Airport Enhancement Services
Support for AES
3377 topics in this forum
-
Hello, attached the first screenshot of AES 1.96 in MAF 2008. As you can see, the third upperdeck Jetway is full animated at the A380.
-
- 22 replies
- 6.9k views
-
-
hello all, I'm using fs9 running on windows vista. I've fnished the installation of AES but every time I load AES help.exe it gives me the error: aes has detected a scenery.cfg in the virtual store, this can generate scenerie problems. and indeed there are problems, aes can't connect with my fs. someone who knows what my problem is? grtz, Christophe
-
- 1 reply
- 1.6k views
-
-
-
Oliver, I hate taking you away from development work, but I have an issue. I have a new system that sadly comes with vista installed. When I start up aes, I get a screen that says: aes has detected a SCENERY.CONFIG in the virtual store! This can generate problems with the scenery. I push ok, and it goes away. When I try to add airports, including free ones, I get: add-on scenery not found or not active. Please install or activate in the scenery library first. I installed, and activated all my add-ons (e.g. limc) and cannot get the credits to work. I checked kord, egll, and they work just fine with no problems. P.S. I am using fs9.1, and aes as administrators, as this …
-
- 4 replies
- 3.4k views
-
-
I get annoyed when airport traffic hits my plane during pushback or while crossing a taxiway, therefore I propose a new idea. It is called a proximity factor The objective of the proximity factor is to cause airport trucks and vehicles to stop moving when an aircraft is on a taxiway or apron. It works like this imagine an invisible circle around your aircraft that expands with the planes speed imagine another circle around the user aircraft that remains constant. with 10ft clearance around the wings, engines and fuselage the first one is active all the time. When the aircraft is not moving the circle is gone the second remains on when the aircraft is moving un…
-
- 2 replies
- 2k views
-
-
Currently, AES only supports the user aircraft. Is it possible to allow AES to takr over AI aircrafts in the airport during pushback. Currently the MS pushback consists of a short invisible tow half way from the gate, then a 360 turn around. I have noticed that during this, the wings sometimes come into contact with ground vehicles. I also find it annoying to see aircrafts come out from the gate nose first when taxing along a terminal area with gates. I was wondering if there was a way AES could take over the aircraft for the entire pushback and also allow traffic to watch out for aircrafts... I am contacting some major Traffic program specialists in order to see wha…
-
- 1 reply
- 1.7k views
-
-
Today i bought Bergen Airport from FSCloud9 for FS9. You can only download version 1.01 at www.fscloud9.com I've installed, payed and activated that version but when i want to assign credits to ENBR i got a banner withe the message that i need as minumum version 1.01 of Cloud9 Bergen. For AES i use version 1.95a. I couldn't find anything about this problem here, but i've no idea what i've done wrong. I hope someone has the solution...... Regards, Ad Ording The Netherlands
-
- 9 replies
- 3.8k views
-
-
I have installed FSQuality Slovenia at AES the airport is recognised as installed. I have activated Ljubljana and LDZA airport but when I am going to the airport the AES menu does not appear, also no marshaller no vehicles. I have also tryied the 0 credits airports of Slovenia an dgetting the same problem. I tryied to go to FSQUALITY web site but I am getting an error message. Any ideas? Chris
-
- 4 replies
- 3k views
-
-
Hi After I'd install EDDF 2008 my aes can't find EDDF as active now what? Kind regards Frank
-
- 6 replies
- 2.4k views
-
-
What does this mean? Look at the attached picture. How do I fix it? Thanks in advance. cdog New_Bitmap_Image.bmp
-
- 1 reply
- 1.8k views
-
-
I just tried flying the JustFlight/PSS Concorde from EGLL+AES. It seems that this a/c doesn't like AES - is there a known issue? Things are OK until pushback, (though I get the same problem when I choose F8, to align the a/c exactly at the gate), I get lots of smoke and bumping (screenshot) and when I am asked to reset parking brakes, as soon as the statement "towing equipment is removed" is heard (presumably when FS comes out of slew mode) the a/c suddenly shoots off forward, or rolls on its side, or similar. If I replace the Concorde with some other a/c, things go fine. Also, there is no problem with Concorde if I use Rob Barendregt's Groundhandling gauge (AVSIM) for …
-
- 4 replies
- 3.1k views
-
-
Hi there. I have earlier this year stated that i had some problems when gomming to the gates when at an AES airport. Yesterday i made a COMPLETE reinstall of OS (XP64) and FS2004. I then made a complete (or somewhat) install of addons (scenery, planes). Strange enough, the problem still persisted. SO my plan now is to make a incremental install (FS2004, and then AES with one credit pack). I will then try and locate the problem. I Have this strange feeling that it is caused by some strange .bgl file from some planes. Will keep you posted Michael
-
- 4 replies
- 2.1k views
-
-
Hi Oliver, I was just wondering if at the very least you were able to get in contact with LKPR people. I tried contacting them but never a reply so maybe you have same problem. I have some credits left over and want to at least get an idea if I should use them for other senerys I have. I know not to post requests here but no update for quite some time. It is one of my favoriate airports and would love to have it for AES!! Or perhaps Aerosoft will do a Praha Ruzyne senery when Lipzig is complete !!!! hint hint!! Thanks!
