Jump to content

Recommended Posts

Hallo,

ich bin neu hier im Forum und habe ein Problem mit der Installation von "SimpleSeason".

Meine XP Version ist die 10.31.

Habe alles wie hier beschrieben durchgeführt , leider ohne Erfolg.

Zitat : "

2. Herzstück: Das Simple Seasons-Plugin

1. Python und das Python Script Interface muss installiert sein. Beide Sachen werden ja für eine Vielzahl von Plugins genutzt (z.B. die Ground Services), daher ist es vielleicht schon installiert. Wenn nicht: Python gibt es hier: http://www.python.org/download/ (für XP 10.20 müssen sowohl die 32- als auch die 64-Bit-Version installiert werden, in 2 verschiedene Ordner; ich empfehle außerdem Python 2.7) und das Interface hier: http://www.xpluginsd...e_downloads.htm

2. Das "Simple Seasons" Plugin muss heruntergeladen werden: http://forums.x-plan...&showfile=18061 Es muss dann in den Ordner "Resources/Plugins/PythonScripts" installiert werden. Eine ausführliche PDF-Anleitung erklärt das.

3. X-Plane muss gestartet werden.

4. Es muss nun je nach Rechnergeschwindigkeit bis zu 20 - 30 Minuten gewartet werden, während SImple Seasons arbeitet. Es werden im Custom Scenery-Ordner Kopien (nicht physisch, sondern als Verweis) auf Default-Texturen angelegt, und da es sich um Hunderte Dateien handelt, und Simple Seasons für 4 Jahreszeiten vorbereitet ist, dauert das seine Zeit. X-Plane ist NICHT abgestürzt, es dauert wirklich so lange.

5. Anschließend ist X-Plane neu zu starten, damit die gerade erstellten Szenerien (die alle mit zzzzzz beginnen; Ordnernamen NICHT umbenennen!) genutzt werden können.

6. Nun einfach mal zum Test die Zeit auf Januar stellen und die Temperatur auf unter 0, und den Flughafen neu laden, und theoretisch sollten dann Wintertexturen sichtbar sein.

Simple Seasons sorgt auch dafür, dass bei dem Flug von einer kalten in eine warme Region in letzterer keine Wintertexturen mehr sichtbar sind. Und wie gesagt, es ist auch für andere Jahreszeiten vorbereitet, d.h. wenn man Herbsttexturen hätte, würden die auch angezeigt werden. Wie man eigene Textursets installiert, wird auch in der PDF-Anleitung erklärt. Die Wintertexturen nutzen derzeit die (wenigen) XP-Standard-Schneetexturen, die XP in hohen Gebirgen verwendet. "

Habe Python 27, sowie die Versionen Python 33 ( 32 und 64 Bit Variante installiert), Pythoninterface sowie auch "xreloaded 1.1 ".

Die Plugin - Installation wurde durchgeführt aber wie gesagt leider keine Winterdarstellung.

Ich bedanke mich schonmal im Vorraus für die Hilfe.

Grüße Marc

Link to comment
Share on other sites

Hallo Marc,

da kann es ja nun viele Fehlerquellen geben. Wie immer in solchen Fragen hänge bitte deine log.txt aus dem X-Plane-Verzeichnis an deinen Post an. Mit der sind oft schon verschiedene Aussagen über mögliche Probleme möglich.

Link to comment
Share on other sites

Und hieran liegt es nicht?

January - March: winter in the north...summer in the south

April - June: spring in the north ...fall in the south

July - September: summer in the north...winter in the south

October - December: fall in the north...spring in the south

If the temperature at your airport is below -2° C it will set winter too

If it is winter and the temperature higher than +2° it will switch to autumn.

Wir haben November. Und kalt genug isses imho auch noch nicht für Winter.

Oder ist da inzwischen was anders? (Ich nutze das nicht.)

Link to comment
Share on other sites

Vielen Dank für die Hilfestellung.

Anbei die Datei " log.txt"

