oyan 0 Posted October 20, 2018 Share Posted October 20, 2018 Hallo liebe Leute, ich habe seid Captain deutliche Probleme. Jetzt nach dem Update auf Mojave reagiert X Pfanne gar nicht mehr. Ich brauche dringend Hilfe von euch. Kann mir jemand helfen? Danke im Voraus Grüße Carsten Analyse von „X-Plane 10.51r2“.txt Link to comment Share on other sites More sharing options...
oyan 0 Posted October 20, 2018 Author Share Posted October 20, 2018 Hier noch einmal der Anhang: log.txt for X-Plane 10.51r2 (build 105101 64-bit) compiled on Oct 18 2016 20:10:54 X-Plane started on Sat Oct 20 21:09:09 2018 This log file is generated automatically by Laminar Research applications and contains diagnostics about your graphics hardware, installation, and any error conditions. If you need to contact tech support or file a bug, please send us this file. NOTE: this file is rewritten every time you start ANY of your X-System applications. Mac OS X: Version 10.14 (Build 18A391) CPU type: Intel(R) Core(TM) i7-3615QM CPU @ 2.30GHz CPU speed (mhz): 2300 Bus speed (mhz): 100 RAM (MB): 8192 X-System folder:'/Users/CB/X-Plane 10/', case sensitive=0 OpenGL Vendor : NVIDIA Corporation OpenGL Render : NVIDIA GeForce GT 650M OpenGL Engine OpenGL Version : 2.1 NVIDIA-12.0.19 355.11.10.50.10.103 (210/0) OpenGL Extensions: GL_ARB_color_buffer_float GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_instanced_arrays GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_provoking_vertex GL_ARB_seamless_cube_map GL_ARB_shader_objects GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shadow GL_ARB_sync GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_mirrored_repeat GL_ARB_texture_non_power_of_two GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_transpose_matrix GL_ARB_vertex_array_bgra GL_ARB_vertex_blend GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_clip_volume_hint GL_EXT_compiled_vertex_array GL_EXT_debug_label GL_EXT_debug_marker GL_EXT_depth_bounds_test GL_EXT_draw_buffers2 GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture_array GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_s3tc GL_EXT_texture_env_add GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_rectangle GL_EXT_texture_shared_exponent GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_timer_query GL_EXT_transform_feedback GL_EXT_vertex_array_bgra GL_APPLE_aux_depth_stencil GL_APPLE_client_storage GL_APPLE_element_array GL_APPLE_fence GL_APPLE_float_pixels GL_APPLE_flush_buffer_range GL_APPLE_flush_render GL_APPLE_object_purgeable GL_APPLE_packed_pixels GL_APPLE_pixel_buffer GL_APPLE_rgb_422 GL_APPLE_row_bytes GL_APPLE_specular_vector GL_APPLE_texture_range GL_APPLE_transform_hint GL_APPLE_vertex_array_object GL_APPLE_vertex_array_range GL_APPLE_vertex_point_size GL_APPLE_vertex_program_evaluators GL_APPLE_ycbcr_422 GL_ATI_separate_stencil GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_ATI_texture_mirror_once GL_IBM_rasterpos_clip GL_NV_blend_square GL_NV_conditional_render GL_NV_depth_clamp GL_NV_fog_distance GL_NV_fragment_program_option GL_NV_fragment_program2 GL_NV_light_max_exponent GL_NV_multisample_filter_hint GL_NV_point_sprite GL_NV_texgen_reflection GL_NV_texture_barrier GL_NV_vertex_program2_option GL_NV_vertex_program3 GL_SGIS_generate_mipmap GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod threaded_avail : 1 aniso_avail : 1 timer_avail : 1 sync/fence : 1 pbo_avail : 1 frameblit_avail : 1 gpu_shad4_avail : 1 shad_lod_avail : 1 array_tex_avail : 1 texture_rg : 1 tex_float_avail : 1 seamless_avail : 1 drawbuf2_avail : 1 packed_stencil : 1 framebuffer_srgb : 1 copy_buf_avail : 0 ubo_avail : 0 gshader_avail : 1 base_vert_avail : 1 instance_avail : 1 dis_fog_avail : 1 pinned_avail : 0 debug_avail : 0 max tex units : 8 (16/8) max iso filtering: 16.000000 max texture size : 16384 (hardware limit) max point size : 189.875000 idx in vram : 1 GLSL Version :1.20/120 first-gen shaders: 0 (16/4096/124/16/16/4096/4096) This video card is: DX10 or 11 - With instancing CPU count : 8 OpenAL devices: Built-in Output Open AL default device:Built-in Output OpenAL vendor : Apple Computer Inc. OpenAL renderer : Software OpenAL version : 1.1 OpenAL hardware : Built-in Output OpenAL extensions: ALC_EXT_CAPTURE ALC_ENUMERATION_EXT ALC_EXT_MAC_OSX ALC_EXT_ASA ALC_EXT_ASA_DISTORTION ALC_EXT_ASA_ROGER_BEEP AL_EXT_OFFSET AL_EXT_LINEAR_DISTANCE AL_EXT_EXPONENT_DISTANCE AL_EXT_float32 AL_EXT_STATIC_BUFFER AL_EXT_SOURCE_NOTIFICATIONS AL_EXT_SOURCE_SPATIALIZATION Fetching plugins for /Users/CB/X-Plane 10/Resources/plugins Loaded: /Users/CB/X-Plane 10/Resources/plugins/PluginAdmin/mac.xpl (xpsdk.examples.pluginadmin). ==== CHANGING LANGUAGE TO: Deutsch. ==== ERROR: language file line 'AOA-20====' missing right side translation. ERROR: language file line 'AOA-180====' missing right side translation. ERROR: language file line 'Wing L/D====' missing right side translation. ERROR: language file line 'linear range { This is the range of angle of attack (from 0 in either direction) that provides a linear increase in lift.====' missing right side translation. ERROR: language file line 'lift power { Tune this number so the lift curve transitions smoothly into the stall.====' missing right side translation. ERROR: language file line 'stall drop { This is an indication of how sharp the stall is... a foil with a sharper stall will lose lift more abruptly when the wing goes to too high an angle of attack. A larger number here will result in a more sudden stall with a sharper drop of the airplane in flight.====' missing right side translation. ERROR: language file line 'stall power { Tune this number so the lift curve transitions smoothly after the stall.====' missing right side translation. ERROR: language file line 'stalled drop { This is an indication of how much lift is lost after the stall... thick and supercritical airfoils lose little lift, but thin low-drag airfoils lose a lot of lift here.====' missing right side translation. ERROR: language file line 'min-cd cl { This is the coefficient of lift at which the minimum drag coefficient is achieved. It is probably close to the lift intercept value you entered above.====' missing right side translation. ERROR: language file line 'cd alpha=10 { This is the parasite drag coefficient of the airfoil at an angle of attack of 10 degrees.====' missing right side translation. ERROR: language file line 'cd power { This number is theoretically close to 2.0, but you can tune it to fit actual data.====' missing right side translation. ERROR: language file line 'buck cl { Some airfoils have a certain angle of attack range where the airflow is laminar, resulting in very low drag. This is the lift coefficient of the laminar flow low-drag bucket, if any.====' missing right side translation. ERROR: language file line 'buck width { This is how wide the low-drag laminar flow bucket is, in terms of lift coefficient. It is the lift coefficient range across which drag is reduced by laminar flow.====' missing right side translation. ERROR: language file line 'buck depth { This is how much the coefficient of drag is reduced by laminar flow (if any).====' missing right side translation. ERROR: language file line 'buck power { This is the power of curvature of the low-drag laminar flow bucket... 2.0 might be good guess.====' missing right side translation. ERROR: language file line 'cm -20 { This is the coefficient of pitching moment at -20 degrees angle of attack. The pitch moment is an indication of how much the airfoil tends to twist UP. Since airfoils almost always pitch DOWN, this number is almost always negative.====' missing right side translation. ERROR: language file line 'cm alpha 1 { This is the coefficient of pitching moment at the pitch-moment change entered above. The pitch moment is an indication of how much the airfoil tends to twist UP. Since airfoils almost always pitch DOWN, this number is almost always negative.====' missing right side translation. ERROR: language file line 'cm alpha 2 { This is the coefficient of pitching moment at the pitch-moment change entered above. The pitch moment is an indication of how much the airfoil tends to twist UP. Since airfoils almost always pitch DOWN, this number is almost always negative.====' missing right side translation. ERROR: language file line 'cm 20 { This is the coefficient of pitching moment at 20 degrees angle of attack. The pitch moment is an indication of how much the airfoil tends to twist UP. Since airfoils almost always pitch DOWN, this number is almost always negative.====' missing right side translation. ERROR: language file line 'AR|to use for L/D estimation at right and below====' missing right side translation. ERROR: language file line 'e|to use for L/D estimation at right and below====' missing right side translation. ERROR: language file line 'Dataref-Out====' missing right side translation. ERROR: language file line '{ This data will go to an IP address. See the Net Conenctions screen, Data tab to set the IP address!====' missing right side translation. ERROR: language file line 'time zoom { This is how much to zoom in on the data.====' missing right side translation. ERROR: language file line 'value zoom { This is how much to zoom in on the data.====' missing right side translation. ERROR: language file line 'Select Datarefs====' missing right side translation. ERROR: language file line 'Serial Port Specs====' missing right side translation. ERROR: language file line 'Datarefs to Read as $ + Comma-Separated Strings====' missing right side translation. ERROR: language file line 'Datarefs to Write as $ + Comma-Separated Strings====' missing right side translation. ERROR: language file line 'dataref:====' missing right side translation. ERROR: language file line 'WRITE====' missing right side translation. ERROR: language file line 'READ====' missing right side translation. ERROR: language file line 'DELETE====' missing right side translation. ERROR: language file line 'send these datarefs to the data-out IP address { This data will go to an IP address. See the Net Conenctions screen, Data tab to set the IP address!====' missing right side translation. ERROR: language file line 'send these datarefs to a com port====' missing right side translation. ERROR: language file line 'com-port====' missing right side translation. ERROR: language file line 'Port #====' missing right side translation. ERROR: language file line ' not opened yet: Dataref com-port output not yet turned on.====' missing right side translation. ERROR: language file line 'Write: Cannot open port #====' missing right side translation. ERROR: language file line 'Read: Cannot open port #====' missing right side translation. ERROR: language file line ' can open. Sent ====' missing right side translation. ERROR: language file line ' bytes so far.====' missing right side translation. ERROR: language file line ' can open. Got ====' missing right side translation. ERROR: language file line 'frame rate |f-act /sec f-sim /sec frame time cpu time gpu time grnd ratio flit ratio====' missing right side translation. ERROR: language file line 'times | real time totl time missn time timer time zulu time local time hobbs time====' missing right side translation. ERROR: language file line 'sim stats |explo DIM explo USE cratr DIM cratr USE puffs TOT puffs VIS tris vis q depth====' missing right side translation. ERROR: language file line 'speeds | Vind kias Vind keas Vtrue ktas Vtrue ktgs Vind mph Vtrue mphas Vtrue mphgs====' missing right side translation. ERROR: language file line 'Mach, VVI, G-load | Mach ratio VVI fpm Gload norml Gload axial Gload side ====' missing right side translation. ERROR: language file line 'atmosphere: weather |SLprs inHG SLtmp degC wind speed wind dir trb locl prec locl hail locl====' missing right side translation. ERROR: language file line 'atmosphere: aircraft |AMprs inHG AMtmp degC LEtmp degC dens ratio A ktas Q psf gravi fts2====' missing right side translation. ERROR: language file line 'system pressures |baro inHG edens part vacum ratio vacum ratio elec ratio elec ratio AHRS ratio AHRS ratio====' missing right side translation. ERROR: language file line 'joystick ail/elv/rud | elev yoke1 ailrn yoke1 ruddr yoke1 ====' missing right side translation. ERROR: language file line 'other flight controls| vect rqst sweep rqst incid rqst dihed rqst retra rqst water jetts====' missing right side translation. ERROR: language file line 'trim/flap/slat/s-brakes | trim elev trim ailrn trim ruddr flap handl flap postn slat ratio sbrak handl sbrak postn====' missing right side translation. ERROR: language file line 'gear/brakes | gear 0/1 wbrak part lbrak add rbrak add ====' missing right side translation. ERROR: language file line 'angular moments | M ftlb L ftlb N ftlb ====' missing right side translation. ERROR: language file line 'AoA, side-slip, paths|alpha deg beta deg hpath deg vpath deg slip deg====' missing right side translation. ERROR: language file line 'lat, lon, altitude| lat deg lon deg alt ftmsl alt ftagl on runwy alt ind lat south lon west====' missing right side translation. ERROR: language file line 'loc, vel, dist traveled| X m Y m Z m vX m/s vY m/s vZ m/s dist ft dist nm====' missing right side translation. ERROR: language file line 'all planes: lat|lat 1 deg lat 2 deg lat 3 deg lat 4 deg lat 5 deg lat 6 deg lat 7 deg lat 8 deg====' missing right side translation. ERROR: language file line 'all planes: lon|lon 1 deg lon 2 deg lon 3 deg lon 4 deg lon 5 deg lon 6 deg lon 7 deg lon 8 deg====' missing right side translation. ERROR: language file line 'all planes: alt|alt 1 ftmsl alt 2 ftmsl alt 3 ftmsl alt 4 ftmsl alt 5 ftmsl alt 6 ftmsl alt 7 ftmsl alt 8 ftmsl====' missing right side translation. ERROR: language file line 'throttle command|thro1 part thro2 part thro3 part thro4 part thro5 part thro6 part thro7 part thro8 part====' missing right side translation. ERROR: language file line 'throttle actual|thro1 part thro2 part thro3 part thro4 part thro5 part thro6 part thro7 part thro8 part====' missing right side translation. ERROR: language file line 'carb heat setting |heat1 ratio heat2 ratio heat3 ratio heat4 ratio heat5 ratio heat6 ratio heat7 ratio heat8 ratio====' missing right side translation. ERROR: language file line 'cowl flap setting |cowl1 set cowl2 set cowl3 set cowl4 set cowl5 set cowl6 set cowl7 set cowl8 set====' missing right side translation. ERROR: language file line 'engine thrust |thrst 1,lb thrst 2,lb thrst 3,lb thrst 4,lb thrst 5,lb thrst 6,lb thrst 7,lb thrst 8,lb====' missing right side translation. ERROR: language file line 'engine torque |trq 1 ftlb trq 2 ftlb trq 3 ftlb trq 4 ftlb trq 5 ftlb trq 6 ftlb trq 7 ftlb trq 8 ftlb====' missing right side translation. ERROR: language file line 'engine RPM |rpm 1 engin rpm 2 engin rpm 3 engin rpm 4 engin rpm 5 engin rpm 6 engin rpm 7 engin rpm 8 engin====' missing right side translation. ERROR: language file line 'prop pitch |ptch1 deg ptch2 deg ptch3 deg ptch4 deg ptch5 deg ptch6 deg ptch7 deg ptch8 deg====' missing right side translation. ERROR: language file line 'N1 |N1 1 pcnt N1 2 pcnt N1 3 pcnt N1 4 pcnt N1 5 pcnt N1 6 pcnt N1 7 pcnt N1 8 pcnt====' missing right side translation. ERROR: language file line 'N2 |N2 1 pcnt N2 2 pcnt N2 3 pcnt N2 4 pcnt N2 5 pcnt N2 6 pcnt N2 7 pcnt N2 8 pcnt====' missing right side translation. ERROR: language file line 'MP |MP 1 inhg MP 2 inhg MP 3 inhg MP 4 inhg MP 5 inhg MP 6 inhg MP 7 inhg MP 8 inhg====' missing right side translation. ERROR: language file line 'FF |FF 1 lb/h FF 2 lb/h FF 3 lb/h FF 4 lb/h FF 5 lb/h FF 6 lb/h FF 7 lb/h FF 8 lb/h====' missing right side translation. ERROR: language file line 'fuel pressure |FUEP1 psi FUEP2 psi FUEP3 psi FUEP4 psi FUEP5 psi FUEP6 psi FUEP7 psi FUEP8 psi====' missing right side translation. ERROR: language file line 'generator amperage |genr1 amp genr2 amp genr3 amp genr4 amp genr5 amp genr6 amp genr7 amp genr8 amp====' missing right side translation. ERROR: language file line 'elec fuel pump on/off|pump1 0/1 pump2 0/1 pump3 0/1 pump4 0/1 pump5 0/1 pump6 0/1 pump7 0/1 pump8 0/1====' missing right side translation. ERROR: language file line 'battery on/off |batt1 0/1 batt2 0/1 batt3 0/1 batt4 0/1 batt5 0/1 batt6 0/1 batt7 0/1 batt8 0/1====' missing right side translation. ERROR: language file line 'igniter on/off |igni1 0/1 igni2 0/1 igni3 0/1 igni4 0/1 igni5 0/1 igni6 0/1 igni7 0/1 igni8 0/1====' missing right side translation. ERROR: language file line 'payload weights and CG|empty lb payld lb fuel totlb jetti lb curnt lb maxim lb cg ftref====' missing right side translation. ERROR: language file line 'aero forces | lift lb drag lb side lb ====' missing right side translation. ERROR: language file line 'landing gear vert force| gear lb gear lb gear lb gear lb gear lb gear lb gear lb gear lb====' missing right side translation. ERROR: language file line 'landing gear deployment| gear rat gear rat gear rat gear rat gear rat gear rat gear rat gear rat====' missing right side translation. ERROR: language file line 'defs: ailerons 1 |Lailn 1,deg Railn 1,deg Lailn 1,deg Railn 1,deg Lailn 1,deg Railn 1,deg Lailn 1,deg Railn 1,deg====' missing right side translation. ERROR: language file line 'defs: ailerons 2 |Lailn 2,deg Railn 2,deg Lailn 2,deg Railn 2,deg Lailn 2,deg Railn 2,deg Lailn 2,deg Railn 2,deg====' missing right side translation. ERROR: language file line 'defs: yaw-brakes |Lyawb deg Ryawb deg Lyawb deg Ryawb deg Lyawb deg Ryawb deg Lyawb deg Ryawb deg====' missing right side translation. ERROR: language file line 'roll cyclic flapping | roll flap roll flap roll flap roll flap roll flap roll flap roll flap roll flap====' missing right side translation. ERROR: language file line 'COM 1/2 frequency|COM 1 freq COM 1 stby COM 2 freq COM 2 stby COM xmt ====' missing right side translation. ERROR: language file line 'NAV 1/2 frequency|NAV 1 freq NAV 1 stby NAV 1 type NAV 2 freq NAV 2 stby NAV 2 type ====' missing right side translation. ERROR: language file line 'NAV 1/2 OBS|NAV 1 OBS NAV 1 s-crs NAV 1 flag NAV 2 OBS NAV 2 s-crs NAV 2 flag ====' missing right side translation. ERROR: language file line 'NAV 1 deflections|NAV 1 n-typ NAV 1 to-fr NAV 1 m-crs NAV 1 r-brg NAV 1 dme-d NAV 1 h-def NAV 1 v-def ====' missing right side translation. ERROR: language file line 'NAV 2 deflections|NAV 2 n-typ NAV 2 to-fr NAV 2 m-crs NAV 2 r-brg NAV 2 dme-d NAV 2 h-def NAV 2 v-def ====' missing right side translation. ERROR: language file line 'ADF 1/2 status|ADF 1 freq ADF 1 card ADF 1 r-brg ADF 1 n-typ ADF 2 freq ADF 2 card ADF 2 r-brg ADF 2 n-typ====' missing right side translation. ERROR: language file line 'DME status| DME nav01 DME mode DME found DME dist DME speed DME time DME n-typ DME-3 freq====' missing right side translation. ERROR: language file line 'GPS status| GPS mode GPS index dist nm OBS mag crs mag rel brng hdef dots vdef dots====' missing right side translation. ERROR: language file line 'XPNDR status|trans mode trans sett trans ID trans inter ====' missing right side translation. ERROR: language file line 'MARKER status| OM morse MM morse IM morse audio activ ====' missing right side translation. ERROR: language file line 'switches 1:electrical| avio 0/1 nav lite beacn lite strob lite land lite taxi lite ====' missing right side translation. ERROR: language file line 'switches 2:EFIS| ECAM mode EFIS sel 1 EFIS sel 2 HSI sel 1 HSI sel 2 HSI arc map r-sel map range====' missing right side translation. ERROR: language file line 'switches 3:AP/f-dir/HUD| ap src fdir mode fdir ptch fdir roll HUD power HUD brite ====' missing right side translation. ERROR: language file line 'switches 4:anti-ice|deice all deice inlet deice prop deice windo deice pito1 deice pito2 deice AOA deice wing====' missing right side translation. ERROR: language file line 'switches 6:clutch/astab|prero engag prero engag clutc ratio clutc ratio art ptch art roll yaw damp auto brake====' missing right side translation. ERROR: language file line 'switches 7:misc| tot energ radal feet prop sync fethr mode puffr power water scoop arrst hook chute deply====' missing right side translation. ERROR: language file line 'annunciators: general|yawda on sbrk on GPWS warn ice warn pitot off cabin althi afthr arm ospd time====' missing right side translation. ERROR: language file line 'annunciators: engine| fuel press oil press oil temp inver warn gener warn chip detec engin fire ignit 0/1====' missing right side translation. ERROR: language file line 'autopilot arms| nav arm alt arm app arm vnav enabl vnav arm vnav time gp enabl app typ====' missing right side translation. ERROR: language file line 'autopilot modes| auto throt mode hding mode alt bac 0/1 app butn sync butn====' missing right side translation. ERROR: language file line 'autopilot values| set speed set hding set vvi dial alt vnav alt use alt sync roll sync pitch====' missing right side translation. ERROR: language file line 'weapon status| hdng delta ptch delta R d/sec Q d/sec rudd ratio elev ratio V kts dis ft====' missing right side translation. ERROR: language file line 'pressurization status| alt set vvi set alt cabin vvi cabin test time diff psi dump all bleed src====' missing right side translation. ERROR: language file line 'APU/GPU status| APU eqipd APU swtch APU runng APU N1 APU genrt GPU power====' missing right side translation. ERROR: language file line 'radar status| targ selct ====' missing right side translation. ERROR: language file line 'hydraulic status| hydr pump1 hydr pump2 hydr pump1 hydr pump2 hydr qty1 hydr qty2 hydr pres1 hydr pres2====' missing right side translation. ERROR: language file line 'elec & solar status| bus1 amp bus2 amp bus1 volt bus2 volt engin in W solar out W batt w-hr cross tie====' missing right side translation. ERROR: language file line 'icing status 1|inlet ice inlet ice prop ice prop ice pitot ice pitot ice statc ice statc ice====' missing right side translation. ERROR: language file line 'icing status 2| aoa ice aoa ice lwing ice rwing ice windo ice ====' missing right side translation. ERROR: language file line 'warning status| warn time caut time warn work caut work gear work gear warn stall warn ====' missing right side translation. ERROR: language file line 'flite-plan legs| leg # leg type leg lat leg lon ====' missing right side translation. ERROR: language file line 'hardware options|pedal nobrk pedal wibrk yoke PFC pedal PFC throt PFC cecon PFC switc PFC btogg PFC====' missing right side translation. ERROR: language file line 'camera location|camra lon camra lat camra ele camra hdng camra pitch camra roll camra clou====' missing right side translation. ERROR: language file line 'ground location| cntr X cntr Y cntr Z slope X slope Z ====' missing right side translation. ERROR: language file line 'cruise stats |solar __eta solar kW_in engin __eta engin kW_in _batt kW_in _batt _kW-h endur hours range ___nm====' missing right side translation. ERROR: language file line 'prop efficiency |Peff1 ratio Peff2 ratio Peff3 ratio Peff4 ratio Peff5 ratio Peff6 ratio Peff7 ratio Peff8 ratio====' missing right side translation. ERROR: language file line 'defs: elevators |elev1 deg elev1 deg elev2 deg elev2 deg ====' missing right side translation. ERROR: language file line 'TOTAL vert thrust vects|vert1 tvect vert2 tvect vert3 tvect vert4 tvect vert5 tvect vert6 tvect vert7 tvect vert8 tvect====' missing right side translation. ERROR: language file line 'TOTAL lat thrust vects|latr1 tvect latr2 tvect latr3 tvect latr4 tvect latr5 tvect latr6 tvect latr7 tvect latr8 tvect====' missing right side translation. ERROR: language file line 'pitch cyclic disc tilts|pitch cycli pitch cycli pitch cycli pitch cycli pitch cycli pitch cycli pitch cycli pitch cycli====' missing right side translation. ERROR: language file line 'grnd effect lift, wings|wing1 L cl* wing1 R cl* wing2 L cl* wing2 R cl* wing3 L cl* wing3 R cl* wing4 L cl* wing4 R cl*====' missing right side translation. ERROR: language file line 'grnd effect drag, wings|wing1 Lcdi* wing1 Rcdi* wing2 Lcdi* wing2 Rcdi* wing3 Lcdi* wing3 Rcdi* wing4 Lcdi* wing4 Rcdi*====' missing right side translation. ERROR: language file line 'grnd effect wash, wings|wing1 wash* wing1 wash* wing2 wash* wing2 wash* wing3 wash* wing3 wash* wing4 wash* wing4 wash*====' missing right side translation. ERROR: language file line 'grnd effect lift, stabs|hstab L cl* hstab R cl* vstb1 cl* vstb2 cl* ====' missing right side translation. ERROR: language file line 'grnd effect drag, stabs|hstab Lcdi* hstab Rcdi* vstb1 cdi* vstb2 cdi* ====' missing right side translation. ERROR: language file line 'grnd effect wash, stabs|hstab wash* hstab wash* vstb1 wash* vstb2 wash* ====' missing right side translation. ERROR: language file line 'grnd effect lift, props|prop1 cl* prop2 cl* prop3 cl* prop4 cl* prop5 cl* prop6 cl* prop7 cl* prop8 cl*====' missing right side translation. ERROR: language file line 'grnd effect drag, props|prop1 cdi* prop2 cdi* prop3 cdi* prop4 cdi* prop5 cdi* prop6 cdi* prop7 cdi* prop8 cdi*====' missing right side translation. ERROR: language file line 'pressurization status| alt set vvi set alt act vvi act test time diff psi dump all bleed src====' missing right side translation. ERROR: language file line 'warning status| warn time caut time warn work caut work gear work gear warn stall warn VRS ratio====' missing right side translation. ERROR: language file line 'Extern Visual====' missing right side translation. ERROR: language file line 'Hook this machine up to another with an ethernet cable. This is an extra cockpit, visual, map, viewpoint, or anything else! It must be connected to a master machine, which has one of the entries in the above table checked. If the views in this machine track the views on the master, use the offsets in the Rendering Options to align the view relative to the master as desired.====' missing right side translation. ERROR: language file line 'Hook this machine up to another with an ethernet cable. This will be the machine with the controls and flight model (master machine) and the other will be an extra monitor for more scenery or another cockpit instrument screen or anything else that tracks the master copy of X-Plane! The external view can either be independently controlled on the other machine or track the master machine's view.====' missing right side translation. ERROR: language file line 'average SNAP rate====' missing right side translation. ERROR: language file line 'Discontinued iPhone and iPad Apps====' missing right side translation. ERROR: language file line 'Control Pad IOS for iPhone or iPad!====' missing right side translation. ERROR: language file line 'Xavion, ForeFlight, FlyQ, WingX Pro, or SkyDemon for iPad or iPhone====' missing right side translation. ERROR: language file line 'Download Xavion, ForeFlight, FlyQ, WingX Pro, or SkyDemon from the Apple App Store.====' missing right side translation. ERROR: language file line 'Get your iPad, iPhone, or iPod touch on the same local network as this computer.====' missing right side translation. ERROR: language file line 'Then check the box below to have X-Plane drive the App.====' missing right side translation. ERROR: language file line 'Then, as you fly X-Plane, these Apps will respond as if they were in a real cockpit! Cool!====' missing right side translation. ERROR: language file line 'port that we send from | 49001 is the default====' missing right side translation. ERROR: language file line 'port that we send to iPad from | 49002 is the default====' missing right side translation. ERROR: language file line 'Sending to ====' missing right side translation. ERROR: language file line 'a multiplayer to plane #====einem(r) Mitspieler(in), Flugzeug Nr. ' does not have the same trailing spaces. ERROR: language file line ' an external monitor====' missing right side translation. ERROR: language file line ' a master machine, is external view====' missing right side translation. ERROR: language file line ' a master machine, is external IOS====' missing right side translation. ERROR: language file line ' a single-student IOS====' missing right side translation. ERROR: language file line ' a multi-student IOS====' missing right side translation. ERROR: language file line ' data output====' missing right side translation. ERROR: language file line ' FLIR imagery receiver====' missing right side translation. ERROR: language file line ' an iPhone running X-Plane Remote====' missing right side translation. ERROR: language file line ' an iPad running EFIS-App====' missing right side translation. ERROR: language file line ' a device running Xavion====' missing right side translation. ERROR: language file line ' a device running Xavion, ForeFlight, WingX Pro, SkyDemon, or FlyQ====' missing right side translation. ERROR: language file line ' a device running Control Pad====' missing right side translation. ERROR: language file line ' at IP address ====' missing right side translation. ERROR: language file line ' seconds ago, ====' missing right side translation. ERROR: language file line 'someone talking to a master machine, is position output machine====' missing right side translation. ERROR: language file line 'someone talking to an iPhone running X-Plane Remote====' missing right side translation. ERROR: language file line 'someone talking to a device running Xavion, ForeFlight, WingX Pro, SkyDemon, or FlyQ====' missing right side translation. ERROR: language file line 'someone talking to a device running Control Pad====' missing right side translation. ERROR: language file line 'someone talking to a device running Xavion====' missing right side translation. ERROR: language file line 'You asked to send FLIR but I sent none.====' missing right side translation. ERROR: language file line '|-IP of extra visual====' missing right side translation. ERROR: language file line '|-send AHRS and ADS-B data to Xavion or FlyQ for iPad or iPhone====' missing right side translation. ERROR: language file line '|-send AHRS data to ForeFlight, WingX Pro, or SkyDemon on ONE iPad or iPhone====' missing right side translation. ERROR: language file line '|-send AHRS data to ForeFlight, WingX Pro, or SkyDemon on ALL iPads or iPhones====' missing right side translation. ERROR: language file line '|-send data to X-Plane Control Pad for iPad and iPhone, at the AppStore now.====' missing right side translation. ERROR: language file line '|-(discontinued App) send data to X-Plane Remote, to use your iPhone as a joystick====' missing right side translation. ERROR: language file line '|-(discontinued App) send data to EFIS-App (also enter this ip and port into Data Output line in the Data tab)====' missing right side translation. ERROR: language file line '|-IP of data receiver (for Data Input & Output screen: Data-Set and Dataref-Out tabs)====' missing right side translation. ERROR: language file line '|-View tracks master{ Turn this on to have the remote view follow the master. Turn it off to have the remote view controlled independently.====' missing right side translation. ERROR: language file line 'Continue====' missing right side translation. ERROR: language file line 'Click on the world map to select the scenery you would like to install. Scenery that you deselect will be removed; scenery that you select will be installed. If you fly into an area with no scenery installed, you will see only ocean.====' missing right side translation. ERROR: language file line 'CANCEL INSTALLATION IN PROGRESS?====' missing right side translation. ERROR: language file line 'LONG INSTALLATION TIME EXPECTED====' missing right side translation. ERROR: language file line 'You agree to use X-Plane for non-commercial purposes only. (See X-Plane.com/pro/ for information on professional licenses.)====' missing right side translation. ERROR: language file line 'You agree to not make copies of X-Plane.====' missing right side translation. ERROR: language file line 'You agree to not distribute the artwork from X-Plane, or any derivative thereof, without permission from Laminar Research.====' missing right side translation. ERROR: language file line 'I agree to the terms of the EULA====' missing right side translation. ERROR: language file line 'Send diagnostic and usage data to Laminar Research====' missing right side translation. ERROR: language file line 'Installation Name====' missing right side translation. ERROR: language file line '(The folder %1:install name% will appear on your desktop.)====' missing right side translation. ERROR: language file line 'You have more than one copy of X-Plane 10 installed on this computer.====' missing right side translation. ERROR: language file line 'Is the copy of X-Plane 10 you’re looking for missing from this list?====' missing right side translation. ERROR: language file line 'Contact Support====' missing right side translation. ERROR: language file line 'Select All====' missing right side translation. ERROR: language file line 'Select None====' missing right side translation. ERROR: language file line 'You have more than one copy of X-Plane 10 installed on this computer. ====Auf diesem Computer haben Sie mehr als eine Kopie von X-Plane 10 installiert.' does not have the same trailing spaces. ERROR: language file line 'the update.====' missing right side translation. ERROR: language file line 'the update process.====' missing right side translation. ERROR: language file line 'the installation and delete partial installation.====' missing right side translation. ERROR: language file line 'the installation process.====' missing right side translation. ERROR: language file line 'Click on the world map to select the scenery you would like to install. You can use this installer to add or remove scenery later. If you fly into an area with no scenery installed, you will see only ocean.====' missing right side translation. ERROR: language file line 'You do not have enough free disk space to install X-Plane 10 with the selected scenery; change the install location to another hard drive or select less scenery.====' missing right side translation. ERROR: language file line 'Open the installer options====' missing right side translation. ERROR: language file line 'Cancel Installation====' missing right side translation. ERROR: language file line 'Buy X-Plane Online====' missing right side translation. ERROR: language file line 'Back====' missing right side translation. ERROR: language file line 'Quit====' missing right side translation. ERROR: language file line 'INSTALLER SETTINGS====' missing right side translation. ERROR: language file line 'Done====' missing right side translation. ERROR: language file line 'Operating system to download X-Plane for====' missing right side translation. ERROR: language file line 'This can be useful if you want to install X-Plane on this computer and copy the entire X-Plane folder to another computer (maybe one without a disc drive or internet access).====' missing right side translation. ERROR: language file line 'Restart the installer to apply changes.====' missing right side translation. ERROR: language file line 'Network proxy host====' missing right side translation. ERROR: language file line 'Windows====' missing right side translation. ERROR: language file line 'macOS====' missing right side translation. ERROR: language file line 'Linux====' missing right side translation. ERROR: language file line 'Check for new betas as well as updates====' missing right side translation. ERROR: language file line 'Leave this off unless you understand the risks of using X-Plane betas!====' missing right side translation. ERROR: language file line 'I will take you to the web page where you can downoad it.====' missing right side translation. ERROR: language file line '[ Download Now ]====' missing right side translation. ERROR: language file line 'Error: ====Fehler:' does not have the same trailing spaces. ERROR: language file line 'Install Location: ====Installationsort:' does not have the same trailing spaces. ERROR: language file line 'The installer is about to delete the file:====' missing right side translation. ERROR: language file line 'because we no longer use this file, but it appears you have modified it.====' missing right side translation. ERROR: language file line 'Delete the Old File====' missing right side translation. ERROR: language file line 'The installer is about to install the file:====' missing right side translation. ERROR: language file line 'but it appears you have modified this file.====' missing right side translation. ERROR: language file line 'Overwrite the Old File====' missing right side translation. ERROR: language file line 'FILE CHANGES DETECTED====' missing right side translation. ERROR: language file line 'Keep the Old File====' missing right side translation. ERROR: language file line 'Cancel the Installation====' missing right side translation. ERROR: language file line 'Do this for all files in this directory====' missing right side translation. ERROR: language file line 'What would you like to do?====' missing right side translation. ERROR: language file line 'Compressed File: ====Komprimierte Datei:' does not have the same trailing spaces. ERROR: language file line 'Destination: ====Ziel:' does not have the same trailing spaces. ERROR: language file line 'bouncer|# { Enter bouncers in Plane-Maker to have datarefs that bounce in flight. Maps, old instruments, stuff lying around the cockpit, etc.====' missing right side translation. ERROR: language file line 'NO GUIDED WEAPONS BURNING====' missing right side translation. ERROR: language file line 'Ren Opts====' missing right side translation. ERROR: language file line 'Grid Adjust====' missing right side translation. ERROR: language file line 'Edge Blend====' missing right side translation. ERROR: language file line '|-Cylinder Projection { If you check this box, then the projection will be onto a cylinder rather than a flat plane, as is the OpenGl standard projection. This is commonly used for PROJECTORS, and means that the surface you are projecting on to is curved in a cylinder around the user from left to right, rather than flat, keeping a constant distance from the projector lense.====' missing right side translation. ERROR: language file line 'lateral offset|(screen ratio) { Each unit slides the screen left/right by half its width. Use -1/+1 for two screens side by side; use -2/0/+2 for three screens in a row.====' missing right side translation. ERROR: language file line 'Dome test pattern | Draw a 3-D test pattern for Dome projection.====' missing right side translation. ERROR: language file line 'Projector Grid Test Pattern | Drag the red nodes with the mouse to adjust the grid as desired! (Drag this window to get to nodes as needed)====' missing right side translation. ERROR: language file line 'Projector Grid Use In Flight | Now the image will be distorted to match any offsets you enter into the test grid.====' missing right side translation. ERROR: language file line 'grid steps|x-direction====' missing right side translation. ERROR: language file line 'grid steps|y-direction====' missing right side translation. ERROR: language file line 'RESET ALL GRID OFFSETS TO DEFAULT====' missing right side translation. ERROR: language file line 'Edge-Blend | Turn this on to do edge-blending!====' missing right side translation. ERROR: language file line '|edge width { This fades the image to black near the edge of the screen. This is useful to blend images from multiple projectors onto one big surface.====' missing right side translation. ERROR: language file line '|edge extra width { This fades the image to black near the edge of the screen. This is useful to blend images from multiple projectors onto one big surface.====' missing right side translation. ERROR: language file line 'edge width| { This fades the image to black near the edge of the screen. This is useful to blend images from multiple projectors onto one big surface.====' missing right side translation. ERROR: language file line 'edge extra width| { This fades the image to black near the edge of the screen. This is useful to blend images from multiple projectors onto one big surface.====' missing right side translation. ERROR: language file line ' | { This fades the image to black near the edge of the screen. This is useful to blend images from multiple projectors onto one big surface.====' missing right side translation. ERROR: language file line 'mount:====' missing right side translation. ERROR: language file line 'clean:====' missing right side translation. ERROR: language file line 'hazy :====' missing right side translation. ERROR: language file line 'foggy:====' missing right side translation. ERROR: language file line 'sockd:====' missing right side translation. ERROR: language file line 'strat:====' missing right side translation. ERROR: language file line 'ocast:====' missing right side translation. ERROR: language file line 'snowy:====' missing right side translation. ERROR: language file line 'hialt:====' missing right side translation. ERROR: language file line 'orbit:====' missing right side translation. ERROR: language file line 'fog, water color====' missing right side translation. ERROR: language file line 'cloud light, dark====' missing right side translation. ERROR: language file line 'light glare (sun/moon)====' missing right side translation. ERROR: language file line 'light dir (sun/moon)====' missing right side translation. ERROR: language file line 'light amb (sun/moon)====' missing right side translation. ERROR: language file line '|-near fog, km====' missing right side translation. ERROR: language file line '|-far fog, km====' missing right side translation. ERROR: language file line '|-near fog lit, km====' missing right side translation. ERROR: language file line '|-far fog lit, km====' missing right side translation. ERROR: language file line '|-near dis clip, km====' missing right side translation. ERROR: language file line '|-far dis clip, km====' missing right side translation. ERROR: language file line '|-# puffs====' missing right side translation. ERROR: language file line '|-%====' missing right side translation. ERROR: language file line 'cloud|-%====' missing right side translation. ERROR: language file line 're-load all cloud colors====' missing right side translation. ERROR: language file line 'Special====' missing right side translation. ERROR: language file line 'Airfoil====' missing right side translation. ERROR: language file line 'Weapon====' missing right side translation. ERROR: language file line 'Object====' missing right side translation. ERROR: language file line 'Wave====' missing right side translation. ERROR: language file line 'FMS====' missing right side translation. ERROR: language file line 'Flight Data====' missing right side translation. ERROR: language file line 'Log Book====' missing right side translation. ERROR: language file line 'Bitmap====' missing right side translation. ERROR: language file line 'Particle System====' missing right side translation. ERROR: language file line 'Interaction====' missing right side translation. ERROR: language file line 'Change Livery and Keep Flying====' missing right side translation. ERROR: language file line 'Re-Scan====' missing right side translation. ERROR: language file line 'Save ====' missing right side translation. ERROR: language file line '|-aircraft has this external fuel tank or external body====' missing right side translation. ERROR: language file line 'long arm|(--) { fuel tank, float, or other external body====' missing right side translation. ERROR: language file line 'lat arm|(--) { fuel tank, float, or other external body====' missing right side translation. ERROR: language file line 'vert arm|(--) { fuel tank, float, or other external body====' missing right side translation. ERROR: language file line 'ELLIPSE====' missing right side translation. ERROR: language file line 'Enter the arm and maximum weight of the passengers and cargo that you expect to carry here.====' missing right side translation. ERROR: language file line 'Then go to the next tab over to see the range of weight and balance you could encounter in flight!====' missing right side translation. ERROR: language file line 'NOTE: THIS IS ONLY FOR WEIGHT AND BALANCE INVESTIGATION FOR YOU, AND DOES NOT AFFECT X-PLANE IN ANY WAY!====' missing right side translation. ERROR: language file line 'Each red dot is a possible loading configuration. See here what range of weight and CG you could see in flight!====' missing right side translation. ERROR: language file line 'Enter weights below to see the weight and CG for that load.====' missing right side translation. ERROR: language file line 'cg|-at current test====' missing right side translation. ERROR: language file line 'weight|-at current test====' missing right side translation. ERROR: language file line 'fwd limit====' missing right side translation. ERROR: language file line '|aft limit====' missing right side translation. ERROR: language file line 'wgt min====' missing right side translation. ERROR: language file line '|wgt max====' missing right side translation. ERROR: language file line 'You installed two incompatible GPS/FMS systems on the copilot side. You probably meant to install one for the pilot and one for the copilot.\n====' missing right side translation. ERROR: language file line 'You installed two incompatible GPS/FMS systems on the pilot side. You probably meant to install one for the pilot and one for the copilot.\n====' missing right side translation. ERROR: language file line 'This clipped animating group is not correctly horizontally aligned.\n====' missing right side translation. ERROR: language file line 'This clipped animating group is not correctly vertically aligned.\n====' missing right side translation. ERROR: language file line 'You cannot use group clipping inside another group animation.\n====' missing right side translation. ERROR: language file line 'Image====' missing right side translation. ERROR: language file line 'Close the panel editor.====' missing right side translation. ERROR: language file line 'Select all instruments that use this dataref.