Jump to content

Twin Otter X Repaints (outdated product)

Sign in to follow this  

In this section you will find 3rd party repaints for the Twin Otter created by Aerosoft.

46 files

  1. Twin Otter Loganair (flybe G-BVVK)

    --------------------------------------------------
    de Havilland Canadian Twin Otter Loganair (flybe)
    textures for Aerosoft FSX payware model
    Author: Holgi 07/2009
    --------------------------------------------------

    Installation
    ------------

    1) In directory "SimObjects\Airplanes" in your FSX find subdirectory "Aerosoft Twin Otter 300"
    2) Copy there directory "texture.loganair" from this archive
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 300"
    4) Paste there following text on place above section [General]

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Loganair (flybe)
    sim=DHC6
    model=300
    panel=org
    sound=
    texture=loganair
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=G-BVVK
    atc_parking_types=GATE,RAMP
    atc_parking_code = LOG
    atc_airline = LOGAN
    atc_flight_number = LC001
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300"
    ui_variation="Loganair (flybe)"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"
    description="Repaint of Loganair aircraft by Holgi.\n \nLoganair is an airline based at Glasgow International Airport in Scotland. Its registered office is located by the airport in Paisley, Renfrewshire. Loganair operates scheduled services under a Flybe franchise in mainland Scotland and to Orkney, Shetland and the Western Isles. In addition it operates a service to Belfast City - Northern Ireland and to Birmingham from its Dundee base. Its tag line is "Scotland's Airline". It also provides services for the Scottish Air Ambulance Service and night mail services on behalf of Royal Mail.\n \nIn addition to its main base at Glasgow, the airline has hubs at Edinburgh Airport, Inverness Airport, Dundee Airport and Aberdeen Airport.\n \nThe company holds a United Kingdom Civil Aviation Authority Type A Operating Licence. It is permitted to carry passengers, cargo and mail on aircraft with 20 or more seats."


    5) Replace X in [fltsim.X] on beginning of pasted text with number x+1, where
    x is maximum value in [fltsim.x] in your aircraft.cfg

    3071 downloads

    1 comment

    Submitted

  2. Twin Otter Trans Maldivian Airways - on floats

    Generic readme for Eagleskinner repaints - AEROSOFT PAYWARE "DHC-6 Twin Otter X" is needed

    Repaint name: Twin Otter Trans Maldivian Airways - on floats

    Painter's notes and Installation instructions.

    This paint has been prepared by Chris Brisland

    web: www.eagleskinner.com

    e-mail: christopher@brisland.com

    This paint is for AEROSOFT PAYWARE "DHC-6 Twin Otter X"

    Original copyright for this aircraft with Aerosoft.

    Original copyright for TMA liveries is with Trans Maldivian Airways.

    Please respect copyrights and intellectual property rights.

    This paint has been created with the kind permission of TMA Managing Director, Mr. Bram Steller. Thank you Bram for the excellent photographs. This paint may not be altered in any way without permission from both myself, Chris Brisland, and Trans Maldivian Airways.

    Please also take note that this permission to paint TMA Twotter schemes is exclusively given to me, Chris Brisland. No permission is given to anyone else to paint either the current TMA liveried Twin Otters nor any older liveries.


    NOTES

    INSTALLATION

    This zipfile contains only those textures actually changed during the painting process.

    Open your FSX aircraft folder for this particular download - it will be something like c://Program Files/Microsoft Games/Microsoft Flight Simulator X/Sim Objects/Airplanes/Aerosoft Twin Otter 100 Floats

    Extract this zipfile there. Make sure the winzip option "Use Folder Names" is checked. A new sub-folder called "texture.tma" will be created.

    Next open the aircraft.cfg file with any text editor program (Windows editor does the trick) and find the last block of text that starts with a line [fltsim.x] where the x will be a sequential number which starts at flightsim.0 and goes on for as many variants of the model are installed.