log.txt for X-Plane 10.31r3 (64-bit build 103103) compiled on Nov 7 2014 16:44:36
This log file is generated automatically by Laminar Research applications and contains diagnostics about your graphics hardware, installation, and any error conditions.
If you need to contact tech support or file a bug, please send us this file. NOTE: this file is rewritten every time you start ANY of your X-System applications.
Windows 6.2 (build 9200/2)
This is a 64-bit version of Windows.
CPU type: 8664
Physical Memory (total for computer): 8464478208
Maximum Virtual Memory (for X-Plane only): 140737488224256
CPU 0: Intel® Core i5-4200M CPU @ 2.50GHz Speed (mhz): 2494
CPU 0: Intel® Core i5-4200M CPU @ 2.50GHz Speed (mhz): 2494
CPU 0: Intel® Core i5-4200M CPU @ 2.50GHz Speed (mhz): 2494
CPU 0: Intel® Core i5-4200M CPU @ 2.50GHz Speed (mhz): 2494
X-System folder:'C:\Program Files (x86)/Steam/steamapps/common/X-Plane 10/', case sensitive=0
WGL_ARB_buffer_region WGL_ARB_create_context WGL_ARB_create_context_profile WGL_ARB_create_context_robustness WGL_ARB_extensions_string WGL_ARB_make_current_read WGL_ARB_multisample WGL_ARB_pbuffer WGL_ARB_pixel_format WGL_ARB_pixel_format_float WGL_ARB_render_texture WGL_ATI_pixel_format_float WGL_EXT_create_context_es_profile WGL_EXT_create_context_es2_profile WGL_EXT_extensions_string WGL_EXT_framebuffer_sRGB WGL_EXT_pixel_format_packed_float WGL_EXT_swap_control WGL_EXT_swap_control_tear WGL_NVX_DX_interop WGL_NV_DX_interop WGL_NV_DX_interop2 WGL_NV_delay_before_swap WGL_NV_float_buffer WGL_NV_multisample_coverage WGL_NV_render_depth_texture WGL_NV_render_texture_rectangle
OpenGL Vendor : NVIDIA Corporation
OpenGL Render : GeForce GT 750M/PCIe/SSE2
OpenGL Version : 4.4.0 NVIDIA 344.75 (440/0)
OpenGL Extensions: GL_AMD_multi_draw_indirect GL_AMD_seamless_cubemap_per_texture GL_ARB_arrays_of_arrays GL_ARB_base_instance GL_ARB_bindless_texture GL_ARB_blend_func_extended GL_ARB_buffer_storage GL_ARB_clear_buffer_object GL_ARB_clear_texture GL_ARB_color_buffer_float GL_ARB_compatibility GL_ARB_compressed_texture_pixel_storage GL_ARB_conservative_depth GL_ARB_compute_shader GL_ARB_compute_variable_group_size GL_ARB_copy_buffer GL_ARB_copy_image GL_ARB_debug_output GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_draw_buffers_blend GL_ARB_draw_indirect GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced GL_ARB_enhanced_layouts GL_ARB_ES2_compatibility GL_ARB_ES3_compatibility GL_ARB_ES3_1_compatibility GL_ARB_explicit_attrib_location GL_ARB_explicit_uniform_location GL_ARB_fragment_coord_conventions GL_ARB_fragment_layer_viewport GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_no_attachments GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_geometry_shader4 GL_ARB_get_program_binary GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_indirect_parameters GL_ARB_instanced_arrays GL_ARB_internalformat_query GL_ARB_internalformat_query2 GL_ARB_invalidate_subdata GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multi_bind GL_ARB_multi_draw_indirect GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_program_interface_query GL_ARB_provoking_vertex GL_ARB_robust_buffer_access_behavior GL_ARB_robustness GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_seamless_cubemap_per_texture GL_ARB_separate_shader_objects GL_ARB_shader_atomic_counters GL_ARB_shader_bit_encoding GL_ARB_shader_draw_parameters GL_ARB_shader_group_vote GL_ARB_shader_image_load_store GL_ARB_shader_image_size GL_ARB_shader_objects GL_ARB_shader_precision GL_ARB_query_buffer_object GL_ARB_shader_storage_buffer_object GL_ARB_shader_subroutine GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shading_language_420pack GL_ARB_shading_language_include GL_ARB_shading_language_packing GL_ARB_shadow GL_ARB_sparse_texture GL_ARB_stencil_texturing GL_ARB_sync GL_ARB_tessellation_shader GL_ARB_texture_border_clamp GL_ARB_texture_buffer_object GL_ARB_texture_buffer_object_rgb32 GL_ARB_texture_buffer_range GL_ARB_texture_compression GL_ARB_texture_compression_bptc GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_cube_map_array GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_gather GL_ARB_texture_mirror_clamp_to_edge GL_ARB_texture_mirrored_repeat GL_ARB_texture_multisample GL_ARB_texture_non_power_of_two GL_ARB_texture_query_levels GL_ARB_texture_query_lod GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_rgb10_a2ui GL_ARB_texture_stencil8 GL_ARB_texture_storage GL_ARB_texture_storage_multisample GL_ARB_texture_swizzle GL_ARB_texture_view GL_ARB_timer_query GL_ARB_transform_feedback2 GL_ARB_transform_feedback3 GL_ARB_transform_feedback_instanced GL_ARB_transpose_matrix GL_ARB_uniform_buffer_object GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_attrib_64bit GL_ARB_vertex_attrib_binding GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_vertex_type_10f_11f_11f_rev GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_viewport_array GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_texture_float GL_ATI_texture_mirror_once GL_S3_s3tc GL_EXT_texture_env_add GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_Cg_shader GL_EXT_depth_bounds_test GL_EXT_direct_state_access GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXTX_framebuffer_mixed_formats GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_shader_objects GL_EXT_separate_specular_color GL_EXT_shader_image_load_store GL_EXT_shader_integer_mix GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture3D GL_EXT_texture_array GL_EXT_texture_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_latc GL_EXT_texture_compression_rgtc GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_shared_exponent GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_texture_storage GL_EXT_texture_swizzle GL_EXT_timer_query GL_EXT_transform_feedback2 GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_EXT_vertex_attrib_64bit GL_EXT_import_sync_object GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_KHR_debug GL_KTX_buffer_region GL_NV_bindless_multi_draw_indirect GL_NV_bindless_multi_draw_indirect_count GL_NV_bindless_texture GL_NV_blend_equation_advanced GL_NV_blend_square GL_NV_compute_program5 GL_NV_conditional_render GL_NV_copy_depth_to_color GL_NV_copy_image GL_NV_depth_buffer_float GL_NV_depth_clamp GL_NV_draw_texture GL_NV_ES1_1_compatibility GL_NV_ES3_1_compatibility GL_NV_explicit_multisample GL_NV_fence GL_NV_float_buffer GL_NV_fog_distance GL_NV_fragment_program GL_NV_fragment_program_option GL_NV_fragment_program2 GL_NV_framebuffer_multisample_coverage GL_NV_geometry_shader4 GL_NV_gpu_program4 GL_NV_gpu_program4_1 GL_NV_gpu_program5 GL_NV_gpu_program5_mem_extended GL_NV_gpu_program_fp64 GL_NV_gpu_shader5 GL_NV_half_float GL_NV_light_max_exponent GL_NV_multisample_coverage GL_NV_multisample_filter_hint GL_NV_occlusion_query GL_NV_packed_depth_stencil GL_NV_parameter_buffer_object GL_NV_parameter_buffer_object2 GL_NV_path_rendering GL_NV_pixel_data_range GL_NV_point_sprite GL_NV_primitive_restart GL_NV_register_combiners GL_NV_register_combiners2 GL_NV_shader_atomic_counters GL_NV_shader_atomic_float GL_NV_shader_buffer_load GL_NV_shader_storage_buffer_object GL_NV_texgen_reflection GL_NV_texture_barrier GL_NV_texture_compression_vtc GL_NV_texture_env_combine4 GL_NV_texture_multisample GL_NV_texture_rectangle GL_NV_texture_shader GL_NV_texture_shader2 GL_NV_texture_shader3 GL_NV_transform_feedback GL_NV_transform_feedback2 GL_NV_vertex_array_range GL_NV_vertex_array_range2 GL_NV_vertex_attrib_integer_64bit GL_NV_vertex_buffer_unified_memory GL_NV_vertex_program GL_NV_vertex_program1_1 GL_NV_vertex_program2 GL_NV_vertex_program2_option GL_NV_vertex_program3 GL_NVX_conditional_render GL_NVX_gpu_memory_info GL_NVX_nvenc_interop GL_NV_shader_thread_group GL_NV_shader_thread_shuffle GL_KHR_blend_equation_advanced GL_SGIS_generate_mipmap GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SGIX_shadow GL_SUN_slice_accum GL_WIN_swap_hint WGL_EXT_swap_control
threaded_avail : 1 dis_fog_avail : 1 instance_avail : 1 pbo_avail : 1
aniso_avail : 1 gshader_avail : 1 buniform_avail : 1 shad_lod_avail : 1
gpu_shad4_avail : 1 framebuf_avail : 1 frameblit_avail : 1 drawbuf2_avail : 1
tex_float_avail : 1 packed_stencil : 1 texture_rg : 1 framebuffer_srgb : 1
copy_buf_avail : 1 pinned_avail : 0 timer_avail : 1 sync/fence : 1
max tex units : 32 (32/8)
max iso filtering: 16.000000
max texture size : 16384 (hardware limit)
max point size : 189.875000
idx in vram : 1
GLSL Version :4.40 NVIDIA via Cg compiler/440
first-gen shaders: 0
(16/4096/124/192/32/2048/2048)
This video card is: DX10 or 11 - With instancing
Note: X-Plane preferences are set to enable FSAA, but it is disabled by the driver control panel.
CPU count : 4
OpenAL loaded: Resources/dlls/64/openal32.dll
OpenAL devices: OpenAL Soft
Open AL default device:OpenAL Soft
OpenAL vendor : OpenAL Community
OpenAL renderer : OpenAL Soft
OpenAL version : 1.1
OpenAL hardware : OpenAL Soft
OpenAL extensions: ALC_ENUMERATE_ALL_EXT ALC_ENUMERATION_EXT ALC_EXT_CAPTURE ALC_EXT_DEDICATED ALC_EXT_disconnect ALC_EXT_EFX ALC_EXT_thread_local_context ALC_SOFT_loopback AL_EXT_ALAW AL_EXT_DOUBLE AL_EXT_EXPONENT_DISTANCE AL_EXT_FLOAT32 AL_EXT_IMA4 AL_EXT_LINEAR_DISTANCE AL_EXT_MCFORMATS AL_EXT_MULAW AL_EXT_MULAW_MCFORMATS AL_EXT_OFFSET AL_EXT_source_distance_model AL_LOKI_quadriphonic AL_SOFT_buffer_samples AL_SOFT_buffer_sub_data AL_SOFTX_deferred_updates AL_SOFT_direct_channels AL_SOFT_loop_points
