Jump to content

Check that. I have enable the content erros on P3D V4. It say ERROR, LOADIND DC-8 TAXI , LANDING. AN THERES A LOT MORE OF other planes.


Eduard Gasull

Recommended Posts

I think that smells a reinstall of P3D right?

 

 

[error.0]
error=Found Duplicate Key Name
 File:C:\Users\Iclon\Documents\Prepar3D v4 Add-ons\Aerosoft DC8\SimObjects\Airplanes\DC-8_50\aircraft.cfg
 Section:General
 Key:atc_type

[error.1]
error=Found Duplicate Key Name
 File:C:\Users\Iclon\Documents\Prepar3D v4 Add-ons\Aerosoft DC8\SimObjects\Airplanes\DC-8_50\aircraft.cfg
 Section:General
 Key:atc_model

[error.2]
error=Found Duplicate Key Name
 File:C:\Users\Iclon\Documents\Prepar3D v4 Add-ons\Aerosoft DC8\SimObjects\Airplanes\DC-8_50\aircraft.cfg
 Section:General
 Key:editable

[error.3]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo C172RG_CutlassII\aircraft.cfg
 Section:propeller
 Key:minimum_reverse_beta

[error.4]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA40\aircraft.cfg
 Section:propeller
 Key:minimum_reverse_beta

[error.5]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
 Section:electrical
 Key:light_panel

[error.6]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
 Section:propeller
 Key:minimum_reverse_beta

[error.7]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
Section: airspeed_indicators

[error.8]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
Section: direction_indicators

[error.9]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
Section: attitude_indicators

[error.10]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
Section: turn_indicators

[error.11]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado E50P EMB500_Phenom 100\panel.gtn\panel.cfg
Section: Window09

[error.12]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado S550_Citation II\aircraft.cfg
 Section:attitude_indicators
 Key:attitude_indicator.0

[error.13]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NL2000 AI F-16AM\aircraft.cfg
 Section:fltsim.4
 Key:ui_type

[error.14]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NLAI PAI F100\aircraft.cfg
 Section:LIGHTS
 Key:light.7

[error.15]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NLAI PAI F50\aircraft.cfg
 Section:weight_and_balance
 Key:max_number_of_stations

[error.16]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NLAI PAI F70\aircraft.cfg
 Section:LIGHTS
 Key:light.7

[error.17]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NLAIS 737 'BABY BOEINGS'\aircraft.cfg
Section: fltsim.4

[error.18]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NLAI_atr_DHL\aircraft.cfg
 Section:Flaps.0
 Key:flaps-position.2

[error.19]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\GroundVehicles\Mitsubishi_PAJERO\aircraft.cfg
 Section:fltsim.0
 Key:description

[error.20]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_AIG_B757-300\aircraft.cfg
Section: vacuum_system

[error.21]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_AIM_ERJ145XR\aircraft.cfg
Section: fltsim.0

[error.22]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_ARNZ_CONC\aircraft.cfg
 Section:flight_tuning
 Key:pitch_stability

[error.23]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_ARNZ_CONC\aircraft.cfg
 Section:flight_tuning
 Key:roll_stability

[error.24]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_ARNZ_CONC\aircraft.cfg
 Section:flight_tuning
 Key:yaw_stability

[error.25]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_FSND_C750\aircraft.cfg
Section: altimeters

[error.26]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_HTAI_BE20\aircraft.cfg
 Section:autopilot
 Key:max_throttle_rate

[error.27]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_HTAI_BE9L\aircraft.cfg
Section: General

[error.28]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_HTAI_BE9L\aircraft.cfg
 Section:autopilot
 Key:max_throttle_rate

[error.29]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_JBAI_CL604\aircraft.cfg
Section: EFFECTS

[error.30]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_OSP_ATR42_300\aircraft.cfg
 Section:Flaps.0
 Key:flaps-position.2

[error.31]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_OSP_ATR42_400\aircraft.cfg
 Section:Flaps.0
 Key:flaps-position.2

[error.32]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_OSP_ATR42_500\aircraft.cfg
 Section:Flaps.0
 Key:flaps-position.2