-
- 1 reply
- 1.9k views
-
-
Hello Oliver, Could you kindly let us know if you have any plans to complete IS's Nassau? As I said in a previous post that you may not have seen; after reading that you had not received the scenery I contacted IS and asked them about their intentions. I received a quick reply stating they had sent the scenery to you, and they weren't sure why you had not included it in your work. I'll offer again to contact them on your behalf as there seems to be a miscommunication. But, only if you would like to include an AES option with the scenery. I don't wish to pester you about this, but I didn't see any mention of it on the new update. It would be a shame to not have the com…
-
- 2 replies
- 1.7k views
-
-
Another GREAT work: EDDF2008!!! I bought it and im using the Fs2004 version. In the Manual i read that AES ver 1.96 is needed and in fact, with version 1.95a is impossible to activate this airport. A "question" : have we hopes to get the new version soon? I cant wait to have this excellent airport fully operative ( without AES i consider and airport "not operative") Thank you again for your work, folks........... Stefano building an home cockpit www.ottavian.com
-
- 1 reply
- 1.6k views
-
-
I have very recently installed AES and purchased two serial numbers, having now 3 credits left. My question is: as I may have to install a clean version of FS9, as I am having some problems with incompatible sceneries, will I be able to reuse the airports to which I have already assigned AES? Will the AES help tool "remember" what installed before? Regards, Domingos
-
- 4 replies
- 1.9k views
-
-
Hi, With some (mostly German) airports initially an AES Light version is part of the scenery package. When activating the full AES features for those airports, should the AES Light version manually be disabled in the scenery.cfg? Please advice.
-
- 2 replies
- 1.6k views
-
-
Hi, Can AES crew simulate this in version 2.0? http://www.airliners.net/photo/Japan-Airli...-446/0307662/L/
-
- 1 reply
- 1.8k views
-
-
Hey, I did recently buy aes and I really like it, but when I start from an airport with aes with and cold and dark airplane some of my buttons are frozen, I can't activate the generators and some buttons don't move, but when I go to an airport without aes it works perfect, anyone else havening this problem?, it's only on the 737 series. // Johnny
-
- 6 replies
- 3k views
-
-
Alo everybody. First want to thank aerosoft for the AES and for Lisbon airport. Using the AES at Lisbon with the PSS airbus, everytime I finished the pushback the plane crashes. Sometimes happens also in madeira islands. Does anybody has this problem? how can I solve it, because its pretty annoying, specially when using FSpax because the flight finishe's. Apprecciate your help thak you. Paulo Batista
-
- 2 replies
- 1.6k views
-
-
Well, it seems that AES has somehow deactivated itself from both my ORD and LHR airports. And those are just the airports I've tried. On the runway, I do still get the "centerline" sounds. And when I hit Cntrl-Shift-W, I get the menu to call a "follow me" car. But, that's where it all ends. I cannot get any other function to activate. When sitting at the gate, hitting Cntrl-Shift-W does nothing. No menus pop up at all. Any ideas? Many thanks!
-
- 1 reply
- 1.5k views
-
-
Oliver, Sorry to bother you with this annoying question. I know myself how irritating it is when people keep asking: when? Always the best answer is: when it's ready. But I'm dying to fly to AESed Sochi and Novosibirsk. And it's been more than a month since your last status update. So I dare to ask: can we expect AES 1.96 soon? Sorry again, I couldn't resist... (shy) Best regards, Rafal
-
Oliver, Just wondering if you had a timetable in mind for the next AES update, specifically with KATL in it? Thanks.
-
- 2 replies
- 1.9k views
-
-
Is there a reason why KLAX and KDCA never made it to AES drawing room?? Doug
-
- 4 replies
- 2.1k views
-
-
Ummmmmmm......Is Oliver on a well deserved vacation? I haven't seen a post by him in awhile now. Usually he's everywhere at once. Okay. Oliver, when you get back, I'm here wheedling again. ImagineSim is just about to release their new scenery for Atlanta. Sometime in May, they say. I expect it will be on a par, if not superior, to their other products which have been delightful. So, of course, the question is: when will AES make it even better?? Is that planned....I didn't see anything in the update at the top there. Only took a week after FSDT popped KORD out the door.
-
- 33 replies
- 11.6k views
-