c141fe

FMGS.dll shutting down P3dV4

Recommended Posts

FMGS.dll is causing P3Dv4.3 to shutdown.  Load P3dv4 (tried several different airports), select A319, just sitting at the gate doing nothing while I read the manual and P3dv4 suddenly quits.

 

Initially installed everything in "C:\Users\Dad\Documents\Aerosoft", but after first failure I uninstalled Bus Pro and reinstalled it.  This time ASUpdater and General folders are in "C:\Users\Dad\Documents\Aerosoft" and the "Aerosoft A318-A319 Professional" folder is installed in "C:\Simulators\Aerosoft".

 

No change - P3Dv4 still shutdowns only after a few minutes.  Tried other aircraft - no problem

 

Here's the error report I am getting

Faulting application name: Prepar3D.exe, version: 4.3.29.25520, time stamp: 0x5b2c3263

Faulting module name: FMGS.dll, version: 2.64.0.27, time stamp: 0x5b45b9b3

Exception code: 0xc000041d

Fault offset: 0x000000000000370f

Faulting process id: 0x2d1c

Faulting application start time: 0x01d41a1667e00a56

Faulting application path: C:\Simulators\Prepar3D v4\Prepar3D.exe

Faulting module path: C:\Users\Dad\Documents\Aerosoft\Aerosoft A318-A319 Professional\SimObjects\Airplanes\Aerosoft A318-A319 Professional Base\Panel_Fallback\DLLs\FMGS.dll

Report Id: 696fec8d-4b32-4098-8148-a8ccfe561ac8

Faulting package full name:

Faulting package-relative application ID:

 

 

 

Share this post


Link to post
Share on other sites
5 hours ago, c141fe said:

FMGS.dll is causing P3Dv4.3 to shutdown.  Load P3dv4 (tried several different airports), select A319, just sitting at the gate doing nothing while I read the manual and P3dv4 suddenly quits.

 

Initially installed everything in "C:\Users\Dad\Documents\Aerosoft", but after first failure I uninstalled Bus Pro and reinstalled it.  This time ASUpdater and General folders are in "C:\Users\Dad\Documents\Aerosoft" and the "Aerosoft A318-A319 Professional" folder is installed in "C:\Simulators\Aerosoft".

 

No change - P3Dv4 still shutdowns only after a few minutes.  Tried other aircraft - no problem

 

Here's the error report I am getting

Faulting application name: Prepar3D.exe, version: 4.3.29.25520, time stamp: 0x5b2c3263

Faulting module name: FMGS.dll, version: 2.64.0.27, time stamp: 0x5b45b9b3

Exception code: 0xc000041d

Fault offset: 0x000000000000370f

Faulting process id: 0x2d1c

Faulting application start time: 0x01d41a1667e00a56

Faulting application path: C:\Simulators\Prepar3D v4\Prepar3D.exe

Faulting module path: C:\Users\Dad\Documents\Aerosoft\Aerosoft A318-A319 Professional\SimObjects\Airplanes\Aerosoft A318-A319 Professional Base\Panel_Fallback\DLLs\FMGS.dll

Report Id: 696fec8d-4b32-4098-8148-a8ccfe561ac8

Faulting package full name:

Faulting package-relative application ID:

 

 

 

Hi, please turn on logging in the config tool and upload after the next crash the log/dmp files (will be in the data folder).

Share this post


Link to post
Share on other sites

Additional info: If I operate the BUS PRO in "Full Screen" or with window maximized it seems to work OK. Crash appears to happen when changing screen size such as when switching from maximized to partial screen.

 

Flew the following profile with BUS PRO, PMDG NGX, and MaddogX. The problem only occurred with BUS PRO

 

KATL KATL08L GAIRY2 IRQ OSPRI6 KCHS15 KCHS @ FL 230

UTLive operating on Main Computer with Moderately heavy commercial traffic

AS for P3Dv4 providing weather from a networked computer.

Share this post


Link to post
Share on other sites

I am also having this issue. I am in the process of assigning views to the Airbus in Chase Plane and for that I have the simulator windowed and switch between applications. It only takes a couple of minutes for the sim to crash due to FMGS.dll error.

 

Based on the above described issue, it might have something to do with not being in full screen. I will fiddle around a bit to see whether it can be easily replicated and if it can be prevented.

 

EDIT: making Chase Plane be "on top" of the full screen P3D does not produce any crashes.

 

Share this post


Link to post
Share on other sites

We have never seen any crash related to being windowed and we are not able to recreate this is any way. But any information is of course welcome.

  • Upvote 1

Share this post


Link to post
Share on other sites

@c141fe: are you using Riva Tuner Statistics Server to limit FPS (running in the background) or MSI afterburner? Disabling them appears to have made the problem go away.

 

Perhaps something to do with the RTSS app trying to capture the screen or something.

  • Upvote 2

Share this post


Link to post
Share on other sites

That's good advise, we have seen a lot of crashes of the sim caused by tools like that.

  • Upvote 1

Share this post


Link to post
Share on other sites

After much troubleshooting I seem to have found the problem. First of all the problem was causing P3Dv4.3 to crash whenever I tried to move or resize a "Non-Maximized" window, so checked graphics settings, drivers, misc background apps with no luck.  Turned out to be something VERY simple - It seems I turned off "MIPMAP VC PANELS" on the Display page in P3Dv4.  This being off doesn't seem to impact any other aircraft, but it sure caused havoc on my A3XX pro.

image.png

  • Upvote 1

Share this post


Link to post
Share on other sites
13 minutes ago, c141fe said:

After much troubleshooting I seem to have found the problem. First of all the problem was causing P3Dv4.3 to crash whenever I tried to move or resize a "Non-Maximized" window, so checked graphics settings, drivers, misc background apps with no luck.  Turned out to be something VERY simple - It seems I turned off "MIPMAP VC PANELS" on the Display page in P3Dv4.  This being off doesn't seem to impact any other aircraft, but it sure caused havoc on my A3XX pro.

image.png

Excellent troubleshooting. Discipline you picked up in your flight engineer experience on 141's?

