Developer OPabst 2091 Posted January 24, 2017 Developer Share Posted January 24, 2017 AES 2.45a is available now - Productpage - Installer AES 2.45a - List of supported Addon Airports with AES 2.45a (ggf. Browser refeshen) - Releasenote 2.45 - Documentation, how to use replacement textures, you find in the <FS>\Aerosoft\AES with the name "Repaint Install Info ENG.pdf" - Replacement Set of repainters can be up/downloaded in the AES Download Area of this forum. - Who wants to repaint textures, please look here: AES-Repaintkit 1.2 AES 2.45a adds the new Aerosoft Madeira X Evolution and includes privious Fixes for 2.45 It also includes some changes needed for before or in near future changed Addon Installer for - Mega Airport Frankfurt V2.1x - German Airports 3 - Bremen X V2.00 - German Airports 1 - Stuttgart X V2.00 - Aerosoft Manchester X V1.03 Please login to display this image. Please read more info's in the Releasenote! Please only post AES 2.45a related issues here in this thread, no request for future release! Fixes: 2017-03-14: Installer changed to V2.45a and it includes all Fixes now 2017-04-07: Installer replaced with a new one to Fix Followme Issue in EDDF V2.x Link to comment Share on other sites More sharing options...
graemeb 1 Posted January 25, 2017 Share Posted January 25, 2017 Thanks for this update, however, there is a problem with the AES config for Albysim HEMA for FS9 . I have the paid version of the scenery installed on my system, but AES lists the airport in red (not installed). The config file (AESA_HEMA_ALS.CFG) is looking for the files HEMA20.bgl and HEMA50.bgl, which exist in the demo version only. Albysim have different file names for the demo version and the paid version, which should be MARSA20.bgl and MARSA50.bgl. I tried changing the text in the CFG file, but AES still comes up with the airport listed as not installed. Can you please investigate? Thanks. Link to comment Share on other sites More sharing options...
John1604 6 Posted January 25, 2017 Share Posted January 25, 2017 Dear Oliver, About the scenery EGNV for FS2004, I did received this mail message from the makers that it isn't supported with version 2.45. Quote Hello, Thank you for your email. Unfortunately our EGNV scenery is not currently compatible with AES. I have contacted Aerosoft about making a compatible version but I haven't heard much back from them regarding how. So I hope to release a compatible version in the future but for now I am sorry to say Flagship Durham Tees is the best we can offer for FS2004. Regards Mark - Soarfly Concepts Scenery Unquote Link to comment Share on other sites More sharing options...
John1604 6 Posted January 26, 2017 Share Posted January 26, 2017 Dear Oliver, I found also a issue with the new upgrade voor GAP3 - Hamburg 2016 for FS2004. When I did install the upgrade from Aerosoft then it will be installed into a new folder \\Aerosoft\German Airports 3 - Hamburg with inside a LC and SC folder. After startup the AESHelp, my new scenery didn't found it. I did open de AESA_EDDH_GA7.cfg file and there is written something wrong (see the highlighted) : NAME=Aerosoft GAP-3 Hamburg Version 2016 DEFAULT=Aerosoft\German Airports 3 SEARCH9=EDDH_jetways_LIB,EDDH_TWY-Schilder SEARCHX=EDDH_jetway_LIB,EDDH_lib-obj_2016 So I did change it to this one : NAME=Aerosoft GAP-3 Hamburg Version 2016 DEFAULT=Aerosoft\German Airports 3 - Hamburg SEARCH9=EDDH_2009_jetways_LIB,EDDH_TWY-Schilder SEARCHX=EDDH_jetway_LIB,EDDH_lib-obj_2016 Maybe you can fix this config file and thanks in advange for it. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted January 26, 2017 Author Developer Share Posted January 26, 2017 vor 3 Stunden , John1604 sagte: Dear Oliver, I found also a issue with the new upgrade voor GAP3 - Hamburg 2016 for FS2004. When I did install the upgrade from Aerosoft then it will be installed into a new folder \\Aerosoft\German Airports 3 - Hamburg with inside a LC and SC folder. After startup the AESHelp, my new scenery didn't found it. I did open de AESA_EDDH_GA7.cfg file and there is written something wrong (see the highlighted) : Sorry, but I see this different: When I install the now available FS2004 Installer Version 1.05 (no the older Version 1.04), the Identification of AES will be successful for FS2004 too, as the related file (EDDH_jetways_LIB.BGL) is present, not the old version (EDDH_2009_jetways_Lib). So please don't make changes in the AES CFG File, just redownload an run the newest installer 1.05 for Hamburg. AES 2.45 is not compatible to V1.04, because the gatenumbers has changed in 1.05 Link to comment Share on other sites More sharing options...
