Developer OPabst 2091 Posted May 7, 2012 Developer Share Posted May 7, 2012 AES 2.23a is out - Productpage - outdated - List of supported Addon Airports with AES 2.23 - Releasenote AES 2.23 This Version is in most parts (Airport) identical to AES 2.22, but has some changes in the handling of replacement textures and is needed to use them. - Here the documentation, how to use replacement textures:Repaint Install Info ENG.pdf (updated to 2.23a) - Replacement Set of repainters can be up/downloaded in the AES Download Area of this forum - Who wants to repaint textures, please look here: AES-Repaintkit 1.0 Update 9th May 2012, 1PM: Following parts are fix/enhanced in the Version 2.23a: - Fixed for the issue, that some Airport CFG Files are not gernerated - AESHelp will now check for wrong Texturefilenames and report a info - Enhancment for the Texture ID to be able to select regions or countries: For the <Texture ID> in this AES Version, two type of ID’s are usable Level 0: <Texture ID> = 0000 This are the Default Textures of AES and will always replaced, then AES is installed or updated. So please don’t use them for any replacements. This textures are used in AES, when no other Texture of a higher level is found. Level 1: <Texture ID> = XXXX (4 X Letters) In this case, the repaint Texture is used at all airports instead if the AES Default Texture, as long as there is no ICAO code related Texture of a higher level is present for that Airport. Level 2: <Texture ID> = ? - - - One Letter followed by three minus signs The first Letter of the ICAO Code, like K--- for all Airports in USA. Those Textures will be used of all Airports of the Region. At Wikipedia you can find a list of this Codes and Regions: http://en.wikipedia....on_airport_code Level 3: <Texture ID> = ??- - Two Letters followed by two minus signs The first two letters of the ICAO code defines the Country, where the Textures will used, like ED- - for all German Civil Airports Level 4: <Texture ID> = ??? - Three Letters followed by one minus sign For example EDD- will define all international Airports in Germany. The last two letters of the ICAO Codes have different usage in the Countries, so maybe this makes no sense in some Countries. Level 5: <Texture ID> = ???? Complete ICAO Code, four letters The complete ICAO Code will define the Airport, where the textures are used. Always the highest available Level will be used. 4 Link to comment Share on other sites More sharing options...
Walter Almaraz 81 Posted May 7, 2012 Share Posted May 7, 2012 Thank you Oliver, this is awesome Regards, Walter Link to comment Share on other sites More sharing options...
jack1ca 4 Posted May 8, 2012 Share Posted May 8, 2012 Oliver......... .....any plans to add UK 2000 Cardiff Extreme at some point? Jack Fentress Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted May 9, 2012 Author Developer Share Posted May 9, 2012 Installer AES 2.23a available, see first Post for details Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted May 9, 2012 Author Developer Share Posted May 9, 2012 Can you have two catering companies at the same airport like the two of alex F. Not yet, only if you rename the Texture before you fly and Start/Stop AESHelp. For the same time at one Aircraft, you should not need it. Later, when Airline oriented Assignments are possible, this can be configured. Link to comment Share on other sites More sharing options...
jack1ca 4 Posted May 9, 2012 Share Posted May 9, 2012 Oliver......... I do have V 2.23a installed and did read the details. No problem there. I'm just asking if Cardiff Extreme (EGFF) will be included in a future release. Jack Link to comment Share on other sites More sharing options...
Geddy_2112 99 Posted May 9, 2012 Share Posted May 9, 2012 Oliver......... I do have V 2.23a installed and did read the details. No problem there. I'm just asking if Cardiff Extreme (EGFF) will be included in a future release. Jack Cardiff EGFF has already been requested in the proper forums, so safe to say Oliver will get it done eventually. Link to comment Share on other sites More sharing options...
nickac1092 8 Posted May 10, 2012 Share Posted May 10, 2012 Hey oliver. Great work. I cant wait for AES NG. Now i have a question to ask. Is there a possibility to add a "ground power unit"? Its basically a box with an engine or generator in it that provides power to the aircraft. Its usally on the right side (nav green side) of the aircraft placed by the nose gear (or up by the AES marshel when hes standing over there). 1 Link to comment Share on other sites More sharing options...
Rafal Haczek 1612 Posted May 12, 2012 Share Posted May 12, 2012 can someone make aviapartner textures for AES please? How about asking here: http://forum.aerosoft.com/index.php?/topic/54592-request-your-custom-vehicle-repaints-here/ Link to comment Share on other sites More sharing options...
Abdull James 17 Posted May 20, 2012 Share Posted May 20, 2012 Hey I never done a repaint of any kind and would love to learn, anyone have any advice on tutorial websites or videos that can help teach a raw beginner? Would it be to much to ask if Aerosoft provide a tutorial video? I have both photoshop CS6 and DXTbmp. Link to comment Share on other sites More sharing options...
