Mark Fox 6 Posted August 2, 2017 Share Posted August 2, 2017 I might be being dumb here (and it does happen, quite frequently - so please feel free to ) but I don't seem to be able to get the yoke to hide properly According to the manual (p20), CTRL+W should do it, but this appears to toggle the HUD instead. Attempting to apply logic I then tried the command listed for "Toggle HUD", which is SHIFT+Q, which makes the yoke vanish for a split second then return. In the FAQ topic I noted that it was important to load a default AC first (which I did, the default F22 in P3D4) - am I missing something obvious or have I hit on a bug? I'm running P3D 4.0.28.21686 Pro Plus, on Windows 8.1 64bit. (Unrelated to the issue at hand, can I also just add that this has really been worth the wait, it's performed like a dream so far! Thanks for all the hard work) Link to comment Share on other sites More sharing options...
Hans Hartmann [OLD] 1419 Posted August 2, 2017 Share Posted August 2, 2017 Ctrl+W is for the HGS. That's a bug in the manual. To hide the yoke, click the black plaque above the MFD (second display from the left). It's also explained in Frank's troubleshooting post: Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted August 2, 2017 Aerosoft Share Posted August 2, 2017 Try clicking on the little placard with the speeds on the dash. Link to comment Share on other sites More sharing options...
Mark Fox 6 Posted August 2, 2017 Author Share Posted August 2, 2017 It appears to do the same as when I press SHIFT+Q, disappears for a fraction of a second then returns - it won't seem to stay hidden Link to comment Share on other sites More sharing options...
blahhh 41 Posted August 2, 2017 Share Posted August 2, 2017 Quote disappears for a fraction of a second then returns same issue, but randomly, sometimes it work fine. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted August 2, 2017 Aerosoft Share Posted August 2, 2017 Mmmmm we'll check on this. It was reported in testing but we thought it was fully solved. Link to comment Share on other sites More sharing options...
Mark Fox 6 Posted August 2, 2017 Author Share Posted August 2, 2017 Thanks Mathijs, I've got no work at all this week so if you need me to do any testing/troubleshooting from my end then I'm happy to do whatever is needed Link to comment Share on other sites More sharing options...
Hans Hartmann [OLD] 1419 Posted August 2, 2017 Share Posted August 2, 2017 During testing we only had this happen when the aircraft was loaded directly from the free flight/scenario window. Please check topic #8 in the troubleshooting thread: Link to comment Share on other sites More sharing options...
Mark Fox 6 Posted August 2, 2017 Author Share Posted August 2, 2017 Just now, Hans Hartmann said: During testing we only had this happen when the aircraft was loaded directly from the free flight/scenario window. Please check topic #8 in the troubleshooting thread: I did mention that I loaded the aircraft by switching from a default one loaded in at my starting airport Link to comment Share on other sites More sharing options...
Hans Hartmann [OLD] 1419 Posted August 2, 2017 Share Posted August 2, 2017 Oops. I didn't see that. Sorry. Link to comment Share on other sites More sharing options...
Charly04 5 Posted August 2, 2017 Share Posted August 2, 2017 For me it will work fine by clicking the black plate. Please login to display this image. Please login to display this image. P.S. with P3D v3.4 Link to comment Share on other sites More sharing options...
Mark Fox 6 Posted August 2, 2017 Author Share Posted August 2, 2017 5 minutes ago, Hans Hartmann said: Oops. I didn't see that. Sorry. No worries, I know how much you must be having to keep on top of on launch day Link to comment Share on other sites More sharing options...
Eduard Gasull 258 Posted August 2, 2017 Share Posted August 2, 2017 Just now, Mark Fox said: I did mention that I loaded the aircraft by switching from a default one loaded in at my starting airport please reload the aircraft again. this issue happens rarely but happens, the best way to solution if you see this. Its to launch default, and the load CRJ if is not, launch CRJ again. Link to comment Share on other sites More sharing options...
Mark Fox 6 Posted August 2, 2017 Author Share Posted August 2, 2017 1 minute ago, Eduard Gasull said: please reload the aircraft again. this issue happens rarely but happens, the best way to solution if you see this. Its to launch default, and the load CRJ if is not, launch CRJ again. It's happening pretty consistently here, haven't managed to get it to hide since installing first thing this morning (across multiple launches of the whole sim) - I made sure that it wasn't just a one off before I opened the thread Link to comment Share on other sites More sharing options...
Lennart1948 79 Posted August 2, 2017 Share Posted August 2, 2017 For me hiding the yoke doesn't work too. I click on the thing over the ND a couple of times and it disappears for only 1/2 second. Link to comment Share on other sites More sharing options...
gjharrall 35 Posted August 2, 2017 Share Posted August 2, 2017 Same here. Almost seems livery dependent. It worked fine on the 700 series and then I switched to AC 900 and the yoke just flickers. Link to comment Share on other sites More sharing options...
DJJose 6 Posted August 2, 2017 Share Posted August 2, 2017 Yoke don't hide for me too. Link to comment Share on other sites More sharing options...
Lennart1948 79 Posted August 2, 2017 Share Posted August 2, 2017 For me it's on the both Lufthansa regionals, didn't try any other yet Link to comment Share on other sites More sharing options...
michaellowl 0 Posted August 3, 2017 Share Posted August 3, 2017 It hides only for seconds Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted August 3, 2017 Deputy Sheriffs Share Posted August 3, 2017 17 hours ago, gjharrall said: Same here. Almost seems livery dependent. It worked fine on the 700 series and then I switched to AC 900 and the yoke just flickers. You should never load complex aircrafts like this over each other. And I also can not replicate this issue, at least in P3Dv4 Link to comment Share on other sites More sharing options...
McChester 8 Posted August 3, 2017 Share Posted August 3, 2017 Same issue here. I took a short clip in order to demonstrate that a default aircraft was loaded first. Video was messed up, uploading another. Link to comment Share on other sites More sharing options...
gjharrall 35 Posted August 3, 2017 Share Posted August 3, 2017 6 hours ago, mopperle said: You should never load complex aircrafts like this over each other. And I also can not replicate this issue, at least in P3Dv4 It does seem to happen randomly regardless of default aircraft loaded first or not. Link to comment Share on other sites More sharing options...
McChester 8 Posted August 3, 2017 Share Posted August 3, 2017 The bug seems to be random at times. One time hiding the yokes works just perfectly, another time it wont. I have linked a video below where it worked on the first try - after closing the sim down and starting it again it did not work anymore. I would say hiding the yoke works 1 out of 3 times for me. https://youtu.be/6X9AG1xHoic Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted August 3, 2017 Aerosoft Share Posted August 3, 2017 Yes, it is an issue that is looked at. Link to comment Share on other sites More sharing options...
Er!k 572 Posted August 31, 2017 Share Posted August 31, 2017 Hello, I still have this issue with the latest update in P3D v4. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.