[error.33]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_PAI_F50\aircraft.cfg
 Section:weight_and_balance
 Key:max_number_of_stations

[error.34]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_PAI_F50\aircraft.cfg
Section: brakes

[error.35]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_PAI_F50\aircraft.cfg
Section: gear_warning_system

[error.36]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_PAI_F50\aircraft.cfg
Section: hydraulic_system

[error.37]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_PAI_F50\aircraft.cfg
Section: stall_warning

[error.38]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_PAI_F50\aircraft.cfg
Section: attitude_indicators

[error.39]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_PAI_F50\aircraft.cfg
Section: turn_indicators

[error.40]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_RAI_E75L\aircraft.cfg
Section: fltsim.4

[error.41]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_SBAI_AN72\aircraft.cfg
 Section:flaps.0
 Key:flaps-position.4

[error.42]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.0

[error.43]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.1

[error.44]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.2

[error.45]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.3

[error.46]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.4

[error.47]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.6

[error.48]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.7

[error.49]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.8

[error.50]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.9

[error.51]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.10

[error.52]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.11

[error.53]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.12

[error.54]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.13

[error.55]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.14

[error.56]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.15

[error.57]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.16

[error.58]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.17

[error.59]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.18

[error.60]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.19

[error.61]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.20

[error.62]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_B777-200ER\aircraft.cfg
Section: fltsim.21

[error.63]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_Dash8-400\aircraft.cfg
Section: fltsim.0

[error.64]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\vPilotAI\VPA_TFS_S340\aircraft.cfg
Section: fltsim.0

[error.65]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\IVAO_MTL\IVAO_B748\aircraft.cfg
Section: flaps.1

[error.66]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\IVAO_MTL\IVAO_B788\aircraft.cfg
Section: flaps.2

[error.67]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\IVAO_MTL\IVAO_B789\aircraft.cfg
Section: flaps.2

[error.68]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\IVAO_MTL\IVAO_F86\aircraft.cfg
Section: direction_indicators

[error.69]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\IVAO_MTL\IVAO_HUNT\aircraft.cfg
Section: direction_indicators

[error.70]
error=Found Duplicate Key Name
 File:C:\Users\Iclon\Documents\Prepar3D v4 Add-ons\Aerosoft DC8\SimObjects\Airplanes\DC-8_50\aircraft.cfg
 Section:General
 Key:atc_type

[error.71]
error=Found Duplicate Key Name
 File:C:\Users\Iclon\Documents\Prepar3D v4 Add-ons\Aerosoft DC8\SimObjects\Airplanes\DC-8_50\aircraft.cfg
 Section:General
 Key:atc_model

[error.72]
error=Found Duplicate Key Name
 File:C:\Users\Iclon\Documents\Prepar3D v4 Add-ons\Aerosoft DC8\SimObjects\Airplanes\DC-8_50\aircraft.cfg
 Section:General
 Key:editable

[error.73]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo C172RG_CutlassII\aircraft.cfg
 Section:propeller
 Key:minimum_reverse_beta

[error.74]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA40\aircraft.cfg
 Section:propeller
 Key:minimum_reverse_beta

[error.75]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
 Section:electrical
 Key:light_panel

[error.76]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
 Section:propeller
 Key:minimum_reverse_beta

[error.77]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
Section: airspeed_indicators

[error.78]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
Section: direction_indicators

[error.79]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
Section: attitude_indicators

[error.80]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
Section: turn_indicators

[error.81]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado S550_Citation II\aircraft.cfg
 Section:attitude_indicators
 Key:attitude_indicator.0

[error.82]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NL2000 AI F-16AM\aircraft.cfg
 Section:fltsim.4
 Key:ui_type

[error.83]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NLAI PAI F100\aircraft.cfg
 Section:LIGHTS
 Key:light.7

[error.84]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NLAI PAI F50\aircraft.cfg
 Section:weight_and_balance
 Key:max_number_of_stations

[error.85]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NLAI PAI F70\aircraft.cfg
 Section:LIGHTS
 Key:light.7