====' missing right side translation. ERROR: language file line 'Visualization====' missing right side translation. ERROR: language file line 'Objects====' missing right side translation. ERROR: language file line 'Cockpit Object====' missing right side translation. ERROR: language file line 'Weapons====' missing right side translation. ERROR: language file line 'Light %1:number%====' missing right side translation. ERROR: language file line 'arms { Z center of the speedbrake hinge (positive aft)====' missing right side translation. ERROR: language file line '{ X center of the speedbrake hinge (positive right)====' missing right side translation. ERROR: language file line '|(--) { Y center of the speedbrake hinge (positive up)====' missing right side translation. ERROR: language file line '|direction of extension { This is the direction in which the speedbrake extends. A zero angle extends the speedbrake upwards, -90 to the left, +90 to the right, and 180 down.====' missing right side translation. ERROR: language file line 'retracted angle, degrees { This is the angle, relative to straight back, of the speedbrake when retracted. Adjust this angle so the speedbrake door is flush with the fuselage - this is the zero drag reference angle for the flight model.====' missing right side translation. ERROR: language file line '|extended angle, degrees { This is the angle, relative to straight back, of the speedbrake when extended. Use positive values for extension.====' missing right side translation. ERROR: language file line '-steers with gear | { Check this to let the light steer with the landing gear steering!====' missing right side translation. ERROR: language file line '-Leading edge offset====' missing right side translation. ERROR: language file line '-Trailing edge offset====' missing right side translation. ERROR: language file line '-aoa|====' missing right side translation. ERROR: language file line '-Chord ratio====' missing right side translation. ERROR: language file line '-Chord offset====' missing right side translation. ERROR: language file line '-Rib chord====' missing right side translation. ERROR: language file line '-Element MAC====' missing right side translation. ERROR: language file line '-Element S====' missing right side translation. ERROR: language file line 'Cockpit====' missing right side translation. ERROR: language file line 'Interior Lights====' missing right side translation. ERROR: language file line 'Exterior Lights====' missing right side translation. ERROR: language file line 'Spoolup/Boost====' missing right side translation. ERROR: language file line 'Nacelle 1====' missing right side translation. ERROR: language file line 'Nacelle 2====' missing right side translation. ERROR: language file line 'Nacelle 3====' missing right side translation. ERROR: language file line 'Nacelle 4====' missing right side translation. ERROR: language file line 'Nacelle 5====' missing right side translation. ERROR: language file line 'Nacelle 6====' missing right side translation. ERROR: language file line 'Nacelle 7====' missing right side translation. ERROR: language file line 'Nacelle 8====' missing right side translation. ERROR: language file line 'W-Fairing 1====' missing right side translation. ERROR: language file line 'W-Fairing 2====' missing right side translation. ERROR: language file line 'W-Fairing 3====' missing right side translation. ERROR: language file line 'W-Fairing 4====' missing right side translation. ERROR: language file line 'W-Fairing 5====' missing right side translation. ERROR: language file line 'W-Fairing 6====' missing right side translation. ERROR: language file line 'W-Fairing 7====' missing right side translation. ERROR: language file line 'W-Fairing 8====' missing right side translation. ERROR: language file line 'W-Fairing 9====' missing right side translation. ERROR: language file line 'W-Fairing 10====' missing right side translation. ERROR: language file line 'Misc Wing 1====' missing right side translation. ERROR: language file line 'Misc Wing 2====' missing right side translation. ERROR: language file line 'Misc Wing 3====' missing right side translation. ERROR: language file line 'Misc Wing 4====' missing right side translation. ERROR: language file line 'Misc Wing 5====' missing right side translation. ERROR: language file line 'Misc Wing 6====' missing right side translation. ERROR: language file line 'Misc Wing 7====' missing right side translation. ERROR: language file line 'Misc Wing 8====' missing right side translation. ERROR: language file line 'Misc Wing 9====' missing right side translation. ERROR: language file line 'Misc Wing 10====' missing right side translation. ERROR: language file line 'Misc Wing 11====' missing right side translation. ERROR: language file line 'Misc Wing 12====' missing right side translation. ERROR: language file line 'Misc Wing 13====' missing right side translation. ERROR: language file line 'Misc Wing 14====' missing right side translation. ERROR: language file line 'Misc Wing 15====' missing right side translation. ERROR: language file line 'Misc Wing 16====' missing right side translation. ERROR: language file line 'Misc Wing 17====' missing right side translation. ERROR: language file line 'Misc Wing 18====' missing right side translation. ERROR: language file line 'Misc Wing 19====' missing right side translation. ERROR: language file line 'Misc Wing 20====' missing right side translation. ERROR: language file line 'Misc Body 1====' missing right side translation. ERROR: language file line 'Misc Body 2====' missing right side translation. ERROR: language file line 'Misc Body 3====' missing right side translation. ERROR: language file line 'Misc Body 4====' missing right side translation. ERROR: language file line 'Misc Body 5====' missing right side translation. ERROR: language file line 'Misc Body 6====' missing right side translation. ERROR: language file line 'Misc Body 7====' missing right side translation. ERROR: language file line 'Misc Body 8====' missing right side translation. ERROR: language file line 'Misc Body 9====' missing right side translation. ERROR: language file line 'Misc Body 10====' missing right side translation. ERROR: language file line 'Misc Body 11====' missing right side translation. ERROR: language file line 'Misc Body 12====' missing right side translation. ERROR: language file line 'Misc Body 13====' missing right side translation. ERROR: language file line 'Misc Body 14====' missing right side translation. ERROR: language file line 'Misc Body 15====' missing right side translation. ERROR: language file line 'Misc Body 16====' missing right side translation. ERROR: language file line 'Misc Body 17====' missing right side translation. ERROR: language file line 'Misc Body 18====' missing right side translation. ERROR: language file line 'Misc Body 19====' missing right side translation. ERROR: language file line 'Misc Body 20====' missing right side translation. ERROR: language file line 'Weight & Bal====' missing right side translation. ERROR: language file line 'Tanks====' missing right side translation. ERROR: language file line 'CG Set====' missing right side translation. ERROR: language file line 'CG Check====' missing right side translation. ERROR: language file line 'name for X-Plane UI { The name of the aircraft as it appears in the interface.====' missing right side translation. ERROR: language file line 'tail number for ATC { This is the tail number of the aircraft.====' missing right side translation. ERROR: language file line 'ICAO code for ATC====' missing right side translation. ERROR: language file line 'aircraft author====' missing right side translation. ERROR: language file line 'design studio====' missing right side translation. ERROR: language file line 'aircraft description====' missing right side translation. ERROR: language file line '|-Airliner { Check this box if the aircraft is an airliner. This is for finding aircraft by classification in X-Plane.====' missing right side translation. ERROR: language file line '|-General Aviation { Check this box if the aircraft is a general aviation aircraft. This is for finding aircraft by classification in X-Plane.====' missing right side translation. ERROR: language file line '|-Glider { Check this box if the aircraft is a glider. This is for finding aircraft by classification in X-Plane.====' missing right side translation. ERROR: language file line '|-Experimental { Check this box if the aircraft is experimental. This is for finding aircraft by classification in X-Plane.====' missing right side translation. ERROR: language file line '|-Helicopter { Check this box if the aircraft is a helicopter. This is for finding aircraft by classification in X-Plane.====' missing right side translation. ERROR: language file line '|-Military { Check this box if the aircraft is a military aircraft. This is for finding aircraft by classification in X-Plane.====' missing right side translation. ERROR: language file line '|-Seaplane { Check this box if the aircraft is a seaplane. This is for finding aircraft by classification in X-Plane.====' missing right side translation. ERROR: language file line '|-Science Fiction { Check this box if the aircraft comes from science fiction. This is for finding aircraft by classification in X-Plane.====' missing right side translation. ERROR: language file line '|-VTOL { Check this box if the aircraft is capable of vertical takeoffs & landings. This is for finding aircraft by classification in X-Plane.====' missing right side translation. ERROR: language file line '|-Ultralight { Check this box if the aircraft is an ultralight. This is for finding aircraft by classification in X-Plane.====' missing right side translation. ERROR: language file line 'manufacturer { This is for finding aircraft by classification in X-Plane.====' missing right side translation. ERROR: language file line 'specify manufacturer { This is for finding aircraft by classification in X-Plane.====' missing right side translation. ERROR: language file line 'only airports on map { If your moving map does not show helipads and seaports, then check that here.====' missing right side translation. ERROR: language file line '|only paved runways on map { If your moving map does not show airports with grass runways, then check that here.====' missing right side translation. ERROR: language file line 'show exterior aircraft structure and props in:|2-d forward panel views { Set this to show the outside of your aircraft geometry in the forward 2-d panel view. Use this to see your aircraft wings or prop disc from the 2-d panel view.====' missing right side translation. ERROR: language file line '|2-d no panel views { Set this to show the 3-d cockpit object when the user is in 2-d no panel views.====' missing right side translation. ERROR: language file line '|2-d no panel views { Set this to draw the outside of your aircraft geometry in 2-d no panel views.====' missing right side translation. ERROR: language file line 'show inside aircraft structure and props in:|2-d forward panel views { Set this to show the inside of your aircraft geometry in the forward 2-d panel view. Usually this is not needed.====' missing right side translation. ERROR: language file line '|2-d no panel views { Set this to draw the inside of your aircraft geometry in 2-d no panel views.====' missing right side translation. ERROR: language file line '# { For landing lights, this affects which index controls this light. For beacons and strobes, this controls its step in the flash sequence, if you use a plugin to create a custom flash sequence.====' missing right side translation. ERROR: language file line 'length| { How far the light shines in meters====' missing right side translation. ERROR: language file line '|width { The width of the light cone in degrees====' missing right side translation. ERROR: language file line 'rgb { You can tint the spill cast by this light. This is an RGB triplet from 0 to 1====' missing right side translation. ERROR: language file line '|Hide { Hide this light. If you have built your lights in your OBJs, check this to prevent Plane-Maker frmo drawing a second copy of the light.====' missing right side translation. ERROR: language file line 'has winching hook to be towed { This is the hook you use to be towed by other craft, or to be winched.====' missing right side translation. ERROR: language file line 'has towing hook to tow other craft { This is the hook you use to tow other craft!====' missing right side translation. ERROR: language file line 'has boarding door 1====' missing right side translation. ERROR: language file line 'has boarding door 2====' missing right side translation. ERROR: language file line 'has fueling truck 1====' missing right side translation. ERROR: language file line 'has fueling truck 2====' missing right side translation. ERROR: language file line 'has food-truck 1====' missing right side translation. ERROR: language file line 'has food-truck 2====' missing right side translation. ERROR: language file line 'has baggage-truck 1====' missing right side translation. ERROR: language file line 'has baggage-truck 2====' missing right side translation. ERROR: language file line 'has baggage-truck 3====' missing right side translation. ERROR: language file line 'has baggage-truck 4====' missing right side translation. ERROR: language file line 'has crew-car 1====' missing right side translation. ERROR: language file line 'has crew-car 2====' missing right side translation. ERROR: language file line 'has ground power cart====' missing right side translation. ERROR: language file line '|long, lat, vert arm (--)====' missing right side translation. ERROR: language file line 'ang{ This is the angle of the lowest value we can display. You can wrap from 0 to 720 for 2 rotations, or 0 to NEGATIVE 360 to go backwards once, for example! Enter any angles you like, even negative ones, and even values well greater than 360. Zero is obviously the top of the instrument.====' missing right side translation. ERROR: language file line 'critical altitude | (max altitude at which full power available at zero speed) { Engines generally put out less power at high altitude due to thinner air, but turbocharging can keep packing in air even at high altitudes. The critical altitude is the highest altitude at which the engine can still put out FULL POWER. This altitude can be above sea-level either by putting a turbocharger on a reciprocating engine or down-rating a jet or turboprop. Enter 0 for the critical altitude here if you are doing neither.====' missing right side translation. ERROR: language file line '|FADEC automatically keeps engines from exceeding max allowable power or thrust { This option lets the engines on this plane be controlled by Full Authority Digital Engine Control systems.====' missing right side translation. ERROR: language file line 'throttle available at max lever, one engine failed | (throttle) { This is the throttle that is available when an engine failure has occurred.====' missing right side translation. ERROR: language file line 'throttle available at max lever, all engines running | (throttle) { This is maximum throttle that the engine can be set to in X-Plane with all engines operative. ALL ENGINE SPECS (RPM, MANIFOLD PRESSURE, MAX EGT AND ITT, MAX POWER, EVERYTHING, ARE SET IN PLANE-MAKER FOR 100% POWER. GOING ABOVE 100% POWER WILL TAKE YOU ABOVE ALL THE MAX LIMITS THAT YOU ENTER HERE. (at sea-level, standard atmosphere)====' missing right side translation. ERROR: language file line 'hi idle fuel adjustment ratio to default | (fuel ratio) { X-Plane picks good estimates for the engines to idle at. But you can adjust these numbers up or down a bit from 1.00 to adjust the idling speeds of the engines up or down in X-Plane.====' missing right side translation. ERROR: language file line 'lo idle fuel adjustment ratio to default | (fuel ratio) { X-Plane picks good estimates for the engines to idle at. But you can adjust these numbers up or down a bit from 1.00 to adjust the idling speeds of the engines up or down in X-Plane.====' missing right side translation. ERROR: language file line 'go to 50% afterburner above this throttle lever position { Full burner engages above 99% throttle, so simply enter 0.99 to go right to full buner at full throttle. ENTER ZERO HERE TO LET THE THE BURNER LEVEL PANEL-SWITCH CONTROL THE BURNER LEVEL.====' missing right side translation. ERROR: language file line 'go to BETA PITCH below this throttle lever position { If the JOYSTICK throttle axis is dragged below this ratio, then the prop will go into beta.====' missing right side translation. ERROR: language file line 'go to REVERSE below this throttle lever position { If the JOYSTICK throttle axis is dragged below this ratio, then the prop will go into reverse.====' missing right side translation. ERROR: language file line 'throttle available at max reverse lever position | (throttle) { This is maximum throttle that the engine can be set to in X-Plane WHEN IN REVERSE. Go over 100% if you want to leave some reserve for emergency operations.====' missing right side translation. ERROR: language file line '|beta available { beta is neither forward nor reverse thrust. It is simply putting the prop at zero degrees pitch, throttle at idle. Doing this provides some drag without working the engine. Some twins have it. Check here if your airplane does.====' missing right side translation. ERROR: language file line '|reverse available { Prop or engine can reverse.====' missing right side translation. ERROR: language file line 'maximum power|(hp) { This is the maximum horsepower output of the engine, obtained at sea level at standard temperature and density.====' missing right side translation. ERROR: language file line 'RAM-inlet pressure recovery|(fraction) { This is the percentage of the RAM air pressure that your inlet manages to recover to increase engine power.====' missing right side translation. ERROR: language file line 'feathered pitch of prop, blue knob pulled aft | (deg) { This is the pitch of the prop when feathered, if it is a featherable prop.====' missing right side translation. ERROR: language file line 'coarse pitch of prop, governor in alpha mode | (deg) { This is the max pitch that the governor can see in normal (alpha) mode operation. Enter it in the next tab to the right.====' missing right side translation. ERROR: language file line 'fine pitch of prop, governor in alpha mode | (deg) { This is the min pitch that the governor can see in normal (alpha) mode operation. Enter it in the next tab to the right.====' missing right side translation. ERROR: language file line 'beta pitch of prop, black knob at idle | (deg) { This is the pitch of the prop when in beta, or if the throttle handle is brought to the aft stop, if it is a featherable prop.====' missing right side translation. ERROR: language file line 'reverse pitch of prop, black knob full aft | (deg) { This is the pitch of the prop when in reverse, if it is reverse-equipped in the other engine screen. Be sure to enter a negative number if the pitch is negative, as it probably is!====' missing right side translation. ERROR: language file line 'minimum prop governor RPM|(engine RPM) { If you pull the prop control back, you can lower the engine RPM to this setting. This does NOT include reverse or beta or feathered... enter the prop pitches for those things over to the left, and whatever rpm you get as a result, you get.====' missing right side translation. ERROR: language file line 'prop mass ratio to solid aluminum { This is how heavy the prop or rotor is compared to one made of pure aluminum. Composite props, for example, are lighter. Heavier props speed up and slow down more slowly, and provide more auto-rotation ability in helicopters.====' missing right side translation. ERROR: language file line '| tip weights on ROTORS, pounds, each { This is how many pounds of weight are in EACH rotor tip, increasing the rotor inertia, which is useful for helos and autogyros.====' missing right side translation. ERROR: language file line 'tip mach at 50% power (for constant-mach props) { If you selected a constant-mach prop as the prop type, then the prop governor will automatically adjust the prop pitch to speed or slow the prop to try to maintain this mach number at the prop tip at 50% power (interpolating across the throttle range of travel).====' missing right side translation. ERROR: language file line '| tip mach at 100% power (for constant-mach props) { If you selected a constant-mach prop as the prop type, then the prop governor will automatically adjust the prop pitch to speed or slow the prop to try to maintain this mach number at the prop tip at 100% power (interpolating across the throttle range of travel).====' missing right side translation. ERROR: language file line '|all engines: have throttle-governor for helos { This option is for helos only. This automatically runs the throttle up and down as needed to hold the rotor rpm at the operational rotor RPM.====' missing right side translation. ERROR: language file line '|FADEC limits RPM on all propeller engines { This option lets the engines on this plane be controlled by Full Authority Digital Engine Control systems.====' missing right side translation. ERROR: language file line '|FADEC sets fuel-air ratio on recip engines { This option lets the engines on this plane be controlled by Full Authority Digital Engine Control systems.====' missing right side translation. ERROR: language file line 'reverser area|(square feet) { This is the frontal area of each thrust reverser. This will increase drag during thrust reverser deployment.====' missing right side translation. ERROR: language file line 'fan RPM at 100% N1|(rpm)====' missing right side translation. ERROR: language file line '# prop { This is the total number of props... usually the same as the number of engines, but could be different for helos, autogyros, or lift-fan aircraft.====' missing right side translation. ERROR: language file line '{ The prop direction will indicate which way the engine torques the craft under power. For jets, this is the compressor rotation direction.====' missing right side translation. ERROR: language file line '|-vectors { This engine vectors up and down with the thrust vector if the vectored thrust option is chosen in the Helos and VTOLs window.====' missing right side translation. ERROR: language file line 'prop radius|(--) { This is the radius of the propeller, which is the DISTANCE FROM THE PROPELLER HUB CENTER OUT TO THE PROPELLER TIPS====' missing right side translation. ERROR: language file line '-|(m) { This is the tip CHORD of each propeller blade, which is the distance from the leading edge to the trailing edge of the blade. It is about 5 or 6 inches for light plane.====' missing right side translation. ERROR: language file line 'fine and coarse pitch { This is the minimum pitch that the prop should be able to go to. Zero degrees is a typical 'flat' pitch. All angles are expected to be based on the TIP of the propeller====' missing right side translation. ERROR: language file line 'number of transmissions|(#) { This is the number of independent transmissions that you have. Each transmission connects engines and props that turn together. For a single-engine plane, enter 1. For a twin-engine plane, enter 2. For something like the V-22, enter 1 (both props and engines are geared to a common transmission!) For a helicopter, enter 1 (all rotors are geared together!)====' missing right side translation. ERROR: language file line 'engine #%1:N% drives transmission #====' missing right side translation. ERROR: language file line '|this engine free-wheels { Check yes and the engine will not slow down the rotor or prop if it fails. This would be typical for a helicopter, whose rotor must continue to turn even if the engine is stopped. For almost all airplanes, though, the engine is connected directly to the prop, so the engine can NOT free-wheel... it is a rigid connection to the engine!====' missing right side translation. ERROR: language file line 'prop #%1:N% is driven by transmission #====' missing right side translation. ERROR: language file line 'minimum N1|(for fuel intro) { Turboprops only: introduce fuel ABOVE this N1 to avoid a hot-start!====' missing right side translation. ERROR: language file line 'throttle advance time from idle to maximum|(sec) { This is how many seconds it will take the throttle to advance to full (from idle) if the throttle is instantly punched to max. The turbine will take a bit longer to spin up based on the turbine spool-up time shown on this page.====' missing right side translation. ERROR: language file line 'free-turboprop spoolup time|(sec) { Free-turbine turboprops only: This is an indication of how much inertia the engine has. A larger number here will result in an engine that spools up more slowly. For a turbine, this is really how long N1 takes to speed up to max when the throttle is firewalled. Atmospheric conditions, heavy propellers, and throttle advance time can also affect the spool-up time.====' missing right side translation. ERROR: language file line 'propeller pitch rate|(degrees per second) { This is how many degrees per second the prop rotates to adjust it's pitch. 45 degrees per second is default.====' missing right side translation. ERROR: language file line 'minimum N2|(for fuel intro) { Introduce fuel ABOVE this N2 to avoid a hot-start!====' missing right side translation. ERROR: language file line 'jet spoolup time|(sec) { This is an indication of how much inertia the engine has. A larger number here will result in an engine that spools up more slowly. For a turbine, this is really how long N1 takes to speed up to max when the throttle is firewalled. Atmospheric conditions, heavy propellers, and throttle advance time can also affect the spool-up time.====' missing right side translation. ERROR: language file line 'electric engine drive efficiency|(ratio) { If you have an electric engine, this percentage of the power coming from the battery that will make it to the prop.====' missing right side translation. ERROR: language file line 'electric engine re-gen efficiency|(ratio) { If you have an electric engine with re-gen braking, enter the efficiency of that re-gen braking here, and this percentage of the power going into the prop (if any) will be loaded into the battery.====' missing right side translation. ERROR: language file line '|starter torque as a ratio of max engine torque. { Up to the design rpm, the starter will put out at least this much torque. Higher numbers get the engine up to speed faster.====' missing right side translation. ERROR: language file line '|starter design rpm as a ratio of max engine rpm. { This is how fast the starter can run the engine at its maximum torque. The starter won't go much faster than this because it will lose torque at higher RPM.====' missing right side translation. ERROR: language file line 'Starter will output %1:torque% ft-lbs at %2:rpm% rpm for %3:hp% hp.====' missing right side translation. ERROR: language file line 'Starter will reach %1:N2%% N2 in approximately %2:seconds% seconds.====' missing right side translation. ERROR: language file line 'Starter will reach %1:N1%% N1 in approximately %2:seconds% seconds.====' missing right side translation. ERROR: language file line '-Prop #1====' missing right side translation. ERROR: language file line '-Prop #====' missing right side translation. ERROR: language file line 'SET BYPASS AND INLET MACH FOR THIS PLANE, TO BE USED IN X-PLANE!====' missing right side translation. ERROR: language file line 'ENTER DATA POINTS HERE TO CHECK THRUST.====' missing right side translation. ERROR: language file line 'max efficient inlet Mach|(Mach) { This is the maximum mach number at which the inlet can pass air to the engine efficiently. Above this mach number, losses in shock waves around the inlet will reduce engine efficiency.====' missing right side translation. ERROR: language file line 'STALL WARNING====' missing right side translation. ERROR: language file line 'FMS/GPS====' missing right side translation. ERROR: language file line '|-electric gyro====' missing right side translation. ERROR: language file line '|-vacuum gyro====' missing right side translation. ERROR: language file line '-HNAV course|-GPS/LOC { Autopilot takes course to intercept in nav/loc mode from either GPS or localizer. This is what is usually found in modern airplanes, with autopilots like G1000 or S-Tec Fivty Five.====' missing right side translation. ERROR: language file line '|-OBS { Autopilot takes the course to intercept in nav/loc mode from the OBS setting of the selected nav source. Simpler autopilots like the Bendix/King KAP-140 work like this when the plane has an HSI.====' missing right side translation. ERROR: language file line '|-HDG { Autopilot takes the course to intercept in nav/loc mode from the heading bug. The Bendix-King KAP-140 works like this when no HSI is installed in the plane. Dual-mode intercepts are not possible with that type of autopilot.====' missing right side translation. ERROR: language file line '|-None { This is a very old and basic type of autopilot that can only track a VOR radial once captured, but not intercept it. It only reacts to CDI deflection. Classic Sperry autopilots work like this.====' missing right side translation. ERROR: language file line '|auto-load speed into pre-sel when ASI mode engaged { Checking this button ON is the modern convention, used in the G-1000, for example. With this type of autopilot, you simply hit the ALT button to load your current altitude.====' missing right side translation. ERROR: language file line '|auto-load VVI into pre-sel when VVI mode engaged { Checking this button ON is the modern convention, used in the G-1000, for example. With this type of autopilot, you simply hit the ALT button to load your current altitude.====' missing right side translation. ERROR: language file line '|vvi-up/dn buttons adjust pitch in pitch mode { Checking this button ON mimics some newer autopilots that let you adjust the pitch up or down a bit with the vvi buttons when in pitch mode.====' missing right side translation. ERROR: language file line '|CWS button adjusts altitude hold { Checking this button ON is the modern convention, used in the G-1000, for example. With this type of autopilot, you simply hold the CWS button while flying up or down in altitude mode to change the altitude selection.====' missing right side translation. ERROR: language file line '|roll mode defaults to OFF, not roll-hold { Checking this button ON means that the roll axis of the autopilot will default to NO ROLL CONTROL when turned on. This is unlike the Garmin 1000 convention, where the autopilot defaults to roll HOLD if turned on.====' missing right side translation. ERROR: language file line '|pitch mode defaults to OFF, not pitch-hold { Checking this button ON means that the pitch axis of the autopilot will default to NO PITCH CONTROL when turned on. This is simply a one-axis autopilot, or acts as one axis if no pitch mode is selected! This is unlike the Garmin 1000 convention, where the autopilot defaults to pitch HOLD if turned on.====' missing right side translation. ERROR: language file line 'localizer intercept to auto-engage BC|(deg, 0 for no auto-engage) { Enter 0 here to simply fly the BC localizers by manually hitting the BC button. Enter 90 deg to simulate some old Bendix-King autopilots, or 105 deg for non-Cessna G-1000's.====' missing right side translation. ERROR: language file line 'has radio-alt decision-height callout|{ If you enter a decision-height into a radio altimeter in the cockpit, you will get a callout when you get to or near that altitude.====' missing right side translation. ERROR: language file line 'has radio-alt callout advance|(ft) { SOME radio altimeters give the decision-height callout in ADVANCE of the decision-height to give you some warning. Enter that advance, in feet, here.====Radarhöhenmesser-Warnung im Voraus|(Fuß) { Manche Radarhöhenmesser rufen die Entscheidungshöhe vor dem Erreichen der Höhe aus, sozusagen als Vorwarnung. Geben Sie diese Höhendifferenz hier in Fuß ein. ' does not have the same trailing spaces. ERROR: language file line 'pilot|-use modern ARINC424 capable { If you check this, then X-Plane will use an FMS capable of all ARINC 424 leg types, which can be used for simulating Garmin, Avidyne, and modern jet avionics. Keep in mind the pilot side is the system that is exposed to plugins.====' missing right side translation. ERROR: language file line 'pilot|-use backwards-compatible FMS { If you check this, then X-Plane will use it's older simplified FMS system, which will not give fully-realistic Garmin and other avionics but is compatible with all plugins and older aircraft. Keep in mind the pilot side is the system that is exposed to plugins.====' missing right side translation. ERROR: language file line 'copilot|-use modern ARINC424 capable { If you check this, then X-Plane will use an FMS capable of all ARINC 424 leg types, which can be used for simulating Garmin, Avidyne, and modern jet avionics. Keep in mind the copilot side is currently not exposed to plugins.====' missing right side translation. ERROR: language file line 'copilot|-use backwards-compatible FMS { If you check this, then X-Plane will use it's older simplified FMS system, which will not give fully-realistic Garmin and other avionics but is compatible with all plugins and older aircraft. Keep in mind the copilot side is currently not exposed to plugins.====' missing right side translation. ERROR: language file line '|stall warning pitch and volume are controlled by angle of attack====' missing right side translation. ERROR: language file line 'TOP check to trigger MASTER CAUTION. BOTTOM check to trigger MASTER WARNING. SELECTOR for WAV FILE to play in the your aircraft's SOUNDS/CUSTOM folder.====' missing right side translation. ERROR: language file line 'Each bus may be driven by any number of generators and batteries.====' missing right side translation. ERROR: language file line 'If you have more buses than generators or batteries, then you will need the cross-tie always on!====' missing right side translation. ERROR: language file line ' goes to bus #====' missing right side translation. ERROR: language file line 'bus 1====' missing right side translation. ERROR: language file line 'bus 1-2====' missing right side translation. ERROR: language file line 'bus 1-2-3====' missing right side translation. ERROR: language file line 'bus 1-2-3, 4-====' missing right side translation. ERROR: language file line 'bus 1-2-3, 4-5====' missing right side translation. ERROR: language file line 'max MP|(max POWER, redline RPM, sea level, ISA)====' missing right side translation. ERROR: language file line 'spring k per unit mass lon, lat, vert| { ====' missing right side translation. ERROR: language file line '#====#' missing right side translation. ERROR: language file line ' { You may, optionally, assign a dataref for a switch in the sim to drive the slider, rather than having it driven by the but_command_slider switch. NOTE: YOU SHOULD PROBABLY START ASSIGNMENTS FROM #24 AND WORK DOWN, SINCE THE PRESENCE OF BUT_COMMAND_SLIDER BUTTONS ON THE PANEL WILL START AT THE FIRST SLIDER AND WORK UP!====' missing right side translation. ERROR: language file line 'ELEMENT SPECS (ROOT AT LEFT, TIP AT RIGHT)====' missing right side translation. ERROR: language file line 'You cannot attach the object '%1:file%' to this aircraft.====' missing right side translation. ERROR: language file line 'Use '%1:file%' for this aircraft.====' missing right side translation. ERROR: language file line 'This aircraft is '%1:file%'.====' missing right side translation. ERROR: language file line 'All objects attached to your aircraft must be in the aircraft's objects sub-folder.====' missing right side translation. ERROR: language file line 'shadow mode | { Controls which views this object casts shadows in. You may be able to improve framerate by limiting which objects cast shadows. For example, in an airliner with small windows there is probably no need to have the cabin seat objects cast shadows in an exterior view.====' missing right side translation. ERROR: language file line '| hi-res { Check this to use higher texture resolution on this object. This is only recommended for objects that make up the cockpit instrument panel so the instruments are sharp!====' missing right side translation. ERROR: language file line '| wreckage { Check this if this object is only shown when the aircraft is destroyed.====' missing right side translation. ERROR: language file line 'No Prefill-Prefill-Prefill Only====' missing right side translation. ERROR: language file line '{ Check this to cause X-Plane to exclude clouds behind this object. Inside the 3-d cockpit blocking out clouds can significantly improve framerate. Only do this with fully opaque, cheap-to-draw objects. If you use a translucent objects the clouds will be missing through the translucency!====' missing right side translation. ERROR: language file line '| use LOD { Check this to honor the LOD attributes in the OBJ. By default X-Plane ignores LOD on airplanes and draws them from any distance. Enable this to use LOD. Using low LODs on tiny details of your plane improves framerate in the far view; X-Plane will simply stop drawing those details when the plane is far away.====' missing right side translation. ERROR: language file line '| dim LIT { Check this to make the LIT textures appear dimmer in bright sunlight. Enabling this option can prevent your plane from looking overly lit in full sunlight.====' missing right side translation. ERROR: language file line 'Kill Dataref { When this dataref is non-zero, the object will be entirely removed from the plane. Create your own dataref to kill unneeded objects and improve performance.====' missing right side translation. ERROR: language file line 'Cockpit Object:====' missing right side translation. ERROR: language file line '| pre-fill { Check this to cause X-Plane to exclude clouds behind this object. Inside the 3-d cockpit blocking out clouds can significantly improve framerate. Only do this with fully opaque, cheap-to-draw objects. If you use a translucent objects the clouds will be missing through the translucency!====' missing right side translation. ERROR: language file line 'roll input to engage|(ratio)====' missing right side translation. ERROR: language file line 'aileron trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation. ERROR: language file line 'elevator trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation. ERROR: language file line 'rudder trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation. ERROR: language file line 'rotor trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation. ERROR: language file line '|aileron trim tab adjust { 0 is centered, -1.0 is for full left aileron, +1.0 is for right aileron.====' missing right side translation. ERROR: language file line '|elevator trim tab adjust { 0 is centered, -1.0 is for full down elevator, +1.0 is for full up elvator.====' missing right side translation. ERROR: language file line '|rudder trim tab adjust { 0 is centered, -1.0 is for full left rudder, +1.0 is for right rudder.====' missing right side translation. ERROR: language file line ' minimum rudder deflection time|seconds { Enter 0.0 to be able to deflect the controls as fast as the pilot can move the stick or the art stab system can command a deflection, as is the case with all manual control systems. If the plane has a hydraulic system and a max rate of control deflection, though, enter how long it takes to go from center to fully-deflected here.====Minimale Seitenruder-Auslenkzeit|Sekunden { Geben Sie 0.0 ein, wenn die Steuerflächen unmittelbar der Steuereingabe des Piloten oder des Stabilisierungssystems folgen soll, wie es bei manuellen Steuersystemen der Fall ist. Wenn das Flugzeug jedoch ein Hydrauliksystem mit einer maximalen Auslenkgeschwindigkeit besitzt, geben Sie die Zeit ein, die für die Fahrt von der Mittelstellung bis zur vollen Auslenkung benötigt wird.' does not have the same leading spaces. ERROR: language file line 'reference speed for pitch force|(kias) { At this indicated airspeed, the forces will be as entered here. Those forces will come up and down with the dynamic pressure, which of course runs with the square of the indicated airspeed.====' missing right side translation. ERROR: language file line 'reference speed for roll force|(kias) { At this indicated airspeed, the forces will be as entered here. Those forces will come up and down with the dynamic pressure, which of course runs with the square of the indicated airspeed.====' missing right side translation. ERROR: language file line 'reference speed for yaw force|(kias) { At this indicated airspeed, the forces will be as entered here. Those forces will come up and down with the dynamic pressure, which of course runs with the square of the indicated airspeed.====' missing right side translation. ERROR: language file line 'force for full-up-elevator|(lb) { When the control is fully-deflected, you will see this much force at the reference speed. That force will vary with the dynamic pressure on the aircraft.====' missing right side translation. ERROR: language file line 'force for full-right aileron|(lb) { When the control is fully-deflected, you will see this much force at the reference speed. That force will vary with the dynamic pressure on the aircraft.====' missing right side translation. ERROR: language file line 'force for full-right rudder|(lb) { When the control is fully-deflected, you will see this much force at the reference speed. That force will vary with the dynamic pressure on the aircraft.====' missing right side translation. ERROR: language file line 'force for maxmimum brakes|(lb) { When the control is fully-deflected, you will see this much force.====' missing right side translation. ERROR: language file line 'pitch damping|(lb/(deflections/sec)) { If you fully-deflect the controls in one second, this will be the force opposing motion. Force scales linearly with deflection rate, linearly with dynamic pressure.====' missing right side translation. ERROR: language file line 'roll damping|(lb/(deflections/sec)) { If you fully-deflect the controls in one second, this will be the force opposing motion. Force scales linearly with deflection rate, linearly with dynamic pressure.====' missing right side translation. ERROR: language file line 'yaw damping|(lb/(deflections/sec)) { If you fully-deflect the controls in one second, this will be the force opposing motion. Force scales linearly with deflection rate, linearly with dynamic pressure.====' missing right side translation. ERROR: language file line 'brake damping|(lb/(deflections/sec)) { If you fully-deflect the controls in one second, this will be the force opposing motion. Force scales linearly with deflection rate.====' missing right side translation. ERROR: language file line 'pitch force in max turbulence at reference speed|(lb) { This is going away soon, so should not be used.====' missing right side translation. ERROR: language file line 'roll force in max turbulence at reference speed|(lb) { This is going away soon, so should not be used.====' missing right side translation. ERROR: language file line 'yaw force in max turbulence at reference speed|(lb) { This is going away soon, so should not be used.====' missing right side translation. ERROR: language file line 'ground-feedback pitch force|(lb) { This is going away soon, so should not be used.====' missing right side translation. ERROR: language file line 'ground-feedback roll force|(lb) { This is going away soon, so should not be used.====' missing right side translation. ERROR: language file line 'ground-feedback yaw force|(lb) { This is going away soon, so should not be used.====' missing right side translation. ERROR: language file line '-brakes| { Just check here if you want this gear to have brakes.====' missing right side translation. ERROR: language file line '-retracts| { Just check here if you want this gear to retract.====' missing right side translation. ERROR: language file line '|-castors { Just check here if you want this gear to free-castor when the tailwheel lock is released. Enter the steering values above if you want it to steer.====' missing right side translation. ERROR: language file line '|-faired { This indicates whether a streamlined wheel fairing is over the gear, which will reduce the drag of the landing gear.====' missing right side translation. ERROR: language file line 'additional gear flatplate area|(square feet) { X-Plane already considers the frontal area of struts, tires, and doors in its landing gear drag estimates. BUT, in real airplanes, there is ADDITIONAL drag from the gear WELLS disrupting the airflow over the craft. Enter the effective flatplate area here associated with that drag to increase the drag associated with landing gear deployment. A Beech Baron, for example, might have 2 square feet of effective frontal area from this effect. ====Zusätzlicher Flächenwiderstand|(Fuß²) { X-Plane bezieht grundsätzlich die Frontalfläche von Fahrwerkbeinen, Reifen und Schachttüren in die Berechnung des Luftwiderstands schon mit ein. Aber die Fahrwerksschächte erzeugen in der Realität zusätzlichen Widerstand, da sie den Fluss stören. Hier können Sie die äquivalente Fläche eingeben, die den Widerstand auf entsprechende Weise wie die Schachtöffnung bei ausgefahrenem Fahrwerk erhöhen würde. Eine Beech Baron kann z.B. 2 Quadrat-Fuß äquivalente Frontalfläche haben, die auf diesen Effekt zurückgeht.' does not have the same trailing spaces. ERROR: language file line 'deflection when under zero load|==== Auslenkung unter Nulllast' does not have the same leading spaces. ERROR: language file line 'SLUNG LOAD / WATER / RETARDANT / OTHER AIRCRAFT LOCATION====' missing right side translation. ERROR: language file line 'long slung load / water / retardant / other aircraft attach|(--) { slung load attach point====' missing right side translation. ERROR: language file line 'lat slung load / water / retardant / other aircraft attach|(--) { slung load attach point====' missing right side translation. ERROR: language file line 'vert slung load / water / retardant / other aircraft attach|(--) { slung load attach point====' missing right side translation. ERROR: language file line 'long water / retardant tank|(--) { This is where the liquid is stored====' missing right side translation. ERROR: language file line 'lat water / retardant tank|(--) { This is where the liquid is stored====' missing right side translation. ERROR: language file line 'vert water / retardant tnak|(--) { This is where the liquid is stored====' missing right side translation. ERROR: language file line '-tank #====Tank Nr. ' does not have the same trailing spaces. ERROR: language file line 'Prop ====Propeller' does not have the same trailing spaces. ERROR: language file line 'Misc Wing ====Diverse Flügel' does not have the same trailing spaces. ERROR: language file line 'VECTORED-THRUST====' missing right side translation. ERROR: language file line 'differential collective with roll input|(when in vertical thrust vector, deg) { VTOLs like the Bell 609 will alter the collective pitch (lift) of the rotor on either side to roll the craft in hover. Enter the parameter for that here.