Fetching plugins for C:\Program Files (x86)/Steam/steamapps/common/X-Plane 10/Resources/plugins
Loaded: C:\Program Files (x86)/Steam/steamapps/common/X-Plane 10/Resources/plugins/PluginAdmin/64/win.xpl (xpsdk.examples.pluginadmin).
PythonInterfaceVersionNumber = 2.73.06
Loaded: C:\Program Files (x86)/Steam/steamapps/common/X-Plane 10/Resources/plugins/PythonInterface/64/win.xpl (sandybarbour.projects.pythoninterface).
X-Reloaded: started.
Loaded: C:\Program Files (x86)/Steam/steamapps/common/X-Plane 10/Resources/plugins/xreloaded/64/win.xpl (barbarossa.xreloaded.1.1b1).
X-Reloaded: enabled
==== CHANGING LANGUAGE TO: Deutsch. ====
ERROR: language file line 'radial: ====Radial:' does not have the same trailing spaces.
ERROR: language file line 'distance: ====Entfernung:' does not have the same trailing spaces.
ERROR: language file line 'ELLIPSE====' missing right side translation.
ERROR: language file line 'Enter the arm and maximum weight of the passengers and cargo that you expect to carry here.====' missing right side translation.
ERROR: language file line 'Then go to the next tab over to see the range of weight and balance you could encounter in flight!====' missing right side translation.
ERROR: language file line 'NOTE: THIS IS ONLY FOR WEIGHT AND BALANCE INVESTIGATION FOR YOU, AND DOES NOT AFFECT X-PLANE IN ANY WAY!====' missing right side translation.
ERROR: language file line 'Each red dot is a possible loading configuration. See here what range of weight and CG you could see in flight!====' missing right side translation.
ERROR: language file line 'Enter weights below to see the weight and CG for that load.====' missing right side translation.
ERROR: language file line 'cg|-at current test====' missing right side translation.
ERROR: language file line 'weight|-at current test====' missing right side translation.
ERROR: language file line 'fwd limit====' missing right side translation.
ERROR: language file line '|aft limit====' missing right side translation.
ERROR: language file line 'wgt min====' missing right side translation.
ERROR: language file line '|wgt max====' missing right side translation.
ERROR: language file line '-steers with gear | { Check this to let the light steer with the landing gear steering!====' missing right side translation.
ERROR: language file line '-aoa|====' missing right side translation.
ERROR: language file line 'Spoolup/Boost====' missing right side translation.
ERROR: language file line '|has verbal 500 AGL callout { ====' missing right side translation.
ERROR: language file line 'ang{ This is the angle of the lowest value we can display. You can wrap from 0 to 720 for 2 rotations, or 0 to NEGATIVE 360 to go backwards once, for example! Enter any angles you like, even negative ones, and even values well greater than 360. Zero is obviously the top of the instrument.====' missing right side translation.
ERROR: language file line 'RAM-inlet pressure recovery|(fraction) { This is the percentage of the RAM air pressure that your inlet manages to recover to increase engine power.====' missing right side translation.
ERROR: language file line 'prop mass ratio|(to solid aluminum) { This is how heavy the prop or rotor is compared to one made of pure aluminum. Composite props, for example, are lighter. Heavier props speed up and slow down more slowly, and provide more auto-rotation ability in helicopters.====' missing right side translation.
ERROR: language file line 'minimum prop governor RPM|(engine RPM) { If you pull the prop control back, you can lower the engine RPM to this setting. This does NOT include reverse or beta or feathered... enter the prop pitches for those things over to the left, and whatever rpm you get as a result, you get.====' missing right side translation.
ERROR: language file line 'max efficient inlet Mach|(Mach) { This is the maximum mach number at which the inlet can pass air to the engine efficiently. Above this mach number, losses in shock waves around the inlet will reduce engine efficiency.====' missing right side translation.
ERROR: language file line 'fan RPM at 100% N1|(rpm)====' missing right side translation.
ERROR: language file line '{ The prop direction will indicate which way the engine torques the craft under power. For jets, this is the compressor rotation direction.====' missing right side translation.
ERROR: language file line 'electric engine drive efficiency|(ratio) { If you have an electric engine, this percentage of the power coming from the battery that will make it to the prop.====' missing right side translation.
ERROR: language file line 'electric engine re-gen efficiency|(ratio) { If you have an electric engine with re-gen braking, enter the efficiency of that re-gen braking here, and this percentage of the power going into the prop (if any) will be loaded into the battery.====' missing right side translation.
ERROR: language file line '|CWS button adjusts altitude hold { Checking this button ON is the modern convention, used in the G-1000, for example. With this type of autopilot, you simply hold the CWS button while flying up or down in altitude mode to change the altitude selection.====' missing right side translation.
ERROR: language file line '|auto-load speed into pre-sel when ASI mode engaged { Checking this button ON is the modern convention, used in the G-1000, for example. With this type of autopilot, you simply hit the ALT button to load your current altitude.====' missing right side translation.
ERROR: language file line '|auto-load VVI into pre-sel when VVI mode engaged { Checking this button ON is the modern convention, used in the G-1000, for example. With this type of autopilot, you simply hit the ALT button to load your current altitude.====' missing right side translation.
ERROR: language file line 'has radio-alt decision-height callout|{ If you enter a decision-height into a radio altimeter in the cockpit, you will get a callout when you get to or near that altitude.====' missing right side translation.
ERROR: language file line 'has radio-alt callout advance|(ft) { SOME radio altimeters give the decision-height callout in ADVANCE of the decision-height to give you some warning. Enter that advance, in feet, here.====Radarhöhenmesser-Warnung im Voraus|(Fuß) { Manche Radarhöhenmesser rufen die Entscheidungshöhe vor dem Erreichen der Höhe aus, sozusagen als Vorwarnung. Geben Sie diese Höhendifferenz hier in Fuß ein. ' does not have the same trailing spaces.
ERROR: language file line 'TOP check to trigger MASTER CAUTION. BOTTOM check to trigger MASTER WARNING. SELECTOR for WAV FILE to play in the your aircraft's SOUNDS/CUSTOM folder.====' missing right side translation.
ERROR: language file line 'Each bus may be driven by any number of generators and batteries.====' missing right side translation.
ERROR: language file line 'If you have more buses than generators or batteries, then you will need the cross-tie always on!====' missing right side translation.
ERROR: language file line ' goes to bus #====' missing right side translation.
ERROR: language file line 'max MP|(max POWER, redline RPM, sea level, ISA)====' missing right side translation.
ERROR: language file line 'spring k per unit mass lon, lat, vert| { ====' missing right side translation.
ERROR: language file line '#====#' missing right side translation.
ERROR: language file line ' { You may, optionally, assign a dataref for a switch in the sim to drive the slider, rather than having it driven by the but_command_slider switch. NOTE: YOU SHOULD PROBABLY START ASSIGNMENTS FROM #24 AND WORK DOWN, SINCE THE PRESENCE OF BUT_COMMAND_SLIDER BUTTONS ON THE PANEL WILL START AT THE FIRST SLIDER AND WORK UP!====' missing right side translation.
ERROR: language file line 'ELEMENT SPECS (ROOT AT LEFT, TIP AT RIGHT)====' missing right side translation.
ERROR: language file line 'shadow mode | { Controls which views this object casts shadows in. You may be able to improve framerate by limiting which objects cast shadows. For example, in an airliner with small windows there is probably no need to have the cabin seat objects cast shadows in an exterior view.====' missing right side translation.
ERROR: language file line '| hi-res { Check this to use higher texture resolution on this object. This is only recommended for objects that make up the cockpit instrument panel so the instruments are sharp!====' missing right side translation.
ERROR: language file line '| pre-fill { Check this to cause X-Plane to exclude clouds behind this object. Inside the 3-d cockpit blocking out clouds can significantly improve framerate. Only do this with fully opaque, cheap-to-draw objects. If you use a translucent objects the clouds will be missing through the translucency!====' missing right side translation.
ERROR: language file line '| use LOD { Check this to honor the LOD attributes in the OBJ. By default X-Plane ignores LOD on airplanes and draws them from any distance. Enable this to use LOD. Using low LODs on tiny details of your plane improves framerate in the far view; X-Plane will simply stop drawing those details when the plane is far away.====' missing right side translation.
ERROR: language file line 'roll input to engage|(ratio)====' missing right side translation.
ERROR: language file line 'aileron trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation.