[error.86]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NLAIS 737 'BABY BOEINGS'\aircraft.cfg
Section: fltsim.4

[error.87]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NLAI_atr_DHL\aircraft.cfg
 Section:Flaps.0
 Key:flaps-position.2

[error.88]
error=Found Duplicate Key Name
 File:C:\Users\Iclon\Documents\Prepar3D v4 Add-ons\Aerosoft DC8\SimObjects\Airplanes\DC-8_50\aircraft.cfg
 Section:General
 Key:atc_type

[error.89]
error=Found Duplicate Key Name
 File:C:\Users\Iclon\Documents\Prepar3D v4 Add-ons\Aerosoft DC8\SimObjects\Airplanes\DC-8_50\aircraft.cfg
 Section:General
 Key:atc_model

[error.90]
error=Found Duplicate Key Name
 File:C:\Users\Iclon\Documents\Prepar3D v4 Add-ons\Aerosoft DC8\SimObjects\Airplanes\DC-8_50\aircraft.cfg
 Section:General
 Key:editable

[error.91]
error=Failed to load visual effect "DC8_landing"

[error.92]
error=Failed to load visual effect "DC8_landing"

[error.93]
error=Failed to load visual effect "DC8_landing"

[error.94]
error=Failed to load visual effect "DC8_taxi"

[error.95]
error=Failed to load visual effect "DC8_ground"

[error.96]
error=Failed to load visual effect "DC8_ground"

[error.97]
error=Failed to load visual effect "DC8_landing"

[error.98]
error=Failed to load visual effect "DC8_landing"

[error.99]
error=Failed to load visual effect "DC8_landing"

[error.100]
error=Failed to load visual effect "DC8_taxi"

[error.101]
error=Failed to load visual effect "DC8_ground"

[error.102]
error=Failed to load visual effect "DC8_ground"

[error.103]
error=Texture INTERIOR..DDS failed to load (FE_REQUEST_STATUS==13)

[error.104]
error=Texture nose.dds failed to load (FE_REQUEST_STATUS==13)

[error.105]
error=Failed to load visual effect "DC8_landing"

[error.106]
error=Failed to load visual effect "DC8_landing"

[error.107]
error=Failed to load visual effect "DC8_landing"

[error.108]
error=Failed to load visual effect "DC8_taxi"

[error.109]
error=Failed to load visual effect "DC8_ground"

[error.110]
error=Failed to load visual effect "DC8_ground"

[error.111]
error=Failed to load visual effect "DC8_landing"

[error.112]
error=Failed to load visual effect "DC8_landing"

[error.113]
error=Failed to load visual effect "DC8_landing"

[error.114]
error=Failed to load visual effect "DC8_taxi"

[error.115]
error=Failed to load visual effect "DC8_ground"

[error.116]
error=Failed to load visual effect "DC8_ground"

[error.117]
error=Texture INTERIOR..DDS failed to load (FE_REQUEST_STATUS==13)

[error.118]
error=Texture nose.dds failed to load (FE_REQUEST_STATUS==13)

[error.119]
error=Failed to load visual effect "DC8_landing"

[error.120]
error=Failed to load visual effect "DC8_landing"

[error.121]
error=Failed to load visual effect "DC8_landing"

[error.122]
error=Failed to load visual effect "DC8_taxi"

[error.123]
error=Failed to load visual effect "DC8_ground"

[error.124]
error=Failed to load visual effect "DC8_ground"

[error.125]
error=Failed to load visual effect "DC8_landing"

[error.126]
error=Failed to load visual effect "DC8_landing"

[error.127]
error=Failed to load visual effect "DC8_landing"

[error.128]
error=Failed to load visual effect "DC8_taxi"

[error.129]
error=Failed to load visual effect "DC8_ground"

[error.130]
error=Failed to load visual effect "DC8_ground"

[error.131]
error=Texture INTERIOR..DDS failed to load (FE_REQUEST_STATUS==13)

[error.132]
error=Texture nose.dds failed to load (FE_REQUEST_STATUS==13)

