Aerosoft Scenery

Hi there, It says on the website that version 2.0.1.0 can be installed via ASUpdater, However running ASUpdater i don't get prompted with an update for GCLP. Still shows 2.0.0.0. Am i missing something? It would be good to figure out a way to get the update to fix the floating issue.

Is there a patch for aeorosft bali x to work in v5? I have the product but not sure if it will work w/o the patch.

Hello, I can not save a ticket via https://support.thefsps.com/ .It comes an error. Has anybody contact to the devolper? Best Michael

Hi all, I was wondering as stated in the title; Why is THESSALONIKI X V2 FSX P3D not available in the Aerosoft shop, but it is on SimMarket? If I buy it from simMarket for P3Dv5, will it work? The simMarket shows in the requirements "P3D 1-4". Thanks for any advice!

Hi, I keep getting an error message 'Airport Controller crashed with code:2 Exception details : Airport Recognition data corrupted!' I have been told it could be linked to Aerosoft scenery but i literally haven't a clue how to reolve whatever this is ? Any help would be greatly appreciated ! Thanks Martin Littlemore

Hello, I installed Berlin Brandenburg for v5 (V2000). Then I tried to install the ORBX Patcher, and when pressing next, it gives me the error: "Error: Please install the Addon - Mega Airport Berlin Brandenburg Professional- first" Even though the product is installed. Is there anything to fix this?

I've just discovered the main east/west runways at Barcelona - LEBL - have had their designations changed last Thursday. They are now 24R / 06L and 24L / 06R. 02/20 is unchanged. The heading for the ILSs are unchanged this is copied from a avsim post. will simwings LEBL be updated ?

Hi guys, just installed Milan Malpensa Professional V5 for p3dv5, version 2.0.0.0 and also updated at 2.0.0.1. I have some issues. I see double jetways when i activate SODE-ON batch file and red crosses on runways 17L-35R and 35L (i don't know why only 35L and 17R is ok). Searching on log file of SODE i see this: INFO SODE.FSLOOP : + SimObject 'DRS_limc:Limc_aproach35r' [12bPilot_SODE_MissingObj]. ID: 25 INFO SODE.FSLOOP : + SimObject 'DRS_limc:Limc_aproach35l' [12bPilot_SODE_MissingObj]. ID: 26 INFO SODE.FSLOOP : + SimObject 'DRS_limc:Limc_aproach17l' [12bPilot_SODE_MissingObj]. ID: 27 INFO SODE.FSLOOP : + SimObject 'DRS_limc:limc_grass' [12bPilot_SODE_Mis…

With respect to the (3) scenery entries do they go above 'Orbx Global Base' entries or below or does it not matter?

I understand there are no plans to update NUUK Greenland past v4. Just wondering if anyone has tried it in v5 with any success? Thanks.

Hello I purchased the v2 ENVA scenery for P3Dv5 and landed but fell through runway onto lower runway below it? I do not have Orbx Norway installed. Config is correct and scenery layer is correct ENVA is highest in list... scenery is latest version 1.0.7.0

good evening Sorry to raise this topic again. I have the issue with the config utility whereby i cant change the season from summer. ive tried opening the app as administator as other threads have suggested but still doesnt allow the seasons to be changed. rgds matthew MTIA

Due to various reasons there is still no new/ updated scenery for Maldives. So I decided to share a couple of tips and tricks on using Aerosoft excellent Maldives X scenery in Prepar3D (I'm using ver. 4.5). 1. Installation was covered a couple of times already. One thing to remember- if you are installing by creating a "fake" fsx.exe file and then adding the three scenery folders to P3D scenery library ("Maldives X - low, medium and high priority") then one more folder needs to be added, which is "AFX" (also under "Aerosoft"). If you are using one of the "FSX to P3D Migration tools" for installation then the correct folder structure will be set up automaticall…

Does AEROSOFT - ROMA-CIAMPINO X FSX P3D (LIRA) Work in P3DV5? Apologies if this is answered elsewhere. Thank you

Hi, I have noticed a pretty high VRAM usage at Aerosoft Brno, which is really hitting the bottom of my 8GB RTX 3070Ti. With GSX Level 2 in use, my P3D has started (for the first time) crashing due to lack of free VRAM. I have tried to change various settings which could have an effect on it (Texture Resolution, EA On/OFF) however, it is still hitting the top of my VRAM capacity. I would like to stress out, that so far, this is the only airport where I have this issue, and I haven't encountered it anywhere else, especially on much bigger airports, even the likes of FlyTampa Amsterdam, etc.. So this is leading me to the conclusion that so…

Simple question: will aerosoft Bergamo professional be updated to p3d v5? I bet I am not the only one who is begging for the update.

Hello, I would like to ask please, is it possible to add AS Bergamo to P3dv5? I have seen it YouTube videos yet do not know how to do it? Thanks

Hello Good People, If any of you has ever tried changing the Default Tower View of Aerosoft Lukla Everest Extreme - can you please let me if you have succeeded. I have been using Airport Design Editor to move the default Aerosoft Tower View (Filename: AF2_VNLK.BGL) to another position - Now, moving the tower view can be done but I cannot succeed in lowering the tower viewpoint height to just above runway 24 height . No matter what I do in ADEX the tower view height will hover approximately 15 - 20 feet above runway 24. This is even if I adjust the height of the tower view by double clicking Tower View Properties. No ma…

Hey guys, I have a problem with som Sim Wings professional sceneries scince I updated to P3D V5.3. At LEMG, LEIB, LEMH and LEBL the aircraft is "floating". The strange thing is that this isn't the case all over the airport, at some points the aircraft fits to the ground. I tried it with different aircraft models and its everytime the same. I also reinstalled the sceneries but no difference at all. Would be great if u guys could help me with that issue Kind regards Luca

Hi! first of all i know there are a "couple" of topics regarding this scenery but in none of them I found a solution or even discuss about this no problem but kind of weird thing. Currently i'm using: -P3DV5.3 HF 1+ Update - ORBX Global Base Pack - ORBX openLC Europe - and even this fix everything works great , lights , some shadows are missing but i understand its maybe due to the fact the airport is built in a platform , but this Floating highway and Cell tower really sticks out , cuz I don't think this is mesh related i dint post in the mega topic…

After having updated my A320 Prof in P3Dv4 for the first time to recent AIRAC cycle 2112, I now noticed a difficulty in final approach to EDNY runway 06 which seems to stem from a discrepancy between ILS track and runway track. In the screenshot below you can see that (for wind calm) the green heading diamond and the magenta ILS track indicators of PFD and ND are not aligned although the ILS CRS is indicated to be 058 which is identical to the runway track: I checked map information and found a change in the ILS track in VATSIM maps released 2017 and 2018: So, I updated the airplane AIRAC cycle from 2112 to current 2113 and also applied…

Hey if there is anyone out there that has installed Nassau for p3d v5+ or just knows how to install if you can please assist me it would be awesome thank you !

Not a support question, just a word of thank you to the developer for keeping P3D with new destinations alive ! Much appreciated ! Mike

Hello AS Team, Do you know if some update is planned to add the new Terminal (Aile Est) at LSGG? When I'm not wrong, the terminal was opened in December 2021 thx for let me know Max

Hi. Many, if not all users of P3dv 5.3 got floating planes issue in alot of sceneries you have made. Are you in dialog with LM about this? Will these be fixed? And when? Or is support for us P3d user gone by Aerosoft? I got it on.. Maybe others to. LEMG ENVA GCLP PANC Cheers.