JamesChams 108 Posted June 15, 2012 Share Posted June 15, 2012 Wow!!! Mr. Pabst, you've been busy.... I'm looking forward to trying this new version out... but before i do, should I NOT install FSDT's GSX in-conjunction with it? AES 2.23a is out - Productpage - Installer AES 2.23a - List of supported Addon Airports with AES 2.23 - Releasenote AES 2.23 This Version is in most parts (Airport) identical to AES 2.22, but has some changes in the handling of replacement textures and is needed to use them. - Here the documentation, how to use replacement textures:Repaint Install Info ENG.pdf (updated to 2.23a) - Replacement Set of repainters can be up/downloaded in the AES Download Area of this forum - Who wants to repaint textures, please look here: AES-Repaintkit 1.0 Update 9th May 2012, 1PM: Following parts are fix/enhanced in the Version 2.23a: - Fixed for the issue, that some Airport CFG Files are not gernerated - AESHelp will now check for wrong Texturefilenames and report a info - Enhancment for the Texture ID to be able to select regions or countries: For the <Texture ID> in this AES Version, two type of ID’s are usable Level 0: <Texture ID> = 0000 This are the Default Textures of AES and will always replaced, then AES is installed or updated. So please don’t use them for any replacements. This textures are used in AES, when no other Texture of a higher level is found. Level 1: <Texture ID> = XXXX (4 X Letters) In this case, the repaint Texture is used at all airports instead if the AES Default Texture, as long as there is no ICAO code related Texture of a higher level is present for that Airport. Level 2: <Texture ID> = ? - - - One Letter followed by three minus signs The first Letter of the ICAO Code, like K--- for all Airports in USA. Those Textures will be used of all Airports of the Region. At Wikipedia you can find a list of this Codes and Regions: http://en.wikipedia....on_airport_code Level 3: <Texture ID> = ??- - Two Letters followed by two minus signs The first two letters of the ICAO code defines the Country, where the Textures will used, like ED- - for all German Civil Airports Level 4: <Texture ID> = ??? - Three Letters followed by one minus sign For example EDD- will define all international Airports in Germany. The last two letters of the ICAO Codes have different usage in the Countries, so maybe this makes no sense in some Countries. Level 5: <Texture ID> = ???? Complete ICAO Code, four letters The complete ICAO Code will define the Airport, where the textures are used. Always the highest available Level will be used. 1 Link to comment Share on other sites More sharing options...
Guest cptawsom Posted June 16, 2012 Share Posted June 16, 2012 AES can coexist well, with GSX. Link to comment Share on other sites More sharing options...
dmitry-v-b 2 Posted July 11, 2012 Share Posted July 11, 2012 When the AES will be implemented Ekaterinburg X? Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted July 11, 2012 Author Developer Share Posted July 11, 2012 When the AES will be implemented Ekaterinburg X? Later, needs an update of the Scenery, but the developer is in holidays this month. So I expect it is not done for the next AES Update. 1 Link to comment Share on other sites More sharing options...
regueiro 35 Posted July 11, 2012 Share Posted July 11, 2012 hummm........new AES this month that sounds very good Link to comment Share on other sites More sharing options...
ngxmta 0 Posted August 1, 2012 Share Posted August 1, 2012 The download doesn't work... Link to comment Share on other sites More sharing options...
KyleD 1027 Posted August 1, 2012 Share Posted August 1, 2012 The download doesn't work... Tonight they are doing maintenance on their server hardware, the server, files, and anything else affected including the AES download should be up and running tomorrow. Link to comment Share on other sites More sharing options...
SBlauw 2 Posted August 6, 2012 Share Posted August 6, 2012 I installed v2.23a twice, but Philadelphia won't show up in the list of installed airports. In fact, it won't even show up in the airport list at all. How can that be? Stefan Link to comment Share on other sites More sharing options...
KyleD 1027 Posted August 6, 2012 Share Posted August 6, 2012 I installed v2.23a twice, but Philadelphia won't show up in the list of installed airports. In fact, it won't even show up in the airport list at all. How can that be? Stefan Depends on which platform you are talking about. FSX- not done yet if I'm not mistaken, coming with release of 2.24 FS9- If it isn't showing up then yes, it's an issue Link to comment Share on other sites More sharing options...
SBlauw 2 Posted August 6, 2012 Share Posted August 6, 2012 FSX- not done yet if I'm not mistaken, coming with release of 2.24 Oh, thought both were done! Then there is no issue indeed. Thanks! Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted August 6, 2012 Author Developer Share Posted August 6, 2012 Oh, thought both were done! Then there is no issue indeed. Thanks! Please check the Airportlist, there you can see the "X" is missing for FSX, but will follow soon with 2.24 Link to comment Share on other sites More sharing options...
ngxmta 0 Posted August 7, 2012 Share Posted August 7, 2012 I know its a bit late,but what about LIVE IN FSX-RHODES LGRP? Well it be in (if we look forwoard) In AES2.25? Link to comment Share on other sites More sharing options...
Recommended Posts