[error.133]
error=Failed to load visual effect "DC8_landing"

[error.134]
error=Failed to load visual effect "DC8_landing"

[error.135]
error=Failed to load visual effect "DC8_landing"

[error.136]
error=Failed to load visual effect "DC8_taxi"

[error.137]
error=Failed to load visual effect "DC8_ground"

[error.138]
error=Failed to load visual effect "DC8_ground"

[error.139]
error=Failed to load visual effect "DC8_landing"

[error.140]
error=Failed to load visual effect "DC8_landing"

[error.141]
error=Failed to load visual effect "DC8_landing"

[error.142]
error=Failed to load visual effect "DC8_taxi"

[error.143]
error=Failed to load visual effect "DC8_ground"

[error.144]
error=Failed to load visual effect "DC8_ground"

[error.145]
error=Texture INTERIOR..DDS failed to load (FE_REQUEST_STATUS==13)

[error.146]
error=Texture nose.dds failed to load (FE_REQUEST_STATUS==13)

[error.147]
error=Failed to load visual effect "DC8_landing"

[error.148]
error=Failed to load visual effect "DC8_landing"

[error.149]
error=Failed to load visual effect "DC8_landing"

[error.150]
error=Failed to load visual effect "DC8_taxi"

[error.151]
error=Failed to load visual effect "DC8_ground"

[error.152]
error=Failed to load visual effect "DC8_ground"

[error.153]
error=Failed to load visual effect "DC8_landing"

[error.154]
error=Failed to load visual effect "DC8_landing"

[error.155]
error=Failed to load visual effect "DC8_landing"

[error.156]
error=Failed to load visual effect "DC8_taxi"

[error.157]
error=Failed to load visual effect "DC8_ground"

[error.158]
error=Failed to load visual effect "DC8_ground"

[error.159]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo C172RG_CutlassII\aircraft.cfg
 Section:propeller
 Key:minimum_reverse_beta

[error.160]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA40\aircraft.cfg
 Section:propeller
 Key:minimum_reverse_beta

[error.161]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
 Section:electrical
 Key:light_panel

[error.162]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
 Section:propeller
 Key:minimum_reverse_beta

[error.163]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
Section: airspeed_indicators

[error.164]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
Section: direction_indicators

[error.165]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
Section: attitude_indicators

[error.166]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Alabeo DA42_Twin_Star\aircraft.cfg
Section: turn_indicators

[error.167]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado S550_Citation II\aircraft.cfg
 Section:attitude_indicators
 Key:attitude_indicator.0

[error.168]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NL2000 AI F-16AM\aircraft.cfg
 Section:fltsim.4
 Key:ui_type

[error.169]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NLAI PAI F100\aircraft.cfg
 Section:LIGHTS
 Key:light.7

[error.170]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NLAI PAI F50\aircraft.cfg
 Section:weight_and_balance
 Key:max_number_of_stations

[error.171]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NLAI PAI F70\aircraft.cfg
 Section:LIGHTS
 Key:light.7

[error.172]
error=Duplicate Section Name
File: C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NLAIS 737 'BABY BOEINGS'\aircraft.cfg
Section: fltsim.4

[error.173]
error=Found Duplicate Key Name
 File:C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\NLAI_atr_DHL\aircraft.cfg
 Section:Flaps.0
 Key:flaps-position.2

[error.174]
error=Found Duplicate Key Name
 File:C:\Users\Iclon\Documents\Prepar3D v4 Add-ons\Aerosoft DC8\SimObjects\Airplanes\DC-8_50\aircraft.cfg
 Section:General
 Key:atc_type

[error.175]
error=Found Duplicate Key Name
 File:C:\Users\Iclon\Documents\Prepar3D v4 Add-ons\Aerosoft DC8\SimObjects\Airplanes\DC-8_50\aircraft.cfg
 Section:General
 Key:atc_model

[error.176]
error=Found Duplicate Key Name
 File:C:\Users\Iclon\Documents\Prepar3D v4 Add-ons\Aerosoft DC8\SimObjects\Airplanes\DC-8_50\aircraft.cfg
 Section:General
 Key:editable