====' missing right side translation. ERROR: language file line 'differential collective with yaw input|(when in horizontal thrust vector, deg) { VTOLs like the Bell 609 will alter the collective pitch (lift) of the rotor on either side to yaw the craft in forward flight (!) Enter the parameter for that here.====' missing right side translation. ERROR: language file line 'differential collective with pitch input|(when in vertical thrust vector, deg) { VTOLs like the X-19 have rotor towards front and towards the back of the craft... they can adjust their collective pitch in hover to pitch the aircraft.====' missing right side translation. ERROR: language file line 'differential throttle with roll input|(when in any thrust vector) { This is how simple Quad-rotor drones roll: More power on left or right side.====' missing right side translation. ERROR: language file line 'differential throttle with yaw input|(when in any thrust vector) { This is how simple Quad-rotor drones yaw: More power on CW or CCW rotors.====' missing right side translation. ERROR: language file line 'differential throttle with pitch input|(when in any thrust vector) { This is how simple Quad-rotor drones pitch: More power on left or right side====' missing right side translation. ERROR: language file line 'DIFFERENTIAL THRUST-VECTOR FOR MANEUVERING====' missing right side translation. ERROR: language file line '|auto-set cowl flaps { This option will automatically adjust the cowl flaps to maintain middle-of-the-green cylinder-head temperature.====' missing right side translation. ERROR: language file line '|auto-sync engines if the throttles are close { If you check this, then the throttles will auto-sync if they are close to try to hold the same power. You can turn this system off, though, with switches on the panel.====' missing right side translation. ERROR: language file line '|com radio equipped { Check here if the plane has com radios to catch ATIS.====' missing right side translation. ERROR: language file line '|marker beacon audio equipped { Some planes have aural marker beacon indicators, others not.====' missing right side translation. ERROR: language file line '|inverted fuel and oil systems equipped { If you check this, then the fuel and oil systems will continue to work even when in negative G. DON'T check this box? DON'T pull negative-G.====' missing right side translation. ERROR: language file line '|TCAS equipped { Check here if the plane has TCAS alerting system.====' missing right side translation. ERROR: language file line '|verbal 500 AGL callout equipped { ====' missing right side translation. ERROR: language file line '|gear warning horn equipped { Use this option if your craft is equipped with a simple warning that will activate if you do not lower your landing gear when you reduce power. This system is used on many light aircraft.====' missing right side translation. ERROR: language file line '|engine-fire bell equipped { Use this option if you want a warning bell to go off whenever an engine is... umm... on fire.====' missing right side translation. ERROR: language file line 'Make Weapon OBJ====' missing right side translation. ERROR: language file line '|-Flare { Counter-measure flare====' missing right side translation. ERROR: language file line '|-Para-Flare { Counter-measure flare with parachute====' missing right side translation. ERROR: language file line '|-Chaff { Counter-measure chaff====' missing right side translation. ERROR: language file line '|-air-to-air missile: heat-seeking (FAF) { This is an air-to-air missile, tracking heat of target after fired and forgotten.====' missing right side translation. ERROR: language file line '|-air-to-ground missile: GPS-guided { This is an air-to-ground missile, GPS-guided.====' missing right side translation. ERROR: language file line '|-air-to-ground bomb: GPS-guided { This is an air-to-ground bomb, GPS-guided.====' missing right side translation. ERROR: language file line 'Weight|(--) { ====' missing right side translation. ERROR: language file line ' warhead type { Do you really need an explanation?====Sprengkopftyp { Brauchen Sie wirklich eine Erklärung?' does not have the same leading spaces. ERROR: language file line 'drag-chute additional drag area|(ft*ft) { This is the equivalent frontal-area (Cd=1.0) of any parachutes, speedbrakes, streamers, or other devices that deploy to slow the weapon immediately after it is released.====' missing right side translation. ERROR: language file line 'SHOW ALL PARTS IN X-PLANE====' missing right side translation. ERROR: language file line 'HIDE ALL PARTS IN X-PLANE====' missing right side translation. ERROR: language file line 'SHOW PARTS, BUT NOT OBJECT, IN PLANE-MAKER====' missing right side translation. ERROR: language file line 'Use departure wizard====' missing right side translation. ERROR: language file line '* Recommended Radio Frequency====' missing right side translation. ERROR: language file line 'Click a row to tune your COM1 radio to that frequency.====' missing right side translation. ERROR: language file line 'Air Traffic Control====' missing right side translation. ERROR: language file line 'ATC has cancelled all guidance for you because you violated their instructions beyond the acceptable tolerance. You can file a new flight plan and try again if you’d like.====' missing right side translation. ERROR: language file line 'Communication with ATC will not be possible.====' missing right side translation. ERROR: language file line 'Your radios are inoperative.====' missing right side translation. ERROR: language file line 'Your aircraft power is off.====' missing right side translation. ERROR: language file line 'Your audio panel is off.====' missing right side translation. ERROR: language file line 'If you’d like to receive ATC guidance, you’ll need to first file a flight plan.====' missing right side translation. ERROR: language file line 'Requesting the proper altimeter setting from ATC allows you to calibrate your altimeter to match the airport’s elevation and current barometric pressure.====' missing right side translation. ERROR: language file line 'Tune to one of the area’s ATC frequencies to request the proper altimeter setting, which will allow you to calibrate your altimeter to match the airport’s elevation and current barometric pressure.====' missing right side translation. ERROR: language file line 'To request clearance, tune your COM radio to the frequency of the ATC controller acting as clearance delivery (indicated with an asterisk* in the table to the right).====' missing right side translation. ERROR: language file line 'To request taxi instructions, tune your COM radio to the frequency of the ATC controller acting as ground (indicated with an asterisk* in the table to the right).====' missing right side translation. ERROR: language file line 'Check in for takeoff clearance by tuning your COM radio to the frequency of the ATC controller acting as tower (indicated with an asterisk* in the table to the right).====' missing right side translation. ERROR: language file line 'File Flight Plan====' missing right side translation. ERROR: language file line 'Some fields above need your attention====' missing right side translation. ERROR: language file line 'File====' missing right side translation. ERROR: language file line 'Popup clearance (i.e., clearance requested in flight) requires no departure airport.====' missing right side translation. ERROR: language file line 'Departure ICAO====' missing right side translation. ERROR: language file line 'Airport ID====' missing right side translation. ERROR: language file line 'Arrival ICAO====' missing right side translation. ERROR: language file line 'Enroute Altitude====' missing right side translation. ERROR: language file line 'MSL====' missing right side translation. ERROR: language file line 'Route====' missing right side translation. ERROR: language file line 'Optional route with NDBs, VORs, fixes, and V/J airways, but no SIDS/STARS====' missing right side translation. ERROR: language file line 'Auto-tune recommended frequencies====' missing right side translation. ERROR: language file line 'Normally, you have to tune your COM1 radio either by hand or by clicking on the controller you want to talk to in the list. When this is checked, though, X-Plane will automatically tune your COM1 radio for you whenever the recommended controller (denoted with an asterisk) changes.====' missing right side translation. ERROR: language file line '(Radios inoperative.)====' missing right side translation. ERROR: language file line '(Aircraft Power Off.)====' missing right side translation. ERROR: language file line '(Audio Panel Off.)====' missing right side translation. ERROR: language file line 'AIRCRAFT====' missing right side translation. ERROR: language file line 'AI Aircraft====' missing right side translation. ERROR: language file line 'Back to List====' missing right side translation. ERROR: language file line 'AIRCRAFT CLASS====' missing right side translation. ERROR: language file line 'ENGINE TYPE====' missing right side translation. ERROR: language file line 'MANUFACTURER====' missing right side translation. ERROR: language file line 'DESIGN STUDIO====' missing right side translation. ERROR: language file line 'FILE PATH====' missing right side translation. ERROR: language file line 'Weight, Balance, & Fuel====' missing right side translation. ERROR: language file line 'Enable enemy combatants====' missing right side translation. ERROR: language file line 'Start with engines running====' missing right side translation. ERROR: language file line 'Glider start type:====' missing right side translation. ERROR: language file line 'Tow Plane====' missing right side translation. ERROR: language file line 'Select this option to have your glider towed aloft.====' missing right side translation. ERROR: language file line 'Winch Launch====' missing right side translation. ERROR: language file line 'Select this option to have your glider launched from a ground-based winch.====' missing right side translation. ERROR: language file line 'Fly with piggybacking Space Shuttle====' missing right side translation. ERROR: language file line 'Unknown====' missing right side translation. ERROR: language file line 'Single Engine====' missing right side translation. ERROR: language file line 'Twin Engine====' missing right side translation. ERROR: language file line 'None====' missing right side translation. ERROR: language file line 'Search by aircraft name, manufacturer, class, author, studio, file location, or file name.====' missing right side translation. ERROR: language file line 'All Classes====' missing right side translation. ERROR: language file line 'All Engine Types====' missing right side translation. ERROR: language file line 'All Manufacturers====' missing right side translation. ERROR: language file line 'All Studios====' missing right side translation. ERROR: language file line 'Search by airport name, identifier, or features (like “3D” or “gravel”).====' missing right side translation. ERROR: language file line 'No airports found.====' missing right side translation. ERROR: language file line 'Try a different search term.====' missing right side translation. ERROR: language file line 'AIRPORT NAME====' missing right side translation. ERROR: language file line 'CODE====' missing right side translation. ERROR: language file line 'FEATURES====' missing right side translation. ERROR: language file line 'FLIGHT IN PROGRESS====' missing right side translation. ERROR: language file line 'Change Location====' missing right side translation. ERROR: language file line 'Current location:====' missing right side translation. ERROR: language file line 'LOCATION====' missing right side translation. ERROR: language file line 'TIME OF DAY====' missing right side translation. ERROR: language file line 'Tracking real world time====' missing right side translation. ERROR: language file line 'WEATHER====' missing right side translation. ERROR: language file line 'Customized====' missing right side translation. ERROR: language file line 'Delete Cloud Layer====' missing right side translation. ERROR: language file line 'Top====' missing right side translation. ERROR: language file line 'ft MSL====' missing right side translation. ERROR: language file line 'Base====' missing right side translation. ERROR: language file line 'CLOUD TYPE====' missing right side translation. ERROR: language file line 'BASE====' missing right side translation. ERROR: language file line '+ Cloud Layer====' missing right side translation. ERROR: language file line '+ Wind Layer====' missing right side translation. ERROR: language file line 'Preset Conditions====' missing right side translation. ERROR: language file line 'Refresh====' missing right side translation. ERROR: language file line 'Last updated:====' missing right side translation. ERROR: language file line 'Weather download failed.====' missing right side translation. ERROR: language file line 'Downloading weather...====' missing right side translation. ERROR: language file line 'Refresh rate====' missing right side translation. ERROR: language file line 'Match real world conditions====' missing right side translation. ERROR: language file line 'LAYER PROPERTIES====' missing right side translation. ERROR: language file line 'ATMOSPHERIC CONDITIONS====' missing right side translation. ERROR: language file line 'THERMALS====' missing right side translation. ERROR: language file line 'BODIES OF WATER====' missing right side translation. ERROR: language file line 'Select a layer to edit.====' missing right side translation. ERROR: language file line 'Add or select a layer to edit.====' missing right side translation. ERROR: language file line 'Add a layer to edit.====' missing right side translation. ERROR: language file line 'Select a layer to view.====' missing right side translation. ERROR: language file line 'No wind or cloud layers to view.====' missing right side translation. ERROR: language file line 'This machine is set up to receive weather information over the network from a master machine.====' missing right side translation. ERROR: language file line 'You can edit the weather from the master machine.====' missing right side translation. ERROR: language file line 'CLOUDS====' missing right side translation. ERROR: language file line 'Add Cloud Layer====' missing right side translation. ERROR: language file line 'WIND====' missing right side translation. ERROR: language file line 'Add Wind Layer====' missing right side translation. ERROR: language file line 'Set visibility as====' missing right side translation. ERROR: language file line 'Visibility====' missing right side translation. ERROR: language file line 'sm====' missing right side translation. ERROR: language file line 'Runway visual range (RVR)====' missing right side translation. ERROR: language file line 'Precipitation====' missing right side translation. ERROR: language file line 'Storminess====' missing right side translation. ERROR: language file line 'Temperature at nearest airport====' missing right side translation. ERROR: language file line 'Barometric pressure at sea level====' missing right side translation. ERROR: language file line 'Atmospheric visibility====' missing right side translation. ERROR: language file line '°F====' missing right side translation. ERROR: language file line '°C====' missing right side translation. ERROR: language file line 'inHg====' missing right side translation. ERROR: language file line 'mbar====' missing right side translation. ERROR: language file line 'Altitude====' missing right side translation. ERROR: language file line 'ft AGL====' missing right side translation. ERROR: language file line 'Coverage====' missing right side translation. ERROR: language file line '%====' missing right side translation. ERROR: language file line 'Climb Rate====' missing right side translation. ERROR: language file line 'ft/min====' missing right side translation. ERROR: language file line 'Wave Height====' missing right side translation. ERROR: language file line 'Wave Direction====' missing right side translation. ERROR: language file line 'deg====' missing right side translation. ERROR: language file line 'VISIBILITY====' missing right side translation. ERROR: language file line 'PRECIPITATION====' missing right side translation. ERROR: language file line 'STORMINESS====' missing right side translation. ERROR: language file line 'TEMPERATURE====' missing right side translation. ERROR: language file line 'BAROMETRIC PRESSURE====' missing right side translation. ERROR: language file line 'ALTITUDE====' missing right side translation. ERROR: language file line 'COVERAGE====' missing right side translation. ERROR: language file line 'CLIMB RATE====' missing right side translation. ERROR: language file line 'WAVE HEIGHT====' missing right side translation. ERROR: language file line 'WAVE SPEED====' missing right side translation. ERROR: language file line 'WAVE LENGTH====' missing right side translation. ERROR: language file line 'WAVE DIRECTION====' missing right side translation. ERROR: language file line 'Delete Wind Layer====' missing right side translation. ERROR: language file line 'Direction====' missing right side translation. ERROR: language file line 'Speed====' missing right side translation. ERROR: language file line 'kts====' missing right side translation. ERROR: language file line 'Gust Speed Increase====' missing right side translation. ERROR: language file line 'Shear Amount====' missing right side translation. ERROR: language file line 'DIRECTION====' missing right side translation. ERROR: language file line 'SPEED====' missing right side translation. ERROR: language file line 'TURBULENCE====' missing right side translation. ERROR: language file line 'SHEAR AMOUNT====' missing right side translation. ERROR: language file line 'GUST SPEED INCREASE====' missing right side translation. ERROR: language file line 'Search by failure name====' missing right side translation. ERROR: language file line 'NO FAILURES FOUND====' missing right side translation. ERROR: language file line 'Your search did not match any failures. Try a different search term.====' missing right side translation. ERROR: language file line 'Fix All Systems====' missing right side translation. ERROR: language file line 'Resets all systems to working.====' missing right side translation. ERROR: language file line 'Set global mean time between failures====' missing right side translation. ERROR: language file line 'If checked, X-Plane will apply a mean time between failures to all systems, in addition to any failure probabilities you set in the window above.====' missing right side translation. ERROR: language file line 'hours====' missing right side translation. ERROR: language file line 'Global MTBF applies in addition to failures selected above====' missing right side translation. ERROR: language file line 'No map available====' missing right side translation. ERROR: language file line 'Airport Starts====' missing right side translation. ERROR: language file line 'Special Starts====' missing right side translation. ERROR: language file line 'Confirm====' missing right side translation. ERROR: language file line 'STARTS====' missing right side translation. ERROR: language file line 'DETAILS====' missing right side translation. ERROR: language file line 'RAMP====' missing right side translation. ERROR: language file line 'RUNWAY====' missing right side translation. ERROR: language file line 'On runway====' missing right side translation. ERROR: language file line '3 nm approach====' missing right side translation. ERROR: language file line '10 nm approach====' missing right side translation. ERROR: language file line 'Back to Other Aircraft List====' missing right side translation. ERROR: language file line 'Enemy Skill Level====' missing right side translation. ERROR: language file line 'Remove====' missing right side translation. ERROR: language file line 'Edit====' missing right side translation. ERROR: language file line 'Very Easy====' missing right side translation. ERROR: language file line 'Easy====' missing right side translation. ERROR: language file line 'Medium====' missing right side translation. ERROR: language file line 'Hard====' missing right side translation. ERROR: language file line 'Very Hard====' missing right side translation. ERROR: language file line 'OTHER AIRCRAFT====' missing right side translation. ERROR: language file line 'Add Aircraft====' missing right side translation. ERROR: language file line 'Randomize aircraft each flight====' missing right side translation. ERROR: language file line 'Month====' missing right side translation. ERROR: language file line 'Day====' missing right side translation. ERROR: language file line 'Hour====' missing right side translation. ERROR: language file line 'Minute====' missing right side translation. ERROR: language file line 'GMT Offset====' missing right side translation. ERROR: language file line 'Track real-world date & time====' missing right side translation. ERROR: language file line 'Reset to Default Armament====' missing right side translation. ERROR: language file line 'Select weapon====' missing right side translation. ERROR: language file line 'Weather Settings====' missing right side translation. ERROR: language file line 'Check this box to have X-Plane set the weather to match real-world weather reports, downloaded automatically from the Internet.====' missing right side translation. ERROR: language file line 'WEIGHT, BALANCE, & FUEL====' missing right side translation. ERROR: language file line 'TOTAL WEIGHT====' missing right side translation. ERROR: language file line 'EMPTY WEIGHT====' missing right side translation. ERROR: language file line 'MAX WEIGHT====' missing right side translation. ERROR: language file line 'FLIGHT TIME====' missing right side translation. ERROR: language file line 'NORMAL CRUISE====' missing right side translation. ERROR: language file line 'Restore Defaults====' missing right side translation. ERROR: language file line 'Left Side Fuel Total====' missing right side translation. ERROR: language file line 'Right Side Fuel Total====' missing right side translation. ERROR: language file line 'Center Fuel Total====' missing right side translation. ERROR: language file line 'Center of Gravity====' missing right side translation. ERROR: language file line 'A CG offset of zero, with zero fuel and zero ordnance, gives the CG that is listed as the default in Plane Maker. Fuel and ordnance load will offset you from the default CG according to their locations on the craft. In addition, the CG you set offsets the entire loaded mass of the aircraft from default, as might be obtained with baggage or passengers.====' missing right side translation. ERROR: language file line 'Payload Weight====' missing right side translation. ERROR: language file line 'Total Fuel Weight====' missing right side translation. ERROR: language file line 'JATO Fuel Weight====' missing right side translation. ERROR: language file line 'Jettisonable Load Weight====' missing right side translation. ERROR: language file line 'Slung Load Weight====' missing right side translation. ERROR: language file line 'Shiftable Weight====' missing right side translation. ERROR: language file line 'Just now====' missing right side translation. ERROR: language file line '1 minute ago====' missing right side translation. ERROR: language file line 'Get Me Lost====' missing right side translation. ERROR: language file line 'minutes====' missing right side translation. ERROR: language file line 'KIAS====' missing right side translation. ERROR: language file line 'ft. AGL====' missing right side translation. ERROR: language file line 'Advanced====' missing right side translation. ERROR: language file line 'Outer Marker====' missing right side translation. ERROR: language file line 'Middle Marker====' missing right side translation. ERROR: language file line 'Inner Marker====' missing right side translation. ERROR: language file line 'No nearby airports====' missing right side translation. ERROR: language file line 'Mode====' missing right side translation. ERROR: language file line 'Layers====' missing right side translation. ERROR: language file line 'Airports====' missing right side translation. ERROR: language file line 'Localizers====' missing right side translation. ERROR: language file line 'VORs====' missing right side translation. ERROR: language file line 'NDBs====' missing right side translation. ERROR: language file line 'DMEs====' missing right side translation. ERROR: language file line 'Fixes====' missing right side translation. ERROR: language file line 'Airways====' missing right side translation. ERROR: language file line 'Flight path====' missing right side translation. ERROR: language file line 'Marker beacons====' missing right side translation. ERROR: language file line 'Glideslope====' missing right side translation. ERROR: language file line 'HIDE====' missing right side translation. ERROR: language file line 'SHOW====' missing right side translation. ERROR: language file line 'VFR Sectional====' missing right side translation. ERROR: language file line 'IFR Low Enroute====' missing right side translation. ERROR: language file line 'IFR High Enroute====' missing right side translation. ERROR: language file line 'Add NDB====' missing right side translation. ERROR: language file line 'Add VOR====' missing right side translation. ERROR: language file line 'Add VOR-DME====' missing right side translation. ERROR: language file line 'Add Standalone DME====' missing right side translation. ERROR: language file line 'Add Localizer====' missing right side translation. ERROR: language file line 'Add Glideslope====' missing right side translation. ERROR: language file line 'Add ILS====' missing right side translation. ERROR: language file line 'Add Fix====' missing right side translation. ERROR: language file line 'Add Outer Marker====' missing right side translation. ERROR: language file line 'Add Middle Marker====' missing right side translation. ERROR: language file line 'Add Inner Marker====' missing right side translation. ERROR: language file line 'Heading====' missing right side translation. ERROR: language file line 'knots true====' missing right side translation. ERROR: language file line 'Climb angle====' missing right side translation. ERROR: language file line 'degrees====' missing right side translation. ERROR: language file line 'Relative Location====' missing right side translation. ERROR: language file line 'Radial====' missing right side translation. ERROR: language file line 'Distance====' missing right side translation. ERROR: language file line 'Latitude:====' missing right side translation. ERROR: language file line 'Longitude:====' missing right side translation. ERROR: language file line 'Move====' missing right side translation. ERROR: language file line 'Final Approach====' missing right side translation. ERROR: language file line 'Details====' missing right side translation. ERROR: language file line 'MEAN SEA LEVEL====' missing right side translation. ERROR: language file line 'Communications====' missing right side translation. ERROR: language file line 'Conditions====' missing right side translation. ERROR: language file line 'Name:====' missing right side translation. ERROR: language file line 'Identifier:====' missing right side translation. ERROR: language file line 'Frequency:====' missing right side translation. ERROR: language file line 'Elevation:====' missing right side translation. ERROR: language file line 'DME Offset:====' missing right side translation. ERROR: language file line 'nm====' missing right side translation. ERROR: language file line 'Heading:====' missing right side translation. ERROR: language file line 'deg magnetic====' missing right side translation. ERROR: language file line 'Range:====' missing right side translation. ERROR: language file line 'Glideslope:====' missing right side translation. ERROR: language file line 'Tune NAV1====' missing right side translation. ERROR: language file line 'Tune NAV2====' missing right side translation. ERROR: language file line 'ILS Approach====' missing right side translation. ERROR: language file line 'LOC Approach====' missing right side translation. ERROR: language file line 'Change Aircraft====' missing right side translation. ERROR: language file line 'Change Weather====' missing right side translation. ERROR: language file line 'Apply====' missing right side translation. ERROR: language file line 'Apply Changes====' missing right side translation. ERROR: language file line 'No failed systems.====' missing right side translation. ERROR: language file line 'Failed Systems====' missing right side translation. ERROR: language file line 'Reset Weight & Balance====' missing right side translation. ERROR: language file line 'Load Selected Flight====' missing right side translation. ERROR: language file line 'Current time====' missing right side translation. ERROR: language file line 'FAILURES====' missing right side translation. ERROR: language file line 'Load Flight====' missing right side translation. ERROR: language file line 'Save Flight====' missing right side translation. ERROR: language file line '<====' missing right side translation. ERROR: language file line '>====' missing right side translation. ERROR: language file line 'Load New Checklist====' missing right side translation. ERROR: language file line 'End of file.====' missing right side translation. ERROR: language file line 'No file loaded.====' missing right side translation. ERROR: language file line 'Open Checklist====' missing right side translation. ERROR: language file line '[End of file]====' missing right side translation. ERROR: language file line 'Hide Checklist====' missing right side translation. ERROR: language file line 'Standard gravitational parameter (mu)====' missing right side translation. ERROR: language file line 'x 10^14====' missing right side translation. ERROR: language file line 'Planet radius====' missing right side translation. ERROR: language file line 'kilometers====' missing right side translation. ERROR: language file line 'Derived gravitational force (G)====' missing right side translation. ERROR: language file line 'meters per second squared====' missing right side translation. ERROR: language file line 'Reset Environment Proprties====' missing right side translation. ERROR: language file line 'Date====' missing right side translation. ERROR: language file line 'Tail Number====' missing right side translation. ERROR: language file line 'Departure====' missing right side translation. ERROR: language file line 'Arrival====' missing right side translation. ERROR: language file line 'Landings====' missing right side translation. ERROR: language file line 'Total Hours====' missing right side translation. ERROR: language file line 'Night Hours====' missing right side translation. ERROR: language file line 'Instrument Hours====' missing right side translation. ERROR: language file line 'Cross Country Hours====' missing right side translation. ERROR: language file line 'Total:====' missing right side translation. ERROR: language file line 'Open Logbook====' missing right side translation. ERROR: language file line 'New Logbook====' missing right side translation. ERROR: language file line 'Load New File====' missing right side translation. ERROR: language file line 'Open Text File====' missing right side translation. ERROR: language file line 'VIDEO RECORDING OPTIONS====' missing right side translation. ERROR: language file line 'Frame rate of video====' missing right side translation. ERROR: language file line 'frames per second====' missing right side translation. ERROR: language file line 'Width of video====' missing right side translation. ERROR: language file line 'pixels====' missing right side translation. ERROR: language file line 'Video quality====' missing right side translation. ERROR: language file line 'Capture video in background====' missing right side translation. ERROR: language file line 'This lets you run at a higher framerate when capturing videos, but results in an upside-down movie on some computers.====' missing right side translation. ERROR: language file line 'Create time lapse video====' missing right side translation. ERROR: language file line 'Time multiplier====' missing right side translation. ERROR: language file line 'ratio====' missing right side translation. ERROR: language file line 'Low====' missing right side translation. ERROR: language file line 'High====' missing right side translation. ERROR: language file line 'REPORT CARD====' missing right side translation. ERROR: language file line 'Retry====' missing right side translation. ERROR: language file line 'End Training====' missing right side translation. ERROR: language file line 'Please enter your X-Plane 11 digital download product key to unlock the full version of X-Plane.====' missing right side translation. ERROR: language file line 'Contacting authorization server...====' missing right side translation. ERROR: language file line 'If you believe this to be an error, click Try Again below, or contact X-Plane customer support at info@x-plane.com.====' missing right side translation. ERROR: language file line 'I Don’t Have a Product Key====' missing right side translation. ERROR: language file line 'Use Demo====' missing right side translation. ERROR: language file line 'UNLOCK X-PLANE====' missing right side translation. ERROR: language file line 'COMPLETE YOUR INSTALLATION====' missing right side translation. ERROR: language file line 'ABOUT THE X-PLANE DEMO====' missing right side translation. ERROR: language file line 'FULL VERSION UNLOCKED====' missing right side translation. ERROR: language file line 'I Have an X-Plane 11 DVD====' missing right side translation. ERROR: language file line 'I Have a Digital Download Product Key====' missing right side translation. ERROR: language file line 'Please insert your X-Plane 11 Disc 1 DVD now to unlock the full version of X-Plane.====' missing right side translation. ERROR: language file line 'I Don‘t Have an X-Plane 11 DVD====' missing right side translation. ERROR: language file line 'Or, insert an X-Plane 11 Disc 1 DVD now to unlock the full version of X-Plane.====' missing right side translation. ERROR: language file line 'Authorization successful.====' missing right side translation. ERROR: language file line 'OK====' missing right side translation. ERROR: language file line 'MISSING SCENERY====' missing right side translation. ERROR: language file line 'Install Missing Scenery====' missing right side translation. ERROR: language file line 'This region has missing scenery!====' missing right side translation. ERROR: language file line 'Areas with no scenery will have nothing but water around them.====' missing right side translation. ERROR: language file line 'You can download the missing scenery for free through Steam.====' missing right side translation. ERROR: language file line 'Right click on X-Plane in your Steam library. Then go to Properties > DLC and select the continent from the list.====' missing right side translation. ERROR: language file line 'Email support@aerosoft.com if you need help.====' missing right side translation. ERROR: language file line 'Would you like to install the missing scenery now?====' missing right side translation. ERROR: language file line 'You can use the X-Plane installer to add missing scenery at any time.====' missing right side translation. ERROR: language file line 'The full version of X-Plane includes scenery for the full world between 74 degrees north and 60 degree south latitudes.====' missing right side translation. ERROR: language file line 'Continue with Water Only====' missing right side translation. ERROR: language file line 'DOWNLOADING UPDATE====' missing right side translation. ERROR: language file line 'CHECKING FOR UPDATES====' missing right side translation. ERROR: language file line 'UPDATE AVAILABLE====' missing right side translation. ERROR: language file line 'UPDATE X-PLANE NOW====' missing right side translation. ERROR: language file line 'UPDATE FAILED====' missing right side translation. ERROR: language file line 'Checking the web for the latest version of X-Plane...====' missing right side translation. ERROR: language file line 'An X-Plane update is available!====' missing right side translation. ERROR: language file line 'Updates include new features, improvements to existing features, and bug fixes. We encourage all users to update in order to get the most complete, powerful simulator available.====' missing right side translation. ERROR: language file line 'If you choose not to update now, you can always do so later from the Settings > General > About X-Plane screen.====' missing right side translation. ERROR: language file line 'The installer has finished downloading.====' missing right side translation. ERROR: language file line 'When you click “Update X-Plane Now,” X-Plane will launch the installer and update to the latest version.====' missing right side translation. ERROR: language file line 'There was an error downloading the installer.====' missing right side translation. ERROR: language file line 'X-Plane is up to date; you already have the latest version of the simulator.====' missing right side translation. ERROR: language file line 'Update to the Latest Beta====' missing right side translation. ERROR: language file line 'Update X-Plane Now====' missing right side translation. ERROR: language file line 'Ignore====' missing right side translation. ERROR: language file line 'ADD OR REMOVE SCENERY====' missing right side translation. ERROR: language file line 'DOWNLOADING INSTALLER====' missing right side translation. ERROR: language file line 'ADD OR REMOVE SCENERY NOW====' missing right side translation. ERROR: language file line 'FAILED TO DOWNLOAD INSTALLER====' missing right side translation. ERROR: language file line 'Checking the web for the latest X-Plane installer...====' missing right side translation. ERROR: language file line 'Would you like to add or remove scenery now?====' missing right side translation. ERROR: language file line 'X-Plane can automatically download the latest installer from the web and run it for you so that you can change your scenery installation.====' missing right side translation. ERROR: language file line 'When you click “Add or Remove Scenery Now,” X-Plane will launch the installer and allow you to change your scenery installation.====' missing right side translation. ERROR: language file line 'Add or Remove Scenery Now====' missing right side translation. ERROR: language file line 'Dismiss====' missing right side translation. ERROR: language file line 'Your X-Plane installation appears to be incomplete (perhaps because you previously installed the demo, then later purchased the full version).====' missing right side translation. ERROR: language file line 'Would you like to complete your installation now?====' missing right side translation. ERROR: language file line 'X-Plane can automatically download the latest installer from the web and run it so that you can complete the installation.====' missing right side translation. ERROR: language file line 'When you click “Complete Installation Now,” X-Plane will launch the installer and begin installing your missing files.====' missing right side translation. ERROR: language file line 'Complete Installation Now====' missing right side translation. ERROR: language file line 'This selection is used to send arbitrary data items (selected in the Data Output tab of this window) to another machine on your local network.====' missing right side translation. ERROR: language file line 'Send data output to another machine on the network====' missing right side translation. ERROR: language file line 'This selection is used to send forward-looking infrared (FLIR) imagery, used by various other apps, to another machine on your local network.====' missing right side translation. ERROR: language file line 'Send FLIR imagery to another machine on the network====' missing right side translation. ERROR: language file line 'Use this section to set other simulators on your local network to act as this machine’s external visuals. Those other computers will then act as extensions of this machine’s displays.====' missing right side translation. ERROR: language file line 'Each external visual can either have its view locked to this machine’s (useful for linking together many computers to show the scenery), or its view can be independent of this machine (useful if you want to have one machine always display your instrument panel, for instance, even when your master machine is in an external view).====' missing right side translation. ERROR: language file line 'MACHINES WHOSE VIEW IS LOCKED TO OURS====' missing right side translation. ERROR: language file line 'Add External Visuals Machine (Locked View)====' missing right side translation. ERROR: language file line 'MACHINES WHOSE VIEW IS INDEPENDENT FROM OURS====' missing right side translation. ERROR: language file line 'Add External Visuals Machine (Independent View)====' missing right side translation. ERROR: language file line 'Transmissions per second====' missing right side translation. ERROR: language file line 'Use this section to set another simulator on your local network to act as this machine’s master simulator, so that this machine will act as an extension of the master simulator’s displays.====' missing right side translation. ERROR: language file line 'You can configure this machine’s view relative to the master using the Graphics tab above.====' missing right side translation. ERROR: language file line 'If you want a suffix to always be added to the end of the aircraft folders we open on this computer, check this box and enter the suffix below. This is useful if you have two aircraft models, one with the pilot-side cockpit and the other with the copilot-side cockpit, with “Aircraft Folder\\My Aircraft.acf” on the master computer, and “Aircraft Folder-copilot\\My Aircraft.acf” on an external cockpit, for example. In that case, you would enter “-copilot” as the suffix (on the external cockpit computer only).====' missing right side translation. ERROR: language file line 'Use aircraft from suffixed folder====' missing right side translation. ERROR: language file line 'Aircraft folder suffix====' missing right side translation. ERROR: language file line 'IP Address====' missing right side translation. ERROR: language file line 'Port====' missing right side translation. ERROR: language file line 'Custom====' missing right side translation. ERROR: language file line 'Use this section to configure an IOS on your local network to control this machine.====' missing right side translation. ERROR: language file line 'Allow a networked IOS to control this machine====' missing right side translation. ERROR: language file line 'Use this section to make this machine an IOS for another copy of X-Plane on your local network.====' missing right side translation. ERROR: language file line 'Add Simulator to Control====' missing right side translation. ERROR: language file line 'XAVION OR FLYQ====' missing right side translation. ERROR: language file line 'Xavion and FlyQ can receive AHRS and ADS-B positional data from X-Plane, allowing you to use those apps with your simulator as though you were sitting in a real cockpit.====' missing right side translation. ERROR: language file line 'Add Connection to Xavion or FlyQ====' missing right side translation. ERROR: language file line 'FOREFLIGHT, WINGX PRO, OR SKYDEMON====' missing right side translation. ERROR: language file line 'These apps can receive AHRS data from X-Plane, allowing you to use those apps with your simulator as though you were sitting in a real cockpit.====' missing right side translation. ERROR: language file line 'Broadcast to all copies of ForeFlight, WingX Pro, and SkyDemon on the network====' missing right side translation. ERROR: language file line 'Transmit to a single copy of ForeFlight, WingX Pro, and SkyDemon on the network====' missing right side translation. ERROR: language file line 'X-PLANE CONTROL PAD====' missing right side translation. ERROR: language file line 'X-Plane Control Pad is a free iPhone & iPad app from the creators of X-Plane which serves as a professional-level Instructor Operating Station controlling your desktop copy of X-Plane.====' missing right side translation. ERROR: language file line 'Use Control Pad as an IOS====' missing right side translation. ERROR: language file line 'LEGACY APPS====' missing right side translation. ERROR: language file line 'X-PLANE REMOTE====' missing right side translation. ERROR: language file line 'Use this section to configure a copy of the (discontinued) X-Plane Remote app, allowing it to act as a joystick for this simulator.