Hilmi 2 Posted January 14, 2017 Share Posted January 14, 2017 Hallo Herr Pabst ,hallo Fluisianer . ich habe mir Carenado 525A CITATION CJ2 HD SERIES FSX-P3D als Download bei Aerosoft gegönnt. Jetzt habe ich das Problem,dass Sie beim Pushback stark hüpft wie früher bei den alten Wilco Bussen. Dort lies sich es sich in Aircraft Cfg. angleichen. Bei Carenado 525A CITATION CJ2 HD SERIES FSX-P3D klappt leider micht. Daher habe ich Sie sauber deinstalliert und benutze sie jetzt erstmal ohne AES . Schöner sicherlich mit AES. Vielleicht hat jemand einen Tipp für mich ! Schicke mal die Aircraft Cfg.ohne AES. contact_points] static_pitch = -1 static_cg_height = 4 gear_system_type = 1 emergency_extension_type = 2 //0 Class (1= landing gear/2= scrape point/3= skid point /4= float/5= water rudder) //1 Longitudinal Position (feet from reference datum) //2 Lateral Position (feet from reference datum, minus=Left, plus=Right ) //3 Vertical Position (feet from reference datum) //4 Impact Damage Threshold (Feet Per Minute) //5 Brake Map (0=None, 1=Left, 2=Right) //6 Wheel Radius (feet) //7 Steer Angle (degrees) //8 Static Compression (feet) (0 if rigid) //9 Max/Static Compression Ratio (max compression/static compression) //10 Damping Ratio (0=Undamped, 1=Critically Damped) //11 Extension Time (seconds) //12 Retraction Time (seconds) //13 Sound Type (0=Center gear/1=Auxiliary gear/2=Left gear/3=Right gear/4=Fuselage scrape // 5=L wing scrape/6=R wing scrape/7=Aux. scrape 1/8=Aux. Scrape 2/9= Tail) //14 IAS limit for gear retraction (KIAS) //15 IAS that gear gets damaged at (KIAS) max_number_of_points = 10 point.0 = 1, 17.1, 0.0, -4.10, 1500, 0, 0.70, 45, 0.59, 1.45, 0.9, 2.0, 2.0, 0, 255, 255 point.1 = 1, 0.0, -8.5, -4.80, 1500, 1, 0.91, 0, 0.40, 4.00, 0.5, 3.2, 3.0, 2, 260, 260 point.2 = 1, 0.0, 8.5, -4.80, 1500, 2, 0.91, 0, 0.40, 4.00, 0.5, 3.0, 3.2, 3, 265, 265 point.3 = 2, -2, -25.5, 0.00, 1500, 0, 0, 0, 0.00, 0.0, 0.0, 0, 0, 5, 0, 0 point.4 = 2, -2, 25.5, 0.00, 1500, 0, 0, 0, 0.00, 0.0, 0.0, 0, 0, 6, 0, 0 point.5 = 2, -25, 0.0, 10.00, 1500, 0, 0, 0, 0.00, 0.0, 0.0, 0, 0, 9, 0, 0 point.6 = 2, -20, -0.5, 1.50, 1500, 0, 0, 0, 0.00, 0.0, 0.0, 0, 0, 4, 0, 0 point.7 = 2, 17, 0.0, -2.70, 1500, 0, 0, 0, 0.00, 0.0, 0.0, 0, 0, 4, 0, 0 point.8 = 2, -2, -5.0, -2.90, 1500, 0, 0, 0, 0.00, 0.0, 0.0, 0, 0, 4, 0, 0 point.9 = 2, -2, 5.0, -2.90, 1500, 0, 0, 0, 0.00, 0.0, 0.0, 0, 0, 4, 0, 0 MFG AUS EDLW Hilmar Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.