ERROR: language file line 'elevator trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation.
ERROR: language file line 'rudder trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation.
ERROR: language file line 'rotor trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation.
ERROR: language file line '|aileron trim tab adjust { 0 is centered, -1.0 is for full left aileron, +1.0 is for right aileron.====' missing right side translation.
ERROR: language file line '|elevator trim tab adjust { 0 is centered, -1.0 is for full down elevator, +1.0 is for full up elvator.====' missing right side translation.
ERROR: language file line '|rudder trim tab adjust { 0 is centered, -1.0 is for full left rudder, +1.0 is for right rudder.====' missing right side translation.
ERROR: language file line ' minimum rudder deflection time|seconds { Enter 0.0 to be able to deflect the controls as fast as the pilot can move the stick or the art stab system can command a deflection, as is the case with all manual control systems. If the plane has a hydraulic system and a max rate of control deflection, though, enter how long it takes to go from center to fully-deflected here.====Minimale Seitenruder-Auslenkzeit|Sekunden { Geben Sie 0.0 ein, wenn die Steuerflächen unmittelbar der Steuereingabe des Piloten oder des Stabilisierungssystems folgen soll, wie es bei manuellen Steuersystemen der Fall ist. Wenn das Flugzeug jedoch ein Hydrauliksystem mit einer maximalen Auslenkgeschwindigkeit besitzt, geben Sie die Zeit ein, die für die Fahrt von der Mittelstellung bis zur vollen Auslenkung benötigt wird.' does not have the same leading spaces.
ERROR: language file line '-gear castors| { Just check here if you want this gear to free-castor. Enter the steering values above if you want it to steer.====-Fahrwerklaufrollen { Gegen Sie die Steuerungswerte oben ein, wenn Sie wollen, das es steuert. ' does not have the same trailing spaces.
ERROR: language file line 'additional gear flatplate area|(square feet) { X-Plane already considers the frontal area of struts, tires, and doors in its landing gear drag estimates. BUT, in real airplanes, there is ADDITIONAL drag from the gear WELLS disrupting the airflow over the craft. Enter the effective flatplate area here associated with that drag to increase the drag associated with landing gear deployment. A Beech Baron, for example, might have 2 square feet of effective frontal area from this effect. ====Zusätzlicher Flächenwiderstand|(Fuß²) { X-Plane bezieht grundsätzlich die Frontalfläche von Fahrwerkbeinen, Reifen und Schachttüren in die Berechnung des Luftwiderstands schon mit ein. Aber die Fahrwerksschächte erzeugen in der Realität zusätzlichen Widerstand, da sie den Fluss stören. Hier können Sie die äquivalente Fläche eingeben, die den Widerstand auf entsprechende Weise wie die Schachtöffnung bei ausgefahrenem Fahrwerk erhöhen würde. Eine Beech Baron kann z.B. 2 Quadrat-Fuß äquivalente Frontalfläche haben, die auf diesen Effekt zurückgeht.' does not have the same trailing spaces.
ERROR: language file line 'deflection when under zero load|==== Auslenkung unter Nulllast' does not have the same leading spaces.
ERROR: language file line '-tank #====Tank Nr. ' does not have the same trailing spaces.
ERROR: language file line 'Prop ====Propeller' does not have the same trailing spaces.
ERROR: language file line 'Misc Wing ====Diverse Flügel' does not have the same trailing spaces.
ERROR: language file line ' warhead type { Do you really need an explanation?====Sprengkopftyp { Brauchen Sie wirklich eine Erklärung?' does not have the same leading spaces.
ERROR: language file line 'coeff-20====' missing right side translation.
ERROR: language file line 'coeff-180====' missing right side translation.
ERROR: language file line 'finite-L/D====' missing right side translation.
ERROR: language file line 'AR|to use for L/D estimation at right and below====' missing right side translation.
ERROR: language file line 'e|to use for L/D estimation at right and below====' missing right side translation.
ERROR: language file line 'Departure ICAO should be blank when filing for a popup clearance.====' missing right side translation.
ERROR: language file line 'm====m' missing right side translation.
ERROR: language file line 'a multiplayer to plane #====einem® Mitspieler(in), Flugzeug Nr. ' does not have the same trailing spaces.
ERROR: language file line 'Above ====Oberhalb von' does not have the same trailing spaces.
ERROR: language file line 'G-units. We will try to give you this G-load by moving the pitch controls ====G-Faktor. Dieser wird durch Bewegung des Höhenruders nachgeahmt' does not have the same trailing spaces.
ERROR: language file line ' ailn-elev-rudd====Quer-/Höhen-/Seitenruder' does not have the same leading spaces.
ERROR: language file line 'www.X-Plane.com for tech support contact info!==== Besuchen Sie bei Problemen www.X-Plane.com!' does not have the same leading spaces.
Initializing off screen memory.
Initializing off screen memory complete.
I found the following scenery packages (prioritized in this order):
0 Custom Scenery/Aerosoft - EBBR Brussels/
1 Custom Scenery/Aerosoft - EDDF Frankfurt/
2 Custom Scenery/Aerosoft - EDDH Hamburg/
3 Custom Scenery/Aerosoft - EDDK Cologne/
4 Custom Scenery/Aerosoft - EDDM Munich/
5 Custom Scenery/Aerosoft - EDDS Stuttgart/
6 Custom Scenery/Aerosoft - EDDT Berlin Tegel/
7 Custom Scenery/Aerosoft - EDDV Hannover/
8 Custom Scenery/Aerosoft - EDLP Paderborn-Lippstadt/
9 Custom Scenery/Aerosoft - EGBB Birmingham/
10 Custom Scenery/Aerosoft - EGKK London-Gatwick/
11 Custom Scenery/Aerosoft - EGLL Heathrow/
12 Custom Scenery/Aerosoft - EGPF Glasgow/
13 Custom Scenery/Aerosoft - EGSS London-Stansted/
14 Custom Scenery/Aerosoft - EIDW Dublin/
15 Custom Scenery/Aerosoft - LEBL Barcelona/
16 Custom Scenery/Aerosoft - LEMD Madrid/
17 Custom Scenery/Aerosoft - LFMN Nice Cote d Azur X/
18 Custom Scenery/Aerosoft - LFPG Paris CDG/
19 Custom Scenery/Aerosoft - LFPO Paris Orly/
20 Custom Scenery/Aerosoft - LPFR Faro/
21 Custom Scenery/Aerosoft - LSGG Genf/
22 Custom Scenery/Global Airports/
23 Custom Scenery/KSEA Demo Area/
24 Custom Scenery/KSEA Demo Terrain/
25 Custom Scenery/LOWI Demo Area/
26 Global Scenery/Bug Fixes/
27 Global Scenery/Extra Islands/
28 Global Scenery/Recuts 1030/
29 Global Scenery/X-Plane 10 Global Scenery/
30 Resources/default scenery/1000 autogen/
31 Resources/default scenery/1000 decals/
32 Resources/default scenery/1000 forests/
33 Resources/default scenery/1000 roads/
34 Resources/default scenery/1000 urban terrain/
35 Resources/default scenery/1000 world terrain/
36 Resources/default scenery/700 roads/
37 Resources/default scenery/900 beaches/
38 Resources/default scenery/900 europe objects/
39 Resources/default scenery/900 forests/
40 Resources/default scenery/900 roads/
41 Resources/default scenery/900 us objects/
42 Resources/default scenery/900 world object placeholders/
43 Resources/default scenery/airport decals/
44 Resources/default scenery/airport scenery/
45 Resources/default scenery/default apt dat/
46 Resources/default scenery/default atc/
47 Resources/default scenery/sim objects/
Could not find tile 51 name is ^u
Could not find tile 48 name is close-frame
(in sign '{@L}M{^u}{@Y}{^r}C' from airport ESSV)
Syntax error - missing closing brace.
(in sign '{@L}A{^r]' from airport ESSV)
Syntax error - unknown glyph (
Syntax error - unknown glyph @
Syntax error - unknown glyph )
(in sign '{@L}A(@R)13-31' from airport KBAZ)
Could not find tile 37 name is -
(in sign '{@L}A(@R)13-31' from airport KBAZ)
Syntax error - unknown glyph at ^ul}A{^r}
Syntax error - unknown glyph at A{^r}
Parse error: no closing brace.
(in sign '{@Y}{^l}A{@L}F{@Y}F{^ul}A{^r}' from airport KBGM)
Syntax error - unknown glyph at 10-28}
Parse error: no closing brace.
(in sign '{@L}P{@R}{10-28}' from airport KBGM)
Syntax error - unknown glyph at ^i}B{@L}A{@@}{@L}A
Syntax error - unknown glyph at B{@L}A{@@}{@L}A
Syntax error - unknown glyph at A{@@}{@L}A
Syntax error - unknown glyph at {@L}A
Syntax error - missing closing brace.
(in sign '{@Y}{^i}B{@L}A{@@}{@L}A' from airport KBUF)
Syntax error - unknown glyph p
(in sign '{@L}p{@@}{@L}P' from airport KBUF)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}A6{@L}A{@Y}32-14{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}A5{@L}A{@Y}A6{@L}|{@Y}32-14{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}G{^ru}{@L}A{@Y}A4{^lu}{@L}|{@Y}32-14{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}B{@L}A{@Y}TERM-B-FBO{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}A2{@L}A{@Y}N-FBO{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}N-FBO{@L}A{@Y}A-C{^u}{@L}|{@Y}A2{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}O-FBO{@L}A{@Y}A-A2-C{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}P-FBO{@L}A{@Y}A-A2-C{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}B-TERM{@L}A{@Y}B{^ru}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}G{^ru}{@L}A{@Y}{^lu}G3-B3{@L}|{@Y}A4{^rd}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
