aletaras 0 Posted May 24, 2015 Share Posted May 24, 2015 Hello Guys, the runway of Catania, are runway 08 and runway 26, whwn it take-off from runway 08 with Sid Pekod 5A, everything works fine, but when it take off from runway 26 with Sid Pekod 5B, do not understand why when the Aircraft gets to the point Pekod, completely abandons the route, Flying alone, I am attaching two screenshots, and look forward to your reply, thank you greetings. Alessandro Link to comment Share on other sites More sharing options...
Jan-Paul Schuchna 24 Posted May 25, 2015 Share Posted May 25, 2015 Hi, the FMS coding is correct as I can see. That seems to be a problem related to the Airbus. Could you please post that in the Airbus Support Forum again. Jan-Paul Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted May 25, 2015 Deputy Sheriffs Share Posted May 25, 2015 Moved Link to comment Share on other sites More sharing options...
Deputy Sheriffs The Dude 6537 Posted May 25, 2015 Deputy Sheriffs Share Posted May 25, 2015 I just flew the departure and the routing after PEKOD but with me it all works as it should, it follows the FPLN. Does this always happen or was it a way time thing? Link to comment Share on other sites More sharing options...
rangerobert 11 Posted May 26, 2015 Share Posted May 26, 2015 Hi there Hello Guys, the runway of Catania, are runway 08 and runway 26, whwn it take-off from runway 08 with Sid Pekod 5A, everything works fine, but when it take off from runway 26 with Sid Pekod 5B, do not understand why when the Aircraft gets to the point Pekod, completely abandons the route, Flying alone, I am attaching two screenshots, and look forward to your reply, thank you greetings. Alessandro I was curious as LICC is my homebase (I live here) and very familiar to these procedures. So I flew both SIDs once more ... I just flew the departure and the routing after PEKOD but with me it all works as it should, it follows the FPLN. Does this always happen or was it a way time thing? ... and I can confirm that all is well on the Bus. Exactly like for PEKOD 5A, when I flew PEKOD 5B with a T/O from RWY26, the flight plan went perfectly. Left PEKOD exit fix, the plane went direct to SOPOM on UT111, as for the plan on the clearance. roberto Link to comment Share on other sites More sharing options...
aletaras 0 Posted May 26, 2015 Author Share Posted May 26, 2015 Hi, the FMS coding is correct as I can see. That seems to be a problem related to the Airbus. Could you please post that in the Airbus Support Forum again. Jan-Paulok provider and thanks Inviato dal mio iPhone utilizzando Tapatalk Link to comment Share on other sites More sharing options...
aletaras 0 Posted May 26, 2015 Author Share Posted May 26, 2015 With the old Airbus did not happen, it is with this new Airbus that whenever I start from KAG only from the track 26 with plane router Finder makes me get to this defect of Pekod 5B already moved away of course and then abandoned completely, I can understand why, are forced to return to a direct route. Alessandro Inviato dal mio iPhone utilizzando Tapatalk Link to comment Share on other sites More sharing options...
aletaras 0 Posted May 26, 2015 Author Share Posted May 26, 2015 No Kag LICC Catania Inviato dal mio iPhone utilizzando Tapatalk Link to comment Share on other sites More sharing options...
Deputy Sheriffs Tom A320 4915 Posted May 26, 2015 Deputy Sheriffs Share Posted May 26, 2015 As you are talking from the old and the new bus, what bus and what software version of it are you using? Also what navigation data source are you using (NavDataPro or Navigraph) in which cycle? Can you post an image from the DATA page of the left MCDU please, just to check, that the source is correctly configured and loaded. Link to comment Share on other sites More sharing options...
aletaras 0 Posted May 26, 2015 Author Share Posted May 26, 2015 Hello Tom, I happened to be with A320 and A321, I Navdatapro annual subscription is updated, are now out of the house with the iPhone later I can post photos MCDU, thanks hello. Inviato dal mio iPhone utilizzando Tapatalk Link to comment Share on other sites More sharing options...
aletaras 0 Posted May 26, 2015 Author Share Posted May 26, 2015 Here several screenshots, let me know if it's okay with hello. Alessandro Link to comment Share on other sites More sharing options...
aletaras 0 Posted May 26, 2015 Author Share Posted May 26, 2015 hello I also live here, i send you screenshots of the flight plan. Alessandro Link to comment Share on other sites More sharing options...