====' missing right side translation. ERROR: language file line 'Use X-Plane Remote as a joystick====' missing right side translation. ERROR: language file line 'EFIS APP====' missing right side translation. ERROR: language file line 'Use this section to configure a copy of the (discontinued) EFIS App, allowing it to act as a flight display for this simulator.====' missing right side translation. ERROR: language file line 'Add Connection to EFIS App====' missing right side translation. ERROR: language file line 'Add other simulators on your local network here to fly together. You can race, fly in formation, and more in this mode.====' missing right side translation. ERROR: language file line 'Add Multiplayer Machine====' missing right side translation. ERROR: language file line 'Port we receive on====' missing right side translation. ERROR: language file line 'Port we send from====' missing right side translation. ERROR: language file line 'Port we send to iPhone & iPad devices from====' missing right side translation. ERROR: language file line 'Reset UDP Ports====' missing right side translation. ERROR: language file line 'All====' missing right side translation. ERROR: language file line 'Essentials====' missing right side translation. ERROR: language file line 'Currently Assigned====' missing right side translation. ERROR: language file line 'Plugin Provided====' missing right side translation. ERROR: language file line 'Operation====' missing right side translation. ERROR: language file line 'Nav Radios====' missing right side translation. ERROR: language file line 'Annunciators====' missing right side translation. ERROR: language file line 'Checklists====' missing right side translation. ERROR: language file line 'Views====' missing right side translation. ERROR: language file line 'Select a category of commands to browse on the left, or use the search box to search all commands.====' missing right side translation. ERROR: language file line 'No commands found.====' missing right side translation. ERROR: language file line 'Your search did not match any commands. Try a different search term, or click a category to the left to browse commands instead.====' missing right side translation. ERROR: language file line 'CONFLICTING KEY ASSIGNMENT====' missing right side translation. ERROR: language file line 'CONFLICTING BUTTON ASSIGNMENT====' missing right side translation. ERROR: language file line 'Button %d is already bound to the command \"%s\"\n\nPress OK to remove this old binding and assign Button %d to \"%s\"====' missing right side translation. ERROR: language file line 'CONFLICTING HAT SWITCH ASSIGNMENT====' missing right side translation. ERROR: language file line 'Flight Reset====' missing right side translation. ERROR: language file line 'Developer====' missing right side translation. ERROR: language file line 'Basics====' missing right side translation. ERROR: language file line 'Starters====' missing right side translation. ERROR: language file line 'Throttle====' missing right side translation. ERROR: language file line 'Beta====' missing right side translation. ERROR: language file line 'Thrust Reverse====' missing right side translation. ERROR: language file line 'Propeller====' missing right side translation. ERROR: language file line 'Mixture====' missing right side translation. ERROR: language file line 'Magnetos====' missing right side translation. ERROR: language file line 'Igniter====' missing right side translation. ERROR: language file line 'Cowl Flaps====' missing right side translation. ERROR: language file line 'Shut Down====' missing right side translation. ERROR: language file line 'Fire Extinguisher====' missing right side translation. ERROR: language file line 'Generator====' missing right side translation. ERROR: language file line 'Alternate Air====' missing right side translation. ERROR: language file line 'Trim====' missing right side translation. ERROR: language file line 'Lights====' missing right side translation. ERROR: language file line 'Avionics====' missing right side translation. ERROR: language file line 'Pressurization====' missing right side translation. ERROR: language file line 'De-Ice====' missing right side translation. ERROR: language file line 'Other Systems====' missing right side translation. ERROR: language file line 'Deployment====' missing right side translation. ERROR: language file line 'Doors====' missing right side translation. ERROR: language file line 'Glider====' missing right side translation. ERROR: language file line 'Miscellaneous====' missing right side translation. ERROR: language file line 'Navigation & Radios====' missing right side translation. ERROR: language file line 'NAV Radios====' missing right side translation. ERROR: language file line 'Power====' missing right side translation. ERROR: language file line 'RMI====' missing right side translation. ERROR: language file line 'COM Radios====' missing right side translation. ERROR: language file line 'ADF====' missing right side translation. ERROR: language file line 'Transponder====' missing right side translation. ERROR: language file line 'Audio Panel====' missing right side translation. ERROR: language file line 'ECAM====' missing right side translation. ERROR: language file line 'OBS, HSI, & ADF Card====' missing right side translation. ERROR: language file line 'Indicators====' missing right side translation. ERROR: language file line 'GPS====' missing right side translation. ERROR: language file line 'Change View Mode====' missing right side translation. ERROR: language file line 'Manipulate View====' missing right side translation. ERROR: language file line 'Quick Look====' missing right side translation. ERROR: language file line 'Flight Visualization====' missing right side translation. ERROR: language file line 'View Tools====' missing right side translation. ERROR: language file line 'Checklist====' missing right side translation. ERROR: language file line 'Record button press====' missing right side translation. ERROR: language file line 'Record keystroke(s)====' missing right side translation. ERROR: language file line 'Dataref====' missing right side translation. ERROR: language file line 'Read This Dataref====' missing right side translation. ERROR: language file line 'Write This Dataref====' missing right side translation. ERROR: language file line 'No datarefs found.====' missing right side translation. ERROR: language file line 'Reading====' missing right side translation. ERROR: language file line 'Writing====' missing right side translation. ERROR: language file line 'DATA SOURCES====' missing right side translation. ERROR: language file line 'Send data to (and receive data from):====' missing right side translation. ERROR: language file line 'Networked computer====' missing right side translation. ERROR: language file line 'A COM port====' missing right side translation. ERROR: language file line 'COM port to use:====' missing right side translation. ERROR: language file line 'Baud rate:====' missing right side translation. ERROR: language file line 'bits per second====' missing right side translation. ERROR: language file line 'Datarefs will be written and read as $ + comma-separated strings.====' missing right side translation. ERROR: language file line 'Skip Axis====' missing right side translation. ERROR: language file line 'Skipped====' missing right side translation. ERROR: language file line 'No metrics found.====' missing right side translation. ERROR: language file line 'Your search did not match any outputtable simulation metrics. Try a different search term, or clear your search to browse all available metrics.====' missing right side translation. ERROR: language file line 'Enable groups:====' missing right side translation. ERROR: language file line 'In Cockpit During Flight====' missing right side translation. ERROR: language file line 'Uncheck this to disable all data output on the screen during flight.====' missing right side translation. ERROR: language file line 'Data Graph Window====' missing right side translation. ERROR: language file line 'Uncheck this to disable all data output to the data graph window.====' missing right side translation. ERROR: language file line 'Network via UDP====' missing right side translation. ERROR: language file line 'Uncheck this to disable all data output over the network via UDP.====' missing right side translation. ERROR: language file line 'Disk (data.txt)====' missing right side translation. ERROR: language file line 'Uncheck this to disable all data output to the data.txt file.====' missing right side translation. ERROR: language file line 'UDP Rate====' missing right side translation. ERROR: language file line 'packets/sec====' missing right side translation. ERROR: language file line 'Disk Rate====' missing right side translation. ERROR: language file line 'writes/sec====' missing right side translation. ERROR: language file line 'Rotors flight model (detailed, in-cockpit only)====' missing right side translation. ERROR: language file line 'Propellers flight model (detailed, in-cockpit only)====' missing right side translation. ERROR: language file line 'Wings flight model (detailed, in-cockpit only)====' missing right side translation. ERROR: language file line 'Stabilizers & other control surfaces flight model (detailed, in-cockpit only)====' missing right side translation. ERROR: language file line 'Index====' missing right side translation. ERROR: language file line 'Data to Output====' missing right side translation. ERROR: language file line 'Disk (data.txt File)====' missing right side translation. ERROR: language file line 'Show in Cockpit====' missing right side translation. ERROR: language file line 'Use same scale for all data====' missing right side translation. ERROR: language file line 'Amount of time to show====' missing right side translation. ERROR: language file line 'seconds====' missing right side translation. ERROR: language file line 'Zoom====' missing right side translation. ERROR: language file line 'Start time====' missing right side translation. ERROR: language file line 'Clear All Data Selections====' missing right side translation. ERROR: language file line 'Hat Switch====' missing right side translation. ERROR: language file line 'Next====' missing right side translation. ERROR: language file line 'Leave your controls in their centered position until the timer is up.====' missing right side translation. ERROR: language file line 'CENTER ALL CONTROLS====' missing right side translation. ERROR: language file line 'Done!====' missing right side translation. ERROR: language file line 'Let go of your controls, allowing them to go back to their centered position.====' missing right side translation. ERROR: language file line 'Then, hit the Next button and leave your controls there until the timer is up.====' missing right side translation. ERROR: language file line 'This will let X-Plane determine your controls’ center.====' missing right side translation. ERROR: language file line 'Move each axis of your device through its full range of motion.====' missing right side translation. ERROR: language file line 'UNCALIBRATED JOYSTICK OR YOKE FOUND====' missing right side translation. ERROR: language file line 'Uncalibrated input devices have been found. Would you like to configure them now?====' missing right side translation. ERROR: language file line 'UNCALIBRATED DEVICES FOUND====' missing right side translation. ERROR: language file line 'Open Joystick Calibration====' missing right side translation. ERROR: language file line 'General Data Output====' missing right side translation. ERROR: language file line 'Dataref Read/Write====' missing right side translation. ERROR: language file line 'LANGUAGE====' missing right side translation. ERROR: language file line 'Restart X-Plane to apply changes.====' missing right side translation. ERROR: language file line 'WARNINGS====' missing right side translation. ERROR: language file line 'Give in-cockpit text warnings====' missing right side translation. ERROR: language file line 'If this is on, X-Plane will give you yellow text warnings of any serious non-obvious problems in the upper-right of the screen.====' missing right side translation. ERROR: language file line 'Warn about missing scenery====' missing right side translation. ERROR: language file line 'With this checked, X-Plane will warn you if you try to fly to an area where you have no scenery installed.====' missing right side translation. ERROR: language file line 'Warn about low frame rate====' missing right side translation. ERROR: language file line 'With this checked, X-Plane will warn you if your frame rate gets too low.====' missing right side translation. ERROR: language file line 'Require confirmation of warnings====' missing right side translation. ERROR: language file line 'With this checked, X-Plane will require you to confirmation all warnings (by hitting the Enter key) on external visual machines.====' missing right side translation. ERROR: language file line 'Notify me about new updates to X-Plane====' missing right side translation. ERROR: language file line 'FLIGHT MODEL====' missing right side translation. ERROR: language file line 'Flight Model Precision====' missing right side translation. ERROR: language file line 'Double precision is recommended for most situations, but you may want higher precision if your frame rate is very slow, or you’re flying extremely small, fast, or light aircraft.====' missing right side translation. ERROR: language file line 'Show clickable regions in the cockpit====' missing right side translation. ERROR: language file line 'With this checked, X-Plane will draw a box around areas of the cockpit you can use the mouse to interact with.====' missing right side translation. ERROR: language file line 'Show instrument instructions in the cockpit====' missing right side translation. ERROR: language file line 'With this checked, X-Plane will describe what certain instruments in the cockpit do when you hover over them with the mouse.====' missing right side translation. ERROR: language file line 'Show ATC taxi arrows====' missing right side translation. ERROR: language file line 'With this checked, X-Plane will draw arrows showing where air traffic control has cleared you to taxi.====' missing right side translation. ERROR: language file line 'DATA====' missing right side translation. ERROR: language file line 'Output network data to Log.txt====' missing right side translation. ERROR: language file line 'If this is on, X-Plane will dump its internet I/O to the Log.txt file. This is useful for seeing what data X-Plane is sending and receiving.====' missing right side translation. ERROR: language file line 'Output untranslated strings to “Untranslated Strings.txt”====' missing right side translation. ERROR: language file line 'If this is on, X-Plane will dump any un-translated strings that it finds to Untranslated Strings.txt... You can then copy those to the appropriate resources/text/ file and translate them! (Be sure to go through every window in X-Plane, Plane-Maker, and Airfoil-Maker first to expose all the strings that you might want translated!)====' missing right side translation. ERROR: language file line 'Send anonymous usage data to Laminar Research====' missing right side translation. ERROR: language file line 'This sends anonymous data about how you use X-Plane (which planes you use, where you fly, etc.) to Laminar Research, so we can improve the usability of X-Plane.====' missing right side translation. ERROR: language file line 'Learn more====' missing right side translation. ERROR: language file line 'Click here to learn about our data collection privacy policy.====' missing right side translation. ERROR: language file line 'About X-Plane====' missing right side translation. ERROR: language file line 'DAMAGE====' missing right side translation. ERROR: language file line 'Remove gear doors if you are over Vle====' missing right side translation. ERROR: language file line 'If this is on, X-Plane will remove your landing gear doors if you have the gear down above the maximum gear extension speed (Vle).====' missing right side translation. ERROR: language file line 'Remove flaps if you are over Vfe====' missing right side translation. ERROR: language file line 'If this is on, X-Plane will remove your flaps if you have the flaps down above the maximum flap extension speed (Vfe, the high-end of the white arc on the airspeed indicator.====' missing right side translation. ERROR: language file line 'Reset to the nearest airport when you wreck====' missing right side translation. ERROR: language file line 'If this is on, X-Plane will reset your craft to the nearest airport if you hit the ground hard enough to be considered a fatal accident.====' missing right side translation. ERROR: language file line 'Remove flying surfaces if you are overspeed====' missing right side translation. ERROR: language file line 'If this is on, X-Plane will shed certain flying surfaces if you overspeed your plane.====' missing right side translation. ERROR: language file line 'Remove flying surfaces if your are over G====' missing right side translation. ERROR: language file line 'If this is on, X-Plane will shed certain flying surfaces if you put too much G force on your plane.====' missing right side translation. ERROR: language file line '%dx precision====' missing right side translation. ERROR: language file line 'Number of Objects====' missing right side translation. ERROR: language file line 'Increasing this slider will increase the number of objects drawn in the simulated world. This primarily impacts your CPU usage, so if you have a very powerful CPU, you can set this to High or even Max without impacting your frame rate too much.====' missing right side translation. ERROR: language file line 'Visual Effects====' missing right side translation. ERROR: language file line 'Increasing this slider will increase the quality of the visual effects used in the simulated world. This primarily impacts your graphics card, so if you have a very powerful graphics card, you can set this to High or even Max without impacting your frame rate too much.====' missing right side translation. ERROR: language file line ' (Customized)====' missing right side translation. ERROR: language file line 'Number of World Objects====' missing right side translation. ERROR: language file line 'Increasing this slider will increase the number of objects drawn in the simulated world. This impacts your CPU usage, so if you have a very powerful CPU, you can set this to High or even Max without impacting your frame rate too much.====' missing right side translation. ERROR: language file line 'Number of Airport Objects====' missing right side translation. ERROR: language file line 'Increasing this slider will increase the number of objects drawn at airports. This impacts your CPU usage, so if you have a very powerful CPU, you can set this to High or even Max without impacting your frame rate too much.====' missing right side translation. ERROR: language file line 'Use Vsync====' missing right side translation. ERROR: language file line 'Check this to limit the frame rate of X-Plane to the refresh rate of your monitor. This will stabilize the frame rate (preventing brief drops in frame rate which can be perceived as “stutters”) if you are running X-Plane at a very high frame rate.====' missing right side translation. ERROR: language file line 'Texture Quality====' missing right side translation. ERROR: language file line 'Increasing this slider will increase the texture quality of the cockpit & other objects in the world. If your graphics card has a lot of VRAM, you can increase this without impacting your frame rate (and if you see a sharp dropoff in frame rate, you know you’ve gone too far).====' missing right side translation. ERROR: language file line 'Antialiasing====' missing right side translation. ERROR: language file line 'Antialiasing smooths out jagged edges on objects drawn in the simulator. This impacts your graphics card, so if you have a very powerful graphics card, you can set this to 4x or even higher without impacting your frame rate too much.====' missing right side translation. ERROR: language file line 'RENDERING OPTIONS====' missing right side translation. ERROR: language file line 'MONITOR CONFIGURATION====' missing right side translation. ERROR: language file line 'Show advanced options====' missing right side translation. ERROR: language file line 'STABILITY AUGMENTATION====' missing right side translation. ERROR: language file line 'Pitch====' missing right side translation. ERROR: language file line 'Roll====' missing right side translation. ERROR: language file line 'Yaw====' missing right side translation. ERROR: language file line 'In reality, aircraft controls have near-infinite resolution, high displacement-force, and the plane imparts G on you when you pull back. To help make up for the lack of these things in the sim, you can slide these sliders up a bit to add “auto-control” displacements to stabilize the plane. It isn’t realistic, but may make the plane feel more realistic.====' missing right side translation. ERROR: language file line 'No====' missing right side translation. ERROR: language file line 'Max====' missing right side translation. ERROR: language file line 'CONTROL RESPONSE====' missing right side translation. ERROR: language file line 'These sliders allow you to get more joystick resolution when your controls are near the center of their travel.====' missing right side translation. ERROR: language file line 'Full linear; no enhanced joystick responsiveness====' missing right side translation. ERROR: language file line 'UNCALIBRATED DEVICE====' missing right side translation. ERROR: language file line 'Calibrate Now====' missing right side translation. ERROR: language file line 'AXES====' missing right side translation. ERROR: language file line 'BUTTONS====' missing right side translation. ERROR: language file line 'Device====' missing right side translation. ERROR: language file line 'Calibrate====' missing right side translation. ERROR: language file line 'No flight controls found.====' missing right side translation. ERROR: language file line 'X-Plane could not find any joystick, yoke, pedals, or throttle quadrants.====' missing right side translation. ERROR: language file line 'Make sure to plug in your flight hardware before launching X-Plane, and make sure your operating system recognizes the controls.====' missing right side translation. ERROR: language file line 'DEVICE DISCONNECTED====' missing right side translation. ERROR: language file line 'The device \"%s\" appears to be unplugged. To continue editing its configuration, please reconnect it to your computer.====' missing right side translation. ERROR: language file line 'Stability Augmentation====' missing right side translation. ERROR: language file line 'Control Response====' missing right side translation. ERROR: language file line 'Reset Keyboard Bindings to Default====' missing right side translation. ERROR: language file line 'ALL KEYBOARD CONFIGURATION WILL BE RESET====' missing right side translation. ERROR: language file line 'Clicking “Reset All Keyboard Configuration” below will undo any key bindings you have made and reconfigure X-Plane to use the default keyboard shortcuts.\n\nIf this was not your intention, click Cancel.====' missing right side translation. ERROR: language file line 'Reset All Keyboard Configuration====' missing right side translation. ERROR: language file line 'CONFIGURATION ERROR(S)====' missing right side translation. ERROR: language file line 'The networking system is configured to send data output, but no data was sent. (Perhaps you haven’t selected any items to send over the network in the Data Output tab?)====' missing right side translation. ERROR: language file line 'The networking system is configured to send FLIR imagery, but no data was sent.====' missing right side translation. ERROR: language file line 'SENDING DATA TO====' missing right side translation. ERROR: language file line 'RECEIVING DATA FROM====' missing right side translation. ERROR: language file line 'THIS MACHINE’S IP ADDRESSES====' missing right side translation. ERROR: language file line 'This machine's role====' missing right side translation. ERROR: language file line 'UDP PORTS====' missing right side translation. ERROR: language file line 'MASTER MACHINE====' missing right side translation. ERROR: language file line '(1 connection)====' missing right side translation. ERROR: language file line '(In use)====' missing right side translation. ERROR: language file line 'No incoming data.====' missing right side translation. ERROR: language file line 'No outgoing data.====' missing right side translation. ERROR: language file line 'Failed====' missing right side translation. ERROR: language file line 'Time Since Last Communication====' missing right side translation. ERROR: language file line 'unknown IP====' missing right side translation. ERROR: language file line 'All devices on the network running ForeFlight, WingX Pro, or SkyDemon====' missing right side translation. ERROR: language file line 'Reset Networking Configuration====' missing right side translation. ERROR: language file line 'ALL NETWORKING CONFIGURATION WILL BE RESET====' missing right side translation. ERROR: language file line 'Clicking “Reset All Networking Configuration” below will undo any setup changes you have made and reconfigure this machine to the default networking settings.\n\nIf this was not your intention, click Cancel.====' missing right side translation. ERROR: language file line 'Reset All Networking Configuration====' missing right side translation. ERROR: language file line 'VOLUME====' missing right side translation. ERROR: language file line 'Enable sounds====' missing right side translation. ERROR: language file line 'Propellers====' missing right side translation. ERROR: language file line 'Ground Contact====' missing right side translation. ERROR: language file line 'Warning Systems====' missing right side translation. ERROR: language file line 'COM Radio====' missing right side translation. ERROR: language file line 'Avionics Fan====' missing right side translation. ERROR: language file line 'AIR TRAFFIC CONTROL====' missing right side translation. ERROR: language file line 'Enable text ATC messages====' missing right side translation. ERROR: language file line 'Enable verbal ATC messages====' missing right side translation. ERROR: language file line 'SYSTEM INFORMATION====' missing right side translation. ERROR: language file line 'Speech synthesis for ATIS/AWOS IS installed on this machine.====' missing right side translation. ERROR: language file line 'Speech synthesis for ATIS/AWOS is not installed on this machine.====' missing right side translation. ERROR: language file line 'To install speech synthesis (if you want to hear air traffic control verbally), simply run your Mac OS System Installer, select 'custom install', and install only speech synthesis capabilities.====' missing right side translation. ERROR: language file line 'To install speech synthesis (if you want to hear air traffic control verbally), go to microsoft.com/downloads/ and search for Speech SDK 5.1.====' missing right side translation. ERROR: language file line 'Other Controls====' missing right side translation. ERROR: language file line 'No image available====' missing right side translation. ERROR: language file line 'MAIN MONITOR====' missing right side translation. ERROR: language file line 'Resolution====' missing right side translation. ERROR: language file line '×====' missing right side translation. ERROR: language file line 'VISUALS SETTINGS====' missing right side translation. ERROR: language file line 'Default view====' missing right side translation. ERROR: language file line 'Lock view to default====' missing right side translation. ERROR: language file line 'If this is checked, no view changes will be allowed. You will be unable to get to an external view, or to manipulate your view by looking around.====' missing right side translation. ERROR: language file line 'Allow windshield effects====' missing right side translation. ERROR: language file line 'This enables effects that appear on the windshield, such as rain and bird strikes. You might want to disable this on some installations with projectors.====' missing right side translation. ERROR: language file line 'Reset Visuals Settings====' missing right side translation. ERROR: language file line 'FIELD OF VIEW====' missing right side translation. ERROR: language file line 'Lateral field of view====' missing right side translation. ERROR: language file line 'Use non-proportional vertical field of view====' missing right side translation. ERROR: language file line 'Vertical field of view====' missing right side translation. ERROR: language file line 'Reset FOV====' missing right side translation. ERROR: language file line 'VISUAL OFFSETS====' missing right side translation. ERROR: language file line 'Configure as====' missing right side translation. ERROR: language file line 'Lateral offset====' missing right side translation. ERROR: language file line 'Vertical offset====' missing right side translation. ERROR: language file line 'Use this offset mode for a flat “wall” of monitors.====' missing right side translation. ERROR: language file line 'Each unit slides the screen left/right by half its width. Use -1/+1 for two screens side by side, or -2/0/+2 for three screens in a row.====' missing right side translation. ERROR: language file line 'Roll offset====' missing right side translation. ERROR: language file line 'Use this offset mode for a monitors that are angled around you.====' missing right side translation. ERROR: language file line 'Roll offsets are typically used when using a monitor turned sideways.====' missing right side translation. ERROR: language file line 'FLAT====' missing right side translation. ERROR: language file line 'WRAPAROUND====' missing right side translation. ERROR: language file line 'Unused====' missing right side translation. ERROR: language file line 'Full Screen Simulator====' missing right side translation. ERROR: language file line 'Windowed Simulator====' missing right side translation. ERROR: language file line 'Instructor Operating Station====' missing right side translation. ERROR: language file line 'Forward with scenery====' missing right side translation. ERROR: language file line 'Forward with HUD====' missing right side translation. ERROR: language file line 'Forward with panel====' missing right side translation. ERROR: language file line 'Forward with 3D cockpit====' missing right side translation. ERROR: language file line 'ABOUT X-PLANE====' missing right side translation. ERROR: language file line 'ABOUT THIS COPY OF X-PLANE====' missing right side translation. ERROR: language file line 'FREE UPDATE AVAILABLE====' missing right side translation. ERROR: language file line 'A new update is available for X-Plane.====' missing right side translation. ERROR: language file line 'Update to Latest Beta====' missing right side translation. ERROR: language file line 'DOWNLOADING UPDATE...====' missing right side translation. ERROR: language file line 'READY TO UPDATE====' missing right side translation. ERROR: language file line 'The installer is ready to update!====' missing right side translation. ERROR: language file line 'Update Now====' missing right side translation. ERROR: language file line 'ERROR UPDATING X-PLANE====' missing right side translation. ERROR: language file line 'Your copy of X-Plane is up to date; you have the latest version.====' missing right side translation. ERROR: language file line 'CREDITS====' missing right side translation. ERROR: language file line 'CREATED BY====' missing right side translation. ERROR: language file line 'PROJECT MANAGER====' missing right side translation. ERROR: language file line 'OTHER DEVELOPERS====' missing right side translation. ERROR: language file line 'SCENERY ELEVATION & LAND CLASS====' missing right side translation. ERROR: language file line 'SCENERY TEXTURES & FORESTS====' missing right side translation. ERROR: language file line 'AUTOGEN, ROADS, & URBAN TERRAIN ART====' missing right side translation. ERROR: language file line 'SOURCE PHOTOGRAPHY====' missing right side translation. ERROR: language file line 'RENDERING ART====' missing right side translation. ERROR: language file line 'AIRPLANES & SKY COLORS====' missing right side translation. ERROR: language file line 'AIRPLANES & AIRPORTS====' missing right side translation. ERROR: language file line 'AIRPORT & NAVAID DATA====' missing right side translation. ERROR: language file line 'LINUX PORT====' missing right side translation. ERROR: language file line 'TESTING & DOCUMENTATION====' missing right side translation. ERROR: language file line 'INSTRUMENT APPROACH DATA====' missing right side translation. ERROR: language file line 'LEGAL====' missing right side translation. ERROR: language file line 'X-Plane uses free airspace data from SoaringWeb.com====' missing right side translation. ERROR: language file line 'X-Plane uses FreeType to render fonts. See FreeType.org for more information.====' missing right side translation. ERROR: language file line 'Privacy Policy====' missing right side translation. ERROR: language file line 'Copyright & Licensing====' missing right side translation. ERROR: language file line 'DIFFICULTY====' missing right side translation. ERROR: language file line 'SCORE====' missing right side translation. ERROR: language file line 'General Aviation====' missing right side translation. ERROR: language file line 'Airliners====' missing right side translation. ERROR: language file line 'Navigation====' missing right side translation. ERROR: language file line 'Helicopters====' missing right side translation. ERROR: language file line 'Fighters====' missing right side translation. ERROR: language file line 'Other====' missing right side translation. ERROR: language file line 'Because you changed your aircraft, we will end your current flight and start a new one as you configured it. Is this what you want?====' missing right side translation. ERROR: language file line 'Because you changed your location, we will end your current flight and start a new one as you configured it. Is this what you want?====' missing right side translation. ERROR: language file line 'END CURRENT FLIGHT?====' missing right side translation. ERROR: language file line 'Start New Flight====' missing right side translation. ERROR: language file line 'Discard Changes====' missing right side translation. ERROR: language file line 'Resume Flight====' missing right side translation. ERROR: language file line 'Start Flight====' missing right side translation. ERROR: language file line 'Open Saved Flight Not Listed====' missing right side translation. ERROR: language file line 'Choose a saved flight file to open.====' missing right side translation. ERROR: language file line 'UNKNOWN FILE FORMAT====' missing right side translation. ERROR: language file line 'X-Plane cannot load the file ‘%1:file name%’ because it does not have an extension we recognize. File extensions we recognize for saved flights are: .sit, .fdr, and .rep.====' missing right side translation. ERROR: language file line 'Saved Flight====' missing right side translation. ERROR: language file line 'File Location====' missing right side translation. ERROR: language file line 'Date Saved====' missing right side translation. ERROR: language file line 'No saved flights found.====' missing right side translation. ERROR: language file line 'Select another category of saved flights to browse, or use the search box to search all saved flights.====' missing right side translation. ERROR: language file line 'Your search did not match any saved flights.====' missing right side translation. ERROR: language file line 'Xavion====' missing right side translation. ERROR: language file line 'ABOUT THIS COPY====' missing right side translation. ERROR: language file line 'Learn more at X-Plane.com.====' missing right side translation. ERROR: language file line 'This copy is not approved for commercial applications.====' missing right side translation. ERROR: language file line 'For commercial use, see x-plane.com/pro/.====' missing right side translation. ERROR: language file line 'Report violations to austin@x-plane.com.====' missing right side translation. ERROR: language file line 'DID YOU KNOW...====' missing right side translation. ERROR: language file line 'Quit X-Plane====' missing right side translation. ERROR: language file line 'Load Saved Flight====' missing right side translation. ERROR: language file line 'Flight School====' missing right side translation. ERROR: language file line 'Edit Flight====' missing right side translation. ERROR: language file line 'New Flight====' missing right side translation. ERROR: language file line 'Resume Current Flight====' missing right side translation. ERROR: language file line 'Resume Last Flight====' missing right side translation. ERROR: language file line 'Main Menu====' missing right side translation. ERROR: language file line 'SAVE FLIGHT====' missing right side translation. ERROR: language file line 'Format====' missing right side translation. ERROR: language file line 'File Name====' missing right side translation. ERROR: language file line 'Choose a location to save to.====' missing right side translation. ERROR: language file line 'Graphics====' missing right side translation. ERROR: language file line 'Network====' missing right side translation. ERROR: language file line 'Data Output====' missing right side translation. ERROR: language file line 'Settings====' missing right side translation. ERROR: language file line 'END FLIGHT?====' missing right side translation. ERROR: language file line 'Are you sure you wish to end this flight?====' missing right side translation. ERROR: language file line 'YOU CRASHED!====' missing right side translation. ERROR: language file line 'That had to hurt! Care to try again?====' missing right side translation. ERROR: language file line 'MISSION COMPLETE====' missing right side translation. ERROR: language file line 'You did it! Well done!\n\nWould you like to retry, or quit and try something else?====' missing right side translation. ERROR: language file line 'Pause the simulator====' missing right side translation. ERROR: language file line 'Toggle the ATC window====' missing right side translation. ERROR: language file line 'Toggle the map====' missing right side translation. ERROR: language file line 'Open the Settings window====' missing right side translation. ERROR: language file line 'Open the Flight Configuration window====' missing right side translation. ERROR: language file line 'Get instructions on flying the sim====' missing right side translation. ERROR: language file line 'Get help for the current screen====' missing right side translation. ERROR: language file line 'Open the Settings configuration====' missing right side translation. ERROR: language file line 'X-Plane====' missing right side translation. ERROR: language file line '|-Ground Acceleration Time: Take-Off====' missing right side translation. ERROR: language file line 'airspeed, KCAS====' missing right side translation. ERROR: language file line 'left thrust, lb====' missing right side translation. ERROR: language file line 'right thrust, lb====' missing right side translation. ERROR: language file line 'pressure alt, ft====' missing right side translation. ERROR: language file line 'left brake, ratio====' missing right side translation. ERROR: language file line 'right brake, ratio====' missing right side translation. ERROR: language file line '|-Normal Climb: All Engines Operating====' missing right side translation. ERROR: language file line 'vertical speed, fpm====' missing right side translation. ERROR: language file line 'roll attitude, deg====' missing right side translation. ERROR: language file line '|-Stall Warning: Climb====' missing right side translation. ERROR: language file line 'AOA, deg====' missing right side translation. ERROR: language file line 'stall warning, 0/1====' missing right side translation. ERROR: language file line 'pitch attitude, deg====' missing right side translation. ERROR: language file line 'pitch input, ratio====' missing right side translation. ERROR: language file line '|-Stall Warning: Approach====' missing right side translation. ERROR: language file line '|-Stopping Time: Dry Runway, Landing====' missing right side translation. ERROR: language file line 'heading, deg true====' missing right side translation. ERROR: language file line '|-Engine Acceleration: Approach====' missing right side translation. ERROR: language file line 'left throttle, ratio====' missing right side translation. ERROR: language file line 'left manifold press, in====' missing right side translation. ERROR: language file line 'right throttle, ratio====' missing right side translation. ERROR: language file line 'right manifold press, in====' missing right side translation. ERROR: language file line '|-Engine Deceleration: Take-Off====' missing right side translation. ERROR: language file line 'right manifold pressu, in====' missing right side translation. ERROR: language file line '|-Column Position vs Force====' missing right side translation. ERROR: language file line 'pitch force, lb====' missing right side translation. ERROR: language file line '|-Wheel Position vs Force====' missing right side translation. ERROR: language file line 'roll input, ratio====' missing right side translation. ERROR: language file line 'roll force, lb====' missing right side translation. ERROR: language file line '|-Rudder Position vs Force====' missing right side translation. ERROR: language file line 'left pedal input, ratio====' missing right side translation. ERROR: language file line 'right pedal input, ratio====' missing right side translation. ERROR: language file line 'pedal force, lb====' missing right side translation. ERROR: language file line '|-Rudder Steering Calibration====' missing right side translation. ERROR: language file line 'nw-steer, deg====' missing right side translation. ERROR: language file line '|-Brake Position vs Force====' missing right side translation. ERROR: language file line 'left brake force, lb====' missing right side translation. ERROR: language file line 'right brake force, lb====' missing right side translation. ERROR: language file line '|-Power Change Dynamics: Cruise====' missing right side translation. ERROR: language file line '|-Flap Change Dynamics: Take-Off====' missing right side translation. ERROR: language file line 'flap, ratio====' missing right side translation. ERROR: language file line '|-Flap Change Dynamics: Approach====' missing right side translation. ERROR: language file line '|-Landing Gear Change Dynamics: Take-Off====' missing right side translation. ERROR: language file line 'gear deploy====' missing right side translation. ERROR: language file line '|-Flap Operating Time: Retract====' missing right side translation. ERROR: language file line '|-Flap Operating Time: Extend====' missing right side translation. ERROR: language file line '|-Gear Operating Time: Retract====' missing right side translation. ERROR: language file line 'gear deploy, ratio====' missing right side translation. ERROR: language file line '|-Gear Operating Time: Extend====' missing right side translation. ERROR: language file line 'gear deploy,ratio====' missing right side translation. ERROR: language file line '|-Longitudinal Static Stability: Approach====' missing right side translation. ERROR: language file line '|-Longitudinal Trim: Cruise====' missing right side translation. ERROR: language file line '|-Longitudinal Trim: Approach====' missing right side translation. ERROR: language file line '|-Longitudinal Trim: Landing====' missing right side translation. ERROR: language file line '|-Phugoid Dynamics: Cruise====' missing right side translation. ERROR: language file line 'elevator def, ratio====' missing right side translation. ERROR: language file line '|-Roll Response: Cruise====' missing right side translation. ERROR: language file line 'roll rate, deg/sec====' missing right side translation. ERROR: language file line 'beta, deg====' missing right side translation. ERROR: language file line '|-Roll Response: Landing====' missing right side translation. ERROR: language file line 'left aileron def, ratio====' missing right side translation. ERROR: language file line 'right aileron def, ratio====' missing right side translation. ERROR: language file line 'rudder def, ratio====' missing right side translation. ERROR: language file line '|-Roll Step-Response: Approach====' missing right side translation. ERROR: language file line 'roll atitude, deg====' missing right side translation. ERROR: language file line '|-Spiral Stability: Cruise====' missing right side translation. ERROR: language file line '|-Rudder Response: Landing====' missing right side translation. ERROR: language file line 'left aileronr def, ratio====' missing right side translation. ERROR: language file line 'right aileronr def, ratio====' missing right side translation. ERROR: language file line '|-Dutch Roll: Cruise====' missing right side translation. ERROR: language file line '|-Dutch Roll: Approach====' missing right side translation. ERROR: language file line '|-Steady-State Sideslip: Landing====' missing right side translation. ERROR: language file line '|-Transport Delay====' missing right side translation. ERROR: language file line 'transport delay====' missing right side translation. ERROR: language file line 'Data Output Graph====' missing right side translation. ERROR: language file line 'Text File====' missing right side translation. ERROR: language file line 'Logbook====' missing right side translation. ERROR: language file line 'Map====' missing right side translation. ERROR: language file line 'Instructor Operator Station (IOS)====' missing right side translation. ERROR: language file line 'Nearby Air Traffic Controllers====' missing right side translation. ERROR: language file line 'I will dump all the data for the next cycle of X-Plane to the file 'Cycle Dump.txt'.