    The path to the aircraft configuration file will be:

    c://Program Files/Microsoft Games/Microsoft Flight Simulator X/Sim Objects/Airplanes/Aerosoft Twin Otter 300/aircraft.cfg


    Copy and paste the block of text from below into the aircraft.cfg file and change the x in the first line to the next number up in sequence in your cfg file


    Go flying and enjoy!


    [fltsim.x]
    title=de Havilland Canadian Twin Otter TMA - on floats
    sim=DHC6
    model=float
    panel=
    sound=
    texture=tma
    kb_checklists=
    kb_reference=
    atc_id=8QTMA
    atc_airline=Trans Maldivian Airways
    atc_flight_number=007
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-Float"
    ui_variation="Trans Malivian Airways floater TMA"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"
    description="Repaint of Trans Maldivian Airways very first Twin Otter - in recent livery and on floats!\nRepaint by Chris 'Eagleskinner' Brisland\nThis paint may not be altered in any way whatsoever without contacting the author first. /nFSX Model livery © Chris Brisland Feb 2008\nReal World TMA livery © Trans Maldivian Airways


    #########################
    # Here is a small bonus #
    #########################

    While you are in an editing mood, why not scroll down the aircraft config until you find the last entry "[CameraDefinition.00x]" (It will probably be 006 if Aerosoft didn't change the config from the last beta). NOTE: make sure you find 00x and not just the single digit one. You will note in line 3, that this camera definition is a new virtual cockpiut view...

    Just copy/paste the lines here to after the last existing camera definition entry and change the sequential number to the next in line - as I mentioned above, the last one may be 006, so this one will be 007...

    So next time you go flying, flick through the virtual cockpit views (key "a" when in VC mode) and the new view will show as "Window seat stbd Row 2C" giving you a passenger's eye view of the starboard engine...

    Just a spot of fun...

    [CameraDefinition.00x]
    Title = "Window seat stbd Row 2C"
    Guid = {03710088-6EE0-42ba-80B4-1E92E5700A9A}
    Origin = Virtual Cockpit
    MomentumEffect = No
    SnapPbhAdjust = Swivel
    SnapPbhReturn = False
    PanPbhAdjust = Swivel
    PanPbhReturn = False
    Track = None
    ShowAxis = FALSE
    AllowZoom = TRUE
    InitialZoom = 0.40
    SmoothZoomTime = 2.0
    ZoomPanScalar = 1.0
    ShowWeather = Yes
    XyzAdjust = TRUE
    ShowLensFlare=FALSE
    Category = Cockpit
    PitchPanRate=20
    HeadingPanRate=60
    InitialXyz=0.95, -0.33, -1.73
    InitialPbh=-1.5, 0.0, 86.0

    1686 downloads

    193 comments

    Submitted

  3. DHC-6 Twin Otter SKIN PACK Vol1 v2b

    A skin pack with AEROSOFT FSX DHC-6 Twin Otter skins :


    7 SKINS:

    AEROSOFT DHC-6-300 FEDEX
    AEROSOFT DHC-6-300 DHL
    AEROSOFT DHC-6-300 RCAF Rangers
    AEROSOFT DHC-6-300 RCAF Rangers paratrooper version
    AEROSOFT DHC-6-300 SKI WHEELS Canadian North Airline
    AEROSOFT DHC-6-100 RCAF wheels version
    AEROSOFT DHC-6-100 RCAF floats version

    1873 downloads

    2 comments

    Updated

  4. FSX Air Seychelles DeHavilland DHC-6 Twin Otter in "Selebre Sesel" livery

    Generic readme for Eagleskinner repaints - AEROSOFT PAYWARE "DHC-6 Twin Otter X" is needed

    Repaint name: Air Seychelles "Selebre Sesel" livery

    Painter's notes and Installation instructions.

    This paint has been prepared by Chris Brisland

    web: www.eagleskinner.com

    e-mail: christopher@brisland.com

    This paint is for AEROSOFT PAYWARE "DHC-6 Twin Otter X"

    Original copyright for this aircraft with Aerosoft. Please respect copyrights and intellectual property rights.


