Raymond66 8 Posted April 22, 2017 Share Posted April 22, 2017 Hi, I installed v 1.03 on Friday 21 April, and found the following issues: see the video below. I spent some time on this, to try to help... NB: as I found the following 3 issues within minutes, I stopped investigating, so there may be other issues I didn't see. I have FSX SE only. - there is a hole/gap on the cliff/road between airport and Machico (NB: this problem does not occur in v 1.02)- weird shadows on runway 23 side (NB: this problem does not occur in v 1.02)- aircraft hits something above/around runway 23 side in different locations/altitudes, even with Crash detection set to OFF. (NB: this problem does not occur in v 1.02)Settings is 1 meter. I have the same settings as for v 1.02. Also, in v 1.03 I had to remove/disable lpma_apttfc.BGL because otherwise I only get 10 FPS. In v 1.02 I got 15 FPS with lpma_apttfc.BGL. See my PC specs at the end of this post. In v 1.03 without lpma_apttfc.BGL I get 20 FPS. In v 1.02 without lpma_apttfc.BGL I got 35 FPS. Question: in Porto Santo, where are the windmils? None of these problems were in v 1.02. See this topic, with a video made using v 1.02: (NB: I uninstalled v1.03 and reinstalled v1.02, and the issues I described above are gone) My PC specs: - Intel Core i7 5960X Haswell-E 8-Cored 3.50GHz Processor (Overclocked to 4.3 GHz) - Corsair Hydro Series H100i GTX Extreme Performance Liquid CPU Cooler - Asus Rampage V Extreme Intel X99 Motherboard - 64GB Crucial DDR4 2133MHz Memory (8 x 8GB sticks) - Asus GeForce GTX 980 TI 6GB STRIX OC Direct CU II - 512GB Samsung 850 Pro Solid State Drive: OS and programs - 2TB Samsung 850 Pro Solid State Drive: sims - 2 Western Digital BLACK SERIES 3TB 3.5" 7200RPM Internal Hard Drive in RAID 1 Configuration - Corsair AX 1200i 80 PLS Platinum Modular 1200W PSU - Creative Sound Blaster ZX Gaming Soundcard - Windows 7 Professional 64 bit Link to comment Share on other sites More sharing options...
christian1974 130 Posted April 22, 2017 Share Posted April 22, 2017 I have problems with v1.03 too Some things that already were solved in 1.02 were back. - Illhas desertas have no Mesh - The "crash" problem (effect) is there again at end of Rwy05. - Still no ATIS. - Hold short at Taxiway B is wrong. The real seems to be just next to the curve. In the AFCAD it is just next to the runway. - coastline has big holes again. Etc etc. I really hope we get a working scenery in near future as this is the 4th try to solve the problems. And please. Do only one hotfix to solve the problems. We don't want to collect the needed files from different threads. Link to comment Share on other sites More sharing options...
Raymond66 8 Posted April 22, 2017 Share Posted April 22, 2017 Christian1974, I agree, some problems that were solved in 1.02 are back. But something has changed in lpma_apttfc.BGL: it seems the road traffic around the airport is not in it now. Explanation: I had/have to remove/disable lpma_apttfc.BGL because it lowers FPS: In v 1.02, if lpma_apttfc.BGL is ON I got ~15 FPS, if lpma_apttfc.BGL is OFF I got ~35 FPS. In v 1.02, when lpma_apttfc.BGL is OFF, I have no road traffic around the airport. In v 1.03, if lpma_apttfc.BGL is ON I got ~10 FPS, if lpma_apttfc.BGL is OFF I got ~20 FPS. In v 1.03, when lpma_apttfc.BGL is OFF, I still have road traffic around the airport. So, the road traffic around the airport is in another BGL. Questions: In which BGL is the road traffic around the airport? What is in lpma_apttfc.BGL? Link to comment Share on other sites More sharing options...
christian1974 130 Posted April 22, 2017 Share Posted April 22, 2017 Don't know about the traffic files. Traffic seems to be OK in FSX. Not much but it is there.g I never had any traffic at the airport/apron. Don't know if something is included in the scenery. Nevertheless there are also good things. 3D Grass looks great and the PAPI and other lights look much better now. At the end we also got centerlights at the taxiways. Link to comment Share on other sites More sharing options...