[error.177]
error=Failed to load visual effect "DC8_landing"

[error.178]
error=Failed to load visual effect "DC8_landing"

[error.179]
error=Failed to load visual effect "DC8_landing"

[error.180]
error=Failed to load visual effect "DC8_taxi"

[error.181]
error=Failed to load visual effect "DC8_ground"

[error.182]
error=Failed to load visual effect "DC8_ground"

[error.183]
error=Failed to load visual effect "DC8_landing"

[error.184]
error=Failed to load visual effect "DC8_landing"

[error.185]
error=Failed to load visual effect "DC8_landing"

[error.186]
error=Failed to load visual effect "DC8_taxi"

[error.187]
error=Failed to load visual effect "DC8_ground"

[error.188]
error=Failed to load visual effect "DC8_ground"

[error.189]
error=Gauge/Script Error
Type: Gauge
Name: INSFPLoadComputer_DC8
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "and>" in: and>

[error.190]
error=Gauge/Script Error
Type: Gauge
Name: INSFPLoadComputer_DC8
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "and>" in: and>

[error.191]
error=Gauge/Script Error
Type: Gauge
Name: INSMain_DC8
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "//" in: // a key was pressed
                  if{
                      @INSKeySound
                      (L:CDUKeyPress:1,enum) sp0
                      l0 32 == l0 72 == l0 92 == or or !
                      if{        

[error.192]
error=Gauge/Script Error
Type: Gauge
Name: INSMain_DC8
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "a" in: a key was pressed
                  if{
                      @INSKeySound
                      (L:CDUKeyPress:1,enum) sp0
                      l0 32 == l0 72 == l0 92 == or or !
                      if{         
  

[error.193]
error=Gauge/Script Error
Type: Gauge
Name: INSMain_DC8
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "key" in: key was pressed
                  if{
                      @INSKeySound
                      (L:CDUKeyPress:1,enum) sp0
                      l0 32 == l0 72 == l0 92 == or or !
                      if{         
  

[error.194]
error=Gauge/Script Error
Type: Gauge
Name: INSMain_DC8
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "was" in: was pressed
                  if{
                      @INSKeySound
                      (L:CDUKeyPress:1,enum) sp0
                      l0 32 == l0 72 == l0 92 == or or !
                      if{         
       0 

[error.195]
error=Gauge/Script Error
Type: Gauge
Name: INSMain_DC8
Error: Invalid script (no command is more than 4 characters): "pressed
                  if{
                      @INSKeySound
                      (L:CDUKeyPress:1,enum) sp0
                      l0 32 == l0 72 == l0 92 == or or !
                      if{         
       0 (>L:INS7KeyDME:1,bool) 0 (>L:INS9KeyDME:1,bool) 0 

[error.196]
error=Gauge/Script Error
Type: Gauge
Name: INSMain_DC8
Error: Invalid script (no command is more than 4 characters): "@INSKeySound
                      (L:CDUKeyPress:1,enum) sp0
                      l0 32 == l0 72 == l0 92 == or or !
                      if{         
       0 (>L:INS7KeyDME:1,bool) 0 (>L:INS9KeyDME:1,bool) 0 (>L:INS3KeyDME:1,bool)
     }  

[error.197]
error=Gauge/Script Error
Type: Gauge
Name: INSMain_DC8
Error: Invalid script (no command is more than 4 characters): "@INSKeySound }
               (L:Test:1 Switch Pos,enum) 2 + 3 min (>L:Test:1 Switch Pos, enum) 1 (>L:INSTest:1 On, bool) 
           (L:INSTestAction:1,enum) ++ d 2 <= * (L:INSActMalfCode:1,enum) 0 != * (>L:INS

[error.198]
error=Gauge/Script Error
Type: Gauge
Name: INSMain_DC8
Error: Invalid script (no command is more than 4 characters): "@INSKeySound }
     }


                            
                          (L:CDUKeyPress:1,enum) 78 ==   (* Key "North" *)     
                          