John1604 6 Posted January 26, 2017 Share Posted January 26, 2017 8 hours ago, OPabst said: Sorry, but I see this different: When I install the now available FS2004 Installer Version 1.05 (no the older Version 1.04), the Identification of AES will be successful for FS2004 too, as the related file (EDDH_jetways_LIB.BGL) is present, not the old version (EDDH_2009_jetways_Lib). So please don't make changes in the AES CFG File, just redownload an run the newest installer 1.05 for Hamburg. AES 2.45 is not compatible to V1.04, because the gatenumbers has changed in 1.05 Dear Oliver, I not really understand you. I did download the upgrade file from Simmarket. with this file name AS_GERMAN-AIRPORTS-3-HAMBURG_FS2004_V105.exe on 19 january 2017, or is there again a new one after this date ? This version I had installed on my flight system with the file name AS_GERMAN-AIRPORTS-3-2012(FS2004)_V104.exe, also from Simmarket. What I need to do know ? The problem I have solved on my flight system and everything is working fine now, included the AES program. I did download both installers (1.04 and 1.05) again from Simmarket and did unstalling both versions from my Flightsim. I did check that all folders was deleten from the Aerosoft folder. Then I install again the both versions (1.04 and then 1.05) and yeah now all the folders / files are correct. Oliver thanks for your first step help to fix this issue. Link to comment Share on other sites More sharing options...
John1604 6 Posted January 27, 2017 Share Posted January 27, 2017 On 25-1-2017 at 1:20 AM, graemeb said: Thanks for this update, however, there is a problem with the AES config for Albysim HEMA for FS9 . I have the paid version of the scenery installed on my system, but AES lists the airport in red (not installed). The config file (AESA_HEMA_ALS.CFG) is looking for the files HEMA20.bgl and HEMA50.bgl, which exist in the demo version only. Albysim have different file names for the demo version and the paid version, which should be MARSA20.bgl and MARSA50.bgl. I tried changing the text in the CFG file, but AES still comes up with the airport listed as not installed. Can you please investigate? Thanks. Dear Graeme, I had contact with Albysim and became the follow message from Alby. Quote Hi John, thank you for your feedback. Oliver Pabst writed me yesterday an e-mail and asked me about the full version of HEMA. At this time we are not shure if the new AES work with both versions (Demo and Full). So, if it does'nt work now, don't worry ! A patch will be released soon or i'll tell you how to resolve the problem (if and when Oliver will tell me about this). In the meantime enjoy the wonderful Red Sea atmoshpere :-) Have a nice evening Alby Unquote For the moment i did fix the AESA_HEMA_ALS.CFG file to MARSA020,MARSA050 and works fine now for me. Link to comment Share on other sites More sharing options...
Airprox 10 Posted January 27, 2017 Share Posted January 27, 2017 I have the EDDH 2016 installed standalone in FSX (v2.01), and when I activate AES for the airport the ground becomes rough, the aircraft bumps and kicks up dust. Deactivating AES again returns the airport to normal. Can't see any changes to the flatten files etc, but clearly AES is causing it as you can turn it on and off and replicate it reliably. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted January 27, 2017 Author Developer Share Posted January 27, 2017 vor 24 Minuten, Airprox sagte: I have the EDDH 2016 installed standalone in FSX (v2.01), and when I activate AES for the airport the ground becomes rough, the aircraft bumps and kicks up dust. Deactivating AES again returns the airport to normal. Can't see any changes to the flatten files etc, but clearly AES is causing it as you can turn it on and off and replicate it reliably. Yes, there was a wrong exclude generating this. In the first post here, you find a fix for that. Link to comment Share on other sites More sharing options...
Airprox 10 Posted January 27, 2017 Share Posted January 27, 2017 1 minute ago, OPabst said: Yes, there was a wrong exclude generating this. In the first post here, you find a fix for that. Thanks very much for the quick fix, I'll go and update now. Link to comment Share on other sites More sharing options...
albybz 15 Posted January 27, 2017 Share Posted January 27, 2017 Dear friends, first a big big “thank you” to Oliver for including our Marsa Alam HEMA scenery in the new AES 2.45 version. We are very happy and proud about this and – as usual – we’ll do and release soon as possible our custom HEMA repaint for the “AES vehicles set” on the Aerosoft AES repaints page. Thank you and have a nice week-end Alby Albysim Scenery Design Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted January 27, 2017 Author Developer Share Posted January 27, 2017 Alby, the workaround is not needed, because there is a fix in the first post already. Link to comment Share on other sites More sharing options...
albybz 15 Posted January 27, 2017 Share Posted January 27, 2017 Thank you Oliver, sorry, you're right, i didn't see your fix for HEMA in the first post. Thanks for your help and speedy resolution of the problem (as usual). Alby Link to comment Share on other sites More sharing options...
