Grahamn 1 Posted December 19, 2014 Share Posted December 19, 2014 Hi, Not sure if this is a known issue or not, but flew into LSZH today only to find ILS 14 (108.3) has localizer only, no glideslope. Hoping there may be a fix for this? Thanks, Graham. PS. now resolved. Link to comment Share on other sites More sharing options...
Deputy Sheriffs Herman 1591 Posted January 2, 2015 Deputy Sheriffs Share Posted January 2, 2015 Grahamn, please indicate how you resolved it in case someone else runs across this. Thanks! Link to comment Share on other sites More sharing options...
Patrick1246 353 Posted January 3, 2015 Share Posted January 3, 2015 maybe he changed the AFCAD, with the latest Airac, they have changed the ILS freq to 111.750 Link to comment Share on other sites More sharing options...
Deputy Sheriffs Herman 1591 Posted January 3, 2015 Deputy Sheriffs Share Posted January 3, 2015 We'll see. Then I'll be puzzled why he's getting a localizer (only) on the old freq, assuming the ident and alignment with the runway are correct. Link to comment Share on other sites More sharing options...
Tilo 2 Posted January 14, 2015 Share Posted January 14, 2015 Same here. No glide slope since December Airac. My B777 and Airbus A320 frequencies are set to the new frequency 111.75 . If the Afcad is on another frequency, how can I change the Afcad to the new one? Kind regards, Tilo Link to comment Share on other sites More sharing options...
Aerosoft Jonas S. 466 Posted January 15, 2015 Aerosoft Share Posted January 15, 2015 Hey Tilo, i have never used it but i heard it works : http://flyawaysimulation.com/downloads/files/2662/fsx-airport-design-editor-140-afcad-editor-creator/ Jonas Link to comment Share on other sites More sharing options...
pa.walty 6 Posted January 16, 2015 Share Posted January 16, 2015 I use X plane 10, Zürich Mega Airport from aereosoft and ILS 111.75 NavDataPro V501 R1 and it works. Link to comment Share on other sites More sharing options...
Aerosoft Jonas S. 466 Posted January 16, 2015 Aerosoft Share Posted January 16, 2015 I think u better not compare fsx and xplane here... Link to comment Share on other sites More sharing options...
Tilo 2 Posted January 19, 2015 Share Posted January 19, 2015 Hey Tilo, i have never used it but i heard it works : http://flyawaysimulation.com/downloads/files/2662/fsx-airport-design-editor-140-afcad-editor-creator/ Jonas Sorry for not having answered yet but I haven't found the time to test it yet. As soon as I know whether it worked, I will let you know. Kind regards, Tilo Link to comment Share on other sites More sharing options...
Tilo 2 Posted January 20, 2015 Share Posted January 20, 2015 Hi Jonas, thanks for the hint. I downloaded ADE but did not manage to get it working. It asks for a path to a SDK which I did not manage to find. Tilo Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted January 20, 2015 Deputy Sheriffs Share Posted January 20, 2015 The SDK must be installed additionaly, you'll find on one of the FSX DVDs Link to comment Share on other sites More sharing options...
Tilo 2 Posted January 23, 2015 Share Posted January 23, 2015 Well, I do not manage to install the SDK. I copied the complete SDK folder into the FSC directory on my PC. When I tried to install the SDK.exe it tells me to install SDK SP1A or SP2 first. When I entered the folder 'SP1A' and started the fsx_sdk_sp1a.exe in this folder, I get the message that I first need to install the SDK.exe in the SDK directory first. So, I am running in circles here :/ Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted January 23, 2015 Deputy Sheriffs Share Posted January 23, 2015 check this: http://www.fsdeveloper.com/wiki/index.php?title=SDK_Installation_%28FSX%29 Link to comment Share on other sites More sharing options...
Alaex 145 Posted January 28, 2015 Share Posted January 28, 2015 I flew into LSZH today to test the new ATHR of the A320 since it wasn't working properly when i noticed i had no ILS on the RWY 14. I have the latest AIRAC 1501 and tuned in the frequency 111.75. but no ILS. After landing i stayed on the RWY 14 and entered the old frequency 108.30 and there was my missing ILS.Why is it such a huge deal for Aerosoft to provide the customers with the newest AFCAD? I am not willing to change every ILS with the Aircraft Design Editor all by myself: You should make a library with all the airports and provide the newest AFCAD for all the customers to download. Link to comment Share on other sites More sharing options...