====' missing right side translation. ERROR: language file line 'This will include all the angles of attack, forces, velocities, etc. for this instant in time.====' missing right side translation. ERROR: language file line 'Quit X-Plane and open the file 'Cycle Dump.txt' with a word processor to read the resultant file.====' missing right side translation. ERROR: language file line 'Be sure to turn off text-wrapping in your word processor or allow very wide text area for the file to look right.====' missing right side translation. ERROR: language file line 'The aircraft must now be in trimmed, level flight. It must be in trimmed, level, un-accelerated flight BEFORE you select this menu-option.====' missing right side translation. ERROR: language file line 'The controls should be centered, with the exception of any trim needed to hold level, un-accelerated flight. The autopilot MAY be on, since it will not have time to affect the test results.====' missing right side translation. ERROR: language file line 'I shall now instantly displace the nose exactly 1 degree, and look at the instantaneous acceleration back to trim of the craft, before the autopilot can respond.====' missing right side translation. ERROR: language file line 'By looking at that acceleration, I will know the stability derivative. I will output my findings to the end of the text file 'Cycle Dump.txt' for you to see.====' missing right side translation. ERROR: language file line 'Loading the introduction to X-Plane.====' missing right side translation. ERROR: language file line 'Would you like to send anonymous usage data to Laminar Research? We use this information to improve X-Plane.====' missing right side translation. ERROR: language file line 'You can change your decision at any time via the Operations and Warnings dialog box.====' missing right side translation. ERROR: language file line '-center of gravity|-(inches from default) { An entry of 0 here, with 0 fuel and 0 ordnance, gives the CG that is listed as the DEFAULT CG in Plane-Maker. Fuel and ordnance load will offset you from the default CG according to their locations on the craft. In ADDITION to that, this entry offsets the entire loaded mass of the aircraft from default, as might be obtained with baggage or passengers.====' missing right side translation. ERROR: language file line '-slung load weight|(lb)====' missing right side translation. ERROR: language file line 'slung-load object| { Choose a slung load object here. It can by any X-Plane OBJ file. If the OBJ file has a weight value in it, then X-Plane will use that weight as the slung load weight. If you change the slung load weight after that, though, then X-Plane will revert back to its default cube slung-load object that scale's its size based on the carried weight.====' missing right side translation. ERROR: language file line 'HTTP Proxy====' missing right side translation. ERROR: language file line 'flight models per frame|2 is OK for most situations, more may be needed for fast, light, or small aircraft or low framerate! { X-Plane runs one or more flight models for each display frame. In every flight model, X-Plane integrates the forces on the airplane to compute new speed and position. The flight model is only accurate when the changes are relatively small, so that the resulting forces can accurately track the changes in the flight situation. One flight model per frame is adequate for a slow handling heavy. But if you're flying a small, quick handling airplane or a supersonic jet, you need a higher rate of flight models to track the airplane's behavior. If you have a low display frame rate because you have a slow computer or you have your scenery options cranked way up, you must run multiple flight models per display frame so the flight model can keep up. If you see rapid oscillation in flight, or the airplane suddenly tumbles out of control at high speed, or it slides or jumps uncontrollably on the ground, the flight model is not keeping up and you need to increase the flight models per frame setting.====' missing right side translation. ERROR: language file line '|-start each flight on ramp { This lets you start each flight on the ramp, as opposed to the runway.====' missing right side translation. ERROR: language file line '|-start each flight cold and dark { This lets you start cold and dark, so you have to do a full start-up.====' missing right side translation. ERROR: language file line '|-discard changes to preferences { This discards any changes to your preferences, NOT saving preferences when you exit X-Plane!====' missing right side translation. ERROR: language file line '|-require warning confirmation { Require a confirmation of warnings (by hitting the enter key) on the external visual machines.====' missing right side translation. ERROR: language file line '|-automatically notify of updates { Automatically notify you of any updates to X-Plane====' missing right side translation. ERROR: language file line '|-show ATC taxi instruction arrows { If this is on, X-Plane will draw arrows showing where ATC has cleared you to taxi.====' missing right side translation. ERROR: language file line '|-dump time data to log.txt { If this is on, X-Plane will dump some time data log.txt. This is useful for seeing for fast X-Plane is running.====' missing right side translation. ERROR: language file line '|-send usage data to Laminar Research { This sends anonymous data about which planes you fly to Laminar Research, so we can improve the usability of X-Plane/====' missing right side translation. ERROR: language file line '|dump un-translated language-file strings to 'Untranslated Strings.txt' { Set X-Plane to a language OTHER THAN ENGLISH. OPEN EACH WINDOW. Open Untranslated Strings.txt. You can then copy strings to resources/text/ file and translate them.====' missing right side translation. ERROR: language file line 'Learn More { Click here to learn about our data collection privacy policy.====' missing right side translation. ERROR: language file line '-proxy host====' missing right side translation. ERROR: language file line '|aircraft that will carry in the PIGGYBACK SHUTTLE option above====' missing right side translation. ERROR: language file line '-your plane team red { ====' missing right side translation. ERROR: language file line '-your plane team blue { ====' missing right side translation. ERROR: language file line '- |team gold { ====' missing right side translation. ERROR: language file line 'This ATC system can take you to any towered airport... even custom ones that you design with World-Editor (available at develoer.x-plane.com)====' missing right side translation. ERROR: language file line 'few====' missing right side translation. ERROR: language file line '|-use Real-Weather and Winds-Aloft { This option will download a real weather file called 'METAR.RWX' from the net that contains actual current weather at thousands of airports across the world. This weather is recorded every hour, and can be used (with the option below) to set the weather in X-Plane to match the real world! As well, X-Plane now gets real winds-aloft!====' missing right side translation. ERROR: language file line 'This is time in seconds from the beginning of the recording.====' missing right side translation. ERROR: language file line 'radio altft====' missing right side translation. ERROR: language file line ' hdng TRUE====' missing right side translation. ERROR: language file line 'Indicated rate-of-turn, degrees per second positive right.====' missing right side translation. ERROR: language file line 'Stall warning, 0 to 1.====' missing right side translation. ERROR: language file line 'Nav-1 type. NONE=0, NDB=2, VOR=3, LOC=5, ILS=10.====' missing right side translation. ERROR: language file line 'Nav-2 type. NONE=0, NDB=2, VOR=3, LOC=5, ILS=10.====' missing right side translation. ERROR: language file line '0.0 means no DME found... any positive value means we are getting DME data.====' missing right side translation. ERROR: language file line ' baro in hg====' missing right side translation. ERROR: language file line 'N1. This is also the % RPM for propeller ====' missing right side translation. ERROR: language file line 'N2.====' missing right side translation. ERROR: language file line ' prop cntrl====' missing right side translation. ERROR: language file line ' prop rpm====' missing right side translation. ERROR: language file line 'Propeller RPM actual, per engine.====' missing right side translation. ERROR: language file line ' prop deg====' missing right side translation. ERROR: language file line 'N1, per engine.====' missing right side translation. ERROR: language file line 'N2, per engine.====' missing right side translation. ERROR: language file line ' MPR inch====' missing right side translation. ERROR: language file line 'Engine Manifold Pressure, per engine.====' missing right side translation. ERROR: language file line ' ITT deg C====' missing right side translation. ERROR: language file line 'Turbine Inlet Temperature, per engine.====' missing right side translation. ERROR: language file line 'Exhaust Gas Temperature, per engine.====' missing right side translation. ERROR: language file line ' CHT deg C====' missing right side translation. ERROR: language file line 'Cylinder Head Temperature, per engine.====' missing right side translation. ERROR: language file line 'Out of range FDR-file longitude!====' missing right side translation. ERROR: language file line 'Out of range FDR-file latitude! ====' missing right side translation. ERROR: language file line ' COMM: any comment====' missing right side translation. ERROR: language file line ' ACFT: the aircraft file to use, with directory path from X-Plane itself, for example: Aircraft/Heavy Metal/Boeing 747.acf====' missing right side translation. ERROR: language file line ' TAIL: the tail number of the aircraft, for example: N8141Q. This line must come AFTER the ACFT line.====' missing right side translation. ERROR: language file line ' TIME: the ZULU time of the beginning of the flight, for example: 18:54:32====' missing right side translation. ERROR: language file line ' DATE: the date of the flight, for example: 03/05/02====' missing right side translation. ERROR: language file line ' PRES: the sea-level pressure during the flight in inches HG, for example: 29.92====' missing right side translation. ERROR: language file line ' TEMP: the sea-level temperature during the flight in degrees F, for example: 65====' missing right side translation. ERROR: language file line ' WIND: the wind during the flight in degrees then knots, for example: 230,17====' missing right side translation. ERROR: language file line ' CALI: the ACTUAL takeoff or touchdown longitude, latitude, and elevation in feet for calibration, for example: -118.34, 34.57, 456. This calibrates to X-Plane scenery.====' missing right side translation. ERROR: language file line ' WARN: warning WAV file, with directory path from X-Plane itself, at a given time, for example: 10,aural_alarm.wav====' missing right side translation. ERROR: language file line ' TEXT: spoken text to be read aloud by the computer at a given time, for example: 10,Copilot left the cockpit here.====' missing right side translation. ERROR: language file line ' MARK: text marker to appear in the time slider at a given time, for example: 10,Approach began here.====' missing right side translation. ERROR: language file line ' EVNT: flight path to be hilighted at a given time for the event duration, for example: 10,5====' missing right side translation. ERROR: language file line ' DATA: a bunch of comma-delimited floating-point numbers, following the labels in the screen below.====' missing right side translation. ERROR: language file line 'Move the mouse over any column to see its description.====' missing right side translation. ERROR: language file line 'center on aircraft====' missing right side translation. ERROR: language file line 'heading { This is the magnetic heading that the aircraft will be placed at if you click on the map.====' missing right side translation. ERROR: language file line '|-track up====' missing right side translation. ERROR: language file line 'show|NEXRAD====' missing right side translation. ERROR: language file line 'show|wind 12K====' missing right side translation. ERROR: language file line 'show|wind 34k====' missing right side translation. ERROR: language file line 'show|airports====' missing right side translation. ERROR: language file line 'show|NAVAIDS====' missing right side translation. ERROR: language file line 'show|airways====' missing right side translation. ERROR: language file line 'show|fixes====' missing right side translation. ERROR: language file line 'show|aircraft====' missing right side translation. ERROR: language file line 'radial: ====Radial:' does not have the same trailing spaces. ERROR: language file line 'distance: ====Entfernung:' does not have the same trailing spaces. ERROR: language file line 'Email Address|(Optional)====' missing right side translation. ERROR: language file line 'Comments|(Optional)====' missing right side translation. ERROR: language file line 'I could not save the file! Could the directory that the file sits in be missing? Or flagged as READ-ONLY by the operating system? (Windows machines typically do this).====' missing right side translation. ERROR: language file line 'Could the file be flagged as read-only? This happens in Windows if you copy it from a CD!====' missing right side translation. ERROR: language file line 'Try putting this app in the background and then flag the file as NOT read-only, or creating the folder listed in the path above.====' missing right side translation. ERROR: language file line 'We were unable to open a zip file. It may be missing or damaged====' missing right side translation. ERROR: language file line 'We were unable to read from a zip file (short-read error). It may be missing or damaged====' missing right side translation. ERROR: language file line 'We were unable to create a zip file====' missing right side translation. ERROR: language file line 'We were unable to write to a zip file. It may be missing or damaged====' missing right side translation. ERROR: language file line 'We cannot compress a zip file because its source file resource fork is more than 2 GB. The source file is probably damaged====' missing right side translation. ERROR: language file line 'We could not open a file to read from it====' missing right side translation. ERROR: language file line 'We were unable to connct to the network due to an internal reconnect error====' missing right side translation. ERROR: language file line 'We wre unable to connect to the network due to a bad state error====' missing right side translation. ERROR: language file line 'We could not allocate a connection to the network====' missing right side translation. ERROR: language file line 'We could not write the incoming file from the web to disk====' missing right side translation. ERROR: language file line 'We could not find the server over the network====' missing right side translation. ERROR: language file line 'Part of the downloaded zip file is corrupted (the resource fork header is bad)====' missing right side translation. ERROR: language file line 'The installed file has corrupt contents.====' missing right side translation. ERROR: language file line '7-Zip data error====' missing right side translation. ERROR: language file line '7-Zip CRC error====' missing right side translation. ERROR: language file line '7-Zip archive error====' missing right side translation. ERROR: language file line '7-Zip is out of memory====' missing right side translation. ERROR: language file line '7-zip unimplemented operation====' missing right side translation. ERROR: language file line '7-zip failure====' missing right side translation. ERROR: language file line '7-zip internal invalid argument====' missing right side translation. ERROR: language file line 'zlib param error====' missing right side translation. ERROR: language file line 'bad zip file====' missing right side translation. ERROR: language file line 'zlib internal error====' missing right side translation. ERROR: language file line 'end of zip archive====' missing right side translation. ERROR: language file line 'zip CRC error====' missing right side translation. ERROR: language file line 'Resource temporarily unavailable====' missing right side translation. ERROR: language file line 'Resource deadlock avoided====' missing right side translation. ERROR: language file line 'File name too long====' missing right side translation. ERROR: language file line 'Function not implemented====' missing right side translation. ERROR: language file line 'Directory not empty====' missing right side translation. ERROR: language file line 'Wide character encoding error====' missing right side translation. ERROR: language file line 'Argument list too long====' missing right side translation. ERROR: language file line 'Permission denied. Perhaps you do not have access to a directory or file system====' missing right side translation. ERROR: language file line 'Bad file descriptor====' missing right side translation. ERROR: language file line 'Device busy====' missing right side translation. ERROR: language file line 'No child processes====' missing right side translation. ERROR: language file line 'Numerical argument out of domain====' missing right side translation. ERROR: language file line 'File exists====' missing right side translation. ERROR: language file line 'Bad address====' missing right side translation. ERROR: language file line 'File too large====' missing right side translation. ERROR: language file line 'File Position Error====' missing right side translation. ERROR: language file line 'Interrupted system call====' missing right side translation. ERROR: language file line 'Invalid argument====' missing right side translation. ERROR: language file line 'Input/output error====' missing right side translation. ERROR: language file line 'Is a directory====' missing right side translation. ERROR: language file line 'Too many open files====' missing right side translation. ERROR: language file line 'Too many links====' missing right side translation. ERROR: language file line 'Too many open files in system====' missing right side translation. ERROR: language file line 'Operation not supported by device====' missing right side translation. ERROR: language file line 'No such file or directory====' missing right side translation. ERROR: language file line 'No error detected====' missing right side translation. ERROR: language file line 'Exec format error====' missing right side translation. ERROR: language file line 'No locks available====' missing right side translation. ERROR: language file line 'Out of memory====' missing right side translation. ERROR: language file line 'No space left on device. Perhaps your hard drive is full====' missing right side translation. ERROR: language file line 'Not a directory====' missing right side translation. ERROR: language file line 'Inappropriate ioctl for device====' missing right side translation. ERROR: language file line 'Device not configured====' missing right side translation. ERROR: language file line 'Operation not permitted. Perhaps you do not have access to a directory or file system====' missing right side translation. ERROR: language file line 'Broken pipe====' missing right side translation. ERROR: language file line 'Result too large====' missing right side translation. ERROR: language file line 'The destination file system is read-only====' missing right side translation. ERROR: language file line 'Signal error====' missing right side translation. ERROR: language file line 'Illegal seek====' missing right side translation. ERROR: language file line 'No such process====' missing right side translation. ERROR: language file line 'Unknown error====' missing right side translation. ERROR: language file line 'Cross-device link====' missing right side translation. ERROR: language file line 'File not found====' missing right side translation. ERROR: language file line 'Queue element not found during deletion.====' missing right side translation. ERROR: language file line 'param err====' missing right side translation. ERROR: language file line 'Directory is full====' missing right side translation. ERROR: language file line 'The disk is full====' missing right side translation. ERROR: language file line 'no such volume====' missing right side translation. ERROR: language file line 'An internal I/O error occurred====' missing right side translation. ERROR: language file line 'bad name====' missing right side translation. ERROR: language file line 'file not open====' missing right side translation. ERROR: language file line 'end of file====' missing right side translation. ERROR: language file line 'position error====' missing right side translation. ERROR: language file line 'Memory is full====' missing right side translation. ERROR: language file line 'Too many files open====' missing right side translation. ERROR: language file line 'A disk is write protected====' missing right side translation. ERROR: language file line 'File locked====' missing right side translation. ERROR: language file line 'Hard disk is locked====' missing right side translation. ERROR: language file line 'A file is in use by another application====' missing right side translation. ERROR: language file line 'duplicate file name====' missing right side translation. ERROR: language file line 'File already open with write permissions by another application====' missing right side translation. ERROR: language file line 'refnum error====' missing right side translation. ERROR: language file line 'get file position error====' missing right side translation. ERROR: language file line 'A needed volume is offline====' missing right side translation. ERROR: language file line 'Permissions error - perhaps you do not have access to a directory====' missing right side translation. ERROR: language file line 'no such drive====' missing right side translation. ERROR: language file line 'Not a macintosh disk====' missing right side translation. ERROR: language file line 'bad master directory block====' missing right side translation. ERROR: language file line 'Write permissions error - perhaps you do not have enough access to a directory====' missing right side translation. ERROR: language file line 'directory not found====' missing right side translation. ERROR: language file line 'Out of memory (memory is full)====' missing right side translation. ERROR: language file line 'You have insufficient privileges for this operation====' missing right side translation. ERROR: language file line 'DONE====' missing right side translation. ERROR: language file line 'DISMISS====' missing right side translation. ERROR: language file line 'Search====' missing right side translation. ERROR: language file line 'Your graphics hardware cannot support X-Plane. X-Plane requires a DX9-class graphics card or newer.====' missing right side translation. ERROR: language file line 'X-Plane does not support the Gallium driver stack.====' missing right side translation. ERROR: language file line 'Loading bitmap ====' missing right side translation. ERROR: language file line 'Frame-rate check passed. Flight-control hardware found.====' missing right side translation. ERROR: language file line 'Flight training approved.====' missing right side translation. ERROR: language file line 'Frame-rate check FAILED!====' missing right side translation. ERROR: language file line 'Do not use this sim for flight training!====' missing right side translation. ERROR: language file line 'Flight-control hardware NOT found!====' missing right side translation. ERROR: language file line '(Remember, you can set up your flight controls by making all the desired selections in the JOYSTICK AND EQUIPMENT screen in the SETTINGS menu and hitting the MEMORIZE THIS CONFIG button).====' missing right side translation. ERROR: language file line 'Frame-rate check FAILED! Flight-control hardware NOT found!====' missing right side translation. ERROR: language file line 'ROLL not found! ====' missing right side translation. ERROR: language file line 'PITCH not found! ====' missing right side translation. ERROR: language file line 'YAW not found! ====' missing right side translation. ERROR: language file line 'BRAKES not found! ====' missing right side translation. ERROR: language file line 'THROTTLES not found! ====' missing right side translation. ERROR: language file line 'PROPS not found! ====' missing right side translation. ERROR: language file line 'MIXTURES not found! ====' missing right side translation. ERROR: language file line 'm====m' missing right side translation. ERROR: language file line 'Instrument Approach Data by Lufthansa Systems, brought to you====' missing right side translation. ERROR: language file line 'with Aerosoft Navdata Pro, available from www.Aerosoft.com====' missing right side translation. ERROR: language file line 'Airspace data from www.SoaringWeb.com====' missing right side translation. ERROR: language file line 'FreeType fonts from www.FreeType.org.====' missing right side translation. ERROR: language file line 'Say Intentions====' missing right side translation. ERROR: language file line 'Don’t Save====' missing right side translation. ERROR: language file line 'This is X-Plane, HOME-USE VERSION, NOT APPROVED FOR COMMERCIAL USE.====' missing right side translation. ERROR: language file line 'Do NOT use this version for commercial applications.====' missing right side translation. ERROR: language file line 'For commercial use, see www.X-Plane.com store.====' missing right side translation. ERROR: language file line 'Report violations to austin@X-Plane.com.====' missing right side translation. ERROR: language file line 'Will init plugins.====' missing right side translation. ERROR: language file line 'Select the key you'd like to program from the list on the left of this screen and hit any key you like! Then select the group and item to assign a funtion to that keypress!====' missing right side translation. ERROR: language file line 'X-Plane crashed on its last flight. Load with DEFAULT rendering options?====' missing right side translation. ERROR: language file line 'Yes====' missing right side translation. ERROR: language file line 'Use the DEFAULT rendering options.====' missing right side translation. ERROR: language file line 'Keep the PREVIOUS rendering options.====' missing right side translation. ERROR: language file line 'Playing back your replay (in slow motion if needed) to create a video recording!====' missing right side translation. ERROR: language file line 'Video is recording, but cannot continuously record at this video size!====' missing right side translation. ERROR: language file line 'Video is recording! This message will NOT be visible in the movie!====' missing right side translation. ERROR: language file line '|capture movie in background { This lets you run at a higher framerate when capturing videos, but results in an upside-down movie on some computers.====' missing right side translation. ERROR: language file line 'Crash Reporter====' missing right side translation. ERROR: language file line 'Update Available====' missing right side translation. ERROR: language file line 'Unlock X-Plane====' missing right side translation. ERROR: language file line 'Missing Scenery====' missing right side translation. ERROR: language file line 'Send Feedback====' missing right side translation. ERROR: language file line 'Author====' missing right side translation. ERROR: language file line 'Video Recording Options====' missing right side translation. ERROR: language file line 'Flight Data Recorder: Xavion====' missing right side translation. ERROR: language file line 'Flight Data Recorder: file====' missing right side translation. ERROR: language file line 'January====' missing right side translation. ERROR: language file line 'February====' missing right side translation. ERROR: language file line 'March====' missing right side translation. ERROR: language file line 'April====' missing right side translation. ERROR: language file line 'May====' missing right side translation. ERROR: language file line 'June====' missing right side translation. ERROR: language file line 'July====' missing right side translation. ERROR: language file line 'August====' missing right side translation. ERROR: language file line 'September====' missing right side translation. ERROR: language file line 'October====' missing right side translation. ERROR: language file line 'November====' missing right side translation. ERROR: language file line 'December====' missing right side translation. ERROR: language file line 'Will read fixes.====' missing right side translation. ERROR: language file line 'Will read airways.====' missing right side translation. ERROR: language file line 'Will read NAVAIDs.====' missing right side translation. ERROR: language file line 'Will read airports.====' missing right side translation. ERROR: language file line 'Enter your flight plan above. Leave \"Departure ICAO\" blank for popup clearances.\n\nFor the route you may enter realistic routes with NDB/VOR/FIXES as well as V/J airways.\n\nSIDS/STARS are not allowed!====' missing right side translation. ERROR: language file line 'Departure ICAO should be blank when filing for a popup clearance.====' missing right side translation. ERROR: language file line 'No Pro-Use Key found! G-430 support will not be allowed!====' missing right side translation. ERROR: language file line 'If you want to run a real G-430 with X-Plane, then you have 2 options to do this:====' missing right side translation. ERROR: language file line '1: Go to www.X-Plane.com and get a key... these keys will unlock the G-430 functionality.====' missing right side translation. ERROR: language file line '2: Go to www.FlyPFC.com. PFC can build you a complete cockpit with yokes, sticks, mounted G-430 radios... everything!====' missing right side translation. ERROR: language file line 'No Pro-Use Key found! G-1000 support will not be allowed!====' missing right side translation. ERROR: language file line 'If you want to run a real G-1000 with X-Plane, then you have 2 options to do this:====' missing right side translation. ERROR: language file line '1: Go to www.X-Plane.com and get a key... these keys will unlock the G-1000 functionality.====' missing right side translation. ERROR: language file line '2: Go to www.FlyPFC.com. PFC can build you a complete cockpit with yokes, sticks, mounted G-1000 radios... everything!====' missing right side translation. ERROR: language file line 'No Projector Key found! A Projector Key is needed to get cylindrical or dome projection options without this alert message!====' missing right side translation. ERROR: language file line 'Dome projection is designed for bigger sims.====' missing right side translation. ERROR: language file line 'Go to www.X-Plane.com and get one Projector Key for each copy of X-Plane on your network... these keys will unlock the dome projection without this alert message!====' missing right side translation. ERROR: language file line 'I could not find the USB key for this custom aircraft!====' missing right side translation. ERROR: language file line 'If you want to fly this plane, you need to insert the USB key that Randy gave you!====' missing right side translation. ERROR: language file line 'Put the key in and re-start X-Plane.====' missing right side translation. ERROR: language file line 'Run Demo====' missing right side translation. ERROR: language file line 'PRESETS====' missing right side translation. ERROR: language file line 'run at this resolution | non-custom will be full-screen { Check this to put X-Plane into full screen mode at the res at right. When X-Plane is in a window, you can drag the lower right corner to resize the window.====' missing right side translation. ERROR: language file line 'lateral offset|(degrees,for wrap-around) { Experiment with these offsets if using multiple computers for wrap-around views, as set up in the internet options screen.====' missing right side translation. ERROR: language file line 'vertical offset|(degrees, for wrap-around) { Experiment with these offsets if using multiple computers for wrap-around views, as set up in the internet options screen.====' missing right side translation. ERROR: language file line 'roll offset for|(degrees, for wrap-around) { You might want to use this if you are running a monitor SIDEWAYS.====' missing right side translation. ERROR: language file line 'lateral offset|(ratio, for monitor-wall) { Each unit slides the screen left/right by half its width. Use -1/+1 for two screens side by side; use -2/0/+2 for three screens in a row.====' missing right side translation. ERROR: language file line 'vertical offset|(ratio, for monitor-wall) { Each unit slides the screen left/right by half its width. Use -1/+1 for two screens side by side; use -2/0/+2 for three screens in a row.====' missing right side translation. ERROR: language file line '|display IOS on second monitor { If this option is on, then X-Plane will display the cockpit on a second monitor, allowing you to run an Instructor Operator Station or anything else you like on the main monitor.====' missing right side translation. ERROR: language file line '|view is locked to default { All view controls are disabled. You have the default forward view whether you like it or not.====' missing right side translation. ERROR: language file line '|windshield effects OFF { This turns off effects that appear on the windshield, such as rain and bird-strikes. This might be desired for some installations with projectors.====' missing right side translation. ERROR: language file line '|forward view scenery only { Use the forward no-HUD view in the default forward view. Useful for simpits with real panels.====' missing right side translation. ERROR: language file line '|forward view with HUD { Display the HUD in the default forward view.====' missing right side translation. ERROR: language file line '|forward view with panel { Display the panel as designed by the aircraft author in the default forward view.====' missing right side translation. ERROR: language file line '|forward view with 3D cockpit { Display the 3D cockpit in the default forward view. Useful only if the aircraft has a 3D cockpit.====' missing right side translation. ERROR: language file line 'Set to minimum====' missing right side translation. ERROR: language file line 'Set to low====' missing right side translation. ERROR: language file line 'Set to medium====' missing right side translation. ERROR: language file line 'Set to high====' missing right side translation. ERROR: language file line 'Set to extreme====' missing right side translation. ERROR: language file line 'The preset you picked requires hardware capabilities that your computer does not have.====' missing right side translation. ERROR: language file line 'Some settings have been lowered to the maximum your computer is capable of.====' missing right side translation. ERROR: language file line 'You should probably try a lower setting for better performance and a smoother flight.====' missing right side translation. ERROR: language file line 'Net data saving to log.txt!====' missing right side translation. ERROR: language file line 'Time data saving to log.txt!====' missing right side translation. ERROR: language file line 'Disk data saving to data.txt!====' missing right side translation. ERROR: language file line 'Tire blown!====' missing right side translation. ERROR: language file line 'Carb ice suspected!====' missing right side translation. ERROR: language file line 'Structure over-G!====' missing right side translation. ERROR: language file line 'Structure over-speed!====' missing right side translation. ERROR: language file line 'Flap over-speed!====' missing right side translation. ERROR: language file line 'Gear over-speed!====' missing right side translation. ERROR: language file line 'Internet output disabled====' missing right side translation. ERROR: language file line 'Disk output disabled====' missing right side translation. ERROR: language file line 'Graphical output disabled====' missing right side translation. ERROR: language file line 'Cockpit output disabled====' missing right side translation. ERROR: language file line 'Internet output not enabled====' missing right side translation. ERROR: language file line '< ANCHOR DEPLOYED! >====' missing right side translation. ERROR: language file line 'You know that real single-engine planes pull to the left, right?====' missing right side translation. ERROR: language file line 'fueled with wrong gas!====' missing right side translation. ERROR: language file line 'explosion====' missing right side translation. ERROR: language file line 'shooting at us====' missing right side translation. ERROR: language file line 'fuel leak!====' missing right side translation. ERROR: language file line 'autopilot aileron servo====' missing right side translation. ERROR: language file line 'autopilot elevator servo====' missing right side translation. ERROR: language file line 'actuator jam====' missing right side translation. ERROR: language file line 'actuator collapse====' missing right side translation. ERROR: language file line 'ice: inlet heat====' missing right side translation. ERROR: language file line 'ice: prop heat====' missing right side translation. ERROR: language file line 'OAT sensor====' missing right side translation. ERROR: language file line 'fuel quantity sensor====' missing right side translation. ERROR: language file line 'nav-1 radio====' missing right side translation. ERROR: language file line 'nav-2 radio====' missing right side translation. ERROR: language file line 'com-1 radio====' missing right side translation. ERROR: language file line 'com-2 radio====' missing right side translation. ERROR: language file line 'nav/com in Garmin 430 #1====' missing right side translation. ERROR: language file line 'nav/com in Garmin 430 #2====' missing right side translation. ERROR: language file line 'GEA====' missing right side translation. ERROR: language file line 'ADC====' missing right side translation. ERROR: language file line 'G1000 airspeed====' missing right side translation. ERROR: language file line 'G1000 altimeter====' missing right side translation. ERROR: language file line 'G1000 magntmtr====' missing right side translation. ERROR: language file line 'G1000 vvi====' missing right side translation. ERROR: language file line 'engine-driven fuel pump====' missing right side translation. ERROR: language file line 'fuel flow restricted====' missing right side translation. ERROR: language file line 'air flow restricted====' missing right side translation. ERROR: language file line 'fuel flow fluctuation====' missing right side translation. ERROR: language file line 'hung start (weak starter)====' missing right side translation. ERROR: language file line 'hung start (clogged nozzles)====' missing right side translation. ERROR: language file line 'hot start (extra fuel)====' missing right side translation. ERROR: language file line 'runaway ITT (low airflow)====' missing right side translation. ERROR: language file line 'reverser-retract====' missing right side translation. ERROR: language file line 'reverser-lock====' missing right side translation. ERROR: language file line 'engine FADEC====' missing right side translation. ERROR: language file line 'oil pump====' missing right side translation. ERROR: language file line 'Fail on command====' missing right side translation. ERROR: language file line 'Allow random failures====' missing right side translation. ERROR: language file line 'Mean time between failure, in hours|This value is a failure probability for each system on the plane, and is IN ADDITION TO the failure probabilities listed in the other failure screens. { This value is the MTBF of each individual component. The overall MTBF of the aircraft is approximately the component MTBF divided by the number of components on the aircraft that can fail.====' missing right side translation. ERROR: language file line 'World====' missing right side translation. ERROR: language file line 'Instruments====' missing right side translation. ERROR: language file line 'Sensor====' missing right side translation. ERROR: language file line 'Primary====' missing right side translation. ERROR: language file line 'Engine====' missing right side translation. ERROR: language file line 'Reverse====' missing right side translation. ERROR: language file line 'Accessory====' missing right side translation. ERROR: language file line '| external visual/cockpit receptions per second====' missing right side translation. ERROR: language file line '| aircraft folder name suffix { If you want a suffix to always be added to the end of the aircraft folder name used for opening on this computer, then enter that suffix here. This is useful if you have a multi-cockpit setup, with 'Cirrus Folder:Cirrus.acf' on the master computer, and 'Cirrus Folder-engines:Cirrus.acf' on an external cockpit, for example. In that case , you would enter '-engines' here on the external cockpit computer only.====' missing right side translation. ERROR: language file line '| external IOS data receptions per second====' missing right side translation. ERROR: language file line 'This computer name:====' missing right side translation. ERROR: language file line 'This computer IP addresses:====' missing right side translation. ERROR: language file line 'a position output machine talking to a master machine====' missing right side translation. ERROR: language file line 'an IOS talking to a master machine====' missing right side translation. ERROR: language file line 'Master====' missing right side translation. ERROR: language file line 'External Visuals====' missing right side translation. ERROR: language file line '1: Get Xavion from the AppStore for your iPad or iPhone.====' missing right side translation. ERROR: language file line '2: Go flying in a REAL airplane, running Xavion in flight.====' missing right side translation. ERROR: language file line '3: Land.====' missing right side translation. ERROR: language file line '4: Get your iPad or iPhone on the same network as this copy of X-Plane, and fire up Xavion on it!====' missing right side translation. ERROR: language file line '5: Check this box and enter the IP address of that iPhone or iPad here.====' missing right side translation. ERROR: language file line '6: Choose one of the flights from the list below! You are seeing Xavions' Flight Data Recorder of YOUR REAL FLIGHTS!====' missing right side translation. ERROR: language file line '7: X-Plane will Then save that FDR file in your X-Plane folder.====' missing right side translation. ERROR: language file line '7: X-Plane has saved "+file_name+" in your X-Plane folder.====' missing right side translation. ERROR: language file line '8: Now select that file in the 'Load Flight Data Recorder File' menu item. (You can rename it to any name you like (that ends in '.FDR') on your desktop.====' missing right side translation. ERROR: language file line '9: Then, see your flight in X-Plane!====' missing right side translation. ERROR: language file line 'Control Pad====' missing right side translation. ERROR: language file line 'pitch====' missing right side translation. ERROR: language file line 'roll====' missing right side translation. ERROR: language file line 'yaw====' missing right side translation. ERROR: language file line 'throttle====' missing right side translation. ERROR: language file line 'collective====' missing right side translation. ERROR: language file line 'left toe brake====' missing right side translation. ERROR: language file line 'right toe brake====' missing right side translation. ERROR: language file line 'prop====' missing right side translation. ERROR: language file line 'mixture====' missing right side translation. ERROR: language file line 'carb heat====' missing right side translation. ERROR: language file line 'thrust vector====' missing right side translation. ERROR: language file line 'wing sweep====' missing right side translation. ERROR: language file line 'speedbrakes====' missing right side translation. ERROR: language file line 'displacement====' missing right side translation. ERROR: language file line 'reverse====' missing right side translation. ERROR: language file line 'elev trim====' missing right side translation. ERROR: language file line 'ailn trim====' missing right side translation. ERROR: language file line 'rudd trim====' missing right side translation. ERROR: language file line 'nosewheel tiller====' missing right side translation. ERROR: language file line 'backup throttle====' missing right side translation. ERROR: language file line 'throttle 1====' missing right side translation. ERROR: language file line 'throttle 2====' missing right side translation. ERROR: language file line 'throttle 3====' missing right side translation. ERROR: language file line 'throttle 4====' missing right side translation. ERROR: language file line 'prop 1====' missing right side translation. ERROR: language file line 'prop 2====' missing right side translation. ERROR: language file line 'prop 3====' missing right side translation. ERROR: language file line 'prop 4====' missing right side translation. ERROR: language file line 'mixture 1====' missing right side translation. ERROR: language file line 'mixture 2====' missing right side translation. ERROR: language file line 'mixture 3====' missing right side translation. ERROR: language file line 'mixture 4====' missing right side translation. ERROR: language file line 'reverse 1====' missing right side translation. ERROR: language file line 'reverse 2====' missing right side translation. ERROR: language file line 'reverse 3====' missing right side translation. ERROR: language file line 'reverse 4====' missing right side translation. ERROR: language file line 'view L/R====' missing right side translation. ERROR: language file line 'view U/D====' missing right side translation. ERROR: language file line 'view zoom====' missing right side translation. ERROR: language file line 'camera L/R====' missing right side translation. ERROR: language file line 'camera U/D====' missing right side translation. ERROR: language file line 'camera zoom====' missing right side translation. ERROR: language file line 'gun/bomb L/R====' missing right side translation. ERROR: language file line 'gun/bomb U/D====' missing right side translation. ERROR: language file line 'Uncalibrated joystick devices have been found. Do you want to calibrate them now?