    NOTES

    INSTALLATION

    This zipfile contains only those textures actually changed during the painting process.

    Open your FSX aircraft folder for this particular download - it will be something like c://Program Files/Microsoft Games/Microsoft Flight Simulator X/Sim Objects/Airplanes/Aerosoft Twin Otter 300

    Extract this zipfile there. Make sure the winzip option "Use Folder Names" is checked. A new sub-folder called "texture.s7aaj" will be created.

    Next open the aircraft.cfg file with any text editor program (Windows editor does the trick) and find the last block of text that starts with a line [fltsim.x] where the x will be a sequential number which starts at flightsim.0 and goes on for as many variants of the model are installed.

    The path to the aircraft configuration file will be:

    c://Program Files/Microsoft Games/Microsoft Flight Simulator X/Sim Objects/Airplanes/Aerosoft Twin Otter 300/aircraft.cfg


    Copy and paste the block of text from below into the aircraft.cfg file and change the x in the first line to the next number up in sequence in your cfg file


    Go flying and enjoy!


    [fltsim.x]
    title=de Havilland Canada Twin Otter Seychelles AAJ
    sim=DHC6
    model=300
    panel=org
    sound=
    texture=s7aaj
    kb_checklists=
    kb_reference=
    atc_id=S7AAJ
    atc_airline=Seychelles
    atc_flight_number=010
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300"
    ui_variation="Isle of Desroches"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"



    #########################
    # Here is a small bonus #
    #########################

    While you are in an editing mood, why not scroll down the aircraft config until you find the last entry "[CameraDefinition.00x]" (It will probably be 006 if Aerosoft didn't change the config from the last beta). NOTE: make sure you find 00x and not just the single digit one. You will note in line 3, that this camera definition is a new virtual cockpiut view...

    Just copy/paste the lines here to after the last existing camera definition entry and change the sequential number to the next in line - as I mentioned above, the last one may be 006, so this one will be 007...

    So next time you go flying, flick through the virtual cockpit views (key "a" when in VC mode) and the new view will show as "Window seat stbd Row 2C" giving you a passenger's eye view of the starboard engine...

    Just a spot of fun...

    [CameraDefinition.00x]
    Title = "Window seat stbd Row 2C"
    Guid = {03710088-6EE0-42ba-80B4-1E92E5700A9A}
    Origin = Virtual Cockpit
    MomentumEffect = No
    SnapPbhAdjust = Swivel
    SnapPbhReturn = False
    PanPbhAdjust = Swivel
    PanPbhReturn = False
    Track = None
    ShowAxis = FALSE
    AllowZoom = TRUE
    InitialZoom = 0.40
    SmoothZoomTime = 2.0
    ZoomPanScalar = 1.0
    ShowWeather = Yes
    XyzAdjust = TRUE
    ShowLensFlare=FALSE
    Category = Cockpit
    PitchPanRate=20
    HeadingPanRate=60
    InitialXyz=0.95, -0.33, -1.73
    InitialPbh=-1.5, 0.0, 86.0

    2026 downloads

    0 comments

    Submitted

  5. Twin Otter Maldivian Air Taxi (8Q-MAL) - on floats

    -------------------------------------------------------------
    de Havilland Canadian Twin Otter Maldivian Air Taxi (8Q-MAL)
    textures for Aerosoft FSX payware model
    Author: Holgi 07/2009
    -------------------------------------------------------------

    Installation
    ------------

    1) In directory "SimObjects\Airplanes" in your FSX find subdirectory "Aerosoft Twin Otter 100 Floats"
    2) Copy there directory "texture.8Q-MAL" from this archive
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 100 Floats"
    4) Paste there following text on place above section [General]

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Maldivian Air Taxi (8Q-MAL)
    sim=DHC6
    model=float
    panel=
    sound=
    texture=8Q-MAL
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=8Q-MAL
    atc_airline=MALDIVIAN
    atc_flight_number=003
    atc_parking_types=RAMP
    atc_parking_code=MAT
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-Float"
    ui_variation="Maldivian Air Taxi - (8Q-MAL)"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"
    description="Repaint of MALDIVIAN AIR TAXI by Holgi.\n \nMaldivian Air Taxi is an air taxi service based in Malé in the Maldives. It operates float-equipped Twin Otters on tourist charters throughout the Maldives. Its main base is Malé International Airport.\nThe airline was established in 1993 by Danish investors and started operations in the same year. It is wholly owned by Lars Erik Nielsen (Chairman) and has 275 employees (at March 2007)."


