Jump to content

CRJ X updated to 1.0.0.5


Recommended Posts

  • Aerosoft

1.0.0.0 Release

1.0.0.3 Rev 248
- [Fixed] FMS: Added additional valdity checks for any fuel and time output to avoid potential CTDs due to buffer overflows*
- [Fixed] AP: APPR mode not capturing glideslope when NAV mode was active before
- [Fixed] FMS: Fixed a problem that caused Crs/Hdg to Along Track Distance legs to not properly switch to the next waypoint (KMSP 30R LEINY5 departure)
- [Fixed] FMS: Fixed a problem with Fix-to-DME Distance legs which messed up the distance/fuel/time calculations and ultimately caused a CTD due to buffer overflow

1.0.0.4  Rev 248
- [Fixed] PFD: VOR-Pointers showing bearing to localizers
- [Fixed] PFD: ADF-Pointers visible when ADF signal strength is zero
- [Fixed] AP: Sensitivity for autopilot disconnect feature due to aileron, elevator or rudder input decreased to avoid unwanted disconnects with unprecise control hardware
- [Fixed] ACP: Radio Idents are now being switched off on loading the aircraft. No beeping anymore!
- [Fixed] RTU: Improved initialization for more better representation of the loading status of FSX/P3D

1.0.0.5 Rev 251
- [Added] AP: switch auto-coordination on when autopilot is on
- [Fixed] FMS: Radio page now accepts COM frequencies with less than 3 decimal places (i.e. 122.8 instead of 122.800)
- [Fixed] FMS: Can not enter a direct airway after a SID ending with a (VECT) leg
- [Fixed] FMS: Auto-sequencing after SID or before STAR
- [Fixed] FMS: Long directs now following the line
- [Fixed] AP: FD commanding additional bank angle shortly before reaching selected heading in HDG HOLD when AP is off
- [Added] DAVE: New aircraft state "Turnaround" to simulate aircraft state after the first flight of the day
- [Fixed] FMS: Multiple improvements in SID and STAR tracking
- [Fixed] MFD: Radius to Fix drawing routine
- [Fixed] MFD: Course/Heading to Intercept Next Leg drawing routine
- [Fixed] General: Improved loading and saving of aircraft state with a flight
- [Fixed] Improved flaps extension/rectraction effects
- [Fixed] Improved localizer and glideslope capture
- [Fixed] FMS: Error in the calculation of the number of pages on the ARRIVAL page
- [Fixed] FMS: De-selecting a STAR now also clears the STAR to enroute transition
- [Fixed] 2D MCDUs are now resizable and should no longer have issues with mixed resolution setups (4K + 1080)
- [Fixed] FMS: STARs with multiple STAR->Approach transitions are now show the correct available runways
- [Fixed] FMS: FMS keyboard input is now stopped while modal P3D dialog windows (for example Go To Airport) are open
- [Fixed] HGS: FPV and flight director source data dampening (less jittering)
- [Fixed] FMS: A CTD when entering a runway that doesn't have an opposite end in the nav data (i.e. EDDF Rwy 18)
- [Fixed] FMS: SID waypoints are now inserted in the correct order if the STAR has been selected before the departure runway and SID
- [Fixed] FMS: Switching the runway no longer causes the STAR to be reset to start
- [Fixed] Gear: Reduced the brake cooldown times during flight (gear retracted)
- [Fixed] MFD: Removed overlapping HDG bug digital indication
- [Fixed] PFD: Glideslope not visible in right PFD
- [Fixed] PFD: Advisory VNAV path indicator no longer shows positive vertical speed
- [Fixed] EGPWS: Terrain mode lock now released after terrain alert is over
- [Fixed] Elec: ADG deploying after loading scenario in the air
- [Fixed] Elec: AC Bus Auto Xfer disabled after loading scenario in the air
- [Fixed] AP: Autopilot deactivating after loading scenario

1.0.0.5         Rev 252
- [Fixed] FMS: CTD when clicking TO WPT on the MFD ADV page without a loaded flightplan
- [Fixed] AP: Altitude selection knob acceleration

 

Please login to display this image.

 

Please login to display this image.

 

Please login to display this image.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy & Terms of Use