====' missing right side translation. ERROR: language file line 'Please move ALL of your joystick axis through their full range several times.====' missing right side translation. ERROR: language file line 'When you are done, press the button to continue.====' missing right side translation. ERROR: language file line 'Your joystick is now calibrated!====' missing right side translation. ERROR: language file line 'To assign buttons, pick Joystick and Hardware from the Settings menu.====' missing right side translation. ERROR: language file line 'Ok====' missing right side translation. ERROR: language file line 'pitch stability-augmentation, FULL-LEFT FOR MOST REALISM|FULL-RIGHT for most stability-augmentation { In reality, aircraft controls have near-infinite resolution, high displacement-force, and the plane imparts G on you when you pull back. To help make up for the lack of these things in the sim, you can slide these sliders up a bit to add \"auto-control\" displacements to stabilize the plane... it isn't realistic, but may make the plane FEEL more realistic.====' missing right side translation. ERROR: language file line 'roll stability-augmentation, FULL-LEFT FOR MOST REALISM|FULL-RIGHT for most stability-augmentation { In reality, aircraft controls have near-infinite resolution, high displacement-force, and the plane imparts G on you when you pull back. To help make up for the lack of these things in the sim, you can slide these sliders up a bit to add \"auto-control\" displacements to stabilize the plane... it isn't realistic, but may make the plane FEEL more realistic.====' missing right side translation. ERROR: language file line 'yaw stability-augmentation, FULL-LEFT FOR MOST REALISM|FULL-RIGHT for most stability-augmentation { In reality, aircraft controls have near-infinite resolution, high displacement-force, and the plane imparts G on you when you pull back. To help make up for the lack of these things in the sim, you can slide these sliders up a bit to add \"auto-control\" displacements to stabilize the plane... it isn't realistic, but may make the plane FEEL more realistic.====' missing right side translation. ERROR: language file line 'rudder & tiller====' missing right side translation. ERROR: language file line 'lft brake====' missing right side translation. ERROR: language file line 'rgt brake====' missing right side translation. ERROR: language file line 'Track-IR and TrackHat when in 3-D cockpit views | NaturalPoint.com/trackir or Trackhat.org for head-tracking devices that guide your view in X-Plane after you hit ctrl-o. { Indicate here if you have this hardware.====' missing right side translation. ERROR: language file line 'Oculus Rift when in 3-D cockpit views|www.oculusvr.com for a virtual reality glass that shows 3-D view and also tracks your head in the game. { Indicate here if you have this hardware.====' missing right side translation. ERROR: language file line 'I tried to open the following plane, but could not:====' missing right side translation. ERROR: language file line 'This smacks of a corrupted airplane file, or a file that is not REALLY an airplane file, or a missing airplane file altogether!====' missing right side translation. ERROR: language file line 'I will open the default plane now so you can still fly though.====' missing right side translation. ERROR: language file line 'I could not find the default plane:====' missing right side translation. ERROR: language file line 'Be sure that path requested above really is available!====' missing right side translation. ERROR: language file line 'Re-Install X-Plane from the DVD or www.X-Plane.com if needed.====' missing right side translation. ERROR: language file line 'Cycle Flight Model Display====' missing right side translation. ERROR: language file line 'Show Flight Model====' missing right side translation. ERROR: language file line 'Hide Flight Model====' missing right side translation. ERROR: language file line 'Finishing asynchronous loading.====' missing right side translation. ERROR: language file line 'Done with pre-loading.====' missing right side translation. ERROR: language file line 'You can download the missing scenery for FREE through Steam.====' missing right side translation. ERROR: language file line 'Right click on X-Plane in your Steam library. Then go to Properties -> DLC and select the continent from the list.====' missing right side translation. ERROR: language file line 'Minimal====' missing right side translation. ERROR: language file line 'Maximum====' missing right side translation. ERROR: language file line 'Left====' missing right side translation. ERROR: language file line 'Right====' missing right side translation. ERROR: language file line 'Center====' missing right side translation. ERROR: language file line 'Airliner====' missing right side translation. ERROR: language file line 'Experimental====' missing right side translation. ERROR: language file line 'Helicopter====' missing right side translation. ERROR: language file line 'Military====' missing right side translation. ERROR: language file line 'Seaplane====' missing right side translation. ERROR: language file line 'Science Fiction====' missing right side translation. ERROR: language file line 'VTOL====' missing right side translation. ERROR: language file line 'Ultralight====' missing right side translation. ERROR: language file line 'Favorites====' missing right side translation. ERROR: language file line 'Unclassified====' missing right side translation. ERROR: language file line 'Above ====Oberhalb von' does not have the same trailing spaces. ERROR: language file line 'G-units. We will try to give you this G-load by moving the pitch controls ====G-Faktor. Dieser wird durch Bewegung des Höhenruders nachgeahmt' does not have the same trailing spaces. ERROR: language file line 'roll rate|(how fast the aircraft is allowed to roll, degrees/second)====' missing right side translation. ERROR: language file line 'Mild====' missing right side translation. ERROR: language file line 'Moderate====' missing right side translation. ERROR: language file line 'Severe====' missing right side translation. ERROR: language file line 'Heavy====' missing right side translation. ERROR: language file line 'Marginal VFR====' missing right side translation. ERROR: language file line 'Non-Precision Approach====' missing right side translation. ERROR: language file line 'IFR Cat I====' missing right side translation. ERROR: language file line 'IFR Cat II====' missing right side translation. ERROR: language file line 'IFR Cat III====' missing right side translation. ERROR: language file line 'Stormy====' missing right side translation. ERROR: language file line 'clear-cirrus-few cumulus-cumulus sct-cumulus bkn-cumulus ocast-stratus====' missing right side translation. ERROR: language file line 'visibility: ====' missing right side translation. ERROR: language file line 'precip: ====' missing right side translation. ERROR: language file line 'storms: ====' missing right side translation. ERROR: language file line 'turblnc: ====' missing right side translation. ERROR: language file line 'TAT|-(C)====' missing right side translation. ERROR: language file line 'TAT|-(F)====' missing right side translation. ERROR: language file line 'high-altitude wind layer|(MSL) { This is the elevation of the winds aloft above sea level. X-Plane will interpolate smoothly between low and high winds, and will NOT extrapolate.====' missing right side translation. ERROR: language file line 'mid-altitude wind layer|(MSL) { This is the elevation of the winds aloft above sea level. X-Plane will interpolate smoothly between low and high winds, and will NOT extrapolate.====' missing right side translation. ERROR: language file line 'low-altitude wind layer|(MSL) { This is the elevation of the winds aloft above sea level. X-Plane will interpolate smoothly between low and high winds, and will NOT extrapolate.====' missing right side translation. ERROR: language file line 'Set uniform weather if desired, and then drag the mouse across the map to place more clouds and storms! The more you drag, the more inense the weather gets!====' missing right side translation. ERROR: language file line 'Real-Weather download failed. Will try again in ====' missing right side translation. ERROR: language file line '|DOWNLOAD Real-Weather files from the net { This option will download real weather files called 'METAR.rwx' and 'winds.rwx' from the net that contain actual current weather at thousands of airports across the world. This weather is recorded every hour, and can be used (with the option below) to set the weather in X-Plane to match the real world!====' missing right side translation. ERROR: language file line 'Read right now!====' missing right side translation. Initializing off screen memory. Initializing off screen memory complete. I found the following scenery packages (prioritized in this order): 0 Custom Scenery/Aerosoft - EBBR Brussels/ 1 Custom Scenery/Aerosoft - EDDF Frankfurt/ 2 Custom Scenery/Aerosoft - EDLP Paderborn-Lippstadt/ 3 Custom Scenery/Aerosoft - EGBB Birmingham/ 4 Custom Scenery/Aerosoft - EGKK London-Gatwick/ 5 Custom Scenery/Aerosoft - EGLL Heathrow/ 6 Custom Scenery/Aerosoft - EGPF Glasgow/ 7 Custom Scenery/Aerosoft - EGSS London-Stansted/ 8 Custom Scenery/Aerosoft - LEBL Barcelona/ 9 Custom Scenery/Aerosoft - LEMD Madrid/ 10 Custom Scenery/Aerosoft - LFMN Nice Cote d Azur X/ 11 Custom Scenery/Aerosoft - LFPG Paris CDG/ 12 Custom Scenery/Aerosoft - LFPO Paris Orly/ 13 Custom Scenery/Aerosoft - LPFR Faro/ 14 Custom Scenery/Aerosoft - LSGG Genf/ 15 Custom Scenery/Global Airports/ 16 Custom Scenery/KSEA Demo Area/ 17 Custom Scenery/KSEA Demo Terrain/ 18 Custom Scenery/LOWI Demo Area/ 19 Global Scenery/Bug Fixes/ 20 Global Scenery/Extra Islands/ 21 Global Scenery/Recuts 1030/ 22 Global Scenery/X-Plane 10 Global Scenery/ 23 Resources/default scenery/1000 autogen/ 24 Resources/default scenery/1000 decals/ 25 Resources/default scenery/1000 forests/ 26 Resources/default scenery/1000 roads/ 27 Resources/default scenery/1000 urban terrain/ 28 Resources/default scenery/1000 world terrain/ 29 Resources/default scenery/700 roads/ 30 Resources/default scenery/900 beaches/ 31 Resources/default scenery/900 europe objects/ 32 Resources/default scenery/900 forests/ 33 Resources/default scenery/900 roads/ 34 Resources/default scenery/900 us objects/ 35 Resources/default scenery/900 world object placeholders/ 36 Resources/default scenery/airport decals/ 37 Resources/default scenery/airport scenery/ 38 Resources/default scenery/default apt dat/ 39 Resources/default scenery/default atc/ 40 Resources/default scenery/sim objects/ Link to comment Share on other sites More sharing options...
oyan 0 Posted October 20, 2018 Author Share Posted October 20, 2018 Ich habe auch eine Analyse von X Plane 10 von meinem Rechner: Sampling process 8161 for 3 seconds with 1 millisecond of run time between samples Sampling completed, processing symbols... Analysis of sampling X-Plane (pid 8161) every 1 millisecond Process: X-Plane [8161] Path: /Users/CB/X-Plane 10/X-Plane.app/Contents/MacOS/X-Plane Load Address: 0x10000 Identifier: com.laminar_research.X-Plane Version: 10.51r2 (398) Code Type: X86-64 Parent Process: ??? [1] Date/Time: 2018-10-20 20:56:23.389 +0200 Launch Time: 2018-10-20 20:52:30.972 +0200 OS Version: Mac OS X 10.14 (18A391) Report Version: 7 Analysis Tool: /usr/bin/sample Physical footprint: 2.6G Physical footprint (peak): 2.7G ---- Call graph: 636 Thread_1455511 DispatchQueue_1: com.apple.main-thread (serial) + 636 start (in X-Plane) + 52 [0x10051d6b4] + 636 main (in X-Plane) + 103 [0x1005e64e7] + 636 WIN_run_app (in X-Plane) + 43 [0x100db807b] + 484 MACIBM_post_event_proc() (in X-Plane) + 226 [0x100dd8902] + ! 471 APP_update() (in X-Plane) + 1511 [0x1005e3cc7] + ! : 451 WORLD_scene_per_frame(xplane_window*, int, int) (in X-Plane) + 2392 [0x100b59a58] + ! : | 327 WORLD_scene_per_render(rendering_pass, float, float, float, float) (in X-Plane) + 9462 [0x100b56206] + ! : | + 326 OGL_scenery_per_dome_3d_solid(xcam_class*, rendering_pass, int) (in X-Plane) + 9748 [0x1007877b4] + ! : | + ! 326 veh_class::plot_plane_3D(rendering_pass, veh_view_type, int) (in X-Plane) + 1422 [0x10034ba6e] + ! : | + ! 326 veh_class::plot_attached_obj(int, int, int, xcam_class*) (in X-Plane) + 325 [0x10033db95] + ! : | + ! 326 plot_obj(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 333 [0x10025aa8d] + ! : | + ! 326 plot_obj_common(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 8540 [0x10025a1bc] + ! : | + ! 319 glDrawElements_ACC_Exec (in GLEngine) + 412 [0x7fff40057583] + ! : | + ! : 319 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e8d45 [0x7fff30cb4d45] + ! : | + ! : 318 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1ecec4 [0x7fff30bb8ec4] + ! : | + ! : | 318 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x4da50b [0x7fff30ea650b] + ! : | + ! : | 318 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x30538c [0x7fff30cd138c] + ! : | + ! : | 318 gpusSubmitDataBuffers (in libGPUSupportMercury.dylib) + 137 [0x7fff518e4574] + ! : | + ! : | 318 IOAccelContextSubmitDataBuffersExt2 (in IOAccelerator) + 248 [0x7fff53c99c4c] + ! : | + ! : | 318 IOConnectCallStructMethod (in IOKit) + 38 [0x7fff388af54a] + ! : | + ! : | 318 IOConnectCallMethod (in IOKit) + 244 [0x7fff388aed3d] + ! : | + ! : | 318 io_connect_method (in IOKit) + 374 [0x7fff388aeedb] + ! : | + ! : | 318 mach_msg (in libsystem_kernel.dylib) + 60 [0x7fff630b9174] + ! : | + ! : | 318 mach_msg_trap (in libsystem_kernel.dylib) + 10 [0x7fff630b8c2a] + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1ecf36 [0x7fff30bb8f36] + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1eec75 [0x7fff30bbac75] + ! : | + ! 6 glDrawElements_ACC_Exec (in GLEngine) + 246 [0x7fff400574dd] + ! : | + ! : 5 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] + ! : | + ! : | 4 gldUpdateDispatch (in GeForceGLDriver) + 1233 [0x7fff30cd0bea] + ! : | + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x202aec [0x7fff30bceaec] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x675a08 [0x7fff31041a08] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x674d93 [0x7fff31040d93] + ! : | + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2032f8 [0x7fff30bcf2f8] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x676507 [0x7fff31042507] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2007a6 [0x7fff30bcc7a6] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1fc80c [0x7fff30bc880c] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2be1ba [0x7fff30c8a1ba] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2be2f0 [0x7fff30c8a2f0] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x64db46 [0x7fff31019b46] + ! : | + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x203315 [0x7fff30bcf315] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2026f0 [0x7fff30bce6f0] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2197a6 [0x7fff30be57a6] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x218b25 [0x7fff30be4b25] + ! : | + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x203498 [0x7fff30bcf498] + ! : | + ! : | 1 gldUpdateDispatch (in GeForceGLDriver) + 1569 [0x7fff30cd0d3a] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x319812 [0x7fff30ce5812] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1e6dfd [0x7fff30bb2dfd] + ! : | + ! : 1 gleDoDrawDispatchCore (in GLEngine) + 293 [0x7fff40096f28] + ! : | + ! : 1 gleUpdateDeferredStateFull (in GLEngine) + 9559 [0x7fff40095b4c] + ! : | + ! : 1 gleCreateTelemetryData (in GLEngine) + 6 [0x7fff400d99fa] + ! : | + ! 1 OGL_DrawElements(unsigned int, int, unsigned int, void const*) (in X-Plane) + 82 [0x10009b912] + ! : | + ! 1 OGL_sync_std_transform(unsigned int, void*) (in X-Plane) + 456 [0x1006a92c8] + ! : | + 1 OGL_scenery_per_dome_3d_solid(xcam_class*, rendering_pass, int) (in X-Plane) + 5099 [0x10078658b] + ! : | + 1 veh_class::plot_shadow_per_render() (in X-Plane) + 70 [0x100d9a936] + ! : | + 1 yter_class::ret_ter_y_full(float, float, float, int) (in X-Plane) + 85 [0x10031cd35] + ! : | + 1 yter_class::ret_ter_y_full(float, float, float, int, float*, float*, float*) (in X-Plane) + 6739 [0x10031c853] + ! : | 113 WORLD_scene_per_render(rendering_pass, float, float, float, float) (in X-Plane) + 9346 [0x100b56192] + ! : | + 103 OGL_terrain_grid(rendering_pass, int, int, int, int) (in X-Plane) + 2371 [0x100b491b3] + ! : | + ! 61 REN_collector::draw(xcam_class*) (in X-Plane) + 5941 [0x100ebd925] + ! : | + ! : 39 glDrawElementsBaseVertex_ACC_Exec (in GLEngine) + 400 [0x7fff40059a66] + ! : | + ! : | 38 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e8d45 [0x7fff30cb4d45] + ! : | + ! : | + 36 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1ecec4 [0x7fff30bb8ec4] + ! : | + ! : | + ! 36 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x4da50b [0x7fff30ea650b] + ! : | + ! : | + ! 35 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x30538c [0x7fff30cd138c] + ! : | + ! : | + ! : 35 gpusSubmitDataBuffers (in libGPUSupportMercury.dylib) + 137 [0x7fff518e4574] + ! : | + ! : | + ! : 35 IOAccelContextSubmitDataBuffersExt2 (in IOAccelerator) + 248 [0x7fff53c99c4c] + ! : | + ! : | + ! : 35 IOConnectCallStructMethod (in IOKit) + 38 [0x7fff388af54a] + ! : | + ! : | + ! : 35 IOConnectCallMethod (in IOKit) + 244 [0x7fff388aed3d] + ! : | + ! : | + ! : 35 io_connect_method (in IOKit) + 374 [0x7fff388aeedb] + ! : | + ! : | + ! : 35 mach_msg (in libsystem_kernel.dylib) + 60 [0x7fff630b9174] + ! : | + ! : | + ! : 35 mach_msg_trap (in libsystem_kernel.dylib) + 10 [0x7fff630b8c2a] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x3052b5 [0x7fff30cd12b5] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e70a2 [0x7fff30cb30a2] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e71d1 [0x7fff30cb31d1] + ! : | + ! : | + 2 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1ecf36 [0x7fff30bb8f36] + ! : | + ! : | + 2 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1eee04 [0x7fff30bbae04] + ! : | + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e6ca3 [0x7fff30cb2ca3] + ! : | + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e6d3a [0x7fff30cb2d3a] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e8c31 [0x7fff30cb4c31] + ! : | + ! : 21 glDrawElementsBaseVertex_ACC_Exec (in GLEngine) + 238 [0x7fff400599c4] + ! : | + ! : | 18 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] + ! : | + ! : | + 13 gldUpdateDispatch (in GeForceGLDriver) + 1233 [0x7fff30cd0bea] + ! : | + ! : | + ! 5 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2032f8 [0x7fff30bcf2f8] + ! : | + ! : | + ! : 3 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x6764b7 [0x7fff310424b7] + ! : | + ! : | + ! : | 2 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x20796b [0x7fff30bd396b] + ! : | + ! : | + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e6cd0 [0x7fff30cb2cd0] + ! : | + ! : | + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e6e4d [0x7fff30cb2e4d] + ! : | + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2079a7 [0x7fff30bd39a7] + ! : | + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x6744a3 [0x7fff310404a3] + ! : | + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x674403 [0x7fff31040403] + ! : | + ! : | + ! : 2 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x676507 [0x7fff31042507] + ! : | + ! : | + ! : 2 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2007a6 [0x7fff30bcc7a6] + ! : | + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1fc7f4 [0x7fff30bc87f4] + ! : | + ! : | + ! : + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1fc2d2 [0x7fff30bc82d2] + ! : | + ! : | + ! : + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x357227 [0x7fff30d23227] + ! : | + ! : | + ! : + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2cd060 [0x7fff30c99060] + ! : | + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1fc82e [0x7fff30bc882e] + ! : | + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x206f03 [0x7fff30bd2f03] + ! : | + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x206b96 [0x7fff30bd2b96] + ! : | + ! : | + ! 4 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x203315 [0x7fff30bcf315] + ! : | + ! : | + ! : 4 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2026f0 [0x7fff30bce6f0] + ! : | + ! : | + ! : 4 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2197a6 [0x7fff30be57a6] + ! : | + ! : | + ! : 2 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x218eef [0x7fff30be4eef] + ! : | + ! : | + ! : | 2 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1da71a [0x7fff30ba671a] + ! : | + ! : | + ! : | 2 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e6eea [0x7fff30cb2eea] + ! : | + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e7859 [0x7fff30cb3859] + ! : | + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e7988 [0x7fff30cb3988] + ! : | + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x218d7c [0x7fff30be4d7c] + ! : | + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x218336 [0x7fff30be4336] + ! : | + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x4de9f0 [0x7fff30eaa9f0] + ! : | + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x4de62d [0x7fff30eaa62d] + ! : | + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x218b25 [0x7fff30be4b25] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x202b13 [0x7fff30bceb13] + ! : | + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2df7d6 [0x7fff30cab7d6] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2034b5 [0x7fff30bcf4b5] + ! : | + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2079a7 [0x7fff30bd39a7] + ! : | + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x674492 [0x7fff31040492] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x203526 [0x7fff30bcf526] + ! : | + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x21f91f [0x7fff30beb91f] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x202804 [0x7fff30bce804] + ! : | + ! : | + 2 gldUpdateDispatch (in GeForceGLDriver) + 1046 [0x7fff30cd0b2f] + ! : | + ! : | + ! 2 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x31a88f [0x7fff30ce688f] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x30a98d [0x7fff30cd698d] + ! : | + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x31af0d [0x7fff30ce6f0d] + ! : | + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x329195 [0x7fff30cf5195] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x30bc3c [0x7fff30cd7c3c] + ! : | + ! : | + 1 gldUpdateDispatch (in GeForceGLDriver) + 1074 [0x7fff30cd0b4b] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x323257 [0x7fff30cef257] + ! : | + ! : | + 1 gldUpdateDispatch (in GeForceGLDriver) + 1163 [0x7fff30cd0ba4] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x328f20 [0x7fff30cf4f20] + ! : | + ! : | + ! 1 gpusLoadCurrentVertexArray (in libGPUSupportMercury.dylib) + 690 [0x7fff518eaa73] + ! : | + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x328544 [0x7fff30cf4544] + ! : | + ! : | + 1 gldUpdateDispatch (in GeForceGLDriver) + 1193 [0x7fff30cd0bc2] + ! : | + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2c5866 [0x7fff30c91866] + ! : | + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2c5072 [0x7fff30c91072] + ! : | + ! : | 2 gleDoDrawDispatchCore (in GLEngine) + 293 [0x7fff40096f28] + ! : | + ! : | + 1 gleUpdateDeferredStateFull (in GLEngine) + 2638 [0x7fff40094043] + ! : | + ! : | + ! 1 gleUpdateVertexFallbackProgram (in GLEngine) + 1324 [0x7fff4006a4e0] + ! : | + ! : | + ! 1 cvmHashMachineFindObject (in libCVMSPluginSupport.dylib) + 13 [0x7fff3f3caa0e] + ! : | + ! : | + ! 1 cvm_hash_set_find (in libCVMSPluginSupport.dylib) + 0 [0x7fff3f3caa18] + ! : | + ! : | + 1 gleUpdateDeferredStateFull (in GLEngine) + 3862 [0x7fff4009450b] + ! : | + ! : | 1 gleDoDrawDispatchCore (in GLEngine) + 104 [0x7fff40096e6b] + ! : | + ! : | 1 gleUpdateDrawFramebufferState (in GLEngine) + 606 [0x7fff40095dfb] + ! : | + ! : | 1 gldUpdateDrawFramebuffer (in libGPUSupportMercury.dylib) + 166 [0x7fff518e60c1] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e925a [0x7fff30cb525a] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x202b13 [0x7fff30bceb13] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2df759 [0x7fff30cab759] + ! : | + ! : 1 OGL_DrawElementsBaseVertex(unsigned int, int, unsigned int, void const*, int) (in X-Plane) + 85 [0x10009b885] + ! : | + ! : 1 OGL_sync_std_transform(unsigned int, void*) (in X-Plane) + 1094 [0x1006a9546] + ! : | + ! : 1 setUniform (in GLEngine) + 187 [0x7fff40028fbb] + ! : | + ! : 1 setProgramUniformInner (in GLEngine) + 3821 [0x7fff4003497d] + ! : | + ! 12 REN_collector::draw(xcam_class*) (in X-Plane) + 1245 [0x100ebc6cd] + ! : | + ! : 10 glDrawElementsBaseVertex_ACC_Exec (in GLEngine) + 400 [0x7fff40059a66] + ! : | + ! : | 10 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e8d45 [0x7fff30cb4d45] + ! : | + ! : | 10 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1ecec4 [0x7fff30bb8ec4] + ! : | + ! : | 10 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x4da50b [0x7fff30ea650b] + ! : | + ! : | 10 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x30538c [0x7fff30cd138c] + ! : | + ! : | 10 gpusSubmitDataBuffers (in libGPUSupportMercury.dylib) + 137 [0x7fff518e4574] + ! : | + ! : | 10 IOAccelContextSubmitDataBuffersExt2 (in IOAccelerator) + 248 [0x7fff53c99c4c] + ! : | + ! : | 10 IOConnectCallStructMethod (in IOKit) + 38 [0x7fff388af54a] + ! : | + ! : | 10 IOConnectCallMethod (in IOKit) + 244 [0x7fff388aed3d] + ! : | + ! : | 10 io_connect_method (in IOKit) + 374 [0x7fff388aeedb] + ! : | + ! : | 10 mach_msg (in libsystem_kernel.dylib) + 60 [0x7fff630b9174] + ! : | + ! : | 10 mach_msg_trap (in libsystem_kernel.dylib) + 10 [0x7fff630b8c2a] + ! : | + ! : 2 glDrawElementsBaseVertex_ACC_Exec (in GLEngine) + 238 [0x7fff400599c4] + ! : | + ! : 1 gleDoDrawDispatchCore (in GLEngine) + 293 [0x7fff40096f28] + ! : | + ! : + 1 gleUpdateDeferredStateFull (in GLEngine) + 8749 [0x7fff40095822] + ! : | + ! : 1 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] + ! : | + ! : 1 gldUpdateDispatch (in GeForceGLDriver) + 1163 [0x7fff30cd0ba4] + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x328f20 [0x7fff30cf4f20] + ! : | + ! : 1 gpusLoadCurrentVertexArray (in libGPUSupportMercury.dylib) + 690 [0x7fff518eaa73] + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x32837a [0x7fff30cf437a] + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2ef1ab [0x7fff30cbb1ab] + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2ef37c [0x7fff30cbb37c] + ! : | + ! 8 REN_collector::draw(xcam_class*) (in X-Plane) + 402 [0x100ebc382] + ! : | + ! : 7 REN_setup_terrain_shading(REN_terrain_shader const*, rendering_pass, int) (in X-Plane) + 276 [0x100cce3b4] + ! : | + ! : | 2 OGL_terrain_shader_setup(OGL_terrain_shader const&) (in X-Plane) + 2867,4040 [0x1001fa593,0x1001faa28] + ! : | + ! : | 1 OGL_terrain_shader_setup(OGL_terrain_shader const&) (in X-Plane) + 544 [0x1001f9c80] + ! : | + ! : | + 1 OGL_shader_conditional::bind(unsigned long long) (in X-Plane) + 190 [0x1000bde6e] + ! : | + ! : | + 1 glUseProgramObjectARB_Exec (in GLEngine) + 217 [0x7fff4000ee6e] + ! : | + ! : | + 1 gleUseProgramObject (in GLEngine) + 400 [0x7fff400b92ec] + ! : | + ! : | + 1 gleUpdateCurrentProgramState (in GLEngine) + 423 [0x7fff400b89cb] + ! : | + ! : | + 1 gleFPChanged (in GLEngine) + 13 [0x7fff3ffc08f6] + ! : | + ! : | 1 OGL_terrain_shader_setup(OGL_terrain_shader const&) (in X-Plane) + 1619 [0x1001fa0b3] + ! : | + ! : | + 1 OGL_shader_conditional::uniform1i(unsigned long long, int, int) (in X-Plane) + 129 [0x1001f74d1] + ! : | + ! : | 1 OGL_terrain_shader_setup(OGL_terrain_shader const&) (in X-Plane) + 6917 [0x1001fb565] + ! : | + ! : | + 1 glUniform4f_Exec (in GLEngine) + 64 [0x7fff400294e0] + ! : | + ! : | + 1 setUniform (in GLEngine) + 187 [0x7fff40028fbb] + ! : | + ! : | + 1 setProgramUniformInner (in GLEngine) + 157 [0x7fff40033b2d] + ! : | + ! : | 1 OGL_terrain_shader_setup(OGL_terrain_shader const&) (in X-Plane) + 8210 [0x1001fba72] + ! : | + ! : | + 1 TEX_obj::bind(int) (in X-Plane) + 218 [0x1000d299a] + ! : | + ! : | + 1 glBindTexture_Exec (in GLEngine) + 407 [0x7fff3ffadd21] + ! : | + ! : | + 1 gleBindTexture (in GLEngine) + 254 [0x7fff3ffade5c] + ! : | + ! : | 1 OGL_terrain_shader_setup(OGL_terrain_shader const&) (in X-Plane) + 11341 [0x1001fc6ad] + ! : | + ! : | 1 TEX_obj::bind(int) (in X-Plane) + 55 [0x1000d28f7] + ! : | + ! : | 1 OSAtomicCompareAndSwap32 (in libsystem_platform.dylib) + 6 [0x7fff631679d2] + ! : | + ! : 1 REN_setup_terrain_shading(REN_terrain_shader const*, rendering_pass, int) (in X-Plane) + 288 [0x100cce3c0] + ! : | + ! 5 REN_collector::draw(xcam_class*) (in X-Plane) + 3382 [0x100ebcf26] + ! : | + ! : 2 draw_obj_cluster(obj_cluster*, float) (in X-Plane) + 2613 [0x1009690f5] + ! : | + ! : | 2 glDrawElementsInstanced_ACC_Exec (in GLEngine) + 268 [0x7fff400593cf] + ! : | + ! : | 2 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] + ! : | + ! : | 1 gldUpdateDispatch (in GeForceGLDriver) + 1163 [0x7fff30cd0ba4] + ! : | + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x328f20 [0x7fff30cf4f20] + ! : | + ! : | + 1 gpusLoadCurrentVertexArray (in libGPUSupportMercury.dylib) + 195 [0x7fff518ea884] + ! : | + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x32811d [0x7fff30cf411d] + ! : | + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x329809 [0x7fff30cf5809] + ! : | + ! : | 1 gldUpdateDispatch (in GeForceGLDriver) + 1233 [0x7fff30cd0bea] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2032f8 [0x7fff30bcf2f8] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x676507 [0x7fff31042507] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2007a6 [0x7fff30bcc7a6] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1fc7f4 [0x7fff30bc87f4] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1fc12d [0x7fff30bc812d] + ! : | + ! : 2 draw_obj_cluster(obj_cluster*, float) (in X-Plane) + 28,40 [0x1009686dc,0x1009686e8] + ! : | + ! : 1 draw_obj_cluster(obj_cluster*, float) (in X-Plane) + 3089 [0x1009692d1] + ! : | + ! : 1 glDrawElements_ACC_Exec (in GLEngine) + 246 [0x7fff400574dd] + ! : | + ! : 1 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] + ! : | + ! : 1 gldUpdateDispatch (in GeForceGLDriver) + 1163 [0x7fff30cd0ba4] + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x328f20 [0x7fff30cf4f20] + ! : | + ! : 1 gpusLoadCurrentVertexArray (in libGPUSupportMercury.dylib) + 509 [0x7fff518ea9be] + ! : | + ! 5 REN_collector::draw(xcam_class*) (in X-Plane) + 4870 [0x100ebd4f6] + ! : | + ! : 2 plot_obj_common(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 7549 [0x100259ddd] + ! : | + ! : | 1 DYLD-STUB$$memcpy (in X-Plane) + 0 [0x101097e52] + ! : | + ! : | 1 OGL_terrain_shader_setup(OGL_terrain_shader const&) (in X-Plane) + 599 [0x1001f9cb7] + ! : | + ! : 2 plot_obj_common(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 8540 [0x10025a1bc] + ! : | + ! : | 2 glDrawElements_ACC_Exec (in GLEngine) + 246 [0x7fff400574dd] + ! : | + ! : | 2 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] + ! : | + ! : | 2 gldUpdateDispatch (in GeForceGLDriver) + 1233 [0x7fff30cd0bea] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x202aec [0x7fff30bceaec] + ! : | + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x6759c9 [0x7fff310419c9] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2032f8 [0x7fff30bcf2f8] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x676507 [0x7fff31042507] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2007a6 [0x7fff30bcc7a6] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1fc7f4 [0x7fff30bc87f4] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1fc2d2 [0x7fff30bc82d2] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x3571dc [0x7fff30d231dc] + ! : | + ! : 1 plot_obj_common(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 7371 [0x100259d2b] + ! : | + ! : 1 OGL_terrain_shader_setup(OGL_terrain_shader const&) (in X-Plane) + 544 [0x1001f9c80] + ! : | + ! : 1 OGL_shader_conditional::bind(unsigned long long) (in X-Plane) + 190 [0x1000bde6e] + ! : | + ! : 1 glUseProgramObjectARB_Exec (in GLEngine) + 217 [0x7fff4000ee6e] + ! : | + ! : 1 gleUseProgramObject (in GLEngine) + 486 [0x7fff400b9342] + ! : | + ! : 1 gleUnbindProgramObject (in GLEngine) + 89 [0x7fff400b93e6] + ! : | + ! : 1 gldUnbindPipelineProgram (in GeForceGLDriver) + 66 [0x7fff30cd66c0] + ! : | + ! 3 REN_collector::draw(xcam_class*) (in X-Plane) + 3335 [0x100ebcef7] + ! : | + ! : 3 draw_obj_cluster(obj_cluster*, float) (in X-Plane) + 2613 [0x1009690f5] + ! : | + ! : 3 glDrawElementsInstanced_ACC_Exec (in GLEngine) + 268 [0x7fff400593cf] + ! : | + ! : 2 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] + ! : | + ! : | 2 gldUpdateDispatch (in GeForceGLDriver) + 1163 [0x7fff30cd0ba4] + ! : | + ! : | 2 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x328f20 [0x7fff30cf4f20] + ! : | + ! : | 2 gpusLoadCurrentVertexArray (in libGPUSupportMercury.dylib) + 509,611 [0x7fff518ea9be,0x7fff518eaa24] + ! : | + ! : 1 gleDoDrawDispatchCore (in GLEngine) + 293 [0x7fff40096f28] + ! : | + ! : 1 gleUpdateDeferredStateFull (in GLEngine) + 2638 [0x7fff40094043] + ! : | + ! : 1 gleUpdateVertexFallbackProgram (in GLEngine) + 1243 [0x7fff4006a48f] + ! : | + ! 2 REN_collector::draw(xcam_class*) (in X-Plane) + 4523 [0x100ebd39b] + ! : | + ! : 1 plot_obj_common(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 6588 [0x100259a1c] + ! : | + ! : | 1 OBJ_point_pool::setup_vbo_tris() (in X-Plane) + 153 [0x10026cb29] + ! : | + ! : | 1 glBindBuffer_Exec (in GLEngine) + 130 [0x7fff3ffd85ec] + ! : | + ! : | 1 gleBindBufferObject (in GLEngine) + 49 [0x7fff4008fe1c] + ! : | + ! : | 1 gleLookupHashObject (in GLEngine) + 26 [0x7fff3ffae138] + ! : | + ! : 1 plot_obj_common(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 7549 [0x100259ddd] + ! : | + ! : 1 OGL_terrain_shader_setup(OGL_terrain_shader const&) (in X-Plane) + 585 [0x1001f9ca9] + ! : | + ! : 1 OGL_set_shader_transforms(OGL_shader_conditional*, unsigned long long, int, int, int, int) (in X-Plane) + 50 [0x1000b97d2] + ! : | + ! : 1 OGL_shader_conditional::get_uniform_loc(unsigned long long, int) const (in X-Plane) + 153 [0x1000b9779] + ! : | + ! 1 REN_collector::draw(xcam_class*) (in X-Plane) + 2932 [0x100ebcd64] + ! : | + ! : 1 glDrawElementsBaseVertex_ACC_Exec (in GLEngine) + 238 [0x7fff400599c4] + ! : | + ! : 1 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] + ! : | + ! : 1 gldUpdateDispatch (in GeForceGLDriver) + 1233 [0x7fff30cd0bea] + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2032f8 [0x7fff30bcf2f8] + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x676530 [0x7fff31042530] + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2010ec [0x7fff30bcd0ec] + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2c59f9 [0x7fff30c919f9] + ! : | + ! 1 REN_collector::draw(xcam_class*) (in X-Plane) + 3090 [0x100ebce02] + ! : | + ! : 1 set_obj_common_state(obj_mod_struct*, float) (in X-Plane) + 303 [0x10025608f] + ! : | + ! : 1 OGL_terrain_shader_setup(OGL_terrain_shader const&) (in X-Plane) + 4797 [0x1001fad1d] + ! : | + ! : 1 glUniform3f_Exec (in GLEngine) + 59 [0x7fff4002931b] + ! : | + ! : 1 setUniform (in GLEngine) + 187 [0x7fff40028fbb] + ! : | + ! : 1 setProgramUniformInner (in GLEngine) + 157 [0x7fff40033b2d] + ! : | + ! 1 REN_collector::draw(xcam_class*) (in X-Plane) + 3553 [0x100ebcfd1] + ! : | + ! : 1 draw_obj_cluster(obj_cluster*, float) (in X-Plane) + 28 [0x1009686dc] + ! : | + ! 1 REN_collector::draw(xcam_class*) (in X-Plane) + 4596 [0x100ebd3e4] + ! : | + ! : 1 plot_obj_common(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 9809 [0x10025a6b1] + ! : | + ! 1 REN_collector::draw(xcam_class*) (in X-Plane) + 5910 [0x100ebd906] + ! : | + ! : 1 glDrawElementsInstanced_ACC_Exec (in GLEngine) + 268 [0x7fff400593cf] + ! : | + ! : 1 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] + ! : | + ! : 1 gldUpdateDispatch (in GeForceGLDriver) + 1193 [0x7fff30cd0bc2] + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2c5844 [0x7fff30c91844] + ! : | + ! 1 REN_collector::draw(xcam_class*) (in X-Plane) + 6327 [0x100ebdaa7] + ! : | + ! : 1 xdl_setup_group(xdl_group*, int) (in X-Plane) + 82 [0x1006abce2] + ! : | + ! : 1 glBindBuffer (in libGL.dylib) + 25 [0x7fff3f3e4f45] + ! : | + ! 1 REN_collector::draw(xcam_class*) (in X-Plane) + 326 [0x100ebc336] + ! : | + 5 OGL_terrain_grid(rendering_pass, int, int, int, int) (in X-Plane) + 693 [0x100b48b25] + ! : | + ! 1 plot_group_layers(rendering_pass, REN_region*, REN_collector*, int, int, int, int, int, xcam_class*) (in X-Plane) + 4163 [0x100b48253] + ! : | + ! : 1 void REN_quadtree<scene_patch_traits, 4>::iterate_cull_node<plot_bucket_layer, plot_bucket_layer>(REN_quadtree<scene_patch_traits, 4>::Node*, plot_bucket_layer const&, plot_bucket_layer&) (in X-Plane) + 2516 [0x100b4f554] + ! : | + ! 1 plot_group_layers(rendering_pass, REN_region*, REN_collector*, int, int, int, int, int, xcam_class*) (in X-Plane) + 4195 [0x100b48273] + ! : | + ! : 1 void REN_quadtree<scene_patch_traits, 4>::iterate_cull_node<plot_bucket_layer, plot_bucket_layer>(REN_quadtree<scene_patch_traits, 4>::Node*, plot_bucket_layer const&, plot_bucket_layer&) (in X-Plane) + 246 [0x100b4ec76] + ! : | + ! 1 plot_group_layers(rendering_pass, REN_region*, REN_collector*, int, int, int, int, int, xcam_class*) (in X-Plane) + 4227 [0x100b48293] + ! : | + ! : 1 void REN_quadtree<scene_patch_traits, 4>::iterate_cull_node<plot_bucket_layer, plot_bucket_layer>(REN_quadtree<scene_patch_traits, 4>::Node*, plot_bucket_layer const&, plot_bucket_layer&) (in X-Plane) + 1114 [0x100b4efda] + ! : | + ! 1 plot_group_layers(rendering_pass, REN_region*, REN_collector*, int, int, int, int, int, xcam_class*) (in X-Plane) + 4263 [0x100b482b7] + ! : | + ! : 1 void REN_quadtree<scene_patch_traits, 4>::iterate_cull_node<plot_bucket_layer, plot_bucket_layer>(REN_quadtree<scene_patch_traits, 4>::Node*, plot_bucket_layer const&, plot_bucket_layer&) (in X-Plane) + 188 [0x100b4ec3c] + ! : | + ! : 1 plot_bucket_layer::operator()(scene_patch_struct*) const (in X-Plane) + 112 [0x100b4b880] + ! : | + ! 1 plot_group_layers(rendering_pass, REN_region*, REN_collector*, int, int, int, int, int, xcam_class*) (in X-Plane) + 3023 [0x100b47ddf] + ! : | + 4 OGL_terrain_grid(rendering_pass, int, int, int, int) (in X-Plane) + 2451 [0x100b49203] + ! : | + ! 1 plot_group_layers(rendering_pass, REN_region*, REN_collector*, int, int, int, int, int, xcam_class*) (in X-Plane) + 3092 [0x100b47e24] + ! : | + ! : 1 REN_graphstate_terrain::can_be_lit() const (in X-Plane) + 16 [0x100ccd510] + ! : | + ! 1 plot_group_layers(rendering_pass, REN_region*, REN_collector*, int, int, int, int, int, xcam_class*) (in X-Plane) + 3483 [0x100b47fab] + ! : | + ! : 1 void REN_quadtree<scene_cluster_traits, 4>::iterate_cull_node<plot_bucket_layer, plot_bucket_layer>(REN_quadtree<scene_cluster_traits, 4>::Node*, plot_bucket_layer const&, plot_bucket_layer&) (in X-Plane) + 1050 [0x100b4e8aa] + ! : | + ! : 1 void REN_quadtree<scene_cluster_traits, 4>::iterate_cull_node<plot_bucket_layer, plot_bucket_layer>(REN_quadtree<scene_cluster_traits, 4>::Node*, plot_bucket_layer const&, plot_bucket_layer&) (in X-Plane) + 1027 [0x100b4e893] + ! : | + ! : 1 void REN_quadtree<scene_cluster_traits, 4>::iterate_cull_node<plot_bucket_layer, plot_bucket_layer>(REN_quadtree<scene_cluster_traits, 4>::Node*, plot_bucket_layer const&, plot_bucket_layer&) (in X-Plane) + 1050 [0x100b4e8aa] + ! : | + ! : 1 void REN_quadtree<scene_cluster_traits, 4>::iterate_cull_node<plot_bucket_layer, plot_bucket_layer>(REN_quadtree<scene_cluster_traits, 4>::Node*, plot_bucket_layer const&, plot_bucket_layer&) (in X-Plane) + 1027 [0x100b4e893] + ! : | + ! : 1 void REN_quadtree<scene_cluster_traits, 4>::iterate_cull_node<plot_bucket_layer, plot_bucket_layer>(REN_quadtree<scene_cluster_traits, 4>::Node*, plot_bucket_layer const&, plot_bucket_layer&) (in X-Plane) + 1073 [0x100b4e8c1] + ! : | + ! : 1 void REN_quadtree<scene_cluster_traits, 4>::iterate_cull_node<plot_bucket_layer, plot_bucket_layer>(REN_quadtree<scene_cluster_traits, 4>::Node*, plot_bucket_layer const&, plot_bucket_layer&) (in X-Plane) + 981 [0x100b4e865] + ! : | + ! : 1 REN_collector::add_cluster(obj_cluster*) (in X-Plane) + 37 [0x100ebe105] + ! : | + ! 1 plot_group_layers(rendering_pass, REN_region*, REN_collector*, int, int, int, int, int, xcam_class*) (in X-Plane) + 4195 [0x100b48273] + ! : | + ! : 1 void REN_quadtree<scene_patch_traits, 4>::iterate_cull_node<plot_bucket_layer, plot_bucket_layer>(REN_quadtree<scene_patch_traits, 4>::Node*, plot_bucket_layer const&, plot_bucket_layer&) (in X-Plane) + 1558 [0x100b4f196] + ! : | + ! : 1 plot_bucket_layer::operator()(scene_patch_struct*) const (in X-Plane) + 575 [0x100b4ba4f] + ! : | + ! : 1 REN_collector::add_xdl(REN_layer*, int, xdl*, float, float) (in X-Plane) + 215 [0x100ebdf27] + ! : | + ! : 1 REN_graphstate_terrain::get_type() const (in X-Plane) + 0 [0x100ccd4a0] + ! : | + ! 1 plot_group_layers(rendering_pass, REN_region*, REN_collector*, int, int, int, int, int, xcam_class*) (in X-Plane) + 4688 [0x100b48460] + ! : | + ! 1 void REN_quadtree<scene_drive_traits, 4>::iterate_cull_node<plot_bucket_layer, plot_bucket_layer>(REN_quadtree<scene_drive_traits, 4>::Node*, plot_bucket_layer const&, plot_bucket_layer&) (in X-Plane) + 1558 [0x100b4c756] + ! : | + ! 1 plot_bucket_layer::operator()(scene_drive_struct*) const (in X-Plane) + 148 [0x100b49a54] + ! : | + 1 OGL_terrain_grid(rendering_pass, int, int, int, int) (in X-Plane) + 2196 [0x100b49104] + ! : | + 1 REN_collector::sort_collection_and_prepare() (in X-Plane) + 5959 [0x100ebfa17] + ! : | + 1 std::vector<obj_instance_segment, std::allocator<obj_instance_segment> >::_M_insert_aux(__gnu_cxx::__normal_iterator<obj_instance_segment*, std::vector<obj_instance_segment, std::allocator<obj_instance_segment> > >, obj_instance_segment const&) (in X-Plane) + 612 [0x100ec24c4] + ! : | + 1 operator new(unsigned long) (in libc++abi.dylib) + 40 [0x7fff606b0f48] + ! : | + 1 malloc (in libsystem_malloc.dylib) + 24 [0x7fff6312d783] + ! : | + 1 malloc_zone_malloc (in libsystem_malloc.dylib) + 103 [0x7fff6312d807] + ! : | + 1 nanov2_malloc (in libsystem_malloc.dylib) + 56 [0x7fff6313a017] + ! : | + 1 nanov2_allocate (in libsystem_malloc.dylib) + 142 [0x7fff6313a0f6] + ! : | + 1 nanov2_allocate_from_block (in libsystem_malloc.dylib) + 28 [0x7fff6313a83c] + ! : | 4 WORLD_scene_per_render(rendering_pass, float, float, float, float) (in X-Plane) + 3328 [0x100b54a10] + ! : | + 3 veh_class::plot_plane_3D(rendering_pass, veh_view_type, int) (in X-Plane) + 3178 [0x10034c14a] + ! : | + ! 3 veh_class::plot_cockpit_obj(veh_view_type, rendering_pass, int, int) (in X-Plane) + 666 [0x10033d72a] + ! : | + ! 3 plot_obj(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 333 [0x10025aa8d] + ! : | + ! 1 plot_obj_common(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 3704 [0x100258ed8] + ! : | + ! : 1 glVertexAttrib4f (in libGL.dylib) + 0 [0x7fff3f3e54a6] + ! : | + ! 1 plot_obj_common(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 8540 [0x10025a1bc] + ! : | + ! : 1 glDrawElements_ACC_Exec (in GLEngine) + 261 [0x7fff400574ec] + ! : | + ! 1 plot_obj_common(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 793 [0x100258379] + ! : | + 1 veh_class::plot_plane_3D(rendering_pass, veh_view_type, int) (in X-Plane) + 1422 [0x10034ba6e] + ! : | + 1 veh_class::plot_attached_obj(int, int, int, xcam_class*) (in X-Plane) + 325 [0x10033db95] + ! : | + 1 plot_obj(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 333 [0x10025aa8d] + ! : | + 1 plot_obj_common(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 8540 [0x10025a1bc] + ! : | + 1 glDrawElements_ACC_Exec (in GLEngine) + 246 [0x7fff400574dd] + ! : | + 1 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] + ! : | + 1 gldUpdateDispatch (in GeForceGLDriver) + 1233 [0x7fff30cd0bea] + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x203315 [0x7fff30bcf315] + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2026f0 [0x7fff30bce6f0] + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2197a6 [0x7fff30be57a6] + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x218d7c [0x7fff30be4d7c] + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x218336 [0x7fff30be4336] + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x4de986 [0x7fff30eaa986] + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x4de60e [0x7fff30eaa60e] + ! : | 2 WORLD_scene_per_render(rendering_pass, float, float, float, float) (in X-Plane) + 9618 [0x100b562a2] + ! : | + 2 OGL_plot_lights(rendering_pass) (in X-Plane) + 71 [0x100b487e7] + ! : | + 1 plot_group_layers(rendering_pass, REN_region*, REN_collector*, int, int, int, int, int, xcam_class*) (in X-Plane) + 4195 [0x100b48273] + ! : | + ! 1 void REN_quadtree<scene_patch_traits, 4>::iterate_cull_node<plot_bucket_layer, plot_bucket_layer>(REN_quadtree<scene_patch_traits, 4>::Node*, plot_bucket_layer const&, plot_bucket_layer&) (in X-Plane) + 4005 [0x100b4fb25] + ! : | + ! 1 plot_bucket_layer::operator()(scene_patch_struct*) const (in X-Plane) + 1875 [0x100b4bf63] + ! : | + ! 1 xdl_draw(xdl*, float) (in X-Plane) + 546 [0x1006ab362] + ! : | + ! 1 glDrawArrays_ACC_Exec (in GLEngine) + 231 [0x7fff40056f95] + ! : | + ! 1 gleDoDrawDispatchCore (in GLEngine) + 817 [0x7fff40097134] + ! : | + ! 