    5) Replace X in [fltsim.X] on beginning of pasted text with number x+1, where
    x is maximum value in [fltsim.x] in your aircraft.cfg







    1774 downloads

    3 comments

    Submitted

  6. Twin Otter Maldivian Air Taxi (8Q-MAD)

    -------------------------------------------------------------
    de Havilland Canadian Twin Otter Maldivian Air Taxi (8Q-MAD)
    Hilton Livery
    textures for Aerosoft FSX payware model
    Author: Holgi 12/2009
    -------------------------------------------------------------

    Installation
    ------------

    1) In directory "SimObjects\Airplanes" in your FSX find subdirectory "Aerosoft Twin Otter 100 Floats"
    2) Copy there directory "texture.hilton" from this archive
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 100 Floats"
    4) Paste there following text on place above section [General] and [CameraDefinition.0]

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Maldivian Air Taxi (Hilton Livery)
    sim=DHC6
    model=float
    panel=
    sound=
    texture=hilton
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=8Q-MAD
    atc_airline=MALDIVIAN
    atc_flight_number=004
    atc_parking_types=RAMP
    atc_parking_code=MAT
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-Float"
    ui_variation="Maldivian Air Taxi - (Hilton Livery)"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"
    description="Repaint of MALDIVIAN AIR TAXI (Hilton Livery) by Holgi.\n \nMaldivian Air Taxi is an air taxi service based in Malé in the Maldives. It operates float-equipped Twin Otters on tourist charters throughout the Maldives. Its main base is Malé International Airport.\nThe airline was established in 1993 by Danish investors and started operations in the same year. It is wholly owned by Lars Erik Nielsen (Chairman) and has 275 employees (at March 2007)."


    5) Replace X in [fltsim.X] on beginning of pasted text with number x+1, where
    x is maximum value in [fltsim.x] in your aircraft.cfg

    1588 downloads

    0 comments

    Submitted

  7. DHC-6-100 First Air C-FASG

    De Havilland Canadian Twin Otter 100 Wheels - FIrst Air C-FASG

    Author: Peter Rowntree (spike9@rogers.com)

    Place the entire folder labeled "texture.asg" into your fsx/simobjects/airplanes/Aerosoft Twin Otter 100 Wheels folder.
    Then copy the info below and paste into your 100 wheels aircraft.cfg file and replace the "X" with the appropriate number.

    Note: There is a minor paint problem with the bottom of the rudder on the right side this can't be fixed without disrupting the paint on the nose. I figured it is more inconspicuous at the back.

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter First Air ASG
    sim=DHC6
    model=100
    panel=
    sound=
    texture=asg
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=FASG
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-100"
    ui_variation="First Air C-FASG"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"

    548 downloads

    3 comments

    Updated

  8. Aerosoft Twin Otter - Skybus

    Two Isles of Scilly Skybus repaints G-CBML and G-CEWM, created by me last year. Instructions to add the liveries into the aircraft.cfg file can be found in the Readme.txt.