(in sign '{@B}|{@Y}{^rd}A-FBO{@L}B{@Y}A{^lu}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}B{@Y}{^rd}F{@L}|{@Y}B2-G4{^l}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}B{@Y}{^r}F2{@L}|{@Y}B1{^l}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}B{@Y}{^ld}C{@L}|{@R}19-01{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}B{@Y}{^lu}F2{@L}|{@Y}B1{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}B{@Y}{^lu}F{@L}|{@Y}B2-G4{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}B{@Y}{^lu}A-FBO{@L}|{@Y}A{^rd}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}B{@Y}{^l}B3-TERM{@L}|{@Y}B3-G3-A4{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^u}FBO{@L}|{@Y}{^l}A-TERM-FBO{@L}A2{@Y}A{@L}|{@Y}32-14{^r}' from airport KFRG)
Syntax error - unknown glyph (
Syntax error - unknown glyph ^
Syntax error - unknown glyph u
Syntax error - unknown glyph )
(in sign '{@L}C{@R}14-32{@L}|{@Y}A2(^u)' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}C{@R}14-32{@L}|{@Y}A2(^u)' from airport KFRG)
Syntax error - unknown glyph (
Syntax error - unknown glyph ^
Syntax error - unknown glyph u
Syntax error - unknown glyph )
(in sign '{@L}C{@Y}A2-FBO(^u)' from airport KFRG)
Syntax error - unknown glyph (
Syntax error - unknown glyph ^
Syntax error - unknown glyph r
Syntax error - unknown glyph )
(in sign '{@L}C{@Y}M{@R}19-01{@L}|{@Y}G(^r)' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}C{@Y}M{@R}19-01{@L}|{@Y}G(^r)' from airport KFRG)
Syntax error - unknown glyph (
Syntax error - unknown glyph ^
Syntax error - unknown glyph r
Syntax error - unknown glyph )
(in sign '{@L}C{@Y}F2-B{^r}19-01(^r)' from airport KFRG)
Could not find tile 37 name is -
(in sign '{@L}D{R}32-14{@Y}A-TERM-FBO{^r}' from airport KFRG)
Could not find tile 37 name is -
Could not find tile 37 name is -
Could not find tile 51 name is ^u
Could not find tile 48 name is close-frame
(in sign '{@L}D{Y}D1-D2-G{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}C-A2-FBO{@L}F{@Y}C-14-01{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}F{@Y}F1{^ru}{@L}|{@Y}C{^u}' from airport KFRG)
Syntax error - unknown glyph at ru}
Parse error: no closing brace.
(in sign '{@L}|{@Y}{^ld}B{@L}F{@Y}B-FBO-TERM{ru}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}B{@L}F{@Y}B-FBO-TERM{ru}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{^ld}A4{@L}|{@Y}{^lu}A{^rd}{@L}G{@Y}G3-B3-TERM{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}B{@R}01-19{@Y}B{^ru}{@L}G{@Y}FBO-TERM{@L}|{@Y}19-01{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}G{@L}G5{@R}19-01' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}G-5-6-7{@L}|{@Y}01-19{@L}G4{@Y}D{@L}|{@Y}32-14{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}G4{^r}{@L}G{@Y}G-5-6-7{@L}|{@Y}01-19{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^lu}B{@R}01-19{@Y}B{^rd}{@L}G{@Y}G4-5-6-7{@L}|{@Y}01-19{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}G3-B3-TERM{@L}G{@Y}{^lu}B{^rd}{@L}|{@Y}A4{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}G{@Y}G1-G2{@L}|{@Y}A{@L}|{@Y}14-32{@L}|{@Y}D{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}G1{@L}19{@Y}T1{^ru}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}G3-G-A4-A{@L}19{@Y}T2-TERM{^r}' from airport KFRG)
Syntax error - unknown glyph at {^rd}{@L}|{@Y}TERM-NEXT{^r}
Syntax error - unknown glyph at {@L}|{@Y}TERM-NEXT{^r}
Syntax error - unknown glyph at |{@Y}TERM-NEXT{^r}
Syntax error - unknown glyph at TERM-NEXT{^r}
Parse error: no closing brace.
(in sign '{@L}19{@Y}{^ru}B{^rd}{@L}|{@Y}FBO{{^rd}{@L}|{@Y}TERM-NEXT{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}19{@Y}{^ru}B{^rd}{@L}|{@Y}FBO{{^rd}{@L}|{@Y}TERM-NEXT{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}B{^r}{@L}B2{@Y}F{^ru}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}G4{@L}19{@Y}B2-F-C{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}M{@L}01{@Y}G7{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}B2{@L}01{@Y}G4{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^lu}A{@L}01{@Y}A{^rd}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}B3{@L}01{@Y}G3{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}B4{@L}01{@Y}G1{^r}' from airport KFRG)
Could not find tile 49 name is ^l
(in sign '{@L}14{^l}D2' from airport KFRG)
Could not find tile 55 name is ^ld
Could not find tile 54 name is ^ru
Could not find tile 48 name is close-frame
(in sign '{@L}14{^ld}G{^ru}' from airport KFRG)
Could not find tile 55 name is ^ld
Could not find tile 54 name is ^ru
Could not find tile 48 name is close-frame
(in sign '{@L}14{^ld}B{^ru}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}G{@L}32{@Y}G{^ru}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}A5{@L}32{@Y}D1{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}N{@Y}{^l}A{^r}{@L}|{@Y}A2-C{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}A{^ru}{@L}G3{@Y}{^l}G{^r}{@L}|{@Y}A4{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}G{@L}G4{@R}19-01' from airport KFRG)
Syntax error - unknown glyph at u}G4-5-6-7{@L}B2{@R}19-01
Syntax error - unknown glyph at G4-5-6-7{@L}B2{@R}19-01
Syntax error - unknown glyph at B2{@R}19-01
Syntax error - missing closing brace.
(in sign '{@L}|{@Y}{u}G4-5-6-7{@L}B2{@R}19-01' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{u}G4-5-6-7{@L}B2{@R}19-01' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^u}G-A4{@L}A{@R}19-01' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^u}G3-A-A4{@L}B3{@R}19-01' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^lu}B3-G3-A-A4{@L}T2{@Y}{^l}B{^r}' from airport KFRG)
Syntax error - unknown glyph (
Syntax error - unknown glyph @
Syntax error - unknown glyph )
Syntax error - unknown glyph at ^ul}
Parse error: no closing brace.
(in sign '{@L}B4(@R)19-01{@Y}G1{^ul}' from airport KFRG)
Could not find tile 37 name is -
(in sign '{@L}B4(@R)19-01{@Y}G1{^ul}' from airport KFRG)
Syntax error - unknown glyph at @Y^rd}A2
Syntax error - missing closing brace.
(in sign '{@Y,^lu}A2{^ld}A3{@L}A{@Y^rd}A2' from airport KFTW)
Syntax error - unknown glyph at ^R}D{@L}D
Syntax error - unknown glyph at D{@L}D
Syntax error - missing closing brace.
(in sign '{@R}24-24{r1}{@Y}{@@}{^R}D{@L}D' from airport KGRB)
Syntax error - unknown glyph at ^R}JET
Syntax error - missing closing brace.
(in sign '{@Y}{^R}JET' from airport KGRB)
Syntax error - unknown glyph at ^ur}|D{^r}{@@}{^u}RAMP{@L}D1
Syntax error - unknown glyph at |D{^r}{@@}{^u}RAMP{@L}D1
Syntax error - unknown glyph at {@@}{^u}RAMP{@L}D1
Syntax error - unknown glyph at {^u}RAMP{@L}D1
Syntax error - unknown glyph at RAMP{@L}D1
Syntax error - missing closing brace.
(in sign '{@Y}{^l}D{@L}D1{@Y}D1{^u}|B{^ur}|D{^r}{@@}{^u}RAMP{@L}D1' from airport KGRB)
Syntax error - unknown glyph at ^ul}
Parse error: no closing brace.
(in sign '{@Y}{^l}D3|D2{^ul}' from airport KGRB)
Syntax error - unknown glyph at ^ur}
Parse error: no closing brace.
(in sign '{@L}M{@R}06-24{r1}{@Y}{@@}{^u}M{@L}M{@Y}D{^r}|J{^ur}' from airport KGRB)
Syntax error - unknown glyph at ^ur}
Parse error: no closing brace.
(in sign '{@L}M{@R}06-24{r1}{@Y}{@@}{^u}M{@L}M{@Y}D{^r}|J{^ur}' from airport KGRB)
Syntax error - unknown glyph at ^ul}
Parse error: no closing brace.
(in sign '{@L}D{@R}36-18{r1}{@Y}{@@}{^l}M{@L}D{@Y}D{^u}|J{^ul}' from airport KGRB)
Syntax error - unknown glyph at ^ul}
Parse error: no closing brace.
(in sign '{@L}D{@R}36-18{r1}{@Y}{@@}{^l}M{@L}D{@Y}D{^u}|J{^ul}' from airport KGRB)
Syntax error - unknown glyph }
(in sign '{@R}15-33}{@@}{@Y}{^u}TERM' from airport KHWY)
Syntax error - unknown glyph }
(in sign '{@R}15-33}{@@}{@Y}{^l}TERM' from airport KHWY)
Syntax error - unknown glyph }
(in sign '{@R}15-33}{@@}{@Y}{^l}TERM' from airport KHWY)
Syntax error - unknown glyph }
(in sign '{@R}15-33}{@@}{@Y}{^l}TERM' from airport KHWY)
Syntax error - unknown glyph }
(in sign '{@Y}TERM}{^r}{@@}{^l}TERM' from airport KHWY)
Syntax error - unknown glyph at ^ur}|G{^r}
Syntax error - unknown glyph at |G{^r}
Parse error: no closing brace.
(in sign '{@Y}F{^ur}|G{^r}' from airport KJST)
Could not find tile 37 name is -
(in sign '{@L}14-32' from airport KMKG)
Could not find tile 37 name is -
(in sign '{@L}32-14' from airport KMKG)
Could not find tile 37 name is -
(in sign '{@L}24-6' from airport KMKG)
Could not find tile 37 name is -
(in sign '{@L}6-24' from airport KMKG)
Could not find tile 37 name is -
(in sign '{@L}6-24' from airport KMKG)
Could not find tile 37 name is -
(in sign '{@L}14-32' from airport KMKG)
Syntax error - unknown glyph @
Syntax error - unknown glyph @
(in sign '{@Y}A1{^r}@@{@L}16R' from airport KPAE)
Syntax error - missing closing brace.
(in sign '{@L)R2' from airport KPBI)
Syntax error - unknown glyph x
Syntax error - unknown glyph x
Syntax error - unknown glyph x
(in sign '{@Y}{^l}x{@L}x{@Y}x{^r}' from airport KPNE)
Syntax error - unknown glyph x
Syntax error - unknown glyph x
Syntax error - unknown glyph x
(in sign '{@Y}{^l}x{@L}x{@Y}x{^r}' from airport KPNE)
Syntax error - unknown glyph at ^ul}A{@L}B{@Y}A{^ur}
Syntax error - unknown glyph at A{@L}B{@Y}A{^ur}
Syntax error - unknown glyph at B{@Y}A{^ur}
Syntax error - unknown glyph at A{^ur}
Parse error: no closing brace.
(in sign '{@Y}{^ul}A{@L}B{@Y}A{^ur}' from airport KPNE)
Syntax error - missing closing brace.
(in sign '{@L}P{@R}07{@@}{@L}P{@Y^l)A' from airport KSBA)
Syntax error - unknown glyph at @Y^l}A{^r}
Syntax error - unknown glyph at A{^r}
Parse error: no closing brace.
(in sign '{@Y^l}A{^r}' from airport KSBA)
Syntax error - unknown glyph at @Y^ru}P{@@}{@L}A
Syntax error - unknown glyph at P{@@}{@L}A
Syntax error - unknown glyph at {@L}A
Syntax error - missing closing brace.
(in sign '{@L}A{@Y^ru}P{@@}{@L}A' from airport KSBA)
Syntax error - unknown glyph at @Y^l}N
Syntax error - missing closing brace.
(in sign '{@L}A{@Y^l}N' from airport KSBA)