1 gleSelectVertexSubmitFunc (in GLEngine) + 283 [0x7fff3ff9dea3] + ! : | + 1 plot_group_layers(rendering_pass, REN_region*, REN_collector*, int, int, int, int, int, xcam_class*) (in X-Plane) + 2979 [0x100b47db3] + ! : | 1 WORLD_scene_per_render(rendering_pass, float, float, float, float) (in X-Plane) + 3338 [0x100b54a1a] + ! : | + 1 OGL_scenery_per_cockpit_blend(xcam_class*, rendering_pass) (in X-Plane) + 447 [0x10078440f] + ! : | + 1 veh_class::plot_plane_3D(rendering_pass, veh_view_type, int) (in X-Plane) + 2735 [0x10034bf8f] + ! : | + 1 veh_class::plot_attached_obj(int, int, int, xcam_class*) (in X-Plane) + 325 [0x10033db95] + ! : | + 1 plot_obj(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 333 [0x10025aa8d] + ! : | + 1 plot_obj_common(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 7549 [0x100259ddd] + ! : | + 1 OGL_terrain_shader_setup(OGL_terrain_shader const&) (in X-Plane) + 11052 [0x1001fc58c] + ! : | 1 WORLD_scene_per_render(rendering_pass, float, float, float, float) (in X-Plane) + 8905 [0x100b55fd9] + ! : | + 1 glDepthRange_Exec (in GLEngine) + 79 [0x7fff3ffc553f] + ! : | + 1 glDepthRangeArrayv_Core (in GLEngine) + 121 [0x7fff3ffe58b3] + ! : | 1 WORLD_scene_per_render(rendering_pass, float, float, float, float) (in X-Plane) + 10369 [0x100b56591] + ! : | + 1 dome_class::dome_plot1(rendering_pass, float, float, float, float, float, float) (in X-Plane) + 7149 [0x100772d4d] + ! : | + 1 OGL_sub_vbo::flush() (in X-Plane) + 348 [0x1000c42fc] + ! : | + 1 glDrawArrays_ACC_Exec (in GLEngine) + 231 [0x7fff40056f95] + ! : | + 1 gleDoDrawDispatchCore (in GLEngine) + 104 [0x7fff40096e6b] + ! : | + 1 gleUpdateDrawFramebufferState (in GLEngine) + 606 [0x7fff40095dfb] + ! : | + 1 gldUpdateDrawFramebuffer (in libGPUSupportMercury.dylib) + 166 [0x7fff518e60c1] + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e9232 [0x7fff30cb5232] + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2c1cd2 [0x7fff30c8dcd2] + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2ea682 [0x7fff30cb6682] + ! : | + 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2c2ad5 [0x7fff30c8ead5] + ! : | 1 WORLD_scene_per_render(rendering_pass, float, float, float, float) (in X-Plane) + 10673 [0x100b566c1] + ! : | + 1 dome_class::dome_plot2(rendering_pass, float, float, float, float, float, float) (in X-Plane) + 10331 [0x10076f19b] + ! : | + 1 dome_class::plot_2d_glares_internal(rendering_pass, float, float, float, float, float, float, int) (in X-Plane) + 6567 [0x10076bc07] + ! : | + 1 OGL_set_legacy_shader(ogl_fog_mode, int, ogl_lit_mode, ogl_al_mode, ogl_deR_mode, ogl_deW_mode) (in X-Plane) + 439 [0x1000b3977] + ! : | + 1 OGL_shader_conditional::bind(unsigned long long) (in X-Plane) + 190 [0x1000bde6e] + ! : | + 1 glUseProgramObjectARB_Exec (in GLEngine) + 217 [0x7fff4000ee6e] + ! : | + 1 gleUseProgramObject (in GLEngine) + 400 [0x7fff400b92ec] + ! : | + 1 gleUpdateCurrentProgramState (in GLEngine) + 1 [0x7fff400b8825] + ! : | 1 WORLD_scene_per_render(rendering_pass, float, float, float, float) (in X-Plane) + 17490 [0x100b58162] + ! : | 1 glob_class::glob_plot(rendering_pass) (in X-Plane) + 820 [0x100bbea14] + ! : | 1 hi_res_planet(rendering_pass, int, int, int, int) (in X-Plane) + 7618 [0x100bbd4c2] + ! : | 1 xdl_draw(xdl*, float) (in X-Plane) + 849 [0x1006ab491] + ! : | 1 glDrawElementsBaseVertex_ACC_Exec (in GLEngine) + 238 [0x7fff400599c4] + ! : | 1 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] + ! : | 1 gldUpdateDispatch (in GeForceGLDriver) + 1233 [0x7fff30cd0bea] + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x203526 [0x7fff30bcf526] + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x21f8fa [0x7fff30beb8fa] + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x4df0ea [0x7fff30eab0ea] + ! : 12 WORLD_scene_per_frame(xplane_window*, int, int) (in X-Plane) + 3159 [0x100b59d57] + ! : | 8 grab_panel_textures(int, int, int) (in X-Plane) + 1584 [0x1009dd930] + ! : | + 8 grab_one_panel_texture(OGL_framebuffer*, int, int, int, int, int, panel_draw_type, int, int) (in X-Plane) + 914 [0x1009dd292] + ! : | + 3 APP_update_panel(panel_draw_type, int) (in X-Plane) + 22236 [0x100a41f1c] + ! : | + ! 2 update_gen_ins() (in X-Plane) + 23911 [0x1009d6597] + ! : | + ! : 2 plot_ins_overlay(float, float, float, float, float, int, int, int) (in X-Plane) + 961 [0x1009a1ed1] + ! : | + ! : 2 OGL_glBegin(unsigned int) (in X-Plane) + 271 [0x1000b2eff] + ! : | + ! : 2 OGL_sub_vbo::get_chunk_indexed(unsigned int, int, int, float volatile**, unsigned int volatile**) (in X-Plane) + 92 [0x1000c445c] + ! : | + ! : 2 OGL_buffer_range<unsigned int, &(OGL_bind_vbo_ind(unsigned int))>::get_memory(int, unsigned int volatile**) (in X-Plane) + 536 [0x10009dd98] + ! : | + ! : 1 glBufferData_Exec (in GLEngine) + 515 [0x7fff3ffd97aa] + ! : | + ! : | 1 gleOrphanBufferObject (in GLEngine) + 205 [0x7fff40090601] + ! : | + ! : | 1 gldGetMemoryPlugin (in GeForceGLDriver) + 198 [0x7fff30cb86b2] + ! : | + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2f7d2f [0x7fff30cc3d2f] + ! : | + ! : 1 glBufferData_Exec (in GLEngine) + 555 [0x7fff3ffd97d2] + ! : | + ! : 1 gleApplyBufferData (in GLEngine) + 22 [0x7fff3ffd9abc] + ! : | + ! : 1 gleBufferObjectAdoptOrphan (in GLEngine) + 114 [0x7fff40090a6c] + ! : | + ! : 1 gldSetMemoryPlugin (in GeForceGLDriver) + 477 [0x7fff30cb8972] + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2c79f8 [0x7fff30c939f8] + ! : | + ! : 1 malloc (in libsystem_malloc.dylib) + 24 [0x7fff6312d783] + ! : | + ! : 1 malloc_zone_malloc (in libsystem_malloc.dylib) + 103 [0x7fff6312d807] + ! : | + ! : 1 nanov2_malloc (in libsystem_malloc.dylib) + 56 [0x7fff6313a017] + ! : | + ! : 1 nanov2_allocate (in libsystem_malloc.dylib) + 381 [0x7fff6313a1e5] + ! : | + ! 1 update_gen_ins() (in X-Plane) + 6815 [0x1009d22cf] + ! : | + ! 1 plot_solid_0_10_vert(float, float, float, int, int, int, int) (in X-Plane) + 3624 [0x100a1a6d8] + ! : | + ! 1 ins_quad(int, float, float, float, float, float, float, float, float, float, int) (in X-Plane) + 1135 [0x1009ac7ef] + ! : | + ! 1 ins_quad(int, float, float, float, float, float, float, float, float, float, int) (in X-Plane) + 881 [0x1009ac6f1] + ! : | + ! 1 handle_vert() (in X-Plane) + 276 [0x1000b3124] + ! : | + 1 APP_update_panel(panel_draw_type, int) (in X-Plane) + 18598 [0x100a410e6] + ! : | + ! 1 update_HSI() (in X-Plane) + 2548 [0x100a14324] + ! : | + ! 1 plot_ins_overlay(float, float, float, float, float, int, int, int) (in X-Plane) + 1539 [0x1009a2113] + ! : | + ! 1 plot_ins_overlay(float, float, float, float, float, int, int, int) (in X-Plane) + 2200 [0x1009a23a8] + ! : | + ! 1 OGL_Rotatef(float, float, float, float) (in X-Plane) + 79 [0x1000cb4ff] + ! : | + ! 1 applyRotationf(float*, float, float, float, float) (in X-Plane) + 27 [0x1000b560b] + ! : | + ! 1 buildRotationf(float*, float, float, float, float) (in X-Plane) + 53 [0x1000b5315] + ! : | + ! 1 sin (in libsystem_m.dylib) + 81 [0x7fff630e1201] + ! : | + 1 APP_update_panel(panel_draw_type, int) (in X-Plane) + 24593 [0x100a42851] + ! : | + ! 1 update_NAV_COM_ADF() (in X-Plane) + 12461 [0x1009fd82d] + ! : | + ! 1 bc_box(int, int*, int*, int*, int*) (in X-Plane) + 1556 [0x1009f8be4] + ! : | + ! 1 plot_ins_overlay(float, float, float, float, float, int, int, int) (in X-Plane) + 1312 [0x1009a2030] + ! : | + ! 1 OGL_glEnd() (in X-Plane) + 90 [0x1000b216a] + ! : | + ! 1 OGL_sub_vbo::flush() (in X-Plane) + 308 [0x1000c42d4] + ! : | + ! 1 OGL_DrawElements(unsigned int, int, unsigned int, void const*) (in X-Plane) + 82 [0x10009b912] + ! : | + ! 1 legacy_sync(unsigned int, void*) (in X-Plane) + 1125 [0x10069b9f5] + ! : | + ! 1 setUniform (in GLEngine) + 187 [0x7fff40028fbb] + ! : | + ! 1 setProgramUniformInner (in GLEngine) + 94 [0x7fff40033aee] + ! : | + ! 1 getTypeInfo (in GLEngine) + 83 [0x7fff40034eb3] + ! : | + 1 APP_update_panel(panel_draw_type, int) (in X-Plane) + 25869 [0x100a42d4d] + ! : | + ! 1 update_turn() (in X-Plane) + 251 [0x100a0e4eb] + ! : | + ! 1 OGL_glEnd() (in X-Plane) + 90 [0x1000b216a] + ! : | + ! 1 OGL_sub_vbo::flush() (in X-Plane) + 308 [0x1000c42d4] + ! : | + ! 1 glDrawElements_ACC_Exec (in GLEngine) + 246 [0x7fff400574dd] + ! : | + ! 1 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] + ! : | + ! 1 gldUpdateDispatch (in GeForceGLDriver) + 1233 [0x7fff30cd0bea] + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2032f8 [0x7fff30bcf2f8] + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x676507 [0x7fff31042507] + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2007a6 [0x7fff30bcc7a6] + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1fc80c [0x7fff30bc880c] + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2be1ba [0x7fff30c8a1ba] + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2be2f0 [0x7fff30c8a2f0] + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x64db7f [0x7fff31019b7f] + ! : | + 1 APP_update_panel(panel_draw_type, int) (in X-Plane) + 25972 [0x100a42db4] + ! : | + ! 1 update_altitude() (in X-Plane) + 1221 [0x100a0ef45] + ! : | + ! 1 plot_ins_overlay(float, float, float, float, float, int, int, int) (in X-Plane) + 1476 [0x1009a20d4] + ! : | + ! 1 plot_ins_overlay(float, float, float, float, float, int, int, int) (in X-Plane) + 1064 [0x1009a1f38] + ! : | + ! 1 handle_vert() (in X-Plane) + 358 [0x1000b3176] + ! : | + 1 APP_update_panel(panel_draw_type, int) (in X-Plane) + 26000 [0x100a42dd0] + ! : | + 1 update_art_horiz() (in X-Plane) + 4076 [0x100a1120c] + ! : | + 1 plot_ins_overlay(float, float, float, float, float, int, int, int) (in X-Plane) + 1312 [0x1009a2030] + ! : | + 1 OGL_glEnd() (in X-Plane) + 90 [0x1000b216a] + ! : | + 1 OGL_sub_vbo::flush() (in X-Plane) + 39 [0x1000c41c7] + ! : | + 1 OGL_buffer_range<unsigned int, &(OGL_bind_vbo_ind(unsigned int))>::flush() (in X-Plane) + 62 [0x10009da3e] + ! : | 4 grab_panel_textures(int, int, int) (in X-Plane) + 1491 [0x1009dd8d3] + ! : | 3 grab_one_panel_texture(OGL_framebuffer*, int, int, int, int, int, panel_draw_type, int, int) (in X-Plane) + 421 [0x1009dd0a5] + ! : | ! 2 APP_update_panel(panel_draw_type, int) (in X-Plane) + 22236 [0x100a41f1c] + ! : | ! : 1 update_gen_ins() (in X-Plane) + 23911 [0x1009d6597] + ! : | ! : | 1 plot_ins_overlay(float, float, float, float, float, int, int, int) (in X-Plane) + 1312 [0x1009a2030] + ! : | ! : | 1 OGL_glEnd() (in X-Plane) + 90 [0x1000b216a] + ! : | ! : | 1 OGL_sub_vbo::flush() (in X-Plane) + 308 [0x1000c42d4] + ! : | ! : | 1 glDrawElements_ACC_Exec (in GLEngine) + 246 [0x7fff400574dd] + ! : | ! : | 1 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] + ! : | ! : | 1 gldUpdateDispatch (in GeForceGLDriver) + 1233 [0x7fff30cd0bea] + ! : | ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x202b6a [0x7fff30bceb6a] + ! : | ! : 1 update_gen_ins() (in X-Plane) + 26625 [0x1009d7031] + ! : | ! : 1 XPLMGetDatai (in XPLM) + 0 [0x7f1d7450] + ! : | ! 1 APP_update_panel(panel_draw_type, int) (in X-Plane) + 9521 [0x100a3ed71] + ! : | ! 1 OGL_plot_back_tex(int) (in X-Plane) + 1760 [0x1001f5ea0] + ! : | ! 1 OGL_glEnd() (in X-Plane) + 90 [0x1000b216a] + ! : | ! 1 OGL_sub_vbo::flush() (in X-Plane) + 308 [0x1000c42d4] + ! : | ! 1 glDrawElements_ACC_Exec (in GLEngine) + 246 [0x7fff400574dd] + ! : | ! 1 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] + ! : | ! 1 gldUpdateDispatch (in GeForceGLDriver) + 1233 [0x7fff30cd0bea] + ! : | ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x202b44 [0x7fff30bceb44] + ! : | ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2026f0 [0x7fff30bce6f0] + ! : | ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2197a6 [0x7fff30be57a6] + ! : | ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x218d7c [0x7fff30be4d7c] + ! : | ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x218336 [0x7fff30be4336] + ! : | ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x4dea14 [0x7fff30eaaa14] + ! : | ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x4de88f [0x7fff30eaa88f] + ! : | ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x4dbd30 [0x7fff30ea7d30] + ! : | ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x22169c [0x7fff30bed69c] + ! : | ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x20b11d [0x7fff30bd711d] + ! : | ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e6cfd [0x7fff30cb2cfd] + ! : | 1 grab_one_panel_texture(OGL_framebuffer*, int, int, int, int, int, panel_draw_type, int, int) (in X-Plane) + 403 [0x1009dd093] + ! : | 1 OGL_glEnd() (in X-Plane) + 90 [0x1000b216a] + ! : | 1 OGL_sub_vbo::flush() (in X-Plane) + 308 [0x1000c42d4] + ! : | 1 glDrawElements_ACC_Exec (in GLEngine) + 246 [0x7fff400574dd] + ! : | 1 gleDoDrawDispatchCore (in GLEngine) + 104 [0x7fff40096e6b] + ! : | 1 gleUpdateDrawFramebufferState (in GLEngine) + 606 [0x7fff40095dfb] + ! : | 1 gldUpdateDrawFramebuffer (in libGPUSupportMercury.dylib) + 117 [0x7fff518e6090] + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x306d6d [0x7fff30cd2d6d] + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2eb4df [0x7fff30cb74df] + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2ea682 [0x7fff30cb6682] + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2c287b [0x7fff30c8e87b] + ! : | 1 small_free_list_add_ptr (in libsystem_malloc.dylib) + 625 [0x7fff63132852] + ! : 5 WORLD_scene_per_frame(xplane_window*, int, int) (in X-Plane) + 1670 [0x100b59786] + ! : | 5 veh_class::make_shadow_per_frame(float*) (in X-Plane) + 893 [0x100d9bc5d] + ! : | 3 veh_class::plot_plane_3D(rendering_pass, veh_view_type, int) (in X-Plane) + 1422 [0x10034ba6e] + ! : | + 3 veh_class::plot_attached_obj(int, int, int, xcam_class*) (in X-Plane) + 325 [0x10033db95] + ! : | + 3 plot_obj(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 333 [0x10025aa8d] + ! : | + 2 plot_obj_common(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 8540 [0x10025a1bc] + ! : | + ! 2 glDrawElements_ACC_Exec (in GLEngine) + 246 [0x7fff400574dd] + ! : | + ! 2 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] + ! : | + ! 1 gldUpdateDispatch (in GeForceGLDriver) + 1046 [0x7fff30cd0b2f] + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x31a88f [0x7fff30ce688f] + ! : | + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x30aa3e [0x7fff30cd6a3e] + ! : | + ! 1 gldUpdateDispatch (in GeForceGLDriver) + 1233 [0x7fff30cd0bea] + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2034b5 [0x7fff30bcf4b5] + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2079a7 [0x7fff30bd39a7] + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x6744a3 [0x7fff310404a3] + ! : | + ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x674243 [0x7fff31040243] + ! : | + ! 1 _platform_memmove$VARIANT$Nehalem (in libsystem_platform.dylib) + 138 [0x7fff6316964a] + ! : | + 1 plot_obj_common(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 7549 [0x100259ddd] + ! : | + 1 OGL_terrain_shader_setup(OGL_terrain_shader const&) (in X-Plane) + 585 [0x1001f9ca9] + ! : | + 1 OGL_set_shader_transforms(OGL_shader_conditional*, unsigned long long, int, int, int, int) (in X-Plane) + 50 [0x1000b97d2] + ! : | + 1 OGL_shader_conditional::get_uniform_loc(unsigned long long, int) const (in X-Plane) + 73 [0x1000b9729] + ! : | 2 veh_class::plot_plane_3D(rendering_pass, veh_view_type, int) (in X-Plane) + 3533 [0x10034c2ad] + ! : | 2 veh_class::plot_cockpit_obj(veh_view_type, rendering_pass, int, int) (in X-Plane) + 666 [0x10033d72a] + ! : | 2 plot_obj(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 333 [0x10025aa8d] + ! : | 2 plot_obj_common(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 8540 [0x10025a1bc] + ! : | 2 glDrawElements_ACC_Exec (in GLEngine) + 246 [0x7fff400574dd] + ! : | 2 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] + ! : | 2 gldUpdateDispatch (in GeForceGLDriver) + 1233 [0x7fff30cd0bea] + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2032f8 [0x7fff30bcf2f8] + ! : | ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x6764b7 [0x7fff310424b7] + ! : | ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x20796b [0x7fff30bd396b] + ! : | ! 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e6cd0 [0x7fff30cb2cd0] + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x203526 [0x7fff30bcf526] + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x21f94c [0x7fff30beb94c] + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2be1ba [0x7fff30c8a1ba] + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2be30d [0x7fff30c8a30d] + ! : 2 WORLD_scene_per_frame(xplane_window*, int, int) (in X-Plane) + 705 [0x100b593c1] + ! : | 2 skyc_class::conditions_update_per_frame() (in X-Plane) + 15369,15683 [0x100799be9,0x100799d23] + ! : 1 WORLD_scene_per_frame(xplane_window*, int, int) (in X-Plane) + 4246 [0x100b5a196] + ! : 1 WORLD_scene_per_render(rendering_pass, float, float, float, float) (in X-Plane) + 11696 [0x100b56ac0] + ! : 1 dome_class::dome_plot1(rendering_pass, float, float, float, float, float, float) (in X-Plane) + 7246 [0x100772dae] + ! : 1 dome_class::plot_2d_glares_internal(rendering_pass, float, float, float, float, float, float, int) (in X-Plane) + 6567 [0x10076bc07] + ! : 1 OGL_set_legacy_shader(ogl_fog_mode, int, ogl_lit_mode, ogl_al_mode, ogl_deR_mode, ogl_deW_mode) (in X-Plane) + 439 [0x1000b3977] + ! : 1 OGL_shader_conditional::bind(unsigned long long) (in X-Plane) + 190 [0x1000bde6e] + ! : 1 glUseProgramObjectARB_Exec (in GLEngine) + 217 [0x7fff4000ee6e] + ! : 1 gleUseProgramObject (in GLEngine) + 486 [0x7fff400b9342] + ! : 1 gleUnbindProgramObject (in GLEngine) + 89 [0x7fff400b93e6] + ! : 1 gldUnbindPipelineProgram (in GeForceGLDriver) + 0 [0x7fff30cd667e] + ! 8 APP_update() (in X-Plane) + 4987 [0x1005e4a5b] + ! : 7 flit_per_frame() (in X-Plane) + 3229 [0x1007ecb2d] + ! : | 7 fm_task::do_it(int) (in X-Plane) + 13 [0x1007ed58d] + ! : | 4 flt_class::update_with_fullsim() (in X-Plane) + 397 [0x1007f183d] + ! : | + 2 flt_class::update_flight() (in X-Plane) + 73880 [0x1007b76f8] + ! : | + ! 2 tire_class::handle_contact_point(int, int, int, float, float, float, float, float, float, float, float, float, float, float, int, float, float, float, float, float, float, int, float) (in X-Plane) + 688 [0x100808050] + ! : | + ! 2 yter_class::ret_ter_y_full(float, float, float, int, float*, float*, float*) (in X-Plane) + 6524,6795 [0x10031c77c,0x10031c88b] + ! : | + 1 flt_class::update_flight() (in X-Plane) + 14256 [0x1007a8e10] + ! : | + ! 1 ??? (in libsystem_m.dylib) load address 0x7fff630e0000 + 0x11b6a [0x7fff630f1b6a] + ! : | + 1 flt_class::update_flight() (in X-Plane) + 68051 [0x1007b6033] + ! : | + 1 tire_class::handle_contact_point(int, int, int, float, float, float, float, float, float, float, float, float, float, float, int, float, float, float, float, float, float, int, float) (in X-Plane) + 688 [0x100808050] + ! : | + 1 yter_class::ret_ter_y_full(float, float, float, int, float*, float*, float*) (in X-Plane) + 6839 [0x10031c8b7] + ! : | 3 flt_class::update_with_fullsim() (in X-Plane) + 750 [0x1007f199e] + ! : | 3 flt_class::update_systems_p_0() (in X-Plane) + 47 [0x1007eeb4f] + ! : | 1 navi_class::manage_navi_per_frame_fm() (in X-Plane) + 1776 [0x1007ce080] + ! : | ! 1 navi_class::handle_nav(int) (in X-Plane) + 3567 [0x1007cd40f] + ! : | ! 1 navt_class::check_nav(int, float*, float*) (in X-Plane) + 812 [0x1006f65dc] + ! : | ! 1 acos (in libsystem_m.dylib) + 353 [0x7fff630e4258] + ! : | 1 navi_class::manage_navi_per_frame_fm() (in X-Plane) + 1914 [0x1007ce10a] + ! : | ! 1 navi_class::handle_nav(int) (in X-Plane) + 2588 [0x1007cd03c] + ! : | 1 navi_class::manage_navi_per_frame_fm() (in X-Plane) + 8332 [0x1007cfa1c] + ! : | 1 navi_class::handle_nav(int) (in X-Plane) + 2226 [0x1007cced2] + ! : | 1 __gnu_cxx::hashtable<std::pair<long const, long>, long, __gnu_cxx::hash<long>, std::_Select1st<std::pair<long const, long> >, std::equal_to<long>, std::allocator<long> >::equal_range(long const&) (in X-Plane) + 96 [0x1001b1300] + ! : 1 flit_per_frame() (in X-Plane) + 3209 [0x1007ecb19] + ! : 1 UTL_threadpool::queue_task_multi(UTL_pool_task*, int, int) (in X-Plane) + 112 [0x1006b7e60] + ! : 1 void UTL_message_queue_multi_write<UTL_pool_task*>(UTL_message_queue<UTL_pool_task*>*, UTL_pool_task**, int, int) (in X-Plane) + 619 [0x1000e4e8b] + ! : 1 UTL_semaphore_inc(UTL_semaphore*) (in X-Plane) + 56 [0x1000e4208] + ! : 1 semaphore_signal_trap (in libsystem_kernel.dylib) + 10 [0x7fff630b8c42] + ! 4 APP_update() (in X-Plane) + 1938 [0x1005e3e72] + ! : 4 p_floating_gauge::renderGaugeToFBO() (in X-Plane) + 266 [0x1009be45a] + ! : 4 XGNS430::GNS430ui::draw(int, int, int, int, int, int, float) (in X-Plane) + 1935 [0x10088613f] + ! : 1 XGNS430::GNS430Page::drawText(int, int, int, int, bool, int, float) (in X-Plane) + 897 [0x100879081] + ! : | 1 OGL_font::draw_range(int, int, float, float, unsigned char const*, unsigned char const*, float, float, just_t, float) (in X-Plane) + 115 [0x1000acd43] + ! : | 1 OGL_font::setup_ogl(int, int, float, int) (in X-Plane) + 1011 [0x1000ac343] + ! : | 1 OGL_quad_stream::begin() (in X-Plane) + 93 [0x1000b94dd] + ! : | 1 glBufferData_Exec (in GLEngine) + 555 [0x7fff3ffd97d2] + ! : | 1 gleApplyBufferData (in GLEngine) + 22 [0x7fff3ffd9abc] + ! : | 1 gleBufferObjectAdoptOrphan (in GLEngine) + 114 [0x7fff40090a6c] + ! : | 1 gldSetMemoryPlugin (in GeForceGLDriver) + 477 [0x7fff30cb8972] + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2c7a8b [0x7fff30c93a8b] + ! : 1 XGNS430::GNS430Page::drawText(int, int, int, int, bool, int, float) (in X-Plane) + 2347 [0x10087962b] + ! : | 1 XGNS430::PageDefaultNavMap::doDrawText() (in X-Plane) + 5366 [0x100899df6] + ! : | 1 snprintf (in libsystem_c.dylib) + 156 [0x7fff6300e4d5] + ! : | 1 vsnprintf_l (in libsystem_c.dylib) + 41 [0x7fff6301d5cc] + ! : | 1 _vsnprintf (in libsystem_c.dylib) + 410 [0x7fff6301d56f] + ! : | 1 __v2printf (in libsystem_c.dylib) + 475 [0x7fff6303813b] + ! : | 1 __vfprintf (in libsystem_c.dylib) + 8711 [0x7fff63011b65] + ! : | 1 _platform_strlen (in libsystem_platform.dylib) + 22 [0x7fff63166716] + ! : 1 XGNS430::GNS430Page::drawText(int, int, int, int, bool, int, float) (in X-Plane) + 2361 [0x100879639] + ! : | 1 XGNS430::BasicPage::drawTexts() (in X-Plane) + 1437 [0x1008659cd] + ! : | 1 OGL_font::draw_range(int, int, float, float, unsigned char const*, unsigned char const*, float, float, just_t, float) (in X-Plane) + 115 [0x1000acd43] + ! : | 1 OGL_font::setup_ogl(int, int, float, int) (in X-Plane) + 1011 [0x1000ac343] + ! : | 1 OGL_quad_stream::begin() (in X-Plane) + 93 [0x1000b94dd] + ! : | 1 glBufferData_Exec (in GLEngine) + 537 [0x7fff3ffd97c0] + ! : | 1 gleAcquireBufferData (in GLEngine) + 134 [0x7fff3ffd99cf] + ! : | 1 gleGetFreeOrphanNode (in GLEngine) + 335 [0x7fff4009094e] + ! : | 1 gldTestMemoryPlugin (in GeForceGLDriver) + 17 [0x7fff30cb89d5] + ! : | 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2eca0f [0x7fff30cb8a0f] + ! : | 1 CFGetRetainCount (in CoreFoundation) + 20 [0x7fff35e75f0a] + ! : 1 XGNS430::GNS430Page::drawText(int, int, int, int, bool, int, float) (in X-Plane) + 3457 [0x100879a81] + ! : 1 OGL_font::draw_range(int, int, float, float, unsigned char const*, unsigned char const*, float, float, just_t, float) (in X-Plane) + 2227 [0x1000ad583] + ! : 1 OGL_quad_stream::end() (in X-Plane) + 298 [0x1000b946a] + ! : 1 glDrawElements_ACC_Exec (in GLEngine) + 412 [0x7fff40057583] + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2e8d45 [0x7fff30cb4d45] + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1ecdea [0x7fff30bb8dea] + ! : 1 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x1eef91 [0x7fff30bbaf91] + ! 1 APP_update() (in X-Plane) + 6044 [0x1005e4e7c] + ! 1 help_class::mouse_help_per_wind(int) (in X-Plane) + 1470 [0x1003f386e] + ! 1 gui_event_dispatcher::event_cursor_adjust(float, float, mouse_cursor_type*) (in X-Plane) + 85 [0x100081f75] + ! 1 gui_widget_controller::get_top_widget() (in X-Plane) + 31 [0x10008cc3f] + 152 MACIBM_post_event_proc() (in X-Plane) + 381 [0x100dd899d] + 152 qtim_class::mov_per_frame() (in X-Plane) + 438 [0x100e1e896] + 152 qtim_class::draw_stuff_after_qt_capture_and_sbuff() (in X-Plane) + 97 [0x100e1bd21] + 152 OGL_sbuff() (in X-Plane) + 338 [0x1000cc7f2] + 152 glSwap_Exec (in GLEngine) + 97 [0x7fff3ffb2991] + 149 gldPresentFramebufferData (in GeForceGLDriver) + 503 [0x7fff30cd17a9] + : 149 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x30538c [0x7fff30cd138c] + : 149 gpusSubmitDataBuffers (in libGPUSupportMercury.dylib) + 137 [0x7fff518e4574] + : 148 IOAccelContextSubmitDataBuffersExt2 (in IOAccelerator) + 248 [0x7fff53c99c4c] + : | 148 IOConnectCallStructMethod (in IOKit) + 38 [0x7fff388af54a] + : | 148 IOConnectCallMethod (in IOKit) + 244 [0x7fff388aed3d] + : | 148 io_connect_method (in IOKit) + 374 [0x7fff388aeedb] + : | 148 mach_msg (in libsystem_kernel.dylib) + 60 [0x7fff630b9174] + : | 148 mach_msg_trap (in libsystem_kernel.dylib) + 10 [0x7fff630b8c2a] + : 1 IOAccelContextSubmitDataBuffersExt2 (in IOAccelerator) + 136 [0x7fff53c99bdc] + 3 gldPresentFramebufferData (in GeForceGLDriver) + 826 [0x7fff30cd18ec] + 3 SLSFlushSurfaceWithOptionsAndIndex (in SkyLight) + 361 [0x7fff5be5bebc] + 3 mach_msg (in libsystem_kernel.dylib) + 60 [0x7fff630b9174] + 3 mach_msg_trap (in libsystem_kernel.dylib) + 10 [0x7fff630b8c2a] 636 Thread_1455722 + 636 thread_start (in libsystem_pthread.dylib) + 13 [0x7fff63171425] + 636 _pthread_start (in libsystem_pthread.dylib) + 70 [0x7fff631752a7] + 636 _pthread_body (in libsystem_pthread.dylib) + 126 [0x7fff6317233d] + 636 THREAD_launch(void*) (in X-Plane) + 69 [0x100e04845] + 636 UTL_threadpool::thread_func(void*) (in X-Plane) + 60 [0x1006b7bfc] + 636 UTL_pool_task* UTL_message_queue_read<UTL_pool_task*>(UTL_message_queue<UTL_pool_task*>*, int) (in X-Plane) + 45 [0x1000e4bbd] + 636 UTL_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 140 [0x1000e42bc] + 636 UTL_platform_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 159 [0x1000e406f] + 636 semaphore_wait_trap (in libsystem_kernel.dylib) + 10 [0x7fff630b8c66] 636 Thread_1455723 + 636 thread_start (in libsystem_pthread.dylib) + 13 [0x7fff63171425] + 636 _pthread_start (in libsystem_pthread.dylib) + 70 [0x7fff631752a7] + 636 _pthread_body (in libsystem_pthread.dylib) + 126 [0x7fff6317233d] + 636 THREAD_launch(void*) (in X-Plane) + 69 [0x100e04845] + 630 UTL_threadpool::thread_func(void*) (in X-Plane) + 60 [0x1006b7bfc] + ! 630 UTL_pool_task* UTL_message_queue_read<UTL_pool_task*>(UTL_message_queue<UTL_pool_task*>*, int) (in X-Plane) + 45 [0x1000e4bbd] + ! 630 UTL_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 140 [0x1000e42bc] + ! 630 UTL_platform_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 159 [0x1000e406f] + ! 630 semaphore_wait_trap (in libsystem_kernel.dylib) + 10 [0x7fff630b8c66] + 6 UTL_threadpool::thread_func(void*) (in X-Plane) + 80 [0x1006b7c10] + 6 UTL_threadpool_swarm::do_it(int) (in X-Plane) + 74 [0x1006b7b5a] + 6 fm_task::do_it(int) (in X-Plane) + 13 [0x1007ed58d] + 3 flt_class::update_with_fullsim() (in X-Plane) + 397 [0x1007f183d] + : 3 flt_class::update_flight() (in X-Plane) + 73880 [0x1007b76f8] + : 3 tire_class::handle_contact_point(int, int, int, float, float, float, float, float, float, float, float, float, float, float, int, float, float, float, float, float, float, int, float) (in X-Plane) + 688 [0x100808050] + : 3 yter_class::ret_ter_y_full(float, float, float, int, float*, float*, float*) (in X-Plane) + 6225,6839,... [0x10031c651,0x10031c8b7,...] + 2 flt_class::update_with_fullsim() (in X-Plane) + 389 [0x1007f1835] + : 2 flt_class::update_defs(int) (in X-Plane) + 29464 [0x1001a4528] + : 2 veh_part_class::build_part_geo(veh_class*, int, int) (in X-Plane) + 1381,6888 [0x1003319e5,0x100332f68] + 1 flt_class::update_with_fullsim() (in X-Plane) + 356 [0x1007f1814] + 1 flt_class::update_otto_ai() (in X-Plane) + 12622 [0x1007f884e] + 1 natc_class::natc_per_frame() (in X-Plane) + 2682 [0x100e90aca] + 1 atan2 (in libsystem_m.dylib) + 651 [0x7fff630e30ab] 636 Thread_1455724 + 636 thread_start (in libsystem_pthread.dylib) + 13 [0x7fff63171425] + 636 _pthread_start (in libsystem_pthread.dylib) + 70 [0x7fff631752a7] + 636 _pthread_body (in libsystem_pthread.dylib) + 126 [0x7fff6317233d] + 636 THREAD_launch(void*) (in X-Plane) + 69 [0x100e04845] + 636 UTL_threadpool::thread_func(void*) (in X-Plane) + 60 [0x1006b7bfc] + 636 UTL_pool_task* UTL_message_queue_read<UTL_pool_task*>(UTL_message_queue<UTL_pool_task*>*, int) (in X-Plane) + 45 [0x1000e4bbd] + 636 UTL_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 140 [0x1000e42bc] + 636 UTL_platform_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 159 [0x1000e406f] + 636 semaphore_wait_trap (in libsystem_kernel.dylib) + 10 [0x7fff630b8c66] 636 Thread_1455725 + 636 thread_start (in libsystem_pthread.dylib) + 13 [0x7fff63171425] + 636 _pthread_start (in libsystem_pthread.dylib) + 70 [0x7fff631752a7] + 636 _pthread_body (in libsystem_pthread.dylib) + 126 [0x7fff6317233d] + 636 THREAD_launch(void*) (in X-Plane) + 69 [0x100e04845] + 636 UTL_threadpool::thread_func(void*) (in X-Plane) + 60 [0x1006b7bfc] + 636 UTL_pool_task* UTL_message_queue_read<UTL_pool_task*>(UTL_message_queue<UTL_pool_task*>*, int) (in X-Plane) + 45 [0x1000e4bbd] + 636 UTL_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 140 [0x1000e42bc] + 636 UTL_platform_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 159 [0x1000e406f] + 636 semaphore_wait_trap (in libsystem_kernel.dylib) + 10 [0x7fff630b8c66] 636 Thread_1455726 + 636 thread_start (in libsystem_pthread.dylib) + 13 [0x7fff63171425] + 636 _pthread_start (in libsystem_pthread.dylib) + 70 [0x7fff631752a7] + 636 _pthread_body (in libsystem_pthread.dylib) + 126 [0x7fff6317233d] + 636 THREAD_launch(void*) (in X-Plane) + 69 [0x100e04845] + 635 UTL_threadpool::thread_func(void*) (in X-Plane) + 60 [0x1006b7bfc] + ! 635 UTL_pool_task* UTL_message_queue_read<UTL_pool_task*>(UTL_message_queue<UTL_pool_task*>*, int) (in X-Plane) + 45 [0x1000e4bbd] + ! 635 UTL_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 140 [0x1000e42bc] + ! 635 UTL_platform_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 159 [0x1000e406f] + ! 635 semaphore_wait_trap (in libsystem_kernel.dylib) + 10 [0x7fff630b8c66] + 1 UTL_threadpool::thread_func(void*) (in X-Plane) + 80 [0x1006b7c10] + 1 UTL_threadpool_swarm::do_it(int) (in X-Plane) + 74 [0x1006b7b5a] + 1 fm_task::do_it(int) (in X-Plane) + 13 [0x1007ed58d] + 1 flt_class::update_with_fullsim() (in X-Plane) + 389 [0x1007f1835] + 1 flt_class::update_defs(int) (in X-Plane) + 29464 [0x1001a4528] + 1 veh_part_class::build_part_geo(veh_class*, int, int) (in X-Plane) + 8644 [0x100333644] 636 Thread_1455727 + 636 thread_start (in libsystem_pthread.dylib) + 13 [0x7fff63171425] + 636 _pthread_start (in libsystem_pthread.dylib) + 70 [0x7fff631752a7] + 636 _pthread_body (in libsystem_pthread.dylib) + 126 [0x7fff6317233d] + 636 THREAD_launch(void*) (in X-Plane) + 69 [0x100e04845] + 634 UTL_threadpool::thread_func(void*) (in X-Plane) + 60 [0x1006b7bfc] + ! 634 UTL_pool_task* UTL_message_queue_read<UTL_pool_task*>(UTL_message_queue<UTL_pool_task*>*, int) (in X-Plane) + 45 [0x1000e4bbd] + ! 634 UTL_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 140 [0x1000e42bc] + ! 634 UTL_platform_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 159 [0x1000e406f] + ! 634 semaphore_wait_trap (in libsystem_kernel.dylib) + 10 [0x7fff630b8c66] + 2 UTL_threadpool::thread_func(void*) (in X-Plane) + 80 [0x1006b7c10] + 2 UTL_threadpool_swarm::do_it(int) (in X-Plane) + 74 [0x1006b7b5a] + 2 fm_task::do_it(int) (in X-Plane) + 13 [0x1007ed58d] + 1 flt_class::update_with_fullsim() (in X-Plane) + 356 [0x1007f1814] + : 1 flt_class::update_otto_ai() (in X-Plane) + 1585 [0x1007f5d31] + : 1 flt_class::max_vpath_ahead(float, float, float, float*, float*) (in X-Plane) + 413 [0x1007fa47d] + : 1 atan2 (in libsystem_m.dylib) + 608 [0x7fff630e3080] + 1 flt_class::update_with_fullsim() (in X-Plane) + 389 [0x1007f1835] + 1 flt_class::update_defs(int) (in X-Plane) + 13825 [0x1001a0811] 636 Thread_1455728 + 636 thread_start (in libsystem_pthread.dylib) + 13 [0x7fff63171425] + 636 _pthread_start (in libsystem_pthread.dylib) + 70 [0x7fff631752a7] + 636 _pthread_body (in libsystem_pthread.dylib) + 126 [0x7fff6317233d] + 636 THREAD_launch(void*) (in X-Plane) + 69 [0x100e04845] + 633 UTL_threadpool::thread_func(void*) (in X-Plane) + 60 [0x1006b7bfc] + ! 633 UTL_pool_task* UTL_message_queue_read<UTL_pool_task*>(UTL_message_queue<UTL_pool_task*>*, int) (in X-Plane) + 45 [0x1000e4bbd] + ! 633 UTL_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 140 [0x1000e42bc] + ! 633 UTL_platform_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 159 [0x1000e406f] + ! 633 semaphore_wait_trap (in libsystem_kernel.dylib) + 10 [0x7fff630b8c66] + 3 UTL_threadpool::thread_func(void*) (in X-Plane) + 80 [0x1006b7c10] + 3 UTL_threadpool_swarm::do_it(int) (in X-Plane) + 74 [0x1006b7b5a] + 3 fm_task::do_it(int) (in X-Plane) + 13 [0x1007ed58d] + 1 flt_class::update_with_fullsim() (in X-Plane) + 356 [0x1007f1814] + : 1 flt_class::update_otto_ai() (in X-Plane) + 1585 [0x1007f5d31] + : 1 flt_class::max_vpath_ahead(float, float, float, float*, float*) (in X-Plane) + 413 [0x1007fa47d] + : 1 atan2 (in libsystem_m.dylib) + 651 [0x7fff630e30ab] + 1 flt_class::update_with_fullsim() (in X-Plane) + 389 [0x1007f1835] + : 1 flt_class::update_defs(int) (in X-Plane) + 29464 [0x1001a4528] + : 1 veh_part_class::build_part_geo(veh_class*, int, int) (in X-Plane) + 8084 [0x100333414] + 1 flt_class::update_with_fullsim() (in X-Plane) + 397 [0x1007f183d] + 1 flt_class::update_flight() (in X-Plane) + 68051 [0x1007b6033] + 1 tire_class::handle_contact_point(int, int, int, float, float, float, float, float, float, float, float, float, float, float, int, float, float, float, float, float, float, int, float) (in X-Plane) + 688 [0x100808050] + 1 yter_class::ret_ter_y_full(float, float, float, int, float*, float*, float*) (in X-Plane) + 901 [0x10031b185] + 1 ??? (in libsystem_m.dylib) load address 0x7fff630e0000 + 0x4bc6 [0x7fff630e4bc6] 636 Thread_1455738: com.apple.audio.IOThread.client + 636 thread_start (in libsystem_pthread.dylib) + 13 [0x7fff63171425] + 636 _pthread_start (in libsystem_pthread.dylib) + 70 [0x7fff631752a7] + 636 _pthread_body (in libsystem_pthread.dylib) + 126 [0x7fff6317233d] + 636 HALB_IOThread::Entry(void*) (in CoreAudio) + 72 [0x7fff358910d6] + 636 HALC_ProxyIOContext::IOThreadEntry(void*) (in CoreAudio) + 128 [0x7fff358915ee] + 631 HALC_ProxyIOContext::IOWorkLoop() (in CoreAudio) + 988 [0x7fff35891b84] + ! 631 HALB_MachPort::SendSimpleMessageWithSimpleReply(unsigned int, unsigned int, int, int&, bool, unsigned int) (in CoreAudio) + 45 [0x7fff3589580d] + ! 631 HALB_MachPort::SendMessageWithReply(unsigned int, unsigned int, unsigned int, unsigned int, mach_msg_header_t*, bool, unsigned int) (in CoreAudio) + 124 [0x7fff3589589a] + ! 631 mach_msg (in libsystem_kernel.dylib) + 60 [0x7fff630b9174] + ! 631 mach_msg_trap (in libsystem_kernel.dylib) + 10 [0x7fff630b8c2a] + 5 HALC_ProxyIOContext::IOWorkLoop() (in CoreAudio) + 5013 [0x7fff35892b3d] + 5 AUHAL::AUIOProc(unsigned int, AudioTimeStamp const*, AudioBufferList const*, AudioTimeStamp const*, AudioBufferList*, AudioTimeStamp const*, void*) (in CoreAudio) + 1729 [0x128c7f61] + 2 AUBase::DoRender(unsigned int&, AudioTimeStamp const&, unsigned int, unsigned int, AudioBufferList&) (in CoreAudio) + 547 [0x129e4159] + : 2 AUBase::DoRenderBus(unsigned int&, AudioTimeStamp const&, unsigned int, AUOutputElement*, unsigned int, AudioBufferList&) (in CoreAudio) + 169 [0x129e4a23] + : 2 AUConverterBase::RenderBus(unsigned int&, AudioTimeStamp const&, unsigned int, unsigned int) (in CoreAudio) + 618 [0x128c5d3c] + : 2 AUInputFormatConverter2::PullAndConvertInput(AudioTimeStamp const&, unsigned int&, AudioBufferList&, AudioStreamPacketDescription*, bool&) (in CoreAudio) + 107 [0x128c5f35] + : 2 AudioConverterFillComplexBuffer (in AudioToolbox) + 1035 [0x7fff347288c9] + : 2 BufferedAudioConverter::FillBuffer(unsigned int&, AudioBufferList&, AudioStreamPacketDescription*) (in AudioToolbox) + 364 [0x7fff34728c54] + : 2 AudioConverterChain::RenderOutput(CABufferList*, unsigned int, unsigned int&, AudioStreamPacketDescription*) (in AudioToolbox) + 106 [0x7fff34728ecc] + : 2 BufferedAudioConverter::FillBuffer(unsigned int&, AudioBufferList&, AudioStreamPacketDescription*) (in AudioToolbox) + 364 [0x7fff34728c54] + : 2 CBRConverter::RenderOutput(CABufferList*, unsigned int, unsigned int&, AudioStreamPacketDescription*) (in AudioToolbox) + 107 [0x7fff34728f7b] + : 2 BufferedAudioConverter::GetInputBytes(unsigned int, unsigned int&, CABufferList const*&) (in AudioToolbox) + 207 [0x7fff3472916f] + : 2 AudioConverterChain::FillBufferFromInputProc(unsigned int*, CABufferList*) (in AudioToolbox) + 122 [0x7fff347291fe] + : 2 AudioConverterChain::CallInputProc(unsigned int) (in AudioToolbox) + 599 [0x7fff3472954d] + : 2 AUInputFormatConverter2::InputProc(OpaqueAudioConverter*, unsigned int*, AudioBufferList*, AudioStreamPacketDescription**, void*) (in CoreAudio) + 199 [0x128c63c7] + : 2 AUInputElement::PullInput(unsigned int&, AudioTimeStamp const&, unsigned int, unsigned int) (in CoreAudio) + 227 [0x129e1acb] + : 2 AUMethodRender(void*, unsigned int*, AudioTimeStamp const*, unsigned int, unsigned int, AudioBufferList*) (in CoreAudio) + 45 [0x129ebc25] + : 2 AUBase::DoRender(unsigned int&, AudioTimeStamp const&, unsigned int, unsigned int, AudioBufferList&) (in CoreAudio) + 547 [0x129e4159] + : 2 AUBase::DoRenderBus(unsigned int&, AudioTimeStamp const&, unsigned int, AUOutputElement*, unsigned int, AudioBufferList&) (in CoreAudio) + 169 [0x129e4a23] + : 1 AUMixer3D::Render(unsigned int&, AudioTimeStamp const&, unsigned int) (in CoreAudio) + 1040 [0x128e5f8a] + : | 1 AUMixer3D::SumInput(int, bool, int, float**, float**, AudioTimeStamp const&, unsigned int) (in CoreAudio) + 376 [0x128e58d8] + : | 1 MixerSource::GetInputData(int, AudioTimeStamp const&, float*&, float*&, unsigned int, double) (in CoreAudio) + 736 [0x128e4f50] + : 1 AUMixer3D::Render(unsigned int&, AudioTimeStamp const&, unsigned int) (in CoreAudio) + 930 [0x128e5f1c] + 2 AUBase::DoRender(unsigned int&, AudioTimeStamp const&, unsigned int, unsigned int, AudioBufferList&) (in CoreAudio) + 674 [0x129e41d8] + : 2 AudioUnitGraph::GraphRenderCallback(void*, unsigned int*, AudioTimeStamp const*, unsigned int, unsigned int, AudioBufferList*) (in AudioToolbox) + 43 [0x7fff347819e1] + : 2 AudioUnitGraph::HandleRenderNotify(bool, unsigned int, unsigned int, AudioTimeStamp const*, unsigned int, void*) (in AudioToolbox) + 700 [0x7fff34782dd6] + : 2 OALContext::ContextNotificationProc(void*, unsigned int*, AudioTimeStamp const*, unsigned int, unsigned int, AudioBufferList*) (in OpenAL) + 27 [0x7fff3c2b08e1] + : 2 OALContext::DoPostRender() (in OpenAL) + 49 [0x7fff3c2b1b57] + : 1 OALContext::GetSourceForRender(unsigned int) (in OpenAL) + 46 [0x7fff3c2b060a] + : | 1 CAMutex::Try(bool&) (in OpenAL) + 60 [0x7fff3c2b441c] + : | 1 pthread_mutex_trylock (in libsystem_pthread.dylib) + 105 [0x7fff63172ec2] + : 1 OALContext::GetSourceForRender(unsigned int) (in OpenAL) + 140 [0x7fff3c2b0668] + : 1 DYLD-STUB$$pthread_equal (in OpenAL) + 0 [0x7fff3c2bf778] + 1 AUBase::DoRender(unsigned int&, AudioTimeStamp const&, unsigned int, unsigned int, AudioBufferList&) (in CoreAudio) + 500 [0x129e412a] + 1 AudioUnitGraph::GraphRenderCallback(void*, unsigned int*, AudioTimeStamp const*, unsigned int, unsigned int, AudioBufferList*) (in AudioToolbox) + 43 [0x7fff347819e1] + 1 AudioUnitGraph::HandleRenderNotify(bool, unsigned int, unsigned int, AudioTimeStamp const*, unsigned int, void*) (in AudioToolbox) + 700 [0x7fff34782dd6] + 1 OALContext::ContextNotificationProc(void*, unsigned int*, AudioTimeStamp const*, unsigned int, unsigned int, AudioBufferList*) (in OpenAL) + 49 [0x7fff3c2b08f7] + 1 OALContext::DoPreRender() (in OpenAL) + 40 [0x7fff3c2b1aea] 636 Thread_1457044 + 636 thread_start (in libsystem_pthread.dylib) + 13 [0x7fff63171425] + 636 _pthread_start (in libsystem_pthread.dylib) + 70 [0x7fff631752a7] + 636 _pthread_body (in libsystem_pthread.dylib) + 126 [0x7fff6317233d] + 636 THREAD_launch(void*) (in X-Plane) + 69 [0x100e04845] + 636 run_g1000_g430_thread(void*) (in X-Plane) + 375 [0x10090c7c7] + 636 void* UTL_message_queue_read<void*>(UTL_message_queue<void*>*, int) (in X-Plane) + 45 [0x1000d78ad] + 636 UTL_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 97 [0x1000e4291] + 636 UTL_platform_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 77 [0x1000e401d] + 636 semaphore_timedwait_trap (in libsystem_kernel.dylib) + 10 [0x7fff630b8c7e] 636 Thread_1457065 + 636 thread_start (in libsystem_pthread.dylib) + 13 [0x7fff63171425] + 636 _pthread_start (in libsystem_pthread.dylib) + 70 [0x7fff631752a7] + 636 _pthread_body (in libsystem_pthread.dylib) + 126 [0x7fff6317233d] + 636 read_thread (in X-Plane) + 263 [0x100544257] + 636 CFRunLoopRunSpecific (in CoreFoundation) + 467 [0x7fff35e51dfa] + 635 __CFRunLoopRun (in CoreFoundation) + 1661 [0x7fff35e526ca] + ! 635 __CFRunLoopServiceMachPort (in CoreFoundation) + 336 [0x7fff35e5317c] + ! 635 mach_msg (in libsystem_kernel.dylib) + 60 [0x7fff630b9174] + ! 