    1099 downloads

    1 comment

    Submitted

  9. AeroSoft/Dehavilland Twin Otter Seair Pacific

    De Havilland Canadian Twin Otter - "Seair Pacific"
    textures for Aerosoft FSX payware model
    Author: Thierry Lustremant (thierry@titus59.info) 21/08/2008


    Installation
    1) Extract all the files to a temperary folder
    2) Copy there folder "texture.VH-TZR" into FSX directory "SimObjects\Airplanes\Aerosoft Twin Otter 300
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 300"
    4) Paste there following text on place above section [General]

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Seair Pacific
    sim=DHC6
    model=300
    panel="org"
    sound=
    texture=VH-TZR
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=VH-TZR
    atc_parking_types=RAMP
    atc_airline=Seair Pacific
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300"
    ui_variation="Seair Pacific"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"
    description= Aircraft first registered in Australia: 18 September 1989. Model: DHC-6 SERIES 200. Serial number: 145. Based at Coolangatta on Queensland's Gold Coast. Seair's Great Barrier Reef Daytrip is the only one of its type in Australia. This tour also departs from Maroochydore Airport on the Sunshine Coast.

    5) Replace the X in [fltsim.X] with the next available number in the aircraft.cfg file i.e if the last entry is 6 change the X to 7



    This is my second repaint, so any comments or suggestions are welcome.
    I've tried to reskin the interior of the plane a little bit too. Hope you'll like it !

    Thierry

    569 downloads

    5 comments

    Submitted

  10. Aerosoft Twin Otter 300 Modern "ADA"

    De Havilland Canadian Twin Otter 300 Modern - "ADA"

    Author: Matt Gaither (mrgaither54@yahoo.com)

    Place the entire folder labeled "texture.ADA" into your fsx/simobjects/airplanes/Aerosoft Twin Otter 300 modern folder.
    Then copy the info below and paste into your 300 modern aircraft.cfg file and replace the "X" with the appropriate number.

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter ADA
    sim=DHC6
    model=gps
    panel=
    sound=
    texture=ada
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=HK-2603
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300 modern"
    ui_variation="Aerolínea de Antioquia"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"

    585 downloads

    5 comments

    Submitted

  11. Air Greenland - DHC-6 Twin Otter 300 ski

    De Havilland Canadian Twin Otter Air Greenland
    textures for Aerosoft FSX DHC-6 Twin Otter 300 payware model
    Paint kit made by Aerosoft
    Repaint by Curro Candela Lopez
    --------------------------------------------------

    Installation
    ------------

    1) In directory "SimObjects\Airplanes" in your FSX find subdirectory "Aerosoft Twin Otter 300 Wheel Ski"
    2) Copy there directory "texture.OYPOF" from this archive
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 300 Wheel Ski"
    4) Paste there following text on place above section [General]

    [FLTSIM.1]
    title=de Havilland Canadian Twin Otter Greenland
    sim=DHC6
    model=ski
    panel=
    sound=
    texture=OYPOF
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=OY-POF
    atc_parking_types=RAMP
    atc_airline=Air Greenland
    atc_flight_number=GL792
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300"
    ui_variation="Air Greenland"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"


    5) Replace [fltsim.x] with the next number in sequence

    778 downloads

    2 comments

    Submitted

  12. Aerolinea de Antioquia ADA HK-2669 Arcangel Rafael

    DH-6 Twin Otter Arcangel Rafael HK-2669 Aerolinea de Antioquia for FSx

    Esta es una textura elaborada para el DH-6 Twin Otter( modelo creado por Aerosoft). Corresponde al Aracangel Rafael de ADA con matricula HK-2669.

    This is a texture made for el DH-6 Twin Otter(created by Aerosoft model). corresponds Aracangel Rafael off ADA FTE enrollment HK-2669

    By Miguel Calderon
    mac.perez@hotmail.com

    710 downloads

    0 comments

    Updated

  13. Twin Otter Swiss Federal Office of Topography (T-741)

    --------------------------------------------------------------------
    de Havilland Canadian Twin Otter Swiss Federal Office of Topography
    textures for Aerosoft FSX payware model
    Author: Holgi 07/2009
    --------------------------------------------------------------------

    Installation
    ------------

    1) In directory "SimObjects\Airplanes" in your FSX find subdirectory "Aerosoft Twin Otter 300"
    2) Copy there directory "texture.Swiss_T-741" from this archive
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 300"
    4) Paste there following text on place above section [General]