Syntax error - unknown glyph at @Y^R}B
Syntax error - missing closing brace.
(in sign '{@L}C{@R}33R-15L{@L}{@@}C{@Y^R}B' from airport KSBA)
Syntax error - unknown glyph at ^ul}{@@}{@L}C
Syntax error - unknown glyph at {@@}{@L}C
Syntax error - unknown glyph at {@L}C
Syntax error - missing closing brace.
(in sign '{@L}C{@Y}B{^ul}{@@}{@L}C' from airport KSBA)
Syntax error - unknown glyph at ^ur}
Parse error: no closing brace.
(in sign '{@L}C{@Y}H{^ur}' from airport KSBA)
Syntax error - unknown glyph at @Y^l}C{^r}{@@}{@L}M
Syntax error - unknown glyph at C{^r}{@@}{@L}M
Syntax error - unknown glyph at {@@}{@L}M
Syntax error - unknown glyph at {@L}M
Syntax error - missing closing brace.
(in sign '{@L}M{@Y^l}C{^r}{@@}{@L}M' from airport KSBA)
Syntax error - unknown glyph at @Y^l}F
Syntax error - missing closing brace.
(in sign '{@L}A{@Y^l}F' from airport KSBA)
Syntax error - unknown glyph at @Y^ur}C{@L}{@@}F
Syntax error - unknown glyph at C{@L}{@@}F
Syntax error - unknown glyph at {@@}F
Syntax error - missing closing brace.
(in sign '{@L}F{@R}07-25{@Y^ur}C{@L}{@@}F' from airport KSBA)
Syntax error - unknown glyph at ^lr}{@@}{@L}H
Syntax error - unknown glyph at {@@}{@L}H
Syntax error - unknown glyph at {@L}H
Syntax error - missing closing brace.
(in sign '{@L}H{@Y,^lu}C{^lr}{@@}{@L}H' from airport KSBA)
Syntax error - unknown glyph at @Y^u}E{@R}15R-33L{@L}{@@}M
Syntax error - unknown glyph at E{@R}15R-33L{@L}{@@}M
Syntax error - unknown glyph at 15R-33L{@L}{@@}M
Syntax error - unknown glyph at {@@}M
Syntax error - missing closing brace.
(in sign '{@L}M{@Y^u}E{@R}15R-33L{@L}{@@}M' from airport KSBA)
Syntax error - unknown glyph at @Y^l}A{^r}
Syntax error - unknown glyph at A{^r}
Parse error: no closing brace.
(in sign '{@L}N{@R}07-25{@L}{@@}N{@Y^l}A{^r}' from airport KSBA)
Syntax error - missing closing brace.
(in sign '{@L}P{@R}07{@@}{@L}P{@Y^l)A' from airport KSBA)
Syntax error - unknown glyph at @Y^l}A{^r}
Syntax error - unknown glyph at A{^r}
Parse error: no closing brace.
(in sign '{@R}07-25{@L}F{@@}{@L}F{@Y^l}A{^r}' from airport KSBA)
Syntax error - unknown glyph at @Y^l}A{^r}
Syntax error - unknown glyph at A{^r}
Parse error: no closing brace.
(in sign '{safety}{@L}N{@R}07-25{@L}{@@}N{@Y^l}A{^r}' from airport KSBA)
Syntax error - unknown glyph at @Y^R}B
Syntax error - missing closing brace.
(in sign '{@R}33R-15L{@L}C{@@}{@L}C{@Y^R}B' from airport KSBA)
Syntax error - unknown glyph at @Y^l}B{^r}
Syntax error - unknown glyph at B{^r}
Parse error: no closing brace.
(in sign '{@R}33R-15L{@L}E{@@}{@L}E{@Y^l}B{^r}' from airport KSBA)
Syntax error - unknown glyph at @Y^l}B
Syntax error - missing closing brace.
(in sign '{@R}33R{@L}L{@@}L{@Y^l}B' from airport KSBA)
Syntax error - unknown glyph at ^ul}C|F{^r}
Syntax error - unknown glyph at C|F{^r}
Parse error: no closing brace.
(in sign '{@Y,^ul}C|F{^r}' from airport KSBA)
Syntax error - missing closing brace.
(in sign '{@Y}{^l}30_|_12{^r]' from airport SAHC)
Could not find tile 49 name is ^l
Could not find tile 50 name is ^r
Could not find tile 48 name is close-frame
(in sign '{@L}L{@R}16R-34L{@@}{@L}L{^l}I{^r}' from airport SBNT)
Could not find tile 49 name is ^l
Could not find tile 51 name is ^u
Could not find tile 50 name is ^r
Could not find tile 48 name is close-frame
(in sign '{@L}M{@R}16R-34L{@@}{@L}M{^l}I{^u}O{^r}' from airport SBNT)
Could not find tile 49 name is ^l
Could not find tile 50 name is ^r
Could not find tile 48 name is close-frame
(in sign '{@L}N{@R}16R-34L{@@}{@L}N{^l}I{^r}' from airport SBNT)
Syntax error - unknown glyph at ^ul}J
Syntax error - missing closing brace.
(in sign '{@R}34L{@Y}{^ul}J' from airport SBNT)
Could not find tile 49 name is ^l
(in sign '{@L}C{@R}34R-16L{@@}{@L}C{^l}B' from airport SBNT)
Syntax error - unknown glyph at ^L}RWY_18_|_RWY_36{^R}
Syntax error - unknown glyph at RWY_18_|_RWY_36{^R}
Parse error: no closing brace.
(in sign '{@Y}{^L}RWY_18_|_RWY_36{^R}' from airport SCIM)
Could not find tile 56 name is ^rd
Could not find tile 47 name is open-frame
Could not find tile 54 name is ^ru
(in sign '{@Y}{^lu}C{@L}C3{^rd}C|{^ru}Q3' from airport ZSPD)
Syntax error - unknown glyph (
Syntax error - unknown glyph ^
Syntax error - unknown glyph r
Syntax error - unknown glyph u
Syntax error - unknown glyph )
(in sign '{@Y}(^ru)P2{@L}C2' from airport ZSPD)
Syntax error - unknown glyph at ^U}E{^r}
Syntax error - unknown glyph at E{^r}
Parse error: no closing brace.
(in sign '{@L}P1{@Y}L15{^U}E{^r}' from airport ZSPD)
Syntax error - unknown glyph @
Syntax error - unknown glyph }
(in sign '{@Y}{^l}W7@L}R4{@Y}L08{^u}' from airport ZSPD)
Syntax error - unknown glyph @
Syntax error - unknown glyph }
(in sign '{@Y}{^u}L08@L}R5{@Y}L09{^r}' from airport ZSPD)
Syntax error - unknown glyph @
Syntax error - unknown glyph }
(in sign '{@Y}{^l}L09@L}E5{@Y}L09{^r}' from airport ZSPD)
Syntax error - unknown glyph @
Syntax error - unknown glyph }
(in sign '{@Y}{^l}L09@L}R6{@Y}L08{^u}' from airport ZSPD)
Syntax error - unknown glyph @
Syntax error - unknown glyph }
(in sign '{@Y}{^l}L08@L}E6{@Y}L08{^r}' from airport ZSPD)
Syntax error - unknown glyph @
Syntax error - unknown glyph }
(in sign '{@Y}{^ld}R4@L}F4{@Y}F{^ru}' from airport ZSPD)
Syntax error - unknown glyph at 6u}|E7{^r}
Syntax error - unknown glyph at |E7{^r}
Parse error: no closing brace.
(in sign '{@Y}{^l}E7{@L}L18{@Y}E{6u}|E7{^r}' from airport ZSPD)
ATC audio initialized.
0:00:01.512 D/HID: HID Bridge Running
0:00:01.512 I/REN: Setting |draw view indicator read from prefs as 1.
0:00:01.512 I/REN: Setting |dim under high G-load or hypoxia read from prefs as 1.
0:00:01.512 I/REN: Setting |draw hi-res planet textures from orbit read from prefs as 1.
0:00:01.512 I/REN: Setting |draw forest fires and balloons read from prefs as 0.
0:00:01.512 I/REN: Setting |draw birds and deer in nice weather read from prefs as 1.
0:00:01.512 I/REN: Setting |draw aircraft carriers and frigates read from prefs as 1.
0:00:01.512 I/REN: Setting |draw Aurora Borealis read from prefs as 1.
0:00:01.512 I/REN: Setting |number of trees read from prefs as 3.
0:00:01.512 I/REN: Setting |number of objects read from prefs as 4.
0:00:01.512 I/REN: Setting |number of roads read from prefs as 2.
0:00:01.512 I/REN: Setting |number of cars read from prefs as 3.
0:00:01.512 I/REN: Setting |world detail distance read from prefs as 3.
0:00:01.512 I/REN: Setting |airport detail read from prefs as 2.
0:00:01.512 I/REN: Setting |water reflection detail read from prefs as 1.
0:00:01.512 I/REN: Setting compress textures to save VRAM read from prefs as 1.
0:00:01.512 I/REN: Setting |runways follow terrain contours read from prefs as 1.
0:00:01.512 I/REN: Setting |draw volumetric fog read from prefs as 1.
0:00:01.512 I/REN: Setting |draw per pixel lighting read from prefs as 1.
0:00:01.512 I/REN: Setting |HDR rendering read from prefs as 0.
0:00:01.512 I/REN: Setting |shadow detail read from prefs as 1.
0:00:01.512 I/REN: Setting |atmospheric scattering read from prefs as 1.
0:00:01.512 I/REN: Setting |HDR anti-aliasing read from prefs as 0.
0:00:01.512 I/REN: Setting |3-D bump-maps read from prefs as 1.
0:00:01.512 I/REN: Setting |gritty detail textures read from prefs as 1.
0:00:01.512 D/State: Received: 0:0
0:00:01.512 I/ACF: Loading airplane number 0 with Aircraft/General Aviation/P180 Avanti Ferrari Team/avanti.acf
0:00:01.512 I/FLT: Init p0 type:loc_tak apt:EDDT rwy:26R
0:00:01.512 I/SCN: DSF load time: 3599018 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+50+010/+52+012.dsf (189439 tris)
0:00:01.512 I/SCN: DSF load time: 114784 for file Custom Scenery/Aerosoft - EDDT Berlin Tegel/Earth nav data/+50+010/+52+013.dsf (0 tris)
0:00:01.512 I/SCN: DSF load time: 3292519 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+50+010/+52+013.dsf (250535 tris)
0:00:01.512 I/SCN: DSF load time: 2281629 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+50+010/+52+014.dsf (205228 tris)
0:00:01.512 I/SCN: DSF load time: 2218593 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+50+010/+53+012.dsf (195744 tris)
0:00:01.512 I/SCN: DSF load time: 2334873 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+50+010/+53+013.dsf (212947 tris)
0:00:01.512 I/SCN: DSF load time: 2229085 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+50+010/+53+014.dsf (178649 tris)
0:01:10.240 I/ACF: Loading airplane number 1 with Aircraft/General Aviation/StinsonL5/L5.acf
0:01:10.240 I/FLT: Init p1 type:loc_general_area lat:52.447807 lon:12.422697 ele(ft):5197.392578 psi:149.967957 spd(kts):110.392105
0:01:10.240 I/ACF: Loading airplane number 2 with Aircraft/General Aviation/Cessna 172SP/Cessna_172SP.acf
0:01:10.240 I/FLT: Init p2 type:loc_general_area lat:52.966949 lon:12.228018 ele(ft):1429.343018 psi:102.472603 spd(kts):88.962997
0:01:10.240 I/ACF: Loading airplane number 3 with Aircraft/General Aviation/KingAir C90B/KingAirC90B.acf
0:01:10.240 I/FLT: Init p3 type:loc_general_area lat:52.046368 lon:14.373637 ele(ft):10361.127930 psi:347.035736 spd(kts):227.987930
0:01:10.240 I/FLT: Init p1 type:loc_ram apt:EDDT rwy:08L
0:01:10.240 I/ATC: p1(N01XP) FP filed - EDDT to EDAM at 8000 via , type=2
0:01:10.240 I/ATC: p2(N02XP) Popup FP filed to EDDT at 5000 via , type=2
0:01:10.240 D/ATC: Validating altitude for p2(N02XP): filed: 5000 usable_rte_dist: 13.508348 maxDescent: 3000 maxAlt: 3000 minAlt: 5000 chosen_alt: 3000
0:01:10.240 D/ATC: p2(N02XP): Cleared IFR