635 mach_msg_trap (in libsystem_kernel.dylib) + 10 [0x7fff630b8c2a] + 1 __CFRunLoopRun (in CoreFoundation) + 2585 [0x7fff35e52a66] + 1 __CFRunLoopDoSource1 (in CoreFoundation) + 527 [0x7fff35e6a98d] + 1 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE1_PERFORM_FUNCTION__ (in CoreFoundation) + 41 [0x7fff35e6aa2f] + 1 __CFMachPortPerform (in CoreFoundation) + 282 [0x7fff35e6ab55] + 1 IOHIDDeviceClass::_hidReportHandlerCallback(void*, int, void*) (in IOHIDLib) + 351 [0x7f22eefd] + 1 __IOHIDDeviceInputReportWithTimeStampCallback (in IOKit) + 135 [0x7fff388de538] + 1 CFSetApplyFunction (in CoreFoundation) + 130 [0x7fff35e6a69f] + 1 CFBasicHashApply (in CoreFoundation) + 109 [0x7fff35e4d014] + 1 __CFSetApplyFunction_block_invoke (in CoreFoundation) + 18 [0x7fff35e6a6ca] + 1 __IOHIDDeviceInputReportApplier (in IOKit) + 72 [0x7fff388de635] + 1 hid_report_callback (in X-Plane) + 52 [0x100543ad4] + 1 calloc (in libsystem_malloc.dylib) + 30 [0x7fff6312fcba] + 1 malloc_zone_calloc (in libsystem_malloc.dylib) + 99 [0x7fff6312fd3a] + 1 nanov2_calloc (in libsystem_malloc.dylib) + 82 [0x7fff6313af7e] + 1 nanov2_allocate (in libsystem_malloc.dylib) + 142 [0x7fff6313a0f6] + 1 nanov2_allocate_from_block (in libsystem_malloc.dylib) + 152 [0x7fff6313a8b8] 636 Thread_1460755 636 start_wqthread (in libsystem_pthread.dylib) + 13 [0x7fff63171415] 636 _pthread_wqthread (in libsystem_pthread.dylib) + 670 [0x7fff63171721] 636 __workq_kernreturn (in libsystem_kernel.dylib) + 10 [0x7fff630ba5be] Total number in stack (recursive counted multiple, when >=5): 16 gleDoDrawDispatchCore (in GLEngine) + 629 [0x7fff40097078] 12 gldUpdateDispatch (in GeForceGLDriver) + 1233 [0x7fff30cd0bea] 10 _pthread_body (in libsystem_pthread.dylib) + 126 [0x7fff6317233d] 10 _pthread_start (in libsystem_pthread.dylib) + 70 [0x7fff631752a7] 10 glDrawElements_ACC_Exec (in GLEngine) + 246 [0x7fff400574dd] 10 thread_start (in libsystem_pthread.dylib) + 13 [0x7fff63171425] 8 THREAD_launch(void*) (in X-Plane) + 69 [0x100e04845] 7 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2032f8 [0x7fff30bcf2f8] 7 UTL_platform_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 159 [0x1000e406f] 7 UTL_pool_task* UTL_message_queue_read<UTL_pool_task*>(UTL_message_queue<UTL_pool_task*>*, int) (in X-Plane) + 45 [0x1000e4bbd] 7 UTL_semaphore_dec(UTL_semaphore*, int) (in X-Plane) + 140 [0x1000e42bc] 7 UTL_threadpool::thread_func(void*) (in X-Plane) + 60 [0x1006b7bfc] 7 mach_msg (in libsystem_kernel.dylib) + 60 [0x7fff630b9174] 7 mach_msg_trap (in libsystem_kernel.dylib) + 0 [0x7fff630b8c20] 7 semaphore_wait_trap (in libsystem_kernel.dylib) + 0 [0x7fff630b8c5c] 6 OGL_glEnd() (in X-Plane) + 90 [0x1000b216a] 6 plot_obj(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 333 [0x10025aa8d] 6 plot_obj_common(obj_mod_struct*, obj_lod_struct*, float, float, float, float, float, float, int, int, xcam_class*) (in X-Plane) + 8540 [0x10025a1bc] 5 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x2007a6 [0x7fff30bcc7a6] 5 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x328f20 [0x7fff30cf4f20] 5 ??? (in GeForceGLDriver) load address 0x7fff309cc000 + 0x676507 [0x7fff31042507] 5 OGL_sub_vbo::flush() (in X-Plane) + 308 [0x1000c42d4] 5 fm_task::do_it(int) (in X-Plane) + 13 [0x1007ed58d] 5 gldUpdateDispatch (in GeForceGLDriver) + 1163 [0x7fff30cd0ba4] Sort by top of stack, same collapsed (when >= 5): semaphore_wait_trap (in libsystem_kernel.dylib) 4440 mach_msg_trap (in libsystem_kernel.dylib) 1780 __workq_kernreturn (in libsystem_kernel.dylib) 636 semaphore_timedwait_trap (in libsystem_kernel.dylib) 636 yter_class::ret_ter_y_full(float, float, float, int, float*, float*, float*) (in X-Plane) 7 Binary Images: 0x10000 - 0x17fff +com.googlecode.google-breakpad (1.0) <D40F69E5-0F60-C476-668A-E1CB9B0DFA6F> /Users/CB/X-Plane 10/X-Plane.app/Contents/Frameworks/Breakpad.framework/Versions/A/Breakpad 0x23000 - 0x34fe7 +breakpadUtilities.dylib (1) <0B629D05-BC04-EB6D-7D62-1D108165D719> /Users/CB/X-Plane 10/X-Plane.app/Contents/Frameworks/Breakpad.framework/Resources/breakpadUtilities.dylib 0x1218b000 - 0x1218ffff com.apple.audio.AppleHDAHALPlugIn (282.10 - 282.10) <94DDF962-09E0-3B3E-B887-9A0301022190> /System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAHALPlugIn.bundle/Contents/MacOS/AppleHDAHALPlugIn 0x128b8000 - 0x12a5dff7 com.apple.audio.units.Components (1.14 - 1.14) <1EBB28B5-FB09-3967-AEA0-9883CFEF9893> /System/Library/Components/CoreAudio.component/Contents/MacOS/CoreAudio 0x7f1d4000 - 0x7f1f5ff7 +XPLM (1) <B497C673-ADC9-CC40-FCC7-57ADA1831586> /Users/CB/X-Plane 10/Resources/plugins/XPLM.framework/XPLM 0x7f20e000 - 0x7f218fff +XPWidgets (1) <D70FDCF2-B986-53CA-8E7F-5068206957BF> /Users/CB/X-Plane 10/Resources/plugins/XPWidgets.framework/XPWidgets 0x7f220000 - 0x7f225ff7 +mac.xpl (???) <99D8A359-C98D-1DE2-A234-1B2100D777BB> /Users/CB/X-Plane 10/Resources/plugins/PluginAdmin/mac.xpl 0x7f22a000 - 0x7f237ff7 com.apple.iokit.IOHIDLib (2.0.0 - 2.0.0) <E59311E0-8319-35E3-A321-C8BE77B339B2> /System/Library/Extensions/IOHIDFamily.kext/Contents/PlugIns/IOHIDLib.plugin/Contents/MacOS/IOHIDLib 0x100000000 - 0x1014bbfc7 +com.laminar_research.X-Plane (10.51r2 - 398) <8E63F209-0E6C-3009-CE1D-1EF66BA78878> /Users/CB/X-Plane 10/X-Plane.app/Contents/MacOS/X-Plane 0x10c08e000 - 0x10c10c6a7 dyld (625.13) <D6387150-2FB8-3066-868D-72E1B1C43982> /usr/lib/dyld 0x7fff2c85a000 - 0x7fff2cd7bff7 com.apple.driver.AppleIntelHD4000GraphicsGLDriver (12.0.34 - 12.0.0) <ACF2E7A1-FEF6-35DF-8758-B2BBAEF000FD> /System/Library/Extensions/AppleIntelHD4000GraphicsGLDriver.bundle/Contents/MacOS/AppleIntelHD4000GraphicsGLDriver 0x7fff2cd7c000 - 0x7fff2cdf6fff com.apple.driver.AppleIntelHD4000GraphicsMTLDriver (12.0.34 - 12.0.0) <197817A6-B115-30C3-A16C-CDE4104F9F6C> /System/Library/Extensions/AppleIntelHD4000GraphicsMTLDriver.bundle/Contents/MacOS/AppleIntelHD4000GraphicsMTLDriver 0x7fff309cc000 - 0x7fff312fdff7 com.apple.GeForceGLDriver (12.0.19 - 12.0.0) <1D2C2F5E-CD2D-3ACF-ABF4-0C119FAFFD02> /System/Library/Extensions/GeForceGLDriver.bundle/Contents/MacOS/GeForceGLDriver 0x7fff312fe000 - 0x7fff319daff7 libclh.dylib (12.0.19) <353041C6-6044-316D-A6CE-06E0B8C2486D> /System/Library/Extensions/GeForceGLDriver.bundle/Contents/MacOS/libclh.dylib 0x7fff319db000 - 0x7fff31b81ff7 com.apple.GeForceMTLDriver (12.0.19 - 12.0.0) <0A427D42-1E2D-32B1-9743-753B0FC683A6> /System/Library/Extensions/GeForceMTLDriver.bundle/Contents/MacOS/GeForceMTLDriver 0x7fff31b82000 - 0x7fff31b86fff com.apple.agl (3.3.2 - AGL-3.3.2) <81130C05-30AD-3BDA-BB9C-72ADDD5FAA2C> /System/Library/Frameworks/AGL.framework/Versions/A/AGL 0x7fff31f52000 - 0x7fff31f52fff com.apple.Accelerate (1.11 - Accelerate 1.11) <5E944326-17FE-334C-B5C4-D67841B3A37E> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate 0x7fff31f53000 - 0x7fff31f69ffb libCGInterfaces.dylib (506.19) <D164CC0F-3CB2-3B81-BE97-E6D51E573571> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.framework/Versions/A/Libraries/libCGInterfaces.dylib 0x7fff31f6a000 - 0x7fff3285efcf com.apple.vImage (8.1 - ???) <EF31BA84-AB7B-3C1E-B005-6C29257D0382> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.framework/Versions/A/vImage 0x7fff3285f000 - 0x7fff32a0afcf libBLAS.dylib (1243.200.4) <FB3590A2-37AB-353A-878B-E7468BFF1F22> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libBLAS.dylib 0x7fff32a0b000 - 0x7fff32a50fff libBNNS.dylib (38.200.5) <71968F7E-1679-314D-A7FE-C904B3165AB4> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libBNNS.dylib 0x7fff32a51000 - 0x7fff32e0afff libLAPACK.dylib (1243.200.4) <670B40E4-AE2F-3311-8ACC-E355F9A36769> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libLAPACK.dylib 0x7fff32e0b000 - 0x7fff32e20ffb libLinearAlgebra.dylib (1243.200.4) <38A569CB-514E-3376-AE9D-38CBD79DC49E> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libLinearAlgebra.dylib 0x7fff32e21000 - 0x7fff32e26ff3 libQuadrature.dylib (3.200.2) <6FFAC142-415D-3AF0-BC09-336302F11934> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libQuadrature.dylib 0x7fff32e27000 - 0x7fff32ea4ffb libSparse.dylib (79.200.5) <0D7E71A4-10D2-3979-B386-D2426ADAF6D7> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libSparse.dylib 0x7fff32ea5000 - 0x7fff32eb7ffb libSparseBLAS.dylib (1243.200.4) <E00244BC-D710-3978-B6EE-38E22882B0D9> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libSparseBLAS.dylib 0x7fff32eb8000 - 0x7fff33056fdb libvDSP.dylib (671.201.1) <DF5CA93B-2FAD-3DD0-B3A2-D5355C304841> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvDSP.dylib 0x7fff33057000 - 0x7fff331ceff3 libvMisc.dylib (671.201.1) <2F834CC8-5287-3665-B715-22F662237977> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvMisc.dylib 0x7fff331cf000 - 0x7fff331cffff com.apple.Accelerate.vecLib (3.11 - vecLib 3.11) <DA69D567-F026-3F10-BCF3-3235FC0D7AF6> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/vecLib 0x7fff33380000 - 0x7fff3419fff3 com.apple.AppKit (6.9 - 1671) <E1B2CAF1-9231-3B3D-BD9E-B770FE87F407> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit 0x7fff341f1000 - 0x7fff341f1fff com.apple.ApplicationServices (50.1 - 50.1) <1B71604B-9AC5-3A2F-8CB7-0EFA34A20F12> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/ApplicationServices 0x7fff341f2000 - 0x7fff3425dff7 com.apple.ApplicationServices.ATS (377 - 453.11) <7599E619-EE21-3EB7-875B-AE3B8D3E13BB> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ATS.framework/Versions/A/ATS 0x7fff342f6000 - 0x7fff34415fff libFontParser.dylib (228.6) <E800074F-62CF-340A-A5A7-B8BE5B560045> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ATS.framework/Versions/A/Resources/libFontParser.dylib 0x7fff34416000 - 0x7fff34461fff libFontRegistry.dylib (228.12) <480D472D-C8FB-321D-86EC-2EA6927A97AD> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ATS.framework/Versions/A/Resources/libFontRegistry.dylib 0x7fff344c0000 - 0x7fff344f3ff7 libTrueTypeScaler.dylib (228.6) <D23BFDE4-8664-335A-B43B-A13A8EF29E40> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ATS.framework/Versions/A/Resources/libTrueTypeScaler.dylib 0x7fff3455d000 - 0x7fff34561ff3 com.apple.ColorSyncLegacy (4.13.0 - 1) <90641B6B-D07B-3577-B594-965825544B60> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ColorSyncLegacy.framework/Versions/A/ColorSyncLegacy 0x7fff345fe000 - 0x7fff34650ff3 com.apple.HIServices (1.22 - 627.14.2) <01F309D6-32E7-3C4F-A38B-8206EE3076CC> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/HIServices.framework/Versions/A/HIServices 0x7fff34651000 - 0x7fff3465fff3 com.apple.LangAnalysis (1.7.0 - 1.7.0) <67BC5855-B7A3-39E6-B5DD-52B287EB1532> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LangAnalysis.framework/Versions/A/LangAnalysis 0x7fff34660000 - 0x7fff346acfff com.apple.print.framework.PrintCore (14.0 - 503.7) <C13BC56A-65F4-35B1-9E33-51FE6F3B06FD> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/PrintCore.framework/Versions/A/PrintCore 0x7fff346ad000 - 0x7fff346e8ff7 com.apple.QD (3.12 - 407.2) <94A30038-C545-327A-B1C0-E19C79D62BAB> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/QD.framework/Versions/A/QD 0x7fff346e9000 - 0x7fff346f5ff7 com.apple.speech.synthesis.framework (8.0.15 - 8.0.15) <A96C744B-B1AD-32E3-BA72-7A221684BE3F> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/SpeechSynthesis.framework/Versions/A/SpeechSynthesis 0x7fff346f6000 - 0x7fff34992ff7 com.apple.audio.toolbox.AudioToolbox (1.14 - 1.14) <89D2529D-CF36-3081-A700-70892F888718> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox 0x7fff34994000 - 0x7fff34994fff com.apple.audio.units.AudioUnit (1.14 - 1.14) <8B9A5ADB-E62C-3838-BB5E-AF20CAE449CC> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit 0x7fff34cf8000 - 0x7fff350b9ff7 com.apple.CFNetwork (974.1 - 974.1) <ACC604FA-5D40-34CE-9206-8091010306B7> /System/Library/Frameworks/CFNetwork.framework/Versions/A/CFNetwork 0x7fff350ce000 - 0x7fff350cefff com.apple.Carbon (158 - 158) <DAF95685-B793-34EB-96EA-3E292A9E3378> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon 0x7fff350cf000 - 0x7fff350d2ffb com.apple.CommonPanels (1.2.6 - 98) <F1E1C47B-FD1A-30A4-B41B-87BD8B178B56> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels.framework/Versions/A/CommonPanels 0x7fff350d3000 - 0x7fff353daff7 com.apple.HIToolbox (2.1.1 - 916.32) <B2ED8B1C-FC3E-3FA0-8F6D-E7A448E6FAA7> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.framework/Versions/A/HIToolbox 0x7fff353db000 - 0x7fff353deffb com.apple.help (1.3.8 - 66) <4392A63F-9B58-3248-BF73-B46AD3744E6E> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framework/Versions/A/Help 0x7fff353df000 - 0x7fff353e4ff7 com.apple.ImageCapture (9.0 - 1529.7) <364EDC6B-6374-31A7-A637-0044B73F8DBF> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture.framework/Versions/A/ImageCapture 0x7fff353e5000 - 0x7fff35479ff3 com.apple.ink.framework (10.9 - 225) <D6503F37-7EBC-32C1-95CC-A35EFC54E7ED> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework/Versions/A/Ink 0x7fff3547a000 - 0x7fff35494fff com.apple.openscripting (1.7 - 178) <D4A4D130-9C7B-3656-9D58-50F9D09C276E> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting.framework/Versions/A/OpenScripting 0x7fff354b5000 - 0x7fff354b6fff com.apple.print.framework.Print (14.0 - 267.3) <5CD250DF-98AD-30B8-A5D5-47634FF9E74D> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/A/Print 0x7fff354b7000 - 0x7fff354b9ff7 com.apple.securityhi (9.0 - 55006) <C5308CBC-6736-31A7-905B-C635C6D43FDE> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.framework/Versions/A/SecurityHI 0x7fff354ba000 - 0x7fff354c0ff7 com.apple.speech.recognition.framework (6.0.3 - 6.0.3) <1C38B9CB-DD45-3A7B-9D4C-631855A4EE32> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecognition.framework/Versions/A/SpeechRecognition 0x7fff355e7000 - 0x7fff355e7fff com.apple.Cocoa (6.11 - 23) <A520D2A3-032B-3C06-81E1-EFDD97C47ACE> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa 0x7fff355f5000 - 0x7fff356c1fff com.apple.ColorSync (4.13.0 - 3340) <0618DA46-5A5E-339D-BB2F-ED66A2BFCCF9> /System/Library/Frameworks/ColorSync.framework/Versions/A/ColorSync 0x7fff3585c000 - 0x7fff358ecfff com.apple.audio.CoreAudio (4.3.0 - 4.3.0) <5845D43B-BBB5-343B-A164-6F9E2C53CFA3> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio 0x7fff35952000 - 0x7fff3597dff7 com.apple.CoreBluetooth (1.0 - 1) <D2F48E3D-79FC-32D7-B281-658EAD2CC50B> /System/Library/Frameworks/CoreBluetooth.framework/Versions/A/CoreBluetooth 0x7fff3597e000 - 0x7fff35d2cffb com.apple.CoreData (120 - 865.2) <997F4DBF-0D4D-34EA-96CF-9E876ADE6C4F> /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData 0x7fff35d2d000 - 0x7fff35e16fff com.apple.CoreDisplay (101.3 - 101.17.6) <4AE5C221-B8E1-3A4F-91E0-96ED5926E82B> /System/Library/Frameworks/CoreDisplay.framework/Versions/A/CoreDisplay 0x7fff35e17000 - 0x7fff36267fff com.apple.CoreFoundation (6.9 - 1555.10) <22E6D6EE-A044-3B5B-9A1E-2509732D7705> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation 0x7fff36269000 - 0x7fff36913ff7 com.apple.CoreGraphics (2.0 - 1245.8.4.8) <109455A8-6E85-3444-8D32-30432DAE3354> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics 0x7fff36915000 - 0x7fff36c3aff7 com.apple.CoreImage (14.0.0 - 700.2.220) <E9E7B27C-C4FD-3AD6-923E-DF7EAE36D1FF> /System/Library/Frameworks/CoreImage.framework/Versions/A/CoreImage 0x7fff370f1000 - 0x7fff370f1fff com.apple.CoreServices (933 - 933) <B79C910E-93B9-3686-8E72-E0B63083AAE5> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices 0x7fff370f2000 - 0x7fff37170ffb com.apple.AE (768 - 768) <E795749D-CE50-3B8C-91A7-8C2618887288> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.framework/Versions/A/AE 0x7fff37171000 - 0x7fff37449ff7 com.apple.CoreServices.CarbonCore (1178.11 - 1178.11) <9FBE7BFB-3A81-37AC-8E15-E6F7932BBDC0> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore 0x7fff3744a000 - 0x7fff37494ff7 com.apple.DictionaryServices (1.2 - 284.16.3) <D9388630-E7F2-321E-81FF-EBD5F3B47A52> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/DictionaryServices.framework/Versions/A/DictionaryServices 0x7fff37495000 - 0x7fff3749dffb com.apple.CoreServices.FSEvents (1239.200.12 - 1239.200.12) <E40A3C4A-79C7-37D8-999B-D1169A06870B> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/FSEvents.framework/Versions/A/FSEvents 0x7fff3749e000 - 0x7fff37669ff7 com.apple.LaunchServices (933 - 933) <4614A4B4-C358-3460-9FA7-DF8D6C466806> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/LaunchServices 0x7fff3766a000 - 0x7fff3770cffb com.apple.Metadata (10.7.0 - 1191.51) <6B9CCA98-6F68-3908-A7A9-96D3E2AE5968> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadata.framework/Versions/A/Metadata 0x7fff3770d000 - 0x7fff37758ff7 com.apple.CoreServices.OSServices (933 - 933) <A92C846F-872D-3534-B60E-6CD445A9BAEE> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServices.framework/Versions/A/OSServices 0x7fff37759000 - 0x7fff377c7ff7 com.apple.SearchKit (1.4.0 - 1.4.0) <C6A34D09-9707-3F28-838F-63B59B8A12D5> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchKit.framework/Versions/A/SearchKit 0x7fff377c8000 - 0x7fff377ecffb com.apple.coreservices.SharedFileList (71.27 - 71.27) <B46A15E0-4C10-3616-BE49-58E07EC463FE> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SharedFileList.framework/Versions/A/SharedFileList 0x7fff37b2f000 - 0x7fff37c94fff com.apple.CoreText (352.0 - 584.24) <5B55B533-F4DE-32CE-8739-16FFFA1A64F8> /System/Library/Frameworks/CoreText.framework/Versions/A/CoreText 0x7fff37c95000 - 0x7fff37cd2fff com.apple.CoreVideo (1.8 - 0.0) <C7BB7D0F-3AF2-3046-A387-A802BCA52A3A> /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo 0x7fff37cd3000 - 0x7fff37d69ffb com.apple.framework.CoreWLAN (13.0 - 1370.8) <19E41424-B956-34DF-AE02-9822308FA3DC> /System/Library/Frameworks/CoreWLAN.framework/Versions/A/CoreWLAN 0x7fff37ef9000 - 0x7fff37f04ffb com.apple.DirectoryService.Framework (10.14 - 207.200.4) <222097B7-D721-3F27-9798-ACC95E73F233> /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryService 0x7fff37f05000 - 0x7fff37fbfff7 com.apple.DiscRecording (9.0.3 - 9030.4.5) <55E40DE0-500B-3AC4-81BA-4A54BC04740C> /System/Library/Frameworks/DiscRecording.framework/Versions/A/DiscRecording 0x7fff37fe6000 - 0x7fff37febfff com.apple.DiskArbitration (2.7 - 2.7) <C53C1905-9BCF-3AE8-8BB3-C8A2C7DB7D25> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration 0x7fff381b1000 - 0x7fff381b3ff7 com.apple.ForceFeedback (1.0.6 - 1.0.6) <22BA6B79-20C5-331F-BEBA-D22BD829CBBE> /System/Library/Frameworks/ForceFeedback.framework/Versions/A/ForceFeedback 0x7fff381b4000 - 0x7fff38582fff com.apple.Foundation (6.9 - 1555.10) <0CCAF9AF-F7AF-3174-98D4-6C188B1079CC> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation 0x7fff385f3000 - 0x7fff38623ff3 com.apple.GSS (4.0 - 2.0) <74ACB1A1-A5A4-3180-AC00-688C94AA4434> /System/Library/Frameworks/GSS.framework/Versions/A/GSS 0x7fff3873c000 - 0x7fff38845ff3 com.apple.Bluetooth (6.0.8 - 6.0.8f6) <6CB8A08E-1154-3333-83CC-2A939AC94562> /System/Library/Frameworks/IOBluetooth.framework/Versions/A/IOBluetooth 0x7fff388a7000 - 0x7fff38938fff com.apple.framework.IOKit (2.0.2 - 1483.201.1) <DA4ED91F-2CC9-3CFD-9200-9D5D31EEE4F3> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit 0x7fff3893a000 - 0x7fff38944ff7 com.apple.IOSurface (255.1 - 255.1) <538F0257-A408-36AF-AB1E-1D7037D6359E> /System/Library/Frameworks/IOSurface.framework/Versions/A/IOSurface 0x7fff3899b000 - 0x7fff38b32fff com.apple.ImageIO.framework (3.3.0 - 1796.5.4.1) <279FA8E2-39BF-3C89-A564-F281BC4B80D0> /System/Library/Frameworks/ImageIO.framework/Versions/A/ImageIO 0x7fff38b33000 - 0x7fff38b37ffb libGIF.dylib (1796.5.4.1) <461E003B-28B3-3810-9D20-4E0D2CC1001F> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libGIF.dylib 0x7fff38b38000 - 0x7fff38c1dfff libJP2.dylib (1796.5.4.1) <0EBA0A9E-CE59-3894-864A-838C3EE5D285> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libJP2.dylib 0x7fff38c1e000 - 0x7fff38c43ffb libJPEG.dylib (1796.5.4.1) <1DFB2EC8-D8CA-327C-B817-7756A52622BB> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libJPEG.dylib 0x7fff38f17000 - 0x7fff38f3dff3 libPng.dylib (1796.5.4.1) <6F90D249-1AB2-37DF-BEA6-DBC943F71CB5> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libPng.dylib 0x7fff38f3e000 - 0x7fff38f40ff7 libRadiance.dylib (1796.5.4.1) <57F10F14-4758-31F3-9BCC-721967DF4661> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libRadiance.dylib 0x7fff38f41000 - 0x7fff38f8efff libTIFF.dylib (1796.5.4.1) <7687D89F-D87F-3C0C-AF55-B439423DD579> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libTIFF.dylib 0x7fff3a024000 - 0x7fff3a03dfff com.apple.Kerberos (3.0 - 1) <8BE3D524-257D-3663-A937-F1AC76BDF4D9> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos 0x7fff3a03e000 - 0x7fff3a073ffb com.apple.LDAPFramework (2.4.28 - 194.5) <DC361FB9-4B59-311E-8CC5-07FF9A9C673F> /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP 0x7fff3aa5c000 - 0x7fff3aaeffff com.apple.Metal (157.55 - 157.55) <49CD402F-20CB-3930-B997-BBDC495ABF64> /System/Library/Frameworks/Metal.framework/Versions/A/Metal 0x7fff3ab0c000 - 0x7fff3ab2cff7 com.apple.MetalPerformanceShaders.MPSCore (1.0 - 1) <9A841A76-43BC-3220-A4DA-99137C42A0BC> /System/Library/Frameworks/MetalPerformanceShaders.framework/Frameworks/MPSCore.framework/Versions/A/MPSCore 0x7fff3ab2d000 - 0x7fff3abaafef com.apple.MetalPerformanceShaders.MPSImage (1.0 - 1) <C469D1E5-F621-3E56-87AC-1BD889664FA3> /System/Library/Frameworks/MetalPerformanceShaders.framework/Frameworks/MPSImage.framework/Versions/A/MPSImage 0x7fff3abab000 - 0x7fff3abd3fff com.apple.MetalPerformanceShaders.MPSMatrix (1.0 - 1) <8C57A3A2-8EBB-3401-87FC-368D1BE6DAAC> /System/Library/Frameworks/MetalPerformanceShaders.framework/Frameworks/MPSMatrix.framework/Versions/A/MPSMatrix 0x7fff3abd4000 - 0x7fff3acfbff7 com.apple.MetalPerformanceShaders.MPSNeuralNetwork (1.0 - 1) <CE3201A3-4ACE-3E79-990B-8987C576B31B> /System/Library/Frameworks/MetalPerformanceShaders.framework/Frameworks/MPSNeuralNetwork.framework/Versions/A/MPSNeuralNetwork 0x7fff3acfc000 - 0x7fff3ad17ff7 com.apple.MetalPerformanceShaders.MPSRayIntersector (1.0 - 1) <8F02CFCA-41E1-3194-915F-3106E8B48B32> /System/Library/Frameworks/MetalPerformanceShaders.framework/Frameworks/MPSRayIntersector.framework/Versions/A/MPSRayIntersector 0x7fff3ad18000 - 0x7fff3ad18ff7 com.apple.MetalPerformanceShaders.MetalPerformanceShaders (1.0 - 1) <8B715D78-8357-38F4-A03C-926EE967CE71> /System/Library/Frameworks/MetalPerformanceShaders.framework/Versions/A/MetalPerformanceShaders 0x7fff3bf17000 - 0x7fff3bf23ffb com.apple.NetFS (6.0 - 4.0) <529E29A9-5E77-3A8C-A982-CF55F949FE5D> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS 0x7fff3c2a2000 - 0x7fff3c2c7ff7 com.apple.audio.OpenAL (1.8 - 1.8) <69CA8E49-D0BF-3153-88FB-3A6BCE8D14B7> /System/Library/Frameworks/OpenAL.framework/Versions/A/OpenAL 0x7fff3e9da000 - 0x7fff3e9e2fe7 libcldcpuengine.dylib (2.9.6) <48AB98D8-1098-3B1D-8AFD-17B40F7A2F5D> /System/Library/Frameworks/OpenCL.framework/Versions/A/Libraries/libcldcpuengine.dylib 0x7fff3e9e3000 - 0x7fff3ea3cff7 com.apple.opencl (2.12.1 - 2.12.1) <3EAE5BC8-E948-3926-9319-9DAC2A8B5484> /System/Library/Frameworks/OpenCL.framework/Versions/A/OpenCL 0x7fff3ea3d000 - 0x7fff3ea59ff7 com.apple.CFOpenDirectory (10.14 - 207.200.4) <7E4EFF02-2596-31E6-88DE-29C89E2837E4> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpenDirectory.framework/Versions/A/CFOpenDirectory 0x7fff3ea5a000 - 0x7fff3ea66ffb com.apple.OpenDirectory (10.14 - 207.200.4) <52A3918E-0F7A-33FD-87EE-21A37B37D13B> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/OpenDirectory 0x7fff3f3c9000 - 0x7fff3f3cbfff libCVMSPluginSupport.dylib (17.0.37) <38A18A32-BBF2-3A0F-AE37-51734B6CA91A> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCVMSPluginSupport.dylib 0x7fff3f3cc000 - 0x7fff3f3d1ff3 libCoreFSCache.dylib (163.20) <BF8F04DD-C1A1-3D2A-BF3F-639FE907E28D> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreFSCache.dylib 0x7fff3f3d2000 - 0x7fff3f3d6fff libCoreVMClient.dylib (163.20) <45A2C724-F3D1-316A-9A41-CAB8E2A390EC> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreVMClient.dylib 0x7fff3f3d7000 - 0x7fff3f3dfffb libGFXShared.dylib (17.0.37) <267B40DF-2939-3D76-89FA-E8DBDEE96D92> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGFXShared.dylib 0x7fff3f3e0000 - 0x7fff3f3ebfff libGL.dylib (17.0.37) <2E25A83B-B560-34A1-B474-3027C8B75BA4> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib 0x7fff3f3ec000 - 0x7fff3f426fef libGLImage.dylib (17.0.37) <49C5F799-66E5-3A81-AF88-948DD0E583FA> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dylib 0x7fff3f427000 - 0x7fff3f599ff3 libGLProgrammability.dylib (17.0.37) <8A5E29FF-04DA-33D4-9F5F-B896CC967386> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgrammability.dylib 0x7fff3f59a000 - 0x7fff3f5d7fff libGLU.dylib (17.0.37) <79555E42-B816-3106-8FA0-FC14A54AE8B3> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib 0x7fff3ff87000 - 0x7fff3ff96ff3 com.apple.opengl (17.0.37 - 17.0.37) <FA76EAA6-D035-3444-87F5-DD95446D651D> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL 0x7fff3ff97000 - 0x7fff4012dff7 GLEngine (17.0.37) <0A43977A-AA0D-3B05-AC7E-C7A8BFB3B449> /System/Library/Frameworks/OpenGL.framework/Versions/A/Resources/GLEngine.bundle/GLEngine 0x7fff4012e000 - 0x7fff40156ff7 GLRendererFloat (17.0.37) <F7461A91-0F80-336E-9CC5-9A777A454D28> /System/Library/Frameworks/OpenGL.framework/Versions/A/Resources/GLRendererFloat.bundle/GLRendererFloat 0x7fff40df2000 - 0x7fff41048fff com.apple.QuartzCore (1.11 - 693.16.4.2) <2C9E3279-3F97-3440-B937-E5FE888232E2> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore 0x7fff41896000 - 0x7fff41bbcfff com.apple.security (7.0 - 58286.200.222) <AEB638D9-BFE9-319E-A70B-557ACF41117A> /System/Library/Frameworks/Security.framework/Versions/A/Security 0x7fff41bbd000 - 0x7fff41c4cfff com.apple.securityfoundation (6.0 - 55185.200.14) <770D67D1-3DA6-3FD3-8531-376712BA4F60> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoundation 0x7fff41c7e000 - 0x7fff41c82ff3 com.apple.xpc.ServiceManagement (1.0 - 1) <20DB899D-3BAF-36FD-86A6-F66A82074607> /System/Library/Frameworks/ServiceManagement.framework/Versions/A/ServiceManagement 0x7fff4203f000 - 0x7fff420afff3 com.apple.SystemConfiguration (1.17 - 1.17) <EED5BC9B-CE8D-343C-BCDC-04A79F704828> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfiguration 0x7fff45314000 - 0x7fff453b9ff7 com.apple.APFS (1.0 - 1) <CBE5EE83-7A5F-3C10-93FF-F6DA84DFB875> /System/Library/PrivateFrameworks/APFS.framework/Versions/A/APFS 0x7fff45df5000 - 0x7fff45df6ff3 com.apple.AggregateDictionary (1.0 - 1) <1DEBBE36-8945-3AD8-BD48-2850AD845711> /System/Library/PrivateFrameworks/AggregateDictionary.framework/Versions/A/AggregateDictionary 0x7fff462ec000 - 0x7fff46308ff7 com.apple.AppContainer (4.0 - 360.200.31) <1A86C83E-1FCA-3418-ACBE-07A2A1711920> /System/Library/PrivateFrameworks/AppContainer.framework/Versions/A/AppContainer 0x7fff46309000 - 0x7fff46316ff7 com.apple.AppSandbox (4.0 - 360.200.31) <3DE86891-CEA4-373B-B2B5-F6EF8D86D522> /System/Library/PrivateFrameworks/AppSandbox.framework/Versions/A/AppSandbox 0x7fff463f1000 - 0x7fff4641dff7 com.apple.framework.Apple80211 (13.0 - 1375.14) <79EBF155-EAB2-37EE-BF8C-57BC453217B1> /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211 0x7fff466f9000 - 0x7fff46708fcf com.apple.AppleFSCompression (96.200.3 - 1.0) <E093776E-C367-3CCF-BFD5-623476A89E9A> /System/Library/PrivateFrameworks/AppleFSCompression.framework/Versions/A/AppleFSCompression 0x7fff46806000 - 0x7fff46811fff com.apple.AppleIDAuthSupport (1.0 - 1) <5362D9AD-A2AE-3436-97CE-C353124504E5> /System/Library/PrivateFrameworks/AppleIDAuthSupport.framework/Versions/A/AppleIDAuthSupport 0x7fff46852000 - 0x7fff4689bff3 com.apple.AppleJPEG (1.0 - 1) <9A690E6E-F987-3660-BED6-B1A4D1906B6C> /System/Library/PrivateFrameworks/AppleJPEG.framework/Versions/A/AppleJPEG 0x7fff46ae6000 - 0x7fff46aeaff7 com.apple.AppleSRP (5.0 - 1) <B8E2BEC9-FAFB-3E26-BF26-E2E58C545006> /System/Library/PrivateFrameworks/AppleSRP.framework/Versions/A/AppleSRP 0x7fff46aeb000 - 0x7fff46b13ff7 com.apple.applesauce (1.0 - ???) <60BB16D6-DE7E-356A-B9DE-F73EE179934A> /System/Library/PrivateFrameworks/AppleSauce.framework/Versions/A/AppleSauce 0x7fff46c79000 - 0x7fff46c8fffb com.apple.AssertionServices (1.0 - 1) <8FB0D908-6C46-3399-92D6-4E7D4B5F4F19> /System/Library/PrivateFrameworks/AssertionServices.framework/Versions/A/AssertionServices 0x7fff46fbf000 - 0x7fff47262ffb com.apple.AuthKit (1.0 - 1) <ED375339-69F6-34AE-825D-F16BF0618E3E> /System/Library/PrivateFrameworks/AuthKit.framework/Versions/A/AuthKit 0x7fff47433000 - 0x7fff4743cff3 com.apple.coreservices.BackgroundTaskManagement (1.0 - 57.1) <972F41B3-7DF7-3BF1-ACCA-A093A4328ADF> /System/Library/PrivateFrameworks/BackgroundTaskManagement.framework/Versions/A/BackgroundTaskManagement 0x7fff4743d000 - 0x7fff474dfff7 com.apple.backup.framework (1.10 - ???) <46534B04-DD0E-357B-9CB5-F88AAC6AF4ED> /System/Library/PrivateFrameworks/Backup.framework/Versions/A/Backup 0x7fff474e0000 - 0x7fff47551ffb com.apple.BaseBoard (360.18.4 - 360.18.4) <709EF03C-5BCE-3F47-BD58-A48C1F9378A5> /System/Library/PrivateFrameworks/BaseBoard.framework/Versions/A/BaseBoard 0x7fff490f3000 - 0x7fff490fffff com.apple.CommerceCore (1.0 - 708.0.78) <98B0DA78-EFDF-32E6-851C-1F00F2C7406E> /System/Library/PrivateFrameworks/CommerceKit.framework/Versions/A/Frameworks/CommerceCore.framework/Versions/A/CommerceCore 0x7fff49100000 - 0x7fff49109fff com.apple.CommonAuth (4.0 - 2.0) <7105F266-35C3-3582-9383-A2A9D7184A7B> /System/Library/PrivateFrameworks/CommonAuth.framework/Versions/A/CommonAuth 0x7fff49bef000 - 0x7fff49bf8fff com.apple.frameworks.CoreDaemon (1.3 - 1.3) <8D971ACD-6A26-30A9-9C5B-BCBF60A661F1> /System/Library/PrivateFrameworks/CoreDaemon.framework/Versions/B/CoreDaemon 0x7fff49e06000 - 0x7fff49e19fff com.apple.CoreEmoji (1.0 - 69.15.9) <011E7853-BDD6-3197-BA8D-D6B977EF56EB> /System/Library/PrivateFrameworks/CoreEmoji.framework/Versions/A/CoreEmoji 0x7fff4a3ef000 - 0x7fff4a461ff7 com.apple.CoreNLP (1.0 - 130.15.22) <401F5284-A984-32A1-A547-CC8156381070> /System/Library/PrivateFrameworks/CoreNLP.framework/Versions/A/CoreNLP 0x7fff4a71c000 - 0x7fff4a724ffb com.apple.CorePhoneNumbers (1.0 - 1) <F47CA56F-6760-3282-BFD8-C8C8D2C33ECF> /System/Library/PrivateFrameworks/CorePhoneNumbers.framework/Versions/A/CorePhoneNumbers 0x7fff4a8b3000 - 0x7fff4a8e4fff com.apple.CoreServicesInternal (357 - 357) <2D012EB3-83BF-3E51-A2BE-41AF26F2DDF0> /System/Library/PrivateFrameworks/CoreServicesInternal.framework/Versions/A/CoreServicesInternal 0x7fff4aca9000 - 0x7fff4ad37ff7 com.apple.CoreSymbolication (10.0 - 64235.3.1) <912C63C0-473B-3352-A255-60F7CA3FE3F2> /System/Library/PrivateFrameworks/CoreSymbolication.framework/Versions/A/CoreSymbolication 0x7fff4adc7000 - 0x7fff4aef3fff com.apple.coreui (2.1 - 498.46) <05F9736C-5A62-33B3-9607-551A332AEF28> /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI 0x7fff4aef4000 - 0x7fff4b073ffb com.apple.CoreUtils (5.7 - 570.70) <2554BA12-16A2-399F-A13A-E5C8EB4FC1EC> /System/Library/PrivateFrameworks/CoreUtils.framework/Versions/A/CoreUtils 0x7fff4b0ca000 - 0x7fff4b12dffb com.apple.framework.CoreWiFi (13.0 - 1370.8) <5C6ACF32-14D3-35FD-8A4A-629521090F41> /System/Library/PrivateFrameworks/CoreWiFi.framework/Versions/A/CoreWiFi 0x7fff4b12e000 - 0x7fff4b13fffb com.apple.CrashReporterSupport (10.13 - 938.23) <36754BB2-680F-36AE-A5DE-548B4F41F0AE> /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Versions/A/CrashReporterSupport 0x7fff4b1c2000 - 0x7fff4b1d1ff3 com.apple.framework.DFRFoundation (1.0 - 210) <61EF0583-E946-3201-932D-7D117BC62CB2> /System/Library/PrivateFrameworks/DFRFoundation.framework/Versions/A/DFRFoundation 0x7fff4b1d2000 - 0x7fff4b1d6ff7 com.apple.DSExternalDisplay (3.1 - 380) <B6B26BB3-2DC9-34D0-817E-EB612432EC96> /System/Library/PrivateFrameworks/DSExternalDisplay.framework/Versions/A/DSExternalDisplay 0x7fff4b259000 - 0x7fff4b2d0ffb com.apple.datadetectorscore (7.0 - 590.24) <2D4CFF51-BCD4-3D08-AE73-AB2B8BEC8659> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDetectorsCore 0x7fff4b31e000 - 0x7fff4b35ffff com.apple.DebugSymbols (185 - 185) <01F561DA-4724-32FD-B2C7-6436F4CEB980> /System/Library/PrivateFrameworks/DebugSymbols.framework/Versions/A/DebugSymbols 0x7fff4b360000 - 0x7fff4b4b9ff7 com.apple.desktopservices (1.13 - ???) <053D3A96-9263-3242-8625-101DDB9350DE> /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/DesktopServicesPriv 0x7fff4b5eb000 - 0x7fff4b6bdff7 com.apple.DiskImagesFramework (480.201.1 - 480.201.1) <54D2F7DC-DAA6-3667-9590-1407C7B738EC> /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages 0x7fff4b6be000 - 0x7fff4b782fff com.apple.DiskManagement (12.0 - 1530) <F844A618-613A-3609-9C31-621D92FB75DD> /System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/DiskManagement 0x7fff4b828000 - 0x7fff4b82bfff com.apple.EFILogin (2.0 - 2) <8FCA68D2-CEA5-39F6-B222-AC31FCF79D1D> /System/Library/PrivateFrameworks/EFILogin.framework/Versions/A/EFILogin 0x7fff4c4fd000 - 0x7fff4c925fff com.apple.vision.FaceCore (3.3.4 - 3.3.4) <CCBC466A-1AD4-3B0B-80B2-D6CFCBB37FC0> /System/Library/PrivateFrameworks/FaceCore.framework/Versions/A/FaceCore 0x7fff4c92f000 - 0x7fff4c951ff7 com.apple.framework.familycontrols (4.1 - 410) <5C0ECAF5-4DDC-38BC-8876-8B7EBC4A5C72> /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyControls 0x7fff50247000 - 0x7fff50248fff libmetal_timestamp.dylib (902.1.49) <F0C95234-16BA-3F0B-A11E-087ABDC8DD6C> /System/Library/PrivateFrameworks/GPUCompiler.framework/Versions/3902/Libraries/libmetal_timestamp.dylib 0x7fff518e1000 - 0x7fff518ecff7 libGPUSupportMercury.dylib (17.0.37) <E8A195F4-E2E4-3EB5-AF21-856EBA145436> /System/Library/PrivateFrameworks/GPUSupport.framework/Versions/A/Libraries/libGPUSupportMercury.dylib 0x7fff518ed000 - 0x7fff518f2ff7 com.apple.GPUWrangler (3.22.9 - 3.22.9) <A7FF28DC-3576-3E53-AFAF-0E29CB45E9AE> /System/Library/PrivateFrameworks/GPUWrangler.framework/Versions/A/GPUWrangler 0x7fff52751000 - 0x7fff52760fff com.apple.GraphVisualizer (1.0 - 5) <C7040CD7-6CAB-3878-B29E-21F1665341D0> /System/Library/PrivateFrameworks/GraphVisualizer.framework/Versions/A/GraphVisualizer 0x7fff52847000 - 0x7fff528bbfff com.apple.Heimdal (4.0 - 2.0) <793E1D31-6166-37F2-A989-F98FE1706E5D> /System/Library/PrivateFrameworks/Heimdal.framework/Versions/A/Heimdal 0x7fff53c97000 - 0x7fff53c9effb com.apple.IOAccelerator (400.24 - 400.24) <01551ED8-6AE1-307D-A3F0-DCA85FAA5210> /System/Library/PrivateFrameworks/IOAccelerator.framework/Versions/A/IOAccelerator 0x7fff53ca2000 - 0x7fff53cbbff7 com.apple.IOPresentment (1.0 - 37) <751130A1-8639-3BDA-BF8F-A3BE54427E43> /System/Library/PrivateFrameworks/IOPresentment.framework/Versions/A/IOPresentment 0x7fff540ce000 - 0x7fff540fdff7 com.apple.IconServices (379 - 379) <BE9E71B4-C00E-317D-9093-6E637C905A09> /System/Library/PrivateFrameworks/IconServices.framework/Versions/A/IconServices 0x7fff5439c000 - 0x7fff543affff com.apple.security.KeychainCircle.KeychainCircle (1.0 - 1) <10A17A9D-564E-3841-A433-D6D7401ED733> /System/Library/PrivateFrameworks/KeychainCircle.framework/Versions/A/KeychainCircle 0x7fff543ca000 - 0x7fff544c1fff com.apple.LanguageModeling (1.0 - 159.15.15) <E524CC46-42C7-3046-AD6C-5D5D768EA478> /System/Library/PrivateFrameworks/LanguageModeling.framework/Versions/A/LanguageModeling 0x7fff544c2000 - 0x7fff54503ff7 com.apple.Lexicon-framework (1.0 - 33.15.10) <90C1CFE1-9935-3F4F-8A9B-1DD697F2FF3D> /System/Library/PrivateFrameworks/Lexicon.framework/Versions/A/Lexicon 0x7fff5450a000 - 0x7fff54510ff7 com.apple.LinguisticData (1.0 - 238.15.29) <D27B30BA-3F5D-3AF2-895C-3B64569EEA1B> /System/Library/PrivateFrameworks/LinguisticData.framework/Versions/A/LinguisticData 0x7fff54609000 - 0x7fff5460effb com.apple.LoginUICore (4.0 - 4.0) <991F8731-8845-383F-890C-4CE1BEFE937A> /System/Library/PrivateFrameworks/LoginUIKit.framework/Versions/A/Frameworks/LoginUICore.framework/Versions/A/LoginUICore 0x7fff54e8e000 - 0x7fff54ec1ff3 com.apple.MediaKit (16 - 906) <15D4EDA2-AAAC-3CF3-BB2B-3A92AECC932D> /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit 0x7fff5526a000 - 0x7fff55292ffb com.apple.spotlight.metadata.utilities (1.0 - 1191.51) <7CD28A81-F0D6-3575-8F83-3D45D53F72BB> /System/Library/PrivateFrameworks/MetadataUtilities.framework/Versions/A/MetadataUtilities 0x7fff55293000 - 0x7fff55325fff com.apple.gpusw.MetalTools (1.0 - 1) <60BE7793-D8DE-3DF1-94D7-503301EC1E72> /System/Library/PrivateFrameworks/MetalTools.framework/Versions/A/MetalTools 0x7fff554cf000 - 0x7fff554eafff com.apple.MobileKeyBag (2.0 - 1.0) <E9F2FF73-22D0-35B5-BD2C-9DD8FDB12BCC> /System/Library/PrivateFrameworks/MobileKeyBag.framework/Versions/A/MobileKeyBag 0x7fff55578000 - 0x7fff555a2ff7 com.apple.MultitouchSupport.framework (2400.15 - 2400.15) <A2BB198C-0B1A-3988-8611-9A9BCCE650B5> /System/Library/PrivateFrameworks/MultitouchSupport.framework/Versions/A/MultitouchSupport 0x7fff55814000 - 0x7fff5581efff com.apple.NetAuth (6.2 - 6.2) <55DC741A-A01A-380C-B2D3-244241DA1F2C> /System/Library/PrivateFrameworks/NetAuth.framework/Versions/A/NetAuth 0x7fff560e9000 - 0x7fff5613ffff com.apple.OTSVG (1.0 - ???) <A0E0FC0B-B48F-3639-9C50-BAECC72988D5> /System/Library/PrivateFrameworks/OTSVG.framework/Versions/A/OTSVG 0x7fff572a2000 - 0x7fff572b1ff3 com.apple.PerformanceAnalysis (1.217 - 217) <8560F263-31F4-3CCA-84B1-30C296DC1A7D> /System/Library/PrivateFrameworks/PerformanceAnalysis.framework/Versions/A/PerformanceAnalysis 0x7fff59212000 - 0x7fff59269fff com.apple.ProtectedCloudStorage (1.0 - 1) <737DEC8B-342E-3BB2-AF69-D4428D467E4E> /System/Library/PrivateFrameworks/ProtectedCloudStorage.framework/Versions/A/ProtectedCloudStorage 0x7fff5926a000 - 0x7fff59288ff7 com.apple.ProtocolBuffer (1 - 263) <C5AC21FB-74AD-3FC2-B231-B1376751BBAE> /System/Library/PrivateFrameworks/ProtocolBuffer.framework/Versions/A/ProtocolBuffer 0x7fff59437000 - 0x7fff5948ff0f com.apple.ROCKit (24 - 24) <5437F6F7-453F-3D75-9E87-D2A090D82D25> /System/Library/PrivateFrameworks/ROCKit.framework/Versions/A/ROCKit 0x7fff5956f000 - 0x7fff59592ffb com.apple.RemoteViewServices (2.0 - 128) <68530B4D-B2C0-3271-941B-D9EA62095727> /System/Library/PrivateFrameworks/RemoteViewServices.framework/Versions/A/RemoteViewServices 0x7fff5ad98000 - 0x7fff5ad9bff7 com.apple.SecCodeWrapper (4.0 - 360.200.31) <5BEC98A0-698B-3EAF-9524-00A5B101C297> /System/Library/PrivateFrameworks/SecCodeWrapper.framework/Versions/A/SecCodeWrapper 0x7fff5af00000 - 0x7fff5b01ffff com.apple.Sharing (1176.11 - 1176.11) <9881AEAD-5410-33F7-A852-770C7FE677C9> /System/Library/PrivateFrameworks/Sharing.framework/Versions/A/Sharing 0x7fff5bdd1000 - 0x7fff5c081ff7 com.apple.SkyLight (1.600.0 - 336.80.6) <5F7D2312-0003-354C-82BC-DC346B1A98E6> /System/Library/PrivateFrameworks/SkyLight.framework/Versions/A/SkyLight 0x7fff5c850000 - 0x7fff5c85dfff com.apple.SpeechRecognitionCore (5.0.21 - 5.0.21) <816EC315-3E76-37B7-A495-B4AE031DA439> /System/Library/PrivateFrameworks/SpeechRecognitionCore.framework/Versions/A/SpeechRecognitionCore 0x7fff5d6be000 - 0x7fff5d74bff7 com.apple.Symbolication (10.0 - 64254.5) <7D5FB79E-1121-3DB0-9CBE-C023835ACE60> /System/Library/PrivateFrameworks/Symbolication.framework/Versions/A/Symbolication 0x7fff5d9a7000 - 0x7fff5d9d3fff com.apple.framework.SystemAdministration (1.0 - 1.0) <E41D573A-C356-344E-9E67-809F30D9DEF4> /System/Library/PrivateFrameworks/SystemAdministration.framework/Versions/A/SystemAdministration 0x7fff5dc54000 - 0x7fff5dc61ff3 com.apple.TCC (1.0 - 1) <55C045F7-D8AB-3BE6-970B-9457FA78E7E3> /System/Library/PrivateFrameworks/TCC.framework/Versions/A/TCC 0x7fff5ded0000 - 0x7fff5df97ff7 com.apple.TextureIO (3.8.4 - 3.8.1) <F9D5F55D-9A33-326E-8B2F-B533CC91DD64> /System/Library/PrivateFrameworks/TextureIO.framework/Versions/A/TextureIO 0x7fff5e051000 - 0x7fff5e052fff com.apple.TrustEvaluationAgent (2.0 - 31.200.1) <BD0BE410-E172-3585-82B2-869A1FE43092> /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/TrustEvaluationAgent 0x7fff5e058000 - 0x7fff5e212fff com.apple.UIFoundation (1.0 - 550.35) <1CAAA3AC-1477-3E24-B55C-07A704D7CA03> /System/Library/PrivateFrameworks/UIFoundation.framework/Versions/A/UIFoundation 0x7fff5ef00000 - 0x7fff5efe9fff com.apple.ViewBridge (400.1 - 400.1) <0BCCA232-710B-3F84-8341-A30F77B3A4E9> /System/Library/PrivateFrameworks/ViewBridge.framework/Versions/A/ViewBridge 0x7fff5f804000 - 0x7fff5f807fff com.apple.dt.XCTTargetBootstrap (1.0 - 1) <63A533F6-988D-3FED-A1C7-20BC725A0D4B> /System/Library/PrivateFrameworks/XCTTargetBootstrap.framework/Versions/A/XCTTargetBootstrap 0x7fff5fc38000 - 0x7fff5fc3aff3 com.apple.loginsupport (1.0 - 1) <5F1E000D-0674-3413-AB3E-83F7974666FB> /System/Library/PrivateFrameworks/login.framework/Versions/A/Frameworks/loginsupport.framework/Versions/A/loginsupport 0x7fff5fef4000 - 0x7fff5ff2cfff libCRFSuite.dylib (41.15.4) <62EDD39F-6D1B-334B-A9A2-5800714255BB> /usr/lib/libCRFSuite.dylib 0x7fff5ff2f000 - 0x7fff5ff3aff7 libChineseTokenizer.dylib (28.15.3) <8CD1C213-7F62-3F02-BFB1-D0A5EFF92AB0> /usr/lib/libChineseTokenizer.dylib 0x7fff5ff3b000 - 0x7fff5ffc7ff7 libCoreStorage.dylib (546.50.1) <F56AD958-416C-38EA-9829-DEAAB1F0C155> /usr/lib/libCoreStorage.dylib 0x7fff5ffcb000 - 0x7fff5ffccff7 libDiagnosticMessagesClient.dylib (107) <C542CB3C-AA44-3D7F-B88C-79CC31B481AB> /usr/lib/libDiagnosticMessagesClient.dylib 0x7fff60003000 - 0x7fff601c6ff7 libFosl_dynamic.dylib (18.3.2) <6EF1CB2A-2BDA-3458-B631-F794D72660FD> /usr/lib/libFosl_dynamic.dylib 0x7fff601e7000 - 0x7fff601eefff libMatch.1.dylib (31.200.1) <20216A5F-C625-3D87-9D95-C577F8687F6F> /usr/lib/libMatch.1.dylib 0x7fff6021c000 - 0x7fff6023bffb libMobileGestalt.dylib (645.200.76) <A2C32318-0E35-3963-B9B7-E1E92AD33BA6> /usr/lib/libMobileGestalt.dylib 0x7fff6023c000 - 0x7fff6023cfff libOpenScriptingUtil.dylib (178) <2EEBF84D-9E00-3570-AC0C-C49C8D25A8BF> /usr/lib/libOpenScriptingUtil.dylib 0x7fff6037d000 - 0x7fff6037effb libSystem.B.dylib (1252.200.5) <D5133811-9D66-3DEB-9521-0A67347C9A54> /usr/lib/libSystem.B.dylib 0x7fff60408000 - 0x7fff60409fff libThaiTokenizer.dylib (2.15.1) <A8235B04-F541-3856-BE2E-B58EE0483AD9> /usr/lib/libThaiTokenizer.dylib 0x7fff6041c000 - 0x7fff60432ffb libapple_nghttp2.dylib (1.24.1) <B8D45114-3868-3154-BC35-22597E3E7D8A> /usr/lib/libapple_nghttp2.dylib 0x7fff60433000 - 0x7fff6045cffb libarchive.2.dylib (54.200.3) <B47C54A0-3A30-374A-BD99-2304B9B0EC82> /usr/lib/libarchive.2.dylib 0x7fff6045d000 - 0x7fff6055cff7 libate.dylib (1.13.8) <0B27DB67-00B9-3979-9307-447C593A4AEB> /usr/lib/libate.dylib 0x7fff60560000 - 0x7fff60560ff3 libauto.dylib (187) <01824E49-F2EF-3FC1-ABF3-782EFDF6CA17> /usr/lib/libauto.dylib 0x7fff60638000 - 0x7fff60648ff3 libbsm.0.dylib (39.200.18) <5E5098D0-F7B2-32A1-8038-E709F6718D4E> /usr/lib/libbsm.0.dylib 0x7fff60649000 - 0x7fff60657fff libbz2.1.0.dylib (38.200.3) <4EE3C5E8-BEF3-3910-A231-B1AE2B437E01> /usr/lib/libbz2.1.0.dylib 0x7fff60658000 - 0x7fff606afff7 libc++.1.dylib (400.9.4) <D4AB366F-48A9-3C7D-91BD-41198F69DD57> /usr/lib/libc++.1.dylib 0x7fff606b0000 - 0x7fff606c5fff libc++abi.dylib (400.17) <BA948A32-9024-3E55-98D4-18E31F6AED25> /usr/lib/libc++abi.dylib 0x7fff606c6000 - 0x7fff606c6ff3 libcharset.1.dylib (51.200.6) <D998A58B-E4A8-3685-9A6A-43AFC28100EB> /usr/lib/libcharset.1.dylib 0x7fff606c7000 - 0x7fff606d7ffb libcmph.dylib (6.15.1) <5D776FF6-DF7F-3EDD-B920-C07ED76C672B> /usr/lib/libcmph.dylib 0x7fff606d8000 - 0x7fff606f0fdb libcompression.dylib (52.200.13) <13B000B6-285E-3A31-A4AD-6EA2742351F6> /usr/lib/libcompression.dylib 0x7fff6099b000 - 0x7fff609b1fff libcoretls.dylib (155.200.6) <6E68F922-752C-311F-B56D-EE391E6AE1F7> /usr/lib/libcoretls.dylib 0x7fff609b2000 - 0x7fff609b3ff3 libcoretls_cfhelpers.dylib (155.200.6) <7300BA76-39D2-349E-9FB8-EBE5947A708A> /usr/lib/libcoretls_cfhelpers.dylib 0x7fff60b52000 - 0x7fff60ce2ff3 libcrypto.35.dylib (22.200.4) <B4F83304-FB35-3CA5-8949-DE7D75B8A9D9> /usr/lib/libcrypto.35.dylib 0x7fff60e7d000 - 0x7fff61015ff7 libcrypto.42.dylib (22.200.4) <EFCEE49A-759B-3A9A-A164-ECD1A98D40F9> /usr/lib/libcrypto.42.dylib 0x7fff61016000 - 0x7fff61021ff7 libcsfde.dylib (546.50.1) <65E8F1F1-665A-381E-8932-D7CBA451991B> /usr/lib/libcsfde.dylib 0x7fff6102a000 - 0x7fff61080ffb libcups.2.dylib (462.9) <51E06E95-891F-3B88-A8C3-35B514C57239> /usr/lib/libcups.2.dylib 0x7fff610aa000 - 0x7fff610feff3 libcurl.4.dylib (105.200.2) <607613FE-3D84-3035-9C79-C6F72AF287D7> /usr/lib/libcurl.4.dylib 0x7fff611b8000 - 0x7fff611b8fff libenergytrace.dylib (17.200.1) <D62ED169-B91C-3CCB-ADF5-E66AE4007B51> /usr/lib/libenergytrace.dylib 0x7fff611ea000 - 0x7fff611efff7 libgermantok.dylib (17.15.2) <9CBF0658-E83B-32E6-B674-3EE72D22C041> /usr/lib/libgermantok.dylib 0x7fff611f0000 - 0x7fff611f5ff7 libheimdal-asn1.dylib (520.200.17) <58971629-3850-3905-A9A1-09FCF7A32815> /usr/lib/libheimdal-asn1.dylib 0x7fff61221000 - 0x7fff61312ff7 libiconv.2.dylib (51.200.6) <3240A278-F537-3EC8-BE0C-983797520A50> /usr/lib/libiconv.2.dylib 0x7fff61313000 - 0x7fff61576ffb libicucore.A.dylib (62107.0.1) <EAE6FC43-3AD2-3A53-9F7A-4E5E5F66D006> /usr/lib/libicucore.A.dylib 0x7fff615c3000 - 0x7fff615c4fff liblangid.dylib (128.15.1) <F79B6250-C0B1-3E8E-851F-6CA33B4311A3> /usr/lib/liblangid.dylib 0x7fff615c5000 - 0x7fff615ddfff liblzma.5.dylib (10.200.3) <3ADDFA63-F37A-3C9C-91E4-58EE3113B9A1> /usr/lib/liblzma.5.dylib 0x7fff615f5000 - 0x7fff616a5fff libmecab.1.0.0.dylib (779.15.23) <6A38FCDA-17CE-30C3-AB66-A714CF645384> /usr/lib/libmecab.1.0.0.dylib 0x7fff616a6000 - 0x7fff618e3fff libmecabra.dylib (779.15.23) <30E102AA-F3D3-3572-A1AE-1F2287DEF696> /usr/lib/libmecabra.dylib 0x7fff61abb000 - 0x7fff61e13fff libnetwork.dylib (1229.200.109) <AD59D28C-CCB2-3B34-B904-8CCCEB2CF320> /usr/lib/libnetwork.dylib 0x7fff61ea4000 - 0x7fff6262dfd7 libobjc.A.dylib (750) <9D7111F2-BDC7-3572-B987-79309B9AE957> /usr/lib/libobjc.A.dylib 0x7fff6262e000 - 0x7fff6262ffff libodfde.dylib (24.50.1) <B948D85A-165F-3E58-A8DD-24CF6454380A> /usr/lib/libodfde.dylib 0x7fff62640000 - 0x7fff62644ffb libpam.2.dylib (22.200.1) <8C419238-675A-3C41-B8D4-95E391CA630F> /usr/lib/libpam.2.dylib 0x7fff62647000 - 0x7fff6267dff7 libpcap.A.dylib (79.200.4) <5939AB23-B2A9-3C03-B6C1-4F0E5A21D9FC> /usr/lib/libpcap.A.dylib 0x7fff62797000 - 0x7fff627afffb libresolv.9.dylib (65.200.2) <0FEAEB01-B926-37FA-AB47-99BAC481C10B> /usr/lib/libresolv.9.dylib 0x7fff627b1000 - 0x7fff627edff7 libsandbox.1.dylib (851.201.1) <4498F061-7DEA-323C-88AC-3310556CE865> /usr/lib/libsandbox.1.dylib 0x7fff627ee000 - 0x7fff62800ff7 libsasl2.2.dylib (211) <205CC13E-4ED7-3CE9-987F-12B28C6115A7> /usr/lib/libsasl2.2.dylib 0x7fff62801000 - 0x7fff62802ffb libspindump.dylib (266) <0E60D709-0A48-3905-ACD1-9DDE6FD8B476> /usr/lib/libspindump.dylib 0x7fff62803000 - 0x7fff629cfff7 libsqlite3.dylib (274.20) <92515835-B51A-35DA-98E2-07A63353D4B8> /usr/lib/libsqlite3.dylib 0x7fff62ad2000 - 0x7fff62b1ffff libssl.44.dylib (22.200.4) <CF4931A6-5928-3E2B-8E31-1854F36B0C19> /usr/lib/libssl.44.dylib 0x7fff62b20000 - 0x7fff62b71ff7 libstdc++.6.dylib (104.1) <0E48A478-4CFD-3111-8027-1047508A1D73> /usr/lib/libstdc++.6.dylib 0x7fff62c5c000 - 0x7fff62c5fffb libutil.dylib (51.200.4) <91EE9BF4-FB06-3260-B502-7EFDAD5AF59B> /usr/lib/libutil.dylib 0x7fff62c60000 - 0x7fff62c6dfff libxar.1.dylib (404) <4B4D0206-0B62-3E89-AD07-E7BB9E4DFA68> /usr/lib/libxar.1.dylib 0x7fff62c72000 - 0x7fff62d55fff libxml2.2.dylib (32.6) <BFF70F01-6755-36B9-B7AA-724743E63503> /usr/lib/libxml2.2.dylib 0x7fff62d56000 - 0x7fff62d7eff3 libxslt.1.dylib (16.1) <F191E8B9-7530-30CA-873B-2FA2BF2D6374> /usr/lib/libxslt.1.dylib 0x7fff62d7f000 - 0x7fff62d91ffb libz.1.dylib (70.200.4) <99A3D725-8388-38B4-B66C-5E9006E6F072> /usr/lib/libz.1.dylib 0x7fff62e02000 - 0x7fff62e06ff3 libcache.dylib (81) <FE21A7E9-DBEB-33AC-836B-785AD036ACF4> /usr/lib/system/libcache.dylib 0x7fff62e07000 - 0x7fff62e11ff3 libcommonCrypto.dylib (60118.200.6) <78093D4F-91DB-35C8-981A-13375778B2E7> /usr/lib/system/libcommonCrypto.dylib 0x7fff62e12000 - 0x7fff62e19fff libcompiler_rt.dylib (63.4) <A4D9CF37-D076-3CE9-95F1-DA89DA1601B6> /usr/lib/system/libcompiler_rt.dylib 0x7fff62e1a000 - 0x7fff62e23ff3 libcopyfile.dylib (146.200.3) <4BCDADBF-79F5-3829-B47D-64DA0D44BCBF> /usr/lib/system/libcopyfile.dylib 0x7fff62e24000 - 0x7fff62ea8fff libcorecrypto.dylib (602.200.50) <7AEC5B72-0B92-37E8-808B-6732DB714139> /usr/lib/system/libcorecrypto.dylib 0x7fff62f2e000 - 0x7fff62f68ff7 libdispatch.dylib (1008.200.78) <B8962879-AD55-3CF0-9B0A-5F1D57D1E14B> /usr/lib/system/libdispatch.dylib 0x7fff62f69000 - 0x7fff62f98fff libdyld.dylib (625.13) <4B16C209-83D4-3817-9B62-C2F7FFB23755> /usr/lib/system/libdyld.dylib 0x7fff62f99000 - 0x7fff62f99ffb libkeymgr.dylib (30) <A73AA788-C35C-3284-BFCA-95B1BBDF0CF3> /usr/lib/system/libkeymgr.dylib 0x7fff62f9a000 - 0x7fff62fa6ff7 libkxld.dylib (4903.201.2) <EAF1CF8D-3843-33BE-8126-30994685B8F0> /usr/lib/system/libkxld.dylib 0x7fff62fa7000 - 0x7fff62fa7ff7 liblaunch.dylib (1336.201.2) <43E6698E-155E-3EAE-BAFF-CA5FCB35325C> /usr/lib/system/liblaunch.dylib 0x7fff62fa8000 - 0x7fff62fadfff libmacho.dylib (917) <17BF7038-9C70-3EE1-9E96-3AE10D49669E> /usr/lib/system/libmacho.dylib 0x7fff62fae000 - 0x7fff62fb0ff3 libquarantine.dylib (86.200.11) <C70DA995-0D6E-302C-A15E-F7F03A3857B4> /usr/lib/system/libquarantine.dylib 0x7fff62fb1000 - 0x7fff62fb2ff3 libremovefile.dylib (45.200.2) <D74A307B-3DC7-3992-B16C-DACB8207BE13> /usr/lib/system/libremovefile.dylib 0x7fff62fb3000 - 0x7fff62fcaff3 libsystem_asl.dylib (356.200.4) <EC9D8AD4-E5CB-3765-804A-9E1E9DC045D2> /usr/lib/system/libsystem_asl.dylib 0x7fff62fcb000 - 0x7fff62fcbfff libsystem_blocks.dylib (73) <26419398-C30C-30F1-B656-A92AFA9560F6> /usr/lib/system/libsystem_blocks.dylib 0x7fff62fcc000 - 0x7fff63054fff libsystem_c.dylib (1272.200.26) <3DEEE96E-6DF6-35AD-8654-D69AC26B907B> /usr/lib/system/libsystem_c.dylib 0x7fff63055000 - 0x7fff63058ff7 libsystem_configuration.dylib (963.200.27) <02CC3996-B34E-333C-8806-AE2699D34424> /usr/lib/system/libsystem_configuration.dylib 0x7fff63059000 - 0x7fff6305cff7 libsystem_coreservices.dylib (66) <254B6849-2C8F-302C-8616-B8324A11AB30> /usr/lib/system/libsystem_coreservices.dylib 0x7fff6305d000 - 0x7fff63063ffb libsystem_darwin.dylib (1272.200.26) <974E9EF7-DE72-34B7-B056-0A81C10DF8EB> /usr/lib/system/libsystem_darwin.dylib 0x7fff63064000 - 0x7fff6306aff7 libsystem_dnssd.dylib (878.200.35) <FFC665AA-B257-35AD-BD8B-32FD42C2EEC1> /usr/lib/system/libsystem_dnssd.dylib 0x7fff6306b000 - 0x7fff630b7ff3 libsystem_info.dylib (517.200.9) <0707C387-D7DE-372E-8FF1-3DE5C91932D6> /usr/lib/system/libsystem_info.dylib 0x7fff630b8000 - 0x7fff630dfff7 libsystem_kernel.dylib (4903.201.2) <45FAA4C0-D553-34FD-ADF8-884886AE0D2A> /usr/lib/system/libsystem_kernel.dylib 0x7fff630e0000 - 0x7fff6312bff7 libsystem_m.dylib (3158.200.7) <43D1796B-954F-37D6-B1AC-9D80DF0655A2> /usr/lib/system/libsystem_m.dylib 0x7fff6312c000 - 0x7fff63150ff7 libsystem_malloc.dylib (166.200.60) <846F6898-117C-3427-A8FB-3772FFC2410B> /usr/lib/system/libsystem_malloc.dylib 0x7fff63151000 - 0x7fff6315cffb libsystem_networkextension.dylib (767.200.40) <F84D5474-4DC1-3E1A-AE00-8CE9593278B4> /usr/lib/system/libsystem_networkextension.dylib 0x7fff6315d000 - 0x7fff63164fff libsystem_notify.dylib (172.200.21) <BCCB222F-DC64-3954-A836-DCCE6659CA5A> /usr/lib/system/libsystem_notify.dylib 0x7fff63165000 - 0x7fff6316efef libsystem_platform.dylib (177.200.16) <B75B04AD-69FE-3ADE-84D2-C17972FC8F49> /usr/lib/system/libsystem_platform.dylib 0x7fff6316f000 - 0x7fff63179fff libsystem_pthread.dylib (330.201.1) <87A6B136-E423-3B6D-A58A-137F392D7D9D> /usr/lib/system/libsystem_pthread.dylib 0x7fff6317a000 - 0x7fff6317dff7 libsystem_sandbox.dylib (851.201.1) <FBA7E09B-F10F-3424-90EA-B4999B7FB461> /usr/lib/system/libsystem_sandbox.dylib 0x7fff6317e000 - 0x7fff63180ff7 libsystem_secinit.dylib (30.200.13) <CBEAB62B-F0A0-342F-9878-CADC14A3CB0D> /usr/lib/system/libsystem_secinit.dylib 0x7fff63181000 - 0x7fff63188ff7 libsystem_symptoms.dylib (820.207.88) <B6E22FA8-0F7B-36FD-9D99-284056D3CB47> /usr/lib/system/libsystem_symptoms.dylib 0x7fff63189000 - 0x7fff6319eff7 libsystem_trace.dylib (906.200.86) <7983ED77-18B5-39A5-BE19-AE4F2832ADEA> /usr/lib/system/libsystem_trace.dylib 0x7fff631a0000 - 0x7fff631a5ffb libunwind.dylib (35.4) <41222EF6-2233-3CF4-947A-15D48CB8C030> /usr/lib/system/libunwind.dylib 0x7fff631a6000 - 0x7fff631d6fff libxpc.dylib (1336.201.2) <0A8747D1-33AA-37E1-B97A-BA9B95FE4E8C> /usr/lib/system/libxpc.dylib Sample analysis of process 8161 written to file /dev/stdout Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.