Opsman 0 Posted February 11, 2017 Share Posted February 11, 2017 Hi there, I have noticed that with UK2000's new EGCC v2 scenery, when I activate AES at this airport, it takes away 1 of the 2 gates at gate 12 (the A380 gate). Also, right next to it, gate 10, it adds a jetway. This was actually a late fix to the scenery that Gary did, as someone pointed out gate 10 no longer has a jetway. Not sure if these issues can be addressed. I did deactivate the AES and these problems went away.. Thank you always for your great product with AES. Look forward to hearing from you soon Link to comment Share on other sites More sharing options...
mail@schraepel.com 3 Posted February 13, 2017 Share Posted February 13, 2017 Hi Oliver, Quotation Mathijs Kok vom 07.02.2017 bzgl. update Pisa X: "I really do not know. I have not seen it appear on the ready for release list." ??? Can you check it? Regards Holger! Link to comment Share on other sites More sharing options...
Eduard Gasull 258 Posted February 13, 2017 Share Posted February 13, 2017 can i request for the next update, to do AES for Asturias RFS? Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted February 13, 2017 Author Developer Share Posted February 13, 2017 vor 2 Stunden , Eduard Gasull sagte: can i request for the next update, to do AES for Asturias RFS? Yes, but not here, please see the red note in the first post: Please only post AES 2.45 related issues here in this thread, no request for future release! For Airport requests we have a special thread, but please keep the format in mind (see first post there): Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted February 13, 2017 Author Developer Share Posted February 13, 2017 vor 2 Stunden , mail@schraepel.com sagte: Hi Oliver, Quotation Mathijs Kok vom 07.02.2017 bzgl. update Pisa X: "I really do not know. I have not seen it appear on the ready for release list." ??? Can you check it? Regards Holger! As I know, there are several fixes and Updates in the queue by Aerosoft since 2 weeks, but the stuff is/was full blocked by the update of the Webshop. As the shop is up now, I hope the queue will be smaler the next days. Link to comment Share on other sites More sharing options...
masped 1 Posted February 26, 2017 Share Posted February 26, 2017 Hi Oliver, activating AES at UK2000 Manchester v2 for FS9 causes the PAPI lights beside the runways to disappear, except for runway 05R. Could you add this to your list of things to fix please? Thanks, Matthew Link to comment Share on other sites More sharing options...
pianisthuy 0 Posted March 1, 2017 Share Posted March 1, 2017 Please check for AES at Thai Creation VVTS, the parking position which AES place is wrong. Should be move forward lit a bit, please see photo Please login to display this image. Link to comment Share on other sites More sharing options...
edetroit 529 Posted March 10, 2017 Share Posted March 10, 2017 On 2/26/2017 at 1:25 PM, masped said: Hi Oliver, activating AES at UK2000 Manchester v2 for FS9 causes the PAPI lights beside the runways to disappear, except for runway 05R. Could you add this to your list of things to fix please? Thanks, Matthew Hello Oliver, could you please respond to this request please? AES causes PAPI/VASI's to disappear apart from 05R. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted March 11, 2017 Author Developer Share Posted March 11, 2017 vor 17 Stunden , edetroit sagte: Hello Oliver, could you please respond to this request please? AES causes PAPI/VASI's to disappear apart from 05R. Have add a fix for this issue in the first post: Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted March 11, 2017 Author Developer Share Posted March 11, 2017 On 1.3.2017 at 11:18, pianisthuy sagte: Please check for AES at Thai Creation VVTS, the parking position which AES place is wrong. Should be move forward lit a bit, please see photo AES is not able to handle multi stoppoints for different Aircrafttypes, so ignore the labels on ground. AES stopps the aircraft related to the doors, so that jetways and the rest can operate correctly. So no issue here. Link to comment Share on other sites More sharing options...
edetroit 529 Posted March 11, 2017 Share Posted March 11, 2017 8 hours ago, OPabst said: Have add a fix for this issue in the first post: Thank you Oliver. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted March 14, 2017 Author Developer Share Posted March 14, 2017 Installer is now changed to V2.45a, more info's in the first Post: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.