CaptOwen 3 Posted April 13, 2015 Share Posted April 13, 2015 Hello, Have just installed SP3 following the guidelines in the other thread i.e uninstalling SP2 and have found that I have the same engine oscillation problem that was apparent before the hotfix. In fact its a lot worse. This is the second test flight that I am making in the A319 IAE model with ASN. I have been at my cruising level for 75nm now and the engines are still oscillating between 1.2 EPR and 1.4 EPR, Throttles are correctly in the CLB setting. Exactly the same problem in the other test flight an hour or so ago, even at a lower altitude, i.e FL070 on a SID when the aircraft is not climbing or descending the throttles are oscillating the whole time which frankly makes it pretty unflyable. Any ideas on how to fix it? Am I best applying an hold hotfix to solve the issue? Regards, Owen Link to comment Share on other sites More sharing options...
Deputy Sheriffs The Dude 6537 Posted April 13, 2015 Deputy Sheriffs Share Posted April 13, 2015 What platform do you use? FSX, FSX SE or P3D? And what setting is your turb and wind turb in ASN? Thanks Link to comment Share on other sites More sharing options...
kdt 6 Posted April 13, 2015 Share Posted April 13, 2015 I have the same problem with A318,A319,A320 in FSX and FSX weather. mfg Klaus Link to comment Share on other sites More sharing options...
Guest Posted April 13, 2015 Share Posted April 13, 2015 Hello, Have just installed SP3 following the guidelines in the other thread i.e uninstalling SP2 and have found that I have the same engine oscillation problem that was apparent before the hotfix. In fact its a lot worse. This is the second test flight that I am making in the A319 IAE model with ASN. I have been at my cruising level for 75nm now and the engines are still oscillating between 1.2 EPR and 1.4 EPR, Throttles are correctly in the CLB setting. Exactly the same problem in the other test flight an hour or so ago, even at a lower altitude, i.e FL070 on a SID when the aircraft is not climbing or descending the throttles are oscillating the whole time which frankly makes it pretty unflyable. Any ideas on how to fix it? Am I best applying an hold hotfix to solve the issue? Regards, Owen Same here with A320 IAE and very poor performance with A321 IAE at takeoff. Best. Miquel. Link to comment Share on other sites More sharing options...
KieronMeen 3 Posted April 13, 2015 Share Posted April 13, 2015 I am getting it too on the A319, no weather. FSX. Edit: Also in the A321 Link to comment Share on other sites More sharing options...
AndyUK 7 Posted April 13, 2015 Share Posted April 13, 2015 Same issue here in both the CFM & IAE versions of the A320 and noticeably worse than in v1.21, other buses not tried yet. Using FSX with FSX weather theme set to 'Fair Weather'. Andy L Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted April 13, 2015 Aerosoft Share Posted April 13, 2015 We have not been able to see this on our test machines but we will monitor the issue. Framerate is not an issue? Link to comment Share on other sites More sharing options...
Deputy Sheriffs The Dude 6537 Posted April 13, 2015 Deputy Sheriffs Share Posted April 13, 2015 I am the only beta tester on the team that also has these problems now and then. I use FSX SE and sofar it looks like only the FSX users see this. Let's see if we can pinpoint this problem and correct it. And let's keep this topic confined to oscillations please. Link to comment Share on other sites More sharing options...
fanblade 11 Posted April 13, 2015 Share Posted April 13, 2015 Hi Aerosoft, Thanks for the new update, but alas the A319 both version is oscillating very badly. Using ASN weather and this FSX no issue with FPS. Many Thanks Link to comment Share on other sites More sharing options...
KieronMeen 3 Posted April 13, 2015 Share Posted April 13, 2015 We have not been able to see this on our test machines but we will monitor the issue. Framerate is not an issue? Steady and locked at 30fps Link to comment Share on other sites More sharing options...
raf120 1 Posted April 13, 2015 Share Posted April 13, 2015 Hello. I have the same issue. I fly A320 IAE and the plane oscilating many times just before cruising altitude FL360. I have locked 30 FPS. Weather - OPUSFSX. Link to comment Share on other sites More sharing options...
CaptOwen 3 Posted April 13, 2015 Author Share Posted April 13, 2015 Hello, If you need any more info then let me know. Ill post the ASN settings when I get a moment later. Owen Link to comment Share on other sites More sharing options...
