Do have a question/request, however. From the previews it looks like there won't be any auto step climb option. This little QoL feature was lacking in the XP version and it's kind of a shame to see it might be in MSFS as well. I understand it's not 'realistic' but neither is Pause at TOD or sim rate, and it might not be necessary to safely complete a long flight but it would be satisfying for any of us who can't spend a long-haul entirely at the PC and would like to replicate an sop which is standard in the real world. So I just wanted to put it out there as a possible option for what's shaping up to be a good addition to the sim.

Cheers!

well after getting 1 flight which was only a quick circuit my a340 throttles dont know how to work.

I have just uininstalled and updated the software to 1.0.1 A from the aero one app and once again my setting for the joystick are non existant. The efb does not see throttles 3 an 4 of my bravo throttle quadrant and my reverse thrust throttles seem to think they are part throttles 3 and 4

hopefully SIMWARE sees this post and can offer some advice or it will be another ticket

I had a great flight with it yesterday, but today I just can't get it to load into FS2024. I just get the spinning wheel at the lower right corner of the World Map/Free Flight screen and it just loads indefinitely.

I've had it a few times with this aircraft before but I could Esc out of it and try again and it'd normally load the second try. This time it's not working at all though, and I've tried different airports just to be sure.

Any ideas?

Thanks

I own the bravo throttle quadrant that Aerosoft also supplies the config software for. But when it comes to working with one of their own products its useless ie the A340 a 4 engine jet that does NOT work with a hardware device that has 4 throttles. I made a post here earlier regarding this but had very little success in finding a solution. I therefore decided to raise a ticket. After 4 days of no reply to the ticket ,day 5 showed the ticket as solved. No how or why just closed.

I noticed there is an update which i've downloaded and installed after uninstalling the old version, It's made zero difference the loading of the aircraft is still hit or miss and my throttles do not work in any way shape or form.

I really hope someone from aerosoft admin reads this post and can explain to me why you just close a ticket for no reason and why the honeycomb config software does not work with one of aerosoft's products

Thank you

Oh before I forget another Question. Everytime I spam at a Gate the second door on the left and the first Cargo Door are open. Any solution or mus we wait for an Update?

Cheers

I run a VA website which used phpvms to power it, the associated Acars tracking software is logging what looks to be a possible bug with this software.
The aircraft/MS2024 simulator is reporting false pauses several times per second throughout the flight as well as engine on off.
The user had a 24 meg log from his flight something that is normally in the region of 20-50k.
The website Laravel log built up to 189 gig and had to be deleted because of its size, again normally in the kilobyte size.
As an aside we saw similar problem with a competitors software which they fixed recently.

A sample from the Acars log for you: (only a few lines from the 24 meg)

D:0322 16:20:36 Total pause time calculated, start was "2026-03-22T14:40:50.0411161+00:00", ending "2026-03-22T16:20:36.2425500+00:00", diff=01h 39m 46s

D:0322 16:20:36 Total pause time calculated, start was "2026-03-22T14:40:50.0411161+00:00", ending "2026-03-22T16:20:36.3967354+00:00", diff=01h 39m 46s

D:0322 16:20:36 Total pause time calculated, start was "2026-03-22T14:40:50.0411161+00:00", ending "2026-03-22T16:20:36.5373779+00:00", diff=01h 39m 46s

D:0322 16:20:36 Total pause time calculated, start was "2026-03-22T14:40:50.0411161+00:00", ending "2026-03-22T16:20:36.7111212+00:00", diff=01h 39m 46s

D:0322 16:20:36 Total pause time calculated, start was "2026-03-22T14:40:50.0411161+00:00", ending "2026-03-22T16:20:36.8364922+00:00", diff=01h 39m 46s

D:0322 16:20:37 Total pause time calculated, start was "2026-03-22T14:40:50.0411161+00:00", ending "2026-03-22T16:20:37.1363834+00:00", diff=01h 39m 47s

D:0322 16:20:37 Total pause time calculated, start was "2026-03-22T14:40:50.0411161+00:00", ending "2026-03-22T16:20:37.2859013+00:00", diff=01h 39m 47s

D:0322 16:20:37 Total pause time calculated, start was "2026-03-22T14:40:50.0411161+00:00", ending "2026-03-22T16:20:37.4367112+00:00", diff=01h 39m 47s

I have banned the use of our Acars software by users of this add-on for now. I will point out that PMDG also had this issue with some of the addons and recently resolved it.

All the best

Doug Johnson Cyber Air

I've seen the latest Aerosoft A340-600 overhead panel preview, and I'm impressed with it.

There's just one small piece of detail that I would like to point out here.

The Inner Tank Split markings should not have letters L and R. Instead the A340-600 has numbers 2 and 3 displayed above each guarded push button, which is what the Toliss A340-600 in XP12 has marked up.

Other than that everything else is fine.

This Image is the IRL A340-600 Overhead Panel.

This Image is of the Toliss A340-600 Overhead Panel.

And yes, I have followed instructions

Please, are there any solutions

What's the status of the A340-600? is there a non-discord public place or thread we can follow updates? It was said release would be by Christmas, and then early 2026 & that Friday updates would be consistent, but none of this has occurred. is it still progressing or?

Cheers

Any news concerning Aerosoft Mega Airport Ben Gurion by David Rosenfeld , compatible with msfs2024 ?

Please note we are unable to answer all the requests and also unable to create all your stuff but this is the place to post :-)!

I own a copy of 2020.

How do I install it in 2024 ?

Via aerosoft one ? Is there a free upgrade ?

Couldn’t fond any mention of it.

Ty.

thanks

christian

I would like to know if there is a method to load a flight plan into the GNS 430/530 Garmin.

I tried different options but none of those work.

Thanks very much.

I spotted something on the overhead panel that I wanted to share with the developers. The areas highlighted in yellow represent the minor points.

I have also provided an IRL image for reference.

Starting from the left side of the overhead panel:

• The Inner Tank Split should display 2 and 3 above each guarded push button switch instead of L and R. L and R markings are found on the A330-200/300 and A340-200/300 variants, but the A340-500/600 variants have got 2 and 3 markings above each push button switch.
• Land Recovery push button ON light should be white.
• EVAC Command push button ON light should be white.
• Emergency Generator FAULT light should be red.
• EMER Calls push button ON light should be white.

On the FUEL Panel:

• The OUTR TK XFR guard should be black.

On the ELEC Panel:

• External Power B push button should display AUTO.

On the AIR Panel:

• The RAM Air push button ON light should be white.
• The Ditching push button ON light should be white.

On the Exterior Lights Panel:

• The RWY Turn Off lights should have RWY Turn Off & Camera markings, because the aircraft has taxi camera lights so the crew can use the taxi camera at night time.

On the right side of the overhead panel:

• The Landscape Camera push button should display a white OFF light.
• Some of the lights on RMP3 didn't light up when the ANN light selector is in TEST position.
• The Amber SEL light on RMP3 is missing.
• The guarded FWD & AFT Discharge push buttons should display DISCH instead of SQIB.

That’s all I have for recommended corrections on the A340-600 Overhead Panel. Please copy or save this for reference. I understand that this is still a work in progress, but I hope this is useful feedback for the development team.

I started recently to fly the CRJ 700. 

Following all procedures, while starting the engine 2, the oil pressure never increases and the engine 2 doesn’t starts.

No problems with the engine 1.

Could someone help me?

Thank you

Claudio

I just wanted to know if there is any update for X-Plane 12 planned for this great scenery which already dates back from 2017.

Adding moving jetways would already be a good move forward.

Thank you for your reaction.