Deputy Sheriffs Tom A320 4915 Posted May 26, 2015 Deputy Sheriffs Share Posted May 26, 2015 Ok, your navigation data are configured correctly and the most recent ones... You haven't answered my question about the software version you are using (plain release? service pack? hotfix?) Link to comment Share on other sites More sharing options...
aletaras 0 Posted May 27, 2015 Author Share Posted May 27, 2015 Ok, your navigation data are configured correctly and the most recent ones... You haven't answered my question about the software version you are using (plain release? service pack? hotfix?) Link to comment Share on other sites More sharing options...
aletaras 0 Posted May 27, 2015 Author Share Posted May 27, 2015 Hello Tom, I can not understand the question, I bought the bundle download A318 A319 A320 A321, I do not know if I've responded well. Alessandro Link to comment Share on other sites More sharing options...
Deputy Sheriffs Tom A320 4915 Posted May 27, 2015 Deputy Sheriffs Share Posted May 27, 2015 You can check in the file product.cfg for the installed version. You will find it here: \FSX or Prepared3D v2\aerosoft\Airbus A318_A319\ respective \FSX or Prepared3D v2\aerosoft\Airbus A320_A321\ Link to comment Share on other sites More sharing options...
aletaras 0 Posted May 27, 2015 Author Share Posted May 27, 2015 I'am sorry Tom are not very adept at using the PC, I am attaching some screenshots. Alessandro Link to comment Share on other sites More sharing options...
rangerobert 11 Posted May 27, 2015 Share Posted May 27, 2015 Ok, now. It looks like you have 1.21. You should update the product with Service Pack 3, and after with Hotfix 1.30e. Good luck ;o) roberto Link to comment Share on other sites More sharing options...
Deputy Sheriffs Tom A320 4915 Posted May 27, 2015 Deputy Sheriffs Share Posted May 27, 2015 As Roberto wrote, there is a Service Pack 3 available. You will find it in your shop account as current download. Additionally there is an hotfix available for that service pack: http://forum.aerosoft.com/index.php?/forum/666-updates-news-and-hotfixes/ I can't tell if your problem will be solved with this version, but as I (and others) were not able to reproduce it, there are certain chances. Link to comment Share on other sites More sharing options...
aletaras 0 Posted May 27, 2015 Author Share Posted May 27, 2015 Hello Tom, I wanted to know, this service pack 3 is a free upgrade? or you have to buy it? Alessandro Link to comment Share on other sites More sharing options...
Deputy Sheriffs Tom A320 4915 Posted May 27, 2015 Deputy Sheriffs Share Posted May 27, 2015 Yes, it's free. Just go to your shop account from where you already downloaded your current version. Instead of that version, you will see a download links for the service pack 3 (1.30). It is a full installer, so uninstall your current version and install SP3. During the installation you will be asked for your existing serial number (just like you were asked when you installed your current version). Link to comment Share on other sites More sharing options...
aletaras 0 Posted May 27, 2015 Author Share Posted May 27, 2015 Hello Tom, I downloaded service pack 3 A318 A319, just do not let me download A320 A321 tells me so why? ERROR THE MAXIMUM NUMBER OF DOWNLOADS ARE REACHED PLEASE CONTACT THE SUPPORT Alessandro Link to comment Share on other sites More sharing options...
aletaras 0 Posted May 27, 2015 Author Share Posted May 27, 2015 Ok solved. Alessandro Link to comment Share on other sites More sharing options...
aletaras 0 Posted May 28, 2015 Author Share Posted May 28, 2015 Hello Tom, I downloaded everything and tried again, the problem remains, virtually the route stops at the point RCA, Pekod is white as the next waypoint, only intervene if a direct Pekod in order to continue the route, I wondered, perhaps departure left the page where it says OFF SET you have to enter something? Alessandro Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted May 28, 2015 Deputy Sheriffs Share Posted May 28, 2015 I wondered, perhaps departure left the page where it says OFF September must enter something? Screenshot? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.