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Swiss Federal Office of Topography
    sim=DHC6
    model=300
    panel=org
    sound=
    texture=Swiss_T-741
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=T-741
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300"
    ui_variation="Swiss Federal Office of Topography"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"
    description="Repaint of Swisstopo aircraft by Holgi.\n \nSwisstopo is the common name for the Swiss Federal Office of Topography (in German: Bundesamt für Landestopographie. French: Office fédéral de topographie. Italian: Ufficio federale di topografia. Romansh: Uffizi federal da topografia). This name was chosen as a neutral name to avoid choosing a language when its website was launched in 1997. \n \nAircrafts: \nTwo powerful twin-engined aircraft are available to meet a full range of requirements in Switzerland and abroad.\nSuper King Air 350C and Twin Otter DHC-6-300 \n \n- Applications vertical aerial photography at scales from 1:2500 to 1:60000 \n- platform for projects such as laser scanning and airborne gravimetry \n \nTechnical Details (Twin Otter DHC-6-300): \nOperational ceiling: 8 100 m \nCruising speed: 280 km/h \nMaximum range: 3 200 km \nPayload (with full tank): 950 kg \nMax. takeoff weight: 5 670 kg \nEngines: 2 × 1 652 PS"


    5) Replace X in [fltsim.X] on beginning of pasted text with number x+1, where
    x is maximum value in [fltsim.x] in your aircraft.cfg


    1021 downloads

    0 comments

    Submitted

  14. Innu Mikun (Provincial Airlines) - DHC-6 Twin Otter 300

    de Havilland Canadian Twin Otter Innu Mikun - Provincial Airlines
    textures for Aerosoft FSX payware model
    Paint kit made by Aerosoft
    Repaint by Curro Candela Lopez
    --------------------------------------------------

    Installation
    ------------

    1) In directory "SimObjects\Airplanes" in your FSX find subdirectory "Aerosoft Twin Otter 300 modern"
    2) Copy there directory "texture.innu" from this archive
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 300 modern"
    4) Paste there following text on place above section [General]


    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Innu
    sim=DHC6
    model=gps
    panel=
    sound=
    texture=innu
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=C-GJDE
    atc_parking_types=GATE,RAMP
    atc_airline=Innu Mikun
    atc_flight_number=639
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300 modern"
    ui_variation="Innu Mikun - Provincial Airlines"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"

    5) Replace [fltsim.x] with the next number in sequence

    612 downloads

    1 comment

    Submitted

  15. MASWings

    Installation

    Place the texture folder "NWA300" in the "Microsoft Flight Simulator X\SimObjects\Airplanes\Aerosoft Twin Otter 300" folder

    Edit the aircraft.cfg file, copy the text below and paste after the last [FLTSIM.number?] into the file and replace the "X" with the appropriate number.




    [FLTSIM.X]
    title=DHC Twin Otter Maswings
    sim=DHC6
    model=gps
    panel=
    sound=
    texture=MAS1
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300 modern"
    ui_variation="MASWings"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"


    717 downloads

    0 comments

    Submitted

  16. airBC - DHC-6 300 Twin Otter 100 floats

    De Havilland Canadian Twin Otter AirBC Floatplane
    textures for Aerosoft FSX payware model
    Paint kit made by Aerosoft
    Repaint by Curro Candela Lopez
    --------------------------------------------------

    Installation
    ------------

    1) In directory "SimObjects\Airplanes" in your FSX find subdirectory "Aerosoft Twin Otter 100 floats"
    2) Copy there directory "texture.airbc" from this archive
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 100 floats"
    4) Paste there following text on place above section [General]


    [FLTSIM.x]
    title=de Havilland Canadian Twin Otter AirBC
    sim=DHC6
    model=float
    panel=
    sound=
    texture=airbc
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=C-GGAW
    atc_parking_types=RAMP
    atc_airline=airBC
    atc_flight_number=
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-Float"
    ui_variation="airBC"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"

