the scenario, I get a freeze more or less in the middle of the progress bar ("Finishing asynchronous loading") and then the game crashes Hope you can help since already uninstalled the whole Xplane 11 and reinstalled it twice…

  8. Started by DMullert,

    Hello Team. I am having an issue with KDFW's ground textures on my XPlane-11 installation. I have attached an image for reference. Any ideas how to correct the problem? Many Thanks. Dennis

    • 5 replies
    • 1.7k views
  9. Hello everyone, I was having some issues with how to install this scenery and I don't understand what they mean when they say xplane root folder and unpacking scenery folders. please help! much appreciated .

  10. Started by WebMaximus,

    The Malaga scenery is supposed to have SAM jetways but today when I flew into Malaga in the Zibo mod and parked at gate 45, the jetway didn't attach to the aircraft. I also noticed how I had the small circled 'A' icon in the upper, left part of the screen. Even when I've configured SAM to never display the jetway status in the SAM settings. Not sure if this indicates something is wrong with my installation (I've seen the same issue at other airports as well) or if it's caused by the scenery and a faulty SAM config for the scenery? This is what it looks like when I'm parked at gate 45 in Malaga And this is the SAM settings s…

  11. Started by olddreamer,

    Hello, I just purchased the Malaga Airport for xplane 11. I cannot install the airport correctly. I think I have followed the instructions correctly but unfortunately I have not succeeded. I have searched through various forums and nothing. What am I doing wrong?. PS: I send you screenshots if you can help me. Thanks in advance. ¡Google translator!

  12. Started by mitchromley,

    Just curious if there are any plans for a v2 type update for the Aerosoft KDFW scenery? It's starting to look rather dated against what's coming out these days, it'd be nice to see such a major airport in the US brought up to current standards.

  13. Started by SpeedbirdSimulation,

    Hello just purchased amsterdam via Steam, upon loading in, i am always getting same error and also noticed only a few gates are available here is from log.txt 0:02:17.820 I/SCN: DSF load time: 796237 for file Global Scenery/X-Plane 11 Global Scenery/Earth nav data/+50+000/+53+006.dsf (145554 tris, 11 skipped for -14.4 m^2) 0:02:17.820 I/SCN: DSF load time: 533769 for file Custom Scenery/Global Airports/Earth nav data/+50+000/+51+004.dsf (0 tris, 0 skipped for 0.0 m^2) 0:02:17.820 I/SCN: DSF load time: 585586 for file Custom Scenery/Global Airports/Earth nav data/+50+000/+51+006.dsf (0 tris, 0 skipped for 0.0 m^2) 0:02:17.820 I/SCN: DSF load …

  14. Started by Carlos Roig,

    Hello friends, I bought recently Malaga airport, and installed properly. When loaded the scenery there is a blue square with the letter A in white colour on the top left corner of my window. What is that exactly? I thought it was a kind of menu, but if I click nothing happens. Attached you can see the picture. Thanks for replies! Take care.

  15. Started by pilot arnoud,

    i follewed the steps Installation 1// Purchase and download the latest version of Aerosoft's Schiphol Amsterdam 2// Unzip 3// The folders wich are needed you can find in Aerosoft - EHAM Schiphol Amsterdam -> custom objects 4// Copy following folders "EHAM" , "grounddraped" and "vtg" into the main folder of the new Schiphol Airport 5// Purchase and download "ALES - The Airport Layout Enhancement Solution" by Pyreegue 6// Unzip 7// Copy "ALES LIB" folder into the Schiphol Amsterdam main folder 8// Copy the new Schiphol Amsterdam Airport folder into X-Plane 11 / Custom Scenery …

  16. Hi I`ve bought EDDN on xplane.org.store - but first time I have problem with aerosoft scenery : "0:01:14.754 E/SCN: Unable to load draped polygon file 'I:\Custom Scenery part 2\Captain7 - 29Palms - EDDN Nuremberg 2/orthos/Detail/Spring/EDDN_apr_ground+18k+4k.pol'. 0:01:14.754 E/SCN: 0:02:28.378 E/SYS: +------------------------------------------------------------------------------- 0:02:28.378 E/SYS: | Error loading the scenery package: I:\Custom Scenery part 2\Captain7 - 29Palms - EDDN Nuremberg 2/ 0:02:28.378 E/SYS: | X-Plane cannot run with this package installed. You may need to remove the custom scenery package. 0:02:28.378 E/SYS: | See t…

  17. Started by Jude,

    Thank you,Aerosoft for the EGCC gift (yes I know "gift" is the German for poison, but not in this case I had this product for XP10,but not XP11 Danke

  18. Started by GaboBaa,

    Hello, First of all, thanks for making Manchester free for the community! Awesome airport. I'm facing a problem. If it's daytime, everything works perfectly. When the terminal lights come on, I drop from 50+ FPS to 28. I tried with the same plane on another airport and this doesn't happen. Any ideas? Thanks once again, Gabriel B

    • 0 replies
    • 800 views
  19. Hi, i have got the limited time free EGCC Manchester airport , now... when i run it together with OpenSceneryX , it actually shows me missing textures , so i checked the log: 0:01:17.662 E/SCN: Failed to find resource 'apt_asphalt', referenced from file 'Custom Scenery/Aerosoft - EGCC Manchester/ground/ The file is indeed missing in the mentioned path.... May i know where can i het the missing resource ? Thanks

  20. Started by mike81,

    I would like to download the EDDT V1.03 update from the X-Plane.org store, It still has the older version. How long can I expect before I can download the updated version? Thanks, Mike.

  21. I've just bought the scenery and preparing for my first flight noticed that the sign for exits DB and L (both sides of the RWY35L) has DB duplicated while L is missing. Also there is a No Entry sign for L, while it seems that according to the chart, L is pretty legitimate way to vacate RWY35L.

    • 0 replies
    • 972 views
  22. Hello, I just purchased the Malaga Airport for xplane 11, however when I install the product and load up my simulator it states terrain fie not there and gives me the ortho tile co ordinates for malaga, am I missing something important in the installation? Also where do you install the scenery because from the manual given it states install it into your xplane 11 root folder but then another person says install it into your custom scenery, any help would be greatly apprehciated. Thankyou. sorry about image, the error state as follows Error, could not locate file for terrain Custom Scenery/zOrtho4xp +36-005/terrain/25520_32016_BI16.ter Cus…

  23. Started by Duke748,

    Hi Could this road bridge on the west side of the airport be fixed in a future version of the airport scenery? It needs a ramp on the right hand side in the screenshot similar to the one already in place on the left hand side. Vehicles currently descend\climb it vertically which looks very odd.

  24. https://store.x-plane.org/FlyTampa-Copenhagen-XP_p_1217.html

    • 0 replies
    • 727 views
  25. Started by Fabrice77,

    Hello All, I have a mesh issue with LSGG: 1. Gates 1 and 2 are not flat. Front gear is lower that rear gear. (see Gate 1-2 file attached. 2. The area between the Arena and the WTC is a mess. (see Arena file attached) 3. The cargo area is not flat (see cargo file attached 4. Taxiway A is bumpy, as if it was grass/earth instead of concrete. Part of the INNER taxiway, near the round satellite is the same. I tried everything, including full reinstallation, but cannot find a solution. This is happening with both standard or Ortho4XP mesh. With a standard or freeware airport, this is not happening as well. Does anyone have the same …

    • 0 replies
    • 798 views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.