Aerosoft Jonas S. 466 Posted January 29, 2015 Aerosoft Share Posted January 29, 2015 We cant force the developers to provide updates if they dont want to. If they provide updates all is fine, but if they dont like to theres not much we can do about. Jonas Link to comment Share on other sites More sharing options...
Alaex 145 Posted January 29, 2015 Share Posted January 29, 2015 Thanks for your answer, but i am not okay with that. It is so much easier for the developer to edit the ILS (or whatever) than for the users. I do not even have a clue which file i should open to change the ILS frequencies and i believe i am not the only one who has difficulties using the Airport Design Editor. AGAIN: Aerosoft should make a library with all the airports and their newest AFCAD. This would be awesome and i think very much appreaciated by most of the customers. Link to comment Share on other sites More sharing options...
srcooke 422 Posted January 29, 2015 Share Posted January 29, 2015 For those of you having difficulties getting to grips with ADE Flight1 have a commercial product Airport Facilitator X that you may find easier to use. Link to comment Share on other sites More sharing options...
Deputy Sheriffs jrotaetxe 242 Posted January 29, 2015 Deputy Sheriffs Share Posted January 29, 2015 Thanks for your answer, but i am not okay with that. It is so much easier for the developer to edit the ILS (or whatever) than for the users.I do not even have a clue which file i should open to change the ILS frequencies and i believe i am not the only one who has difficulties using the Airport Design Editor.AGAIN: Aerosoft should make a library with all the airports and their newest AFCAD. This would be awesome and i think very much appreaciated by most of the customers.Perhaps you should be more proactive...I am SURE a guy able to pilot a compelx machine in the simulator is able to change the ILS of an airport, and, even more, share it with others.And if you are able to request the effort to do that to Aerosoft, I am sure you are willing to do it yourself for the same reward.Regards Link to comment Share on other sites More sharing options...
Alaex 145 Posted January 29, 2015 Share Posted January 29, 2015 Then please for gods sake someone tell me which of the .bgl files i have to open. Link to comment Share on other sites More sharing options...
Aerosoft Jonas S. 466 Posted January 29, 2015 Aerosoft Share Posted January 29, 2015 You can use our download section of course to share the edited AFCAD files! Jonas Link to comment Share on other sites More sharing options...
Deputy Sheriffs jrotaetxe 242 Posted January 29, 2015 Deputy Sheriffs Share Posted January 29, 2015 Alex. I will help you this afternoon, ok?No results guaranteed, but let's try.Regards Link to comment Share on other sites More sharing options...
Alaex 145 Posted January 29, 2015 Share Posted January 29, 2015 Great! Thank you very much Very much appreciated! Link to comment Share on other sites More sharing options...
Deputy Sheriffs jrotaetxe 242 Posted January 29, 2015 Deputy Sheriffs Share Posted January 29, 2015 I like this software to do this kind of things...http://www.zbluesoftware.com/fsxplanner/Freeware, (as ADE, by the way) and easy to use...Regards Link to comment Share on other sites More sharing options...
Alaex 145 Posted January 29, 2015 Share Posted January 29, 2015 I installed FSX Planner, opened it and then i clicked on FILE -> Open Airport BGL... Then i went to my FSX Main Folder/aerosoft/Mega Airport Zurich 2012/Scenery there are two .bgl files beginning with "AF2" AF2_LSZH_NE-SW.BGL AF2_LSZH_NW-SE.BGL and i figured out that these are the only files i can open with the FSX Planner. The other files give me an error like "no airport in this file". Now there is LSZH on my display and i went to display and disabled everything except the ILS and the markers. Then i went to options and under "Navigation" on order to edit the approaches. It does not show any. On the left corner there is my RWY Data but there is no ILS or FREQUENCY. Where can i find this part?? Link to comment Share on other sites More sharing options...
Deputy Sheriffs jrotaetxe 242 Posted January 29, 2015 Deputy Sheriffs Share Posted January 29, 2015 I have installed the zurich right now. Do not have NW_SE but only NE-SW... In tools I select cursor ant then "click" on the ILS feather I am interested in... and Voilá... Is unlock the ILS DATA, edit the freq, lock again, compile and save the new bgl under a new name. Then change the original to a bglold and done... And I beg you to be so kind as to attach the new one to your next post... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.