             (L:INSData:1 Selector, enum) 3 == (L:INSisInNAV:1,bool) (L:INSPower:1 On, bool) and ! s1 (L:Hold:1

[error.199]
error=Gauge/Script Error
Type: Gauge
Name: INSMain_DC8
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "//" in: // a key was pressed
                  if{
                      @INSKeySound
                      (L:CDUKeyPress:2,enum) sp0
                      l0 32 == l0 72 == l0 92 == or or !
                      if{        

[error.200]
error=Gauge/Script Error
Type: Gauge
Name: INSMain_DC8
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "a" in: a key was pressed
                  if{
                      @INSKeySound
                      (L:CDUKeyPress:2,enum) sp0
                      l0 32 == l0 72 == l0 92 == or or !
                      if{         
  

[error.201]
error=Gauge/Script Error
Type: Gauge
Name: INSMain_DC8
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "key" in: key was pressed
                  if{
                      @INSKeySound
                      (L:CDUKeyPress:2,enum) sp0
                      l0 32 == l0 72 == l0 92 == or or !
                      if{         
  

[error.202]
error=Gauge/Script Error
Type: Gauge
Name: INSMain_DC8
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "was" in: was pressed
                  if{
                      @INSKeySound
                      (L:CDUKeyPress:2,enum) sp0
                      l0 32 == l0 72 == l0 92 == or or !
                      if{         
       0 

[error.203]
error=Gauge/Script Error
Type: Gauge
Name: INSMain_DC8
Error: Invalid script (no command is more than 4 characters): "pressed
                  if{
                      @INSKeySound
                      (L:CDUKeyPress:2,enum) sp0
                      l0 32 == l0 72 == l0 92 == or or !
                      if{         
       0 (>L:INS7KeyDME:2,bool) 0 (>L:INS9KeyDME:2,bool) 0 

[error.204]
error=Gauge/Script Error
Type: Gauge
Name: INSMain_DC8
Error: Invalid script (no command is more than 4 characters): "@INSKeySound
                      (L:CDUKeyPress:2,enum) sp0
                      l0 32 == l0 72 == l0 92 == or or !
                      if{         
       0 (>L:INS7KeyDME:2,bool) 0 (>L:INS9KeyDME:2,bool) 0 (>L:INS3KeyDME:2,bool)
     }  

[error.205]
error=Gauge/Script Error
Type: Gauge
Name: INSMain_DC8
Error: Invalid script (no command is more than 4 characters): "@INSKeySound }
               (L:Test:2 Switch Pos,enum) 2 + 3 min (>L:Test:2 Switch Pos, enum) 1 (>L:INSTest:2 On, bool) 
           (L:INSTestAction:2,enum) ++ d 2 <= * (L:INSActMalfCode:2,enum) 0 != * (>L:INS

[error.206]
error=Gauge/Script Error
Type: Gauge
Name: INSMain_DC8
Error: Invalid script (no command is more than 4 characters): "@INSKeySound }
     }

                            
                          (L:CDUKeyPress:2,enum) 78 ==   (* Key "North" *)     
                          
             (L:INSData:2 Selector, enum) 3 == (L:INSisInNAV:2,bool) (L:INSPower:2 On, bool) and ! s1 (L:Hold:2 

[error.207]
error=Gauge/Script Error
Type: Gauge
Name: INS1Code_DC8
Error: Need units for (A:Sim On Ground)

[error.208]
error=Gauge/Script Error
Type: Gauge
Name: INS1Code_DC8
Error: Need units for (A:Sim On Ground)

[error.209]
error=Gauge/Script Error
Type: Gauge
Name: INS1Code_DC8
Error: Need units for (A:Sim On Ground)

[error.210]
error=Gauge/Script Error
Type: Gauge
Name: INS2Code_DC8
Error: Need units for (A:Sim On Ground)

[error.211]
error=Gauge/Script Error
Type: Gauge
Name: INS2Code_DC8
Error: Need units for (A:Sim On Ground)

[error.212]
error=Gauge/Script Error
Type: Gauge
Name: INS2Code_DC8
Error: Need units for (A:Sim On Ground)

[error.213]
error=Key values exist outside of a section: 
 File:C:\Users\Iclon\Documents\Prepar3D v4 Add-ons\Aerosoft DC8\SimObjects\Airplanes\DC-8_50\sound\sound.cfg
 Key:www.turbinesoundstudios.com (C) copyright 2017- Licenced to Aerosoft.