Raymond66 8 Posted April 22, 2017 Share Posted April 22, 2017 9 minutes ago, christian1974 said: Don't know about the traffic files. Traffic seems to be OK in FSX. Not much but it is there. I never had any traffic at the airport/apron. Don't know if something is included in the scenery. I have FSX SE only. For road traffic around the airport, see my posts above. For aircraft traffic at the airport, I never had any: I think it is by design, not to cause problems with other aircraft traffic addon. Link to comment Share on other sites More sharing options...
christian1974 130 Posted April 22, 2017 Share Posted April 22, 2017 Did not talk about aircraft traffic. I have aircraft traffic as I am using MyTraffic. I talked about service vehicles or follow me cars that drive at the service roads and the apron. I don't think that these are included. Link to comment Share on other sites More sharing options...
Raymond66 8 Posted April 22, 2017 Share Posted April 22, 2017 1 minute ago, christian1974 said: Did not talk about aircraft traffic. I have aircraft traffic as I am using MyTraffic. I talked about service vehicles or follow me cars that drive at the service roads and the apron. I don't think that these are included. OK, I see. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted April 22, 2017 Deputy Sheriffs Share Posted April 22, 2017 vor 3 Stunden , christian1974 sagte: I have problems with v1.03 too Some things that already were solved in 1.02 were back. - Illhas desertas have no Mesh - The "crash" problem (effect) is there again at end of Rwy05. - Still no ATIS. - Hold short at Taxiway B is wrong. The real seems to be just next to the curve. In the AFCAD it is just next to the runway. - coastline has big holes again. Etc etc. I really hope we get a working scenery in near future as this is the 4th try to solve the problems. And please. Do only one hotfix to solve the problems. We don't want to collect the needed files from different threads. The mesh for Illhas desertas is in file "longisland_MK_terrain.bgl". The rest I will investigate this evenening. Link to comment Share on other sites More sharing options...
christian1974 130 Posted April 22, 2017 Share Posted April 22, 2017 vor 3 Stunden , masterhawk sagte: The mesh for Illhas desertas is in file "longisland_MK_terrain.bgl". Which is not part of the FSX installation Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted April 22, 2017 Deputy Sheriffs Share Posted April 22, 2017 vor 8 Minuten, christian1974 sagte: Which is not part of the FSX installation Could be an Installer error. You can get the file here: Link to comment Share on other sites More sharing options...
Bernd E. 103 Posted April 22, 2017 Share Posted April 22, 2017 Hi all, I still have a little problem with coastlines. I already checked all the bgl mentioned in the first post and tehy are correct. I am using: FTX Global FTX Vector FTX OpenLC FSGlobal Ultimate Next Gen Thanks Please login to display this image. Link to comment Share on other sites More sharing options...