DannyL 0 Posted April 13, 2015 Share Posted April 13, 2015 I have to confirm I have the same: FSX-SE with ASN. During the approach phase. Not during cruise and landing. Link to comment Share on other sites More sharing options...
gavinbarbara 2 Posted April 13, 2015 Share Posted April 13, 2015 Same here. Have just installed as instructed on the SP3 notification post. FSX. Tried the A318 with no weather. Framerates fine. Horrible engine oscillations. Link to comment Share on other sites More sharing options...
Joshua Che. 1601 Posted April 13, 2015 Share Posted April 13, 2015 Unzip and place in YourSim\SimObjects\Airplanes\Aerosoft Airbus A318_A319 Base\Panel_Fallback\AB_AP or YourSim\SimObjects\Airplanes\Aerosoft Airbus A320_A321 Base\Panel_Fallback\AB_AP This will reduce the sensitivity of the ATHR on the IAE engines to turbulence. ATHR.zip Link to comment Share on other sites More sharing options...
KieronMeen 3 Posted April 13, 2015 Share Posted April 13, 2015 Will that also work for CFM? Link to comment Share on other sites More sharing options...
cgentil 163 Posted April 13, 2015 Share Posted April 13, 2015 This will reduce the sensitivity of the ATHR on the IAE engines to turbulence. Will that also work for CFM? Link to comment Share on other sites More sharing options...
Dustie66 11 Posted April 13, 2015 Share Posted April 13, 2015 I have the issue of wild engines spooling up and down when ATHR is aktiv ... with both engines types on A319 and the A320 please help! Link to comment Share on other sites More sharing options...
airflyer 7 Posted April 13, 2015 Share Posted April 13, 2015 I can confirm this. CFM A319 N1 is oscillating between 40 and 80% all the time when using ATHR (no weather set). No stable flight possible for me Framerate is awesome though. I am on FSX SP2. Link to comment Share on other sites More sharing options...
Fangtooth 84 Posted April 13, 2015 Share Posted April 13, 2015 I'm very annoyed of all the problems that happen after every single service pack...How is it possible that these huge problems don't happen to beta testers but seem to affect so many customers? The Airbus is now -once again- completely unflyable Link to comment Share on other sites More sharing options...
Patrick1246 353 Posted April 13, 2015 Share Posted April 13, 2015 I am the only beta tester on the team that also has these problems now and then. I use FSX SE and sofar it looks like only the FSX users see this. Let's see if we can pinpoint this problem and correct it. And let's keep this topic confined to oscillations please. for all ASN User, try to set Turbulence Effect Scale to 20% or 30% Link to comment Share on other sites More sharing options...
LH1711 74 Posted April 13, 2015 Share Posted April 13, 2015 Same problem here Link to comment Share on other sites More sharing options...
Patrick1246 353 Posted April 13, 2015 Share Posted April 13, 2015 it would be good to answer few Questions. -Sim Version? -WX Addons? -wind and turbulence settings? -aircraft type? -engine type? -any positive change with Joshua's Fix? Link to comment Share on other sites More sharing options...
littleDave 0 Posted April 13, 2015 Share Posted April 13, 2015 I have the same issue here as well - using FSX:SE. Had no problems with 1.21, everything was fine. Made a short turn on OMDB, created a flight plan during approach, set up everything (ILS, etc.), activated ATHR and the oscillation started as soon as target speed was reached (oscillating between 20% to 80%). Aircraft was fully loaded (95% fuel), had about 190ktns while activating ATHR with 160ktns target speed, Flaps 1, 4000ft over ground. Weather: Fair weather (default theme). (I know, not very realistic, but I didn't care much about it :-) ). Framerate was between 15 and 20 FPS (playing on old gaming laptop). BTW: the performance was really improved since 1.21 - thank you for that. But with this bug flying is not really possible. Edit: To fullfill the questions above: - Sim Version: FSX:SE - WX Addons: none in use - wind and turbulence settings: fair weather theme - aircraft type: A320 - engine type: IAE - any positive change with Joshua's Fix: will try it a bit later - have to eat something first :-) Link to comment Share on other sites More sharing options...
Ozgur 0 Posted April 13, 2015 Share Posted April 13, 2015 -I'm using ASN but it happens with clear FSX weather. -I have tried with A320 CFM -Same attitude with Joshua's Fix. Engine spool up and down rapidly in order to maintain speed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.