[error.214]
error=file "CrashGround(.wav|.ogg)" not found

[error.215]
error=file "CrashWater(.wav|.ogg)" not found

[error.216]
error=file "door_small_open(.wav|.ogg)" not found

[error.217]
error=file "door_small_close(.wav|.ogg)" not found

[error.218]
error=Taxiway path with 0 width

[error.219]
error=Taxiway path with 0 width

[error.220]
error=Taxiway path with 0 width

[error.221]
error=Taxiway path with 0 width

[error.222]
error=Taxiway path with 0 width

[error.223]
error=Taxiway path with 0 width

[error.224]
error=Taxiway path with 0 width

[error.225]
error=Taxiway path with 0 width

[error.226]
error=Payload station indexes should be between 1 - 19

[error.227]
error=Texture INTERIOR..DDS failed to load (FE_REQUEST_STATUS==13)

[error.228]
error=Texture nose.dds failed to load (FE_REQUEST_STATUS==13)

[error.229]
error=Texture DC8_beacon.bmp failed to load (FE_REQUEST_STATUS==13)

[error.230]
error=Taxiway path with 0 width

[error.231]
error=Taxiway path with 0 width

[error.232]
error=Taxiway path with 0 width

[error.233]
error=Taxiway path with 0 width

[error.234]
error=Taxiway path with 0 width

[error.235]
error=Taxiway path with 0 width

[error.236]
error=Taxiway path with 0 width

[error.237]
error=Taxiway path with 0 width

[error.238]
error=Texture DC8_beacon.bmp failed to load (FE_REQUEST_STATUS==13)

Link to comment
Share on other sites

  • Developer

Don't reinstall yet -- it seems the wing and taxi lights aren't in the effects folder.  I'll post them in a moment and we'll get it the hot fix section.  Entirely my fault -- not your system.  I still have them in my P3D  main folder.

Link to comment
Share on other sites

Just now, Michael2 said:

Don't reinstall yet -- it seems the wing and taxi lights aren't in the effects folder.  I'll post them in a moment and we'll get it the hot fix section.  Entirely my fault -- not your system.  I still have them in my P3D  main folder.

and finally we catch the issue! thanks for your support Michael!

Link to comment
Share on other sites

And those 'Duplicate Section Name' errors indicate that an entry appears multiple times in the related *.cfg file. I see some in your AI folders. I.e. 'Section: fltsim.6' This means [fltsim.6] appears twice. As a result every AI aircraft after the first [fltsim.6] entry is not shown in the sim. I am using a freeware tool FSRenum to automatically re-number my aircraft.cfg files (just place it in the same folder as your aircraft.cfg is located). You can also use ACA2017 to scan for any other errors in your AI set-up.

Link to comment
Share on other sites

58 minutes ago, Mathijs Kok said:

90% of these errors are nonsense. Re-installing the same add-ons on a clean P3D would get the same errors and none of them are in fact causing issues.

 

 

thanks for the info, the main key here is that finally, Michael finds the issue,  no dynamic lights effect on the installer. 

 

15 minutes ago, Er!k said:

And those 'Duplicate Section Name' errors indicate that an entry appears multiple times in the related *.cfg file. I see some in your AI folders. I.e. 'Section: fltsim.6' This means [fltsim.6] appears twice. As a result every AI aircraft after the first [fltsim.6] entry is not shown in the sim. I am using a freeware tool FSRenum to automatically re-number my aircraft.cfg files (just place it in the same folder as your aircraft.cfg is located). You can also use ACA2017 to scan for any other errors in your AI set-up.

ACA2017 is a freeware as well? thanks, for the info I will do that.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy & Terms of Use