kaktus018 7 Posted July 6, 2015 Share Posted July 6, 2015 Hi, I've posted this some time ago and thought I had fixed it with a reinstall. However, this bug is still present in the current version (1.31f). When I set up FSX and load the flight, the plane is generally configured strangely (NW steering off, gear lever up, etc.). On the lower ECAM the FCTL page is displayed. So I go ahead and load cold and dark state. Now, after powering up, the FCTL page is still displayed as default and there is no way to get rid of it (no door page, eng page is not displayed on start up, no wheel page on taxi and takeoff). It only changes to the cruise page once the climb phase is active. In the past I was always able to fix it by lowering the gear lever before loading cold and dark and pressing the clear button. On the last two flights that didn't work and I had to reload the flight several times to get it working. Most recently I saw the same issue on one of Matt Davies videos and decided to report it again: https://www.youtube.com/watch?v=xB-N63gm-a8 Link to comment Share on other sites More sharing options...
Emi 5161 Posted July 6, 2015 Share Posted July 6, 2015 Hi, this sounds a lot like you have some general initialisation issues. Which aircraft did you choose in the standart flight? Link to comment Share on other sites More sharing options...
kaktus018 7 Posted July 6, 2015 Author Share Posted July 6, 2015 For the standard flight (FSX SP2, no other sims installed) it would be the A320 CFM. The problem is exactly the same as in Matts video. Link to comment Share on other sites More sharing options...
Emi 5161 Posted July 6, 2015 Share Posted July 6, 2015 Please change it to a default aircraft like the C172 or Air Creation Trike. Link to comment Share on other sites More sharing options...
kaktus018 7 Posted July 16, 2015 Author Share Posted July 16, 2015 Tried it and it's still the same, but apparently this will be fixed with SP4. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.