PilotGW 3 Posted December 9, 2016 Share Posted December 9, 2016 Hi! I seem to have flickering ground textures at the new Menorca in exterior view. I have tried disabling all other scenery/mesh, clearing shader cache and disabling EZDok all to no avail. I've also tried changing the 'clipmode' settings for EZDok to 'normal' in cameras.cfg, as this fixed the same problem at other airports including Malaga X and Milan X. This improves the flickering, but doesn't eliminate it unfortunately. Anything I might be missing? Menorca X Evolution V1.00 P3D V3.2 Many thanks, Greg W Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted December 10, 2016 Developer Share Posted December 10, 2016 vor 19 Minuten, PilotGW sagte: P3D V3.2 A littlebit outdated, maybe? Special the ground was part of the newer versions in of P3D. Link to comment Share on other sites More sharing options...
PilotGW 3 Posted December 10, 2016 Author Share Posted December 10, 2016 Yeah, I did entertain the idea that V3.2 could be the issue. Guess I might need to bite the bullet and update. Link to comment Share on other sites More sharing options...
mirage9 6 Posted December 10, 2016 Share Posted December 10, 2016 Prepar3d 3.4 and flickering textures are here too. SOLUTION!! Go to C:\Users\yourusernamehere\AppData\Roaming\Lockheed Martin\Prepar3D v3 open cameras.cfg and delete clipmode from EzcA VC camera.Save the file and enyoj. Link to comment Share on other sites More sharing options...
PilotGW 3 Posted December 10, 2016 Author Share Posted December 10, 2016 16 hours ago, mirage9 said: Prepar3d 3.4 and flickering textures are here too. SOLUTION!! Go to C:\Users\yourusernamehere\AppData\Roaming\Lockheed Martin\Prepar3D v3 open cameras.cfg and delete clipmode from EzcA VC camera.Save the file and enyoj. This definitely helps, but I'm still seeing some slight flicker on the apron. I've also discovered that using anything other than clipmode=minimum messes up some of my preset cameras in EZDok, particularly my wing views as the aircraft clips too far from the camera. Of course doing this this brings back the flickering. I've just checked all of my other addon scenery to see if it's something I just haven't noticed before, but it seems to affect mainly some of the Aerosoft scenery I have. Menorca Evo, Milan and Malaga have quite bad flickering. Ibiza Evo has some minor flickering whereas Mallorca Evo, Heathrow and Lisbon appear to be fine. Bit of a conundrum. Link to comment Share on other sites More sharing options...
mburkhard 21 Posted December 11, 2016 Share Posted December 11, 2016 Same here, apron textures are flashing when rotating the camera around my aircraft in spot view, and this is without EZDok. I'm using P3D v3.4 incl. the service pack. Link to comment Share on other sites More sharing options...
borug 0 Posted December 12, 2016 Share Posted December 12, 2016 Me to textures are flashing without EZDok Link to comment Share on other sites More sharing options...
collegeroad 12 Posted December 12, 2016 Share Posted December 12, 2016 Same here when in external view flickering and it's quite annoying, thought I was the only one having this. Link to comment Share on other sites More sharing options...
Developer Autopiloth 454 Posted December 15, 2016 Developer Share Posted December 15, 2016 Ground is made according to the P3D SDk with their new layering method. Could you please make sure that the old Menorca is deactivated an no afcad file other than the one we delivered is active. Since there were some problems with ground flickering in Malaga P3D I took extra care to discover any flickering and definetly on my PC it won´t flicker. As well as on all other testing PCs. But I really would like to discover the culprit. Thorsten Link to comment Share on other sites More sharing options...
sydney1962 35 Posted December 15, 2016 Share Posted December 15, 2016 have installed in P3D V3.2 and everthing is fine from every view no flickering at all. Link to comment Share on other sites More sharing options...
PilotGW 3 Posted December 15, 2016 Author Share Posted December 15, 2016 Thank you for your reply! Yep, I definitely uninstalled the old Menorca before installing this one. I've run a search of my P3D folder for conflicting files. The only other files are Navdata files and one relating to FTX Vector (which I disabled). I've tried disabling everything except the default scenery and Menorca. I've deleted all of my scenery indexes and let P3D rebuild them. I've tried disabling EZDok. Not using EZDok lessens the flickering but it's still there in default spot view. I've tried deleting my P3D.cfg. All to no avail. As I said I'm also seeing the exact same at Malaga and Milan too. None of my other scenery addons exhibit this issue, including most of the Aerosoft ones. I will be doing a clean P3D install when the next hotfix drops, so maybe that might help. LEMH Flickering Please login to display this image. LEMG Flickering Please login to display this image. LIMC Flickering Please login to display this image. Link to comment Share on other sites More sharing options...
Developer Autopiloth 454 Posted December 15, 2016 Developer Share Posted December 15, 2016 wow. THAT looks strange. I don´t know what happened but it seems to me that there is another airport/scenery below Menorca (and the others). Looking at the LEMH pic: What is this kind of grey grass below the apron? It´s 100% NOT from us. Could be a exchanged detail1.bmp from ORBX, but why is the ground shiftet and breaking through the layers and loosing all details of the aerial picture? I don´t know and I guess making a new P3D Install is a good idea :-) Thorsten Link to comment Share on other sites More sharing options...
PilotGW 3 Posted December 15, 2016 Author Share Posted December 15, 2016 Yeah it's really weird. I had indeed replaced detail1.bmp with REX4. Clutching at straws I reverted to default textures, but no difference. Think I'll wait to see what the jump to V3.4 brings. Link to comment Share on other sites More sharing options...
PilotGW 3 Posted December 21, 2016 Author Share Posted December 21, 2016 Okay, just finished updating to P3D V3.4 with the new Hotfix (clean install) and the result is the same. Flickering like crazy in external view. Link to comment Share on other sites More sharing options...
Developer Autopiloth 454 Posted December 21, 2016 Developer Share Posted December 21, 2016 Ok, clean fresh Install with full installer and the result is the same????? So I must ask some questions: - What else is installed? - Was everything really removed before the new Install? P3D add ons now install somewhere else and maybe your new install refers to older Add ons. - Graphic Card and driver? - Did you Uninstall the old P3D version before? - Sure that you did not install the FSX version for any reason in P3D (Than for sure the result would be like the one you got) Thorsten Link to comment Share on other sites More sharing options...
PilotGW 3 Posted December 21, 2016 Author Share Posted December 21, 2016 Hi Thorsten, I have a number of airport scenery addons, Orbx Base, Orbx OpenLC EU, Orbx England, Orbx Vector, FreeMeshX (I've tried disabling everything in the Scenery Library except Orbx Base which is more difficult) I also have GSX, Ultimate Traffic 2, ChasePlane, Aerosoft Airbus, PMDG 777 I uninstalled every add-on and all P3D components using uninstallers and then cleaned up everything that got left behind (including AppData Local/Roaming and ProgramData files) I'm using a GTX 980 Ti with driver 373.06 I definitely installed the P3D version Again, using a camera addon exacerbates the issue, but it's still there when using default external cameras. Here's a video showing the issue. Link to comment Share on other sites More sharing options...
Developer Autopiloth 454 Posted December 21, 2