0:01:10.240 I/FLT: Init p2 type:loc_specify_lle lat:52.314754 lon:13.060737 ele(ft):5000.000000 psi:28.000000 spd(kts):228.887680
0:01:10.240 D/ATC: p2(N02XP): FlyToPoints
0:01:10.240 D/ATC: p2(N02XP): Maintain 2998ft
0:01:10.240 I/ATC: N02XP, Descend and maintain 3 thousand, resume own navigation.
0:01:10.240 E/FLT: Init p3 type:loc_ram HAD BOGUS RUNWAY! apt:EDDT rwy:4 dir:0
0:01:10.240 I/ATC: p3(N03XP) FP filed - EDDT to EBFS at 24000 via DLE DUS GSY , type=2
0:01:20.075 D/ATC: p2(N02XP): Fly Heading: 325
0:01:20.075 D/ATC: p2(N02XP): Maintain 5000ft
0:01:20.075 D/ATC: Validating altitude for p1(N01XP): filed: 8000 usable_rte_dist: 69.581253 maxDescent: 17000 maxAlt: 17000 minAlt: 8000 chosen_alt: 8000
0:01:20.075 D/ATC: p1(N01XP): Cleared IFR
0:01:20.075 W/ATC: Frequency 40 for flow AUTOGEN: North runway 08L at EDDT seemed invalid and was overwriten!
0:01:20.075 D/ATC: p1(N01XP): Squawk 4700
0:01:20.592 D/ATC: Validating altitude for p3(N03XP): filed: 24000 usable_rte_dist: 285.188416 maxDescent: 71000 maxAlt: 72000 minAlt: 24000 chosen_alt: 24000
0:01:20.592 D/ATC: p3(N03XP): Cleared IFR
0:01:20.592 D/ATC: p3(N03XP): Squawk 4701
0:01:20.631 D/ATC: p1(N01XP): Taxi (44 points issued)
0:01:20.699 D/ATC: p3(N03XP): Taxi (38 points issued)
0:01:26.396 I/ATC: Down to 3 thousand, own navigation, N02XP.
0:01:50.435 I/ATC: N02XP, EDDT altimeter 2 9 9 2.
0:01:58.021 I/ATC: EDDT altimeter 2 9 9 2, N02XP.
0:03:22.387 I/ACF: Loading airplane number 0 with Aircraft/Heavy Metal/A333-RR-EIS2-Lufthansa/A333-RR-EIS2-Lufthansa/A330-300.acf
Fetching plugins for C:\Program Files (x86)/Steam/steamapps/common/X-Plane 10/Aircraft/Heavy Metal/A333-RR-EIS2-Lufthansa/A333-RR-EIS2-Lufthansa/plugins
SASL: Starting...
X-Plane scriptable avionics library plugin v2.0.2 Commercial Edition
Loaded: C:\Program Files (x86)/Steam/steamapps/common/X-Plane 10/Aircraft/Heavy Metal/A333-RR-EIS2-Lufthansa/A333-RR-EIS2-Lufthansa/plugins/sasl/64/win.xpl (1-sim.sasl).
SASL: Path to panel: C:\Program Files (x86)\Steam\steamapps\common\X-Plane 10\Aircraft\Heavy Metal\A333-RR-EIS2-Lufthansa\A333-RR-EIS2-Lufthansa\avionics.sec
SASL: Loading avionics...
SASL INFO: loading panel
SASL INFO: loading panel1
SASL INFO: loading rectangle
SASL INFO: loading ENGINE
SASL INFO: loading THROTTLE
SASL INFO: loading CONTROLS
SASL INFO: loading PFD
SASL INFO: loading panel_logic
SASL INFO: Avionics loaded
0:03:22.387 I/FLT: Init p0 type:loc_tak apt:EDDT rwy:08L
0:04:38.426 I/ACF: Loading airplane number 0 with Aircraft/Heavy Metal/A380-800/A380-800/A380.acf
0:04:38.426 I/FLT: Init p0 type:loc_tak apt:EDDT rwy:08L
0:05:54.257 I/ATC: p0(A380 ) FP filed - EDDT to SAZS at 36000 via DLE KBO CIV TSU AMB NTS BH005 QPR XIDAN SEPAL BEGAS BERUX KOPAS ARMED DETOX 15SNT KOMUT MANOX SNT FUN NELSO TENKO NEXUX PIBIL GOBEG IXIKU LAPTU 2325N 2025N 2027N 2029N 1830N 1630N KENOX 1430N 1230N 1030N 0830N 0630N DEKON TASIL ORARO CRUDE CARVE JOBER FLZ ABASE OBGEL PTL FLOCK BORBA SVD GRUDE APORT LAP DRUNK FRM GOI DANIL ULD PASTE BONER PRR VAPOL FOZ POS BITUS RTA ERE CABAL PAR MJZ ALDOR GPI OSA OEL NEU CHP , type=2
0:05:54.410 D/ATC: Validating altitude for p0(A380 ): filed: 36000 usable_rte_dist: 7311.540527 maxDescent: 1827000 maxAlt: 1830000 minAlt: 36000 chosen_alt: 36000
0:05:54.410 D/ATC: p0(A380 ): Cleared IFR
0:05:54.410 D/ATC: p0(A380 ): Squawk 4702
0:05:54.410 I/ATC: A380 , Cleared IFR to SAZS as filed maintain FL 3 6 0, squawk 4 7 0 2.
0:06:05.578 I/ATC: Cleared IFR to SAZS as filed maintain FL 3 6 0, squawk 4 7 0 2, A380 .
0:06:12.596 D/ATC: p2(N02XP): Fly Heading: 350
0:06:12.596 D/ATC: p2(N02XP): Maintain 1998ft
0:06:20.364 I/ATC: Adding p0(A380 ) into Active Queue
0:06:20.364 E/ATC: Text function failed expansion: .taxiRwy(08L|)
0:06:20.364 E/ATC: Wave function failed expansion: .taxiRwy(08L|)
0:06:20.364 I/ATC: A380 , .taxiRwy(08L|).
0:06:20.364 E/ATC: Tried playing a wave file that doesn't exist: '.taxiRwy(08L|)'
0:06:20.364 D/ATC: p0(A380 ): Taxi (2 points issued)
0:06:22.930 E/ATC: Text function failed expansion: .taxiRwy(08L|)
0:06:22.930 E/ATC: Wave function failed expansion: .taxiRwy(08L|)
0:06:22.930 I/ATC: .taxiRwy(08L|), A380 .
0:06:22.930 E/ATC: Tried playing a wave file that doesn't exist: '.taxiRwy(08L|)'
0:06:36.007 I/ATC: Removing p0(A380 ) from Active Queue
0:07:23.481 E/FLT: Init p0 type:loc_ram HAD BOGUS RUNWAY! apt:EDDT rwy:35 dir:0
0:07:32.407 I/ATC: p0(A380 ) FP filed - EDDT to SAZB at 36000 via DLE KBO CIV TSU AMB NTS BH005 QPR XIDAN SEPAL BEGAS BERUX KOPAS ARMED DETOX 15SNT KOMUT MANOX SNT FUN NELSO TENKO NEXUX PIBIL GOBEG IXIKU LAPTU 2325N 2025N 2027N 2029N 1830N 1630N KENOX 1430N 1230N 1030N 0830N 0630N DEKON TASIL ORARO FNO NTL GETEC MCE ACJ SVD GRUDE APORT AUGUR CARVA FRM GOI DANIL ARX PIR SCB CTB AULIC VENUS XPC PFD SMA BGE TMB GUA NIN GAVOS BCA , type=2
0:07:32.548 D/ATC: Validating altitude for p0(A380 ): filed: 36000 usable_rte_dist: 6705.058594 maxDescent: 1676000 maxAlt: 1676000 minAlt: 36000 chosen_alt: 36000
0:07:32.548 D/ATC: p0(A380 ): Cleared IFR
0:07:32.548 D/ATC: p0(A380 ): Squawk 4702
0:07:32.548 I/ATC: A380 , Cleared IFR to SAZB as filed maintain FL 3 6 0, squawk 4 7 0 2.
0:07:41.279 D/ATC: p2(N02XP): Fly Heading: 50
0:07:43.513 I/ATC: Cleared IFR to SAZB as filed maintain FL 3 6 0, squawk 4 7 0 2, A380 .
0:07:58.206 E/ATC: Text function failed expansion: .taxiRwy(08L|)
0:07:58.206 E/ATC: Wave function failed expansion: .taxiRwy(08L|)
0:07:58.206 I/ATC: A380 , .taxiRwy(08L|), hold short of runway 08L.
0:07:58.206 E/ATC: Tried playing a wave file that doesn't exist: '.taxiRwy(08L|)'
0:07:58.206 D/ATC: p0(A380 ): Taxi (42 points issued)
0:08:02.345 E/ATC: Text function failed expansion: .taxiRwy(08L|)
0:08:02.345 E/ATC: Wave function failed expansion: .taxiRwy(08L|)
0:08:02.345 I/ATC: .taxiRwy(08L|), hold short of 08L, A380 .
0:08:02.345 E/ATC: Tried playing a wave file that doesn't exist: '.taxiRwy(08L|)'
0:08:23.381 I/ATC: Adding p3(N03XP) into Hold Queue
0:08:23.381 I/ATC: N03XP, Contact Tower on 124.52.
0:08:23.381 D/ATC: p3(N03XP): Contact controller on 124.52
0:08:44.747 I/ATC: Contact Tower on 124.52, N03XP.
0:08:44.879 D/ATC: p3(N03XP): Switching frequency to 124.52
0:08:46.099 D/ATC: p3(N03XP): Taxi (2 points issued)
0:08:46.099 I/ATC: Removing p3(N03XP) from Hold Queue
0:08:46.099 I/ATC: Adding p3(N03XP) into Active Queue
0:09:07.676 D/ATC: p3(N03XP): Takeoff: 08L
0:09:44.712 I/ATC: Removing p3(N03XP) from Active Queue
0:09:44.712 D/ATC: p3(N03XP): FlyToPoints
0:09:44.712 D/ATC: p3(N03XP): Contact controller on 135.95
0:09:44.750 D/ATC: p3(N03XP): Switching frequency to 135.95
0:10:02.594 I/ACF: Loading airplane number 0 with Aircraft/Heavy Metal/SSG B748-Inter_V1.1/SSG_B748-I.acf
Fetching plugins for C:\Program Files (x86)/Steam/steamapps/common/X-Plane 10/Aircraft/Heavy Metal/SSG B748-Inter_V1.1/plugins
Loaded UFMC plugin, all initialization done. Current version is SSG748 V2.9 is copyright FJCC@2014, Javier Cortes.
He abierto C:\Program Files (x86)\Steam\steamapps\common\X-Plane 10\Resources\default data\earth_awy.dat
Loaded: C:\Program Files (x86)/Steam/steamapps/common/X-Plane 10/Aircraft/Heavy Metal/SSG B748-Inter_V1.1/plugins/FJCC/64/win.xpl (FJCC.SSG748).
DreamEngine: 2.0 build 0250
DreamEngine: Package Loaded.
DreamEngine: Package Script Loaded.
Loaded: C:\Program Files (x86)/Steam/steamapps/common/X-Plane 10/Aircraft/Heavy Metal/SSG B748-Inter_V1.1/plugins/XDreamEngine/64/win.xpl (DreamFoil.DreamEngine).
SASL: Starting...
X-Plane scriptable avionics library plugin v2.0.2 Commercial Edition
Loaded: C:\Program Files (x86)/Steam/steamapps/common/X-Plane 10/Aircraft/Heavy Metal/SSG B748-Inter_V1.1/plugins/sasl/64/win.xpl (1-sim.sasl).
SASL: Path to panel: C:\Program Files (x86)\Steam\steamapps\common\X-Plane 10\Aircraft\Heavy Metal\SSG B748-Inter_V1.1\aircraft.key
SASL: Loading avionics...
SASL INFO: loading panel
SASL INFO: loading jcfmc
SASL INFO: loading generalsys
SASL INFO: loading actuators
SASL INFO: loading radios
SASL INFO: loading memolist
SASL INFO: loading Checklist
SASL INFO: loading commands
SASL INFO: Avionics loaded
C:\Program Files (x86)\Steam\steamapps\common\X-Plane 10\Aircraft\Heavy Metal\SSG B748-Inter_V1.1\plugins\FJCC\Data\ufmc_sid.dat
Voy a cargar las texturas
texturas cargadas
0:10:02.594 I/FLT: Init p0 type:loc_tak apt:EDDT rwy:08L
DreamEngine: Dataref (PB_actual_speed) not found.
DreamEngine: Dataref (sim/SND/Sound_eng_inn) not found.
Generator: B[00] S[00] Package Sound Loaded[0]: truck_engine.wav
Generator: B[00] S[00] Package Sound Loaded[1]: flap_motorl.wav
Generator: B[00] S[00] Package Sound Loaded[2]: flap_motorr.wav
Generator: B[00] S[00] Package Sound Loaded[3]: gear_down.wav
Generator: B[00] S[00] Package Sound Loaded[4]: gear_up.wav
Generator: B[00] S[00] Package Sound Loaded[5]: gearwind.wav
Generator: B[00] S[00] Package Sound Loaded[6]: truck_engine.wav
Generator: B[00] S[00] Package Sound Loaded[7]: cockpitenv.wav
Generator: B[00] S[00] Package Sound Loaded[8]: cockpitenv.wav
Generator: B[00] S[00] Package Sound Loaded[9]: externalaircon.wav
Generator: B[00] S[00] Package Sound Loaded[10]: avionics.wav
Generator: B[00] S[00] Package Sound Loaded[11]: apu.wav
Generator: B[00] S[00] Package Sound Loaded[12]: rollinga.wav
Generator: B[00] S[00] Package Sound Loaded[13]: rollingb.wav
Generator: B[00] S[00] Package Sound Loaded[14]: rollingc.wav
Generator: B[00] S[00] Package Sound Loaded[15]: skida.wav
Generator: B[00] S[00] Package Sound Loaded[16]: skidb.wav