christian1974 130 Posted April 22, 2017 Share Posted April 22, 2017 vor 7 Stunden , christian1974 sagte: And please. Do only one hotfix to solve the problems. We don't want to collect the needed files from different threads. Hallo Masterhawk - thank you for your effords - but as said - I don´t want to look here and there. One Hotfix and all is ok. I payed the full price at the beginning, and I´d like to have a working scenery. This is the 4th try (including the realease) to give us an errorfree scenery. Still no luck. It´s in my opinion even worse than v1.02. Dont´t know if you or MK-Studios or AS knows but you only have to give one or two tries to solve a problem in german law. After that you might return the thing you bought and get your money back, or keep it and get a reduced price. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted April 22, 2017 Deputy Sheriffs Share Posted April 22, 2017 I can only talk for P3Dv3 ( @MK-Studios can you please cross check): @Raymond66: - there is a hole/gap on the cliff/road between airport and Machico (NB: this problem does not occur in v 1.02) Confirmed, I have this also - weird shadows on runway 23 side (NB: this problem does not occur in v 1.02) I don't know what you mean, please a screenshot - aircraft hits something above/around runway 23 side in different locations/altitudes, even with Crash detection set to OFF. (NB: this problem does not occur in v 1.02)Settings is 1 meter. I have the same settings as for v 1.02. I don't have this effect in P3Dv3 @christian1974 - Illhas desertas have no Mesh I can confirm, that there is an Issue with the FSX installer. You can get the file here: longisland_MK_terrain.bgl - The "crash" problem (effect) is there again at end of Rwy05. I don't have this effect in P3Dv3 - Still no ATIS. I can confirm that, please try the added AFCAD: LPMA_ADEP3_ATIS_fix.bgl - Hold short at Taxiway B is wrong. The real seems to be just next to the curve. In the AFCAD it is just next to the runway. I can confirm that, but that is required by design. The holdshort in the AFCAD has a max allowed distance from the runway. - coastline has big holes again. I only have one, at Machico vor 43 Minuten, christian1974 sagte: Hallo Masterhawk - thank you for your effords - but as said - I don´t want to look here and there. One Hotfix and all is ok. I payed the full price at the beginning, and I´d like to have a working scenery. This is the 4th try (including the realease) to give us an errorfree scenery. Still no luck. It´s in my opinion even worse than v1.02. Dont´t know if you or MK-Studios or AS knows but you only have to give one or two tries to solve a problem in german law. After that you might return the thing you bought and get your money back, or keep it and get a reduced price. I'm sorry that you are not satisfied. Please feel free to contact aerosoft support. Link to comment Share on other sites More sharing options...
Raymond66 8 Posted April 22, 2017 Share Posted April 22, 2017 2 minutes ago, masterhawk said: - weird shadows on runway 23 side (NB: this problem does not occur in v 1.02) I don't know what you mean, please a screenshot Watch my video in the post above from 00:03 to 00:39. It seems it's only in slew mode, fortunately. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted April 22, 2017 Deputy Sheriffs Share Posted April 22, 2017 vor 46 Minuten, flyingpilot1740 sagte: Hi all, I still have a little problem with coastlines. I already checked all the bgl mentioned in the first post and tehy are correct. I am using: FTX Global FTX Vector FTX OpenLC FSGlobal Ultimate Next Gen Thanks Please login to display this image. Hi, I don't have this issues in P3D. There is still something other active on your system. Have you deinstalled 1.02 prior 1.03 installation? Have you used admin rights? Are you sure you have checked everythin from post #2? Any other AFCAD from an traffic-addon or another old madeira addon? Any other mesh addon? Any other vector data addon? Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted April 22, 2017 Deputy Sheriffs Share Posted April 22, 2017 vor 3 Minuten, Raymond66 sagte: Watch my video in the post above from 00:03 to 00:39. It seems it's only in slew mode, fortunately. I see what you mean, I can't reproduce it in P3D. Something for MK-Studios. Link to comment Share on other sites More sharing options...
christian1974 130 Posted April 22, 2017 Share Posted April 22, 2017 vor 32 Minuten, masterhawk sagte: @MK-Studios @Raymond66 @christian1974 - Illhas desertas have no Mesh I can confirm, that there is an Issue with the FSX installer. You can get the file here: longisland_MK_terrain.bgl - The "crash" problem (effect) is there again at end of Rwy05. I don't have this effect in P3Dv3 - Still no ATIS. I can confirm that, please try the added AFCAD: LPMA_ADEP3_ATIS_fix.bgl - coastline has big holes again. I only have one, at Machico Ok the islands are back ;-) The crash problem is even showed in Rymond66s video. Maybe a FSX thing as you don´t have it in P3D But is was gone in V1.02 so there should be a sollution. And yes I have the crash-detection off, but the effect appears nevertheless. ATIS Problem still there in FSX - with your and with my edited AFCAD ;-). No Frequency shown in FSX ATC-Screen and even no sound when tune in manually. What I meant with holes were mesh problems south of the airport as seen in Raymond66 video screen. Downgoing street etc. Managed to solve it with the "novector" option file. Haven´t till now seen the hole at Machiaro but I can confirm it is also there in FSX. Link to comment Share on other sites More sharing options...