    5) Replace [fltsim.x] with the next number in sequence

    510 downloads

    0 comments

    Submitted

  17. Aerosoft Twin Otter 300 Modern "Island Air"

    Aloha Island Air Twotter - N708PV

    1105 downloads

    0 comments

    Submitted

  18. Airkenya - DHC-6 Twin Otter 300

    De Havilland Canadian Twin Otter Airkenya
    textures for Aerosoft FSX payware model
    Paint kit made by Aerosoft
    Repaint by Curro Candela Lopez
    --------------------------------------------------

    Installation
    ------------

    1) In directory "SimObjects\Airplanes" in your FSX find subdirectory "Aerosoft Twin Otter 300 modern"
    2) Copy there directory "texture.5YBIO" from this archive
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 300 modern"
    4) Paste there following text on place above section [General]


    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Airkenya
    sim=DHC6
    model=gps
    panel=
    sound=
    texture=5YBIO
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=5Y-BIO
    atc_parking_types=GATE,RAMP
    atc_airline=Airkenya
    atc_flight_number=
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300 modern"
    ui_variation="Airkenya"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"

    5) Replace [fltsim.x] with the next number in sequence

    654 downloads

    0 comments

    Updated

  19. Canada Air Survelliance - DHC 6 Twin Otter 300

    de Havilland Canadian Twin Otter Canada Air Survelliance
    textures for Aerosoft FSX payware model
    Paint kit made by Aerosoft
    Repaint by Curro Candela Lopez
    --------------------------------------------------

    Installation
    ------------

    1) In directory "SimObjects\Airplanes" in your FSX find subdirectory "Aerosoft Twin Otter 300 modern"
    2) Copy there directory "texture.survcan" from this archive
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 300 modern"
    4) Paste there following text on place above section [General]


    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter survelliance
    sim=DHC6
    model=gps
    panel=
    sound=
    texture=survcan
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=C-FCSU
    atc_parking_types=GATE,RAMP
    atc_airline=Canada Air Survelliance
    atc_flight_number=457
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300 modern"
    ui_variation="Canada Air Survelliance"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"

    5) Replace [fltsim.x] with the next number in sequence

    757 downloads

    0 comments

    Submitted

  20. Aerosoft Twin Otter X 300 Modern - Scenic Airlines Pack

    As a complement to Geoff Shipton's "Vista Liner" repaint, I have uploaded my repaints of some of the other aircraft in the old fleet, namely N149SA, N228SA, N241SA, & N253SA. Each paint is different in it's own way, so there is some variety. Instructions for installation are in the included Readme.txt.

    685 downloads

    0 comments

    Submitted

  21. Twin Otter Maldivian Air Taxi ConradHotels.com Edition (8Q-MAB) - on floats

    -------------------------------------------------------------
    de Havilland Canadian Twin Otter Maldivian Air Taxi (8Q-MAB)
    ConradHotels.com Edition
    textures for Aerosoft FSX payware model
    Author: Holgi 07/2009
    -------------------------------------------------------------

    Installation
    ------------

    1) In directory "SimObjects\Airplanes" in your FSX find subdirectory "Aerosoft Twin Otter 100 Floats"
    2) Copy there directory "texture.conrad" from this archive
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 100 Floats"
    4) Paste there following text on place above section [General]

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Maldivian Air Taxi (ConradHotels.com)
    sim=DHC6
    model=float
    panel=
    sound=
    texture=conrad
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=8Q-MAB
    atc_airline=MALDIVIAN
    atc_flight_number=002
    atc_parking_types=RAMP
    atc_parking_code=MAT
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-Float"
    ui_variation="Maldivian Air Taxi - (ConradHotels.com)"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"
    description="Repaint of MALDIVIAN AIR TAXI (ConradHotels.com Edition) by Holgi.\n \nMaldivian Air Taxi is an air taxi service based in Malé in the Maldives. It operates float-equipped Twin Otters on tourist charters throughout the Maldives. Its main base is Malé International Airport.\nThe airline was established in 1993 by Danish investors and started operations in the same year. It is wholly owned by Lars Erik Nielsen (Chairman) and has 275 employees (at March 2007)."