Generator: B[00] S[00] Package Sound Loaded[17]: skidc.wav
Generator: B[00] S[00] Package Sound Loaded[18]: skidd.wav
Generator: B[00] S[00] Package Sound Loaded[19]: skide.wav
Generator: B[00] S[00] Package Sound Loaded[20]: wind.wav
Generator: B[00] S[00] Package Sound Loaded[21]: engine_spool1.wav
Generator: B[00] S[00] Package Sound Loaded[22]: engine_spool2.wav
Generator: B[00] S[00] Package Sound Loaded[23]: engine_spool3.wav
Generator: B[00] S[00] Package Sound Loaded[24]: engine_spool4.wav
Generator: B[00] S[00] Package Sound Loaded[25]: starterx1.wav
Generator: B[00] S[00] Package Sound Loaded[26]: starterx2.wav
Generator: B[00] S[00] Package Sound Loaded[27]: starterx3.wav
Generator: B[00] S[00] Package Sound Loaded[28]: starterx4.wav
Generator: B[00] S[00] Package Sound Loaded[29]: reverserax.wav
Generator: B[00] S[00] Package Sound Loaded[30]: reverserbx.wav
Generator: B[00] S[00] Package Sound Loaded[31]: reversercx.wav
Generator: B[00] S[00] Package Sound Loaded[32]: reverserdx.wav
Generator: B[00] S[00] Package Sound Loaded[33]: fand1.wav
Generator: B[00] S[00] Package Sound Loaded[34]: fanax1.wav
Generator: B[00] S[00] Package Sound Loaded[35]: fand2.wav
Generator: B[00] S[00] Package Sound Loaded[36]: fanax2.wav
Generator: B[00] S[00] Package Sound Loaded[37]: fand3.wav
Generator: B[00] S[00] Package Sound Loaded[38]: fanax3.wav
Generator: B[00] S[00] Package Sound Loaded[39]: fand4.wav
Generator: B[00] S[00] Package Sound Loaded[40]: fanax4.wav
Generator: B[00] S[00] Package Sound Loaded[41]: idlea1.wav
Generator: B[00] S[00] Package Sound Loaded[42]: idledx1.wav
Generator: B[00] S[00] Package Sound Loaded[43]: idlea2.wav
Generator: B[00] S[00] Package Sound Loaded[44]: idledx2.wav
Generator: B[00] S[00] Package Sound Loaded[45]: idlea3.wav
Generator: B[00] S[00] Package Sound Loaded[46]: idledx3.wav
Generator: B[00] S[00] Package Sound Loaded[47]: idlea4.wav
Generator: B[00] S[00] Package Sound Loaded[48]: idledx4.wav
Generator: B[00] S[00] Package Sound Loaded[49]: powerdx1.wav
Generator: B[00] S[00] Package Sound Loaded[50]: powerdx2.wav
Generator: B[00] S[00] Package Sound Loaded[51]: powerdx3.wav
Generator: B[00] S[00] Package Sound Loaded[52]: powerdx4.wav
Generator: B[00] S[00] Package Sound Loaded[53]: powerax1.wav
Generator: B[00] S[00] Package Sound Loaded[54]: powerax2.wav
Generator: B[00] S[00] Package Sound Loaded[55]: powerax3.wav
Generator: B[00] S[00] Package Sound Loaded[56]: powerax4.wav
Generator: B[00] S[00] Package Sound Loaded[57]: whinehighax1.wav
Generator: B[00] S[00] Package Sound Loaded[58]: whinehighax1.wav
Generator: B[00] S[00] Package Sound Loaded[59]: whinehighax1.wav
Generator: B[00] S[00] Package Sound Loaded[60]: whinehighax1.wav
Generator: B[00] S[00] Package Sound Loaded[61]: whinehighc1.wav
Generator: B[00] S[00] Package Sound Loaded[62]: whinehighc2.wav
Generator: B[00] S[00] Package Sound Loaded[63]: whinehighc3.wav
Generator: B[00] S[00] Package Sound Loaded[64]: whinehighc4.wav
Clean exit from threads.
0:10:45.061 I/ATC: p0(SSG002) FP filed - EDDT to YDPO at 35000 via CZE LDZ OTPES RUD PNK GOL RONIT SEREP KONLI GAMDI RUBIM LUBON KZN UWS BENOL RG MGR TUSOP AST KRG BLH ALM ERULA KCA OSNOT URC FKG HMI CHW YBL JTA JIG FNH NSH SUBUL GAO QJG GORMO KWE BSE TEBAK NAH HATIN HUE QNGAI VEPAM DALBA MIGUG EMPUL DODUG LULBU PR MARAN PIKAN BCD MCT COT GSA PEDNO MNO GONTA MWB AMN GOMBY OSUVI UNSEP BACAU SPRIG ZOCCA FLIPA SNBSF DN TN HOUND TNK MOREL SPEAR MA OSBEH VALDZ HAMER WDHSA LLEND EVOKE GGEWF OLRIP VAVGA GTH AY ML WON WYY , type=2
0:10:45.699 D/ATC: Validating altitude for p0(SSG002): filed: 35000 usable_rte_dist: 9311.412109 maxDescent: 2327000 maxAlt: 2327000 minAlt: 35000 chosen_alt: 35000
0:10:45.699 D/ATC: p0(SSG002): Cleared IFR
0:10:45.699 D/ATC: p0(SSG002): Squawk 4702
0:10:45.699 I/ATC: SSG002, Cleared IFR to YDPO as filed maintain FL 3 5 0, squawk 4 7 0 2.
0:10:58.106 I/ATC: p0(SSG002) FP filed - EDDT to NZAA at 35000 via TRT DAR KMI KLA RIA VI PVO VIL JNS KNI KLA KNS KIK VRD LARNU ADEMA PIBOL TIMUN MARUL RUBOV LIKUN DOGOT PESIK USATO MELUS VETOK MITKI ROMUL GIRAB AGAKI ETARA MOPUL LUSOR MEDIG OKSEL GOMUT VIKBI OMOMA PENID LUNIL SUBOB LODSA LUNEK OBASO PEPAN ALURO RATLI ABENA TUSOM ORVAS BAGLI PASRO CUTEE AGEDI KALIG ADGOR ETRON GARRY HABIT FERAR UPDOB KAKNI NITOT SEGRO BEEBO RISBA PHILY JIMOS PEXOR ENINY OLGIS HUMDU KNOWS KAVLE KEMLE LENIA NI MORNA ATIBA BULRO ATRAS GITON LATOL LB NA AGTOS DUNAK EGATO DOLSI SAKLO WP , type=2
0:10:58.106 E/FLT: Init p0 type:loc_ram HAD BOGUS RUNWAY! apt:EDDT rwy:35 dir:0
0:11:03.432 D/ATC: Validating altitude for p0(SSG002): filed: 35000 usable_rte_dist: 10489.971680 maxDescent: 2622000 maxAlt: 2622000 minAlt: 35000 chosen_alt: 35000
0:11:03.432 D/ATC: p0(SSG002): Cleared IFR
0:11:03.432 D/ATC: p0(SSG002): Squawk 4702
0:11:03.432 I/ATC: SSG002, Cleared IFR to NZAA as filed maintain FL 3 5 0, squawk 4 7 0 2.
0:11:36.395 I/ATC: p0() FP filed - EDDT to EHAM at 11500 via , type=2
0:11:41.514 I/ATC: p0(SSG002) FP filed - EDDT to NZAA at 35000 via LAW KRT KRD SAU LBN WKL SPB SVL VEH KNI KLA KNS KIK VRD LARNU ADEMA PIBOL TIMUN MARUL RUBOV LIKUN DOGOT PESIK USATO MELUS VETOK MITKI ROMUL GIRAB AGAKI ETARA MOPUL LUSOR MEDIG OKSEL GOMUT VIKBI OMOMA PENID LUNIL SUBOB LODSA LUNEK OBASO PEPAN ALURO RATLI ABENA TUSOM ORVAS BAGLI PASRO CUTEE AGEDI KALIG ADGOR ETRON GARRY HABIT FERAR UPDOB KAKNI NITOT SEGRO BEEBO RISBA PHILY JIMOS PEXOR ENINY OLGIS HUMDU KNOWS KAVLE KEMLE LENIA NI MORNA ATIBA BULRO ATRAS GITON LATOL LB NA AGTOS DUNAK EGATO DOLSI SAKLO WP , type=2
0:11:41.777 D/ATC: Validating altitude for p0(SSG002): filed: 35000 usable_rte_dist: 10588.900391 maxDescent: 2647000 maxAlt: 2647000 minAlt: 35000 chosen_alt: 35000
0:11:41.777 D/ATC: p0(SSG002): Cleared IFR
0:11:41.777 D/ATC: p0(SSG002): Squawk 4702
0:11:41.777 I/ATC: SSG002, Cleared IFR to NZAA as filed maintain FL 3 5 0, squawk 4 7 0 2.
0:11:54.201 I/ATC: Cleared IFR to NZAA as filed maintain FL 3 5 0, squawk 4 7 0 2, SSG002.
0:12:10.795 E/ATC: Text function failed expansion: .taxiRwy(08L|)
0:12:10.795 E/ATC: Wave function failed expansion: .taxiRwy(08L|)
0:12:10.795 I/ATC: SSG002, .taxiRwy(08L|), hold short of runway 08L.
0:12:10.795 E/ATC: Tried playing a wave file that doesn't exist: '.taxiRwy(08L|)'
0:12:10.795 D/ATC: p0(SSG002): Taxi (42 points issued)
0:12:16.459 E/ATC: Text function failed expansion: .taxiRwy(08L|)
0:12:16.459 E/ATC: Wave function failed expansion: .taxiRwy(08L|)
0:12:16.459 I/ATC: .taxiRwy(08L|), hold short of 08L, SSG002.
0:12:16.459 E/ATC: Tried playing a wave file that doesn't exist: '.taxiRwy(08L|)'
0:14:26.347 I/ATC: Adding p1(N01XP) into Hold Queue
0:14:26.347 I/ATC: N01XP, Contact Tower on 124.52.
0:14:26.347 D/ATC: p1(N01XP): Contact controller on 124.52
0:14:33.512 I/ATC: Contact Tower on 124.52, N01XP.
0:14:33.783 D/ATC: p1(N01XP): Switching frequency to 124.52
0:14:36.261 D/ATC: p1(N01XP): Taxi (2 points issued)
0:14:36.261 I/ATC: Removing p1(N01XP) from Hold Queue
0:14:36.261 I/ATC: Adding p1(N01XP) into Active Queue
0:15:04.596 D/ATC: p1(N01XP): Takeoff: 08L
0:15:05.139 D/ATC: p2(N02XP): Fly Heading: 80
0:15:05.139 D/ATC: p2(N02XP): Report Field in Sight
0:15:05.198 I/ATC: Adding p2(N02XP) into Active Queue
0:15:05.198 D/ATC: p2(N02XP): Contact controller on 124.52
0:15:05.198 D/ATC: p2(N02XP): FlyToPoints
0:15:05.198 D/ATC: p2(N02XP): Cleared VIS approach!
0:15:05.381 D/ATC: p2(N02XP): Switching frequency to 124.52
0:15:57.042 I/ATC: Removing p1(N01XP) from Active Queue
0:15:57.042 D/ATC: p1(N01XP): FlyToPoints
0:15:57.042 D/ATC: p1(N01XP): Contact controller on 135.95
0:15:57.104 D/ATC: p1(N01XP): Switching frequency to 135.95
0:18:05.365 D/ATC: p2(N02XP): Land: 08L
0:18:42.653 I/ATC: Adding p0(SSG002) into Hold Queue
0:18:42.653 I/ATC: SSG002, Contact Tower on 124.52.
0:18:42.653 D/ATC: p0(SSG002): Contact controller on 124.52
0:18:50.057 I/ATC: Contact Tower on 124.52, SSG002.
0:18:50.241 D/ATC: p0(SSG002): Switching frequency to 124.52
0:19:00.632 I/ATC: Tower, SSG002, Checking in.
0:19:00.632 E/ATC: Tried playing a wave file that doesn't exist: 'checking_in.wav'
0:19:07.704 D/ATC: p0(SSG002): Taxi (2 points issued)
0:19:07.704 I/ATC: SSG002, Runway 08L, you're cleared for takeoff.
0:19:07.704 I/ATC: Removing p0(SSG002) from Hold Queue
0:19:07.704 I/ATC: Adding p0(SSG002) into Active Queue
0:19:13.408 I/ATC: Runway 08L, cleared for takeoff, SSG002.
0:19:23.068 D/ATC: p0(SSG002): Takeoff: 08L
0:20:19.020 I/ATC: Removing p0(SSG002) from Active Queue
0:20:19.020 D/ATC: p0(SSG002): FlyToPoints
0:20:19.020 I/ATC: SSG002, Contact ZGD Center on 135.95.
0:20:19.020 D/ATC: p0(SSG002): Contact controller on 135.95
0:20:26.482 I/ATC: Contact ZGD Center on 135.95, SSG002.
0:20:26.706 D/ATC: p0(SSG002): Switching frequency to 135.95
0:20:37.005 I/ATC: Center, SSG002, Checking in.
0:20:37.005 E/ATC: Tried playing a wave file that doesn't exist: 'checking_in.wav'
0:20:43.928 I/ATC: SSG002, EDDT altimeter 2 9 9 2.
0:20:52.211 I/ATC: EDDT altimeter 2 9 9 2, SSG002.
X-Reloaded: disabled
X-Reloaded: stopped
0:21:32.512 D/HID: HID Bridge Shutdown
----- X-Plane has shut down -----
Link to comment
Share on other sites

Laut der log sind keine von Simple Season angelegten Ordner in Custom Scenery vorhanden. Guck doch mal bitte in den PythonInterface-Ordner. Da müsste sich ebenfalls eine log-Datei befinden. Poste deren Imhalt mal.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy & Terms of Use