Bernd E. 103 Posted April 23, 2017 Share Posted April 23, 2017 vor 6 Stunden , masterhawk sagte: Hi, I don't have this issues in P3D. There is still something other active on your system. Have you deinstalled 1.02 prior 1.03 installation? Have you used admin rights? Are you sure you have checked everythin from post #2? Any other AFCAD from an traffic-addon or another old madeira addon? Any other mesh addon? Any other vector data addon? Have you deinstalled 1.02 prior 1.03 installation? Yes Have you used admin rights? Yes Are you sure you have checked everythin from post #2? Yes Any other AFCAD from an traffic-addon or another old madeira addon? Nope Any other mesh addon? only FSGlobal Ultimate NG Any other vector data addon? only Orbx Vector I think i solved it. In the AFM Tool of FSGlobal, LPMA was "installed". I removed it and now it looks like this (I think, its ok?) Please login to display this image. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted April 23, 2017 Deputy Sheriffs Share Posted April 23, 2017 vor 6 Stunden , flyingpilot1740 sagte: Have you deinstalled 1.02 prior 1.03 installation? Yes Have you used admin rights? Yes Are you sure you have checked everythin from post #2? Yes Any other AFCAD from an traffic-addon or another old madeira addon? Nope Any other mesh addon? only FSGlobal Ultimate NG Any other vector data addon? only Orbx Vector I think i solved it. In the AFM Tool of FSGlobal, LPMA was "installed". I removed it and now it looks like this (I think, its ok?) Please login to display this image. Yes it's OK. Link to comment Share on other sites More sharing options...
Daantjegames 0 Posted April 23, 2017 Share Posted April 23, 2017 Ok Thank you Link to comment Share on other sites More sharing options...
Norcal Bear 0 Posted April 27, 2017 Share Posted April 27, 2017 I just installed 1.03, followed the directions on page 1, and while the airport looks correct, I have the weird crash issue above both ends of the runway. Just FYI...........using FSX. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted April 27, 2017 Deputy Sheriffs Share Posted April 27, 2017 vor 37 Minuten, Norcal Bear sagte: I just installed 1.03, followed the directions on page 1, and while the airport looks correct, I have the weird crash issue above both ends of the runway. Just FYI...........using FSX. There is being worked on. It will be fixed with 1.04 Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted April 27, 2017 Developer Share Posted April 27, 2017 vor 37 Minuten, Norcal Bear sagte: I just installed 1.03, followed the directions on page 1, and while the airport looks correct, I have the weird crash issue above both ends of the runway. Just FYI...........using FSX. See here: Link to comment Share on other sites More sharing options...
Norcal Bear 0 Posted April 27, 2017 Share Posted April 27, 2017 Great, I'll wait for the fix :-) Link to comment Share on other sites More sharing options...
Rolf2 1 Posted April 30, 2017 Share Posted April 30, 2017 A positive message: Today I installed version 1.03 after the deinstalling from 1.02. 1.03 correct automatically most of the bgl, in my case the APX and CVX bgl from the Main Scenery, the FS Global2010 bgl and the OrbXVector bgl except the both "default" bgl . Then I installed Sode 1.4.2. over the 1.4.1- Version. The repair-function, as described, doesn't work, 1.4.2 cannot repair 1.4.1. so the advice from the wizard.Register and activate -function with the both pictures is a little illogical to commit but al last it worked. After that Madeira and Porto Santo are functionally, so my first impression. Regards Rolf Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.