    5) Replace X in [fltsim.X] on beginning of pasted text with number x+1, where
    x is maximum value in [fltsim.x] in your aircraft.cfg


    760 downloads

    1 comment

    Submitted

  22. Aerosoft Twin Otter 300 Modern "Bass Master"

    De Havilland Canadian Twin Otter 300 Modern - "Bass Master"

    Author: Matt Gaither (mrgaither54@yahoo.com)

    Place the entire folder labeled "texture.bass" into your fsx/simobjects/airplanes/Aerosoft Twin Otter 300 modern folder.
    Then copy the info below and paste into your 300 modern aircraft.cfg file and replace the "X" with the appropriate number.

    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter Bass Master
    sim=DHC6
    model=gps
    panel=
    sound=
    texture=bass
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=BASS
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300 modern"
    ui_variation="Bass Master"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"

    591 downloads

    0 comments

    Submitted

  23. Air Tindi - DHC 6 Twin Otter 100 floats

    de Havilland Canadian Twin Otter Air Tindi float plane
    textures for Aerosoft FSX payware model
    Paint kit made by Aerosoft
    Repaint by Curro Candela Lopez
    --------------------------------------------------

    Installation
    ------------

    1) In directory "SimObjects\Airplanes" in your FSX find subdirectory "Aerosoft Twin Otter 100 floats"
    2) Copy there directory "texture.tindi" from this archive
    3) Open file "aircraft.cfg" which is in directory "Aerosoft Twin Otter 100 floats"
    4) Paste there following text on place above section [General]


    [FLTSIM.x]
    title=de Havilland Canadian Twin Otter Air Tindi
    sim=DHC6
    model=float
    panel=
    sound=
    texture=tindi
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=C-FGOG
    atc_parking_types=RAMP
    atc_airline=Air Tindi
    atc_flight_number=745
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-Float"
    ui_variation="Air Tindi"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"

    5) Replace [fltsim.x] with the next number in sequence

    554 downloads

    0 comments

    Updated

  24. Aerosoft Twin Otter 300 Modern "ACES"

    De Havilland Canadian Twin Otter 300 Modern - "ACES"

    Author: Matt Gaither (mrgaither54@yahoo.com)

    Place the entire folder labeled "texture.santa" into your fsx/simobjects/airplanes/Aerosoft Twin Otter 300 modern folder.
    Then copy the info below and paste into your 300 modern aircraft.cfg file and replace the "X" with the appropriate number.


    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter ACES
    sim=DHC6
    model=gps
    panel=
    sound=
    texture=aces
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=HK-2540
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300 modern"
    ui_variation="ACES"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"

    592 downloads

    0 comments

    Submitted

  25. AFC Aero Flug Charter DHC6 "Warsteiner"

    Repaint for the Aerosoft DHC6 Twin Otter.
    This is a Repaint of the Original DHC6 from "AFC Aero Flug Charter"




    Installation:

    Copy the folder texture.AFC into your Aerosoft "Twin Otter 300 folder".

    Open aircraft.cfg using notepad and copy the following lines (replacing X with the next number in the sequence). Save the modified 'aircraft.cfg' file.


    Thats all.




    [FLTSIM.X]
    title=de Havilland Canadian Twin Otter AFC
    sim=DHC6
    model=para
    panel=org
    sound=
    texture=AFC
    kb_checklists=dhc6-300-wheel_check
    kb_reference=dhc6-300-wheel_ref
    atc_id=D-ISKY
    atc_parking_types=RAMP
    ui_manufacturer="de Havilland Canada"
    ui_type="DHC-6-300"
    ui_variation="AFC"
    ui_typerole="Twin Engine TurboProp"
    ui_createdby="Aerosoft"


    Nice Flights and happy landings

    Gerd form www.Team-Niederbayern.de

    552 downloads

    0 comments

    Updated

Sign in to follow this  
×
×
  • Create New...