Share this post


Link to post
Share on other sites

Absolutely. I had the pleasure of flying the greatest airplane ever built for nearly 30 years :)

Share this post


Link to post
Share on other sites

Enabling mipmap VC panels makes them blurry for me personally (with the Airbus that is). Not sure what causes it but I disabled it. 

Share this post


Link to post
Share on other sites

Event 1026, .NET Runtime

Application: Prepar3D.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: exception code c0000005, exception address 00007FFDC6B08DA2

Event 1000, Application Error
Faulting application name: Prepar3D.exe, version: 4.3.29.25520, time stamp: 0x5b2c3263
Faulting module name: FMGS.dll, version: 2.64.0.29, time stamp: 0x5b48573d
Exception code: 0xc0000005
Fault offset: 0x00000000000b8da2
Faulting process id: 0x19cc
Faulting application start time: 0x01d41d267602ad50
Faulting application path: D:\Program Files\Lockheed Martin\Prepar3D v4\Prepar3D.exe
Faulting module path: C:\Users\Mert\Documents\Aerosoft\Aerosoft A318-A319 Professional\SimObjects\Airplanes\Aerosoft A318-A319 Professional Base\Panel_Fallback\DLLs\FMGS.dll
Report Id: 58876023-6a9b-4bc9-b4f9-13159e5a0aad
Faulting package full name: 
Faulting package-relative application ID: 
 

Share this post


Link to post
Share on other sites

During the climb of LTFE-LTBA flight and during the landing of LTBA-LTAI flight.Yesterday LTFE-LTBA Climbing Today LTBA-LTAI Descent and CRASH 

Share this post


Link to post
Share on other sites

Hello, occurs when I tried, during an active flight plan, to initiate a holding at the present position. 
This occurs every time when I try it.
What can I do?

 

Report.wer

Share this post


Link to post
Share on other sites

There will be a new version in a few days that 'might' change that behavior.

  • Upvote 1

Share this post


Link to post
Share on other sites

Hi Mathijs,

many thanks.

I hope I understand you right and it was a known bug witch is fixed in the new release;-)

Anyway.

I'am looking forward for the new version

regards

Achim

Share this post


Link to post
Share on other sites

I also just got two FMGS.dll crash. The First one when closing all doors and the seond one when just starting pushback. Both with the A320 easyJet. Switching off VC_Mipmap is not an option because it makes all cockpit displays shimmering in VR.

Will try again with the A319, because it seems for me that I got more issues with the bigger busses.

 

Quote
  prepar3d.exe
      4.3.29.25520
      5b2c3263
      FMGS.dll
      2.64.0.51
      5bac80d7
      c0000409
      000000000007ca2c
      c74
      01d461a2ba3bc0d8
      G:\Games\P3Dv4\prepar3d.exe
      G:\Games\P3D_Programme\Airbus\Aerosoft A320-A321 Professional\SimObjects\Airplanes\Aerosoft A320-A321 Professional Base\Panel_Fallback\DLLs\FMGS.dll
      9cce8485-5166-427d-993a-930692f65c4d

 

Share this post


Link to post
Share on other sites

Same here, two FMGS.dll crashes in a row. What they both had in common? I was changing the screen size..

 

Report:

 

Naam van toepassing met fout: Prepar3D.exe, versie: 4.3.29.25520, tijdstempel: 0x5b2c3263
Naam van module met fout: FMGS.dll, versie: 2.64.0.51, tijdstempel: 0x5bac80d7
Uitzonderingscode: 0xc000041d
Foutmarge: 0x000000000000371f
Id van proces met fout: 0x56f8
Starttijd van toepassing met fout: 0x01d461ad0c87edf1
Pad naar toepassing met fout: D:\Lockheed Martin\Prepar3D v4\Prepar3D.exe
Pad naar module met fout: D:\Lockheed Martin\Aerosoft\Aerosoft A320-A321 Professional\SimObjects\Airplanes\Aerosoft A320-A321 Professional Base\Panel_Fallback\DLLs\FMGS.dll
Rapport-id: 05f205d0-9c7b-494e-b3f2-b7681ce3d005
Volledige pakketnaam met fout: 
Relatieve toepassings-id van pakket met fout: 

 

Share this post


Link to post
Share on other sites
57 minutes ago, Tommius said:

Aerosoft A320-A321 Professional Base\Panel_Fallback\DLLs\FMGS.dll
 

Try an A319 or 318. I got the feeling it only happens with the big ones. 

For me it happened..

1st Flight: EGKK-LOWW, Gate 104, A320 EasyJet, SkyForce Weather, In game time: 11/10/2018 17:15, closing cargo door, crash

2nd Flight: EGKK-LOWW, Gate 104, A320 EasyJet, SkyForce Weather, In game time: 11/10/2018 17:15, starting push back, crash

3th Flight: EGKK-LOWW, Gate 104, A319 EasyJet, SkyForce Weather, In game time: 11/10/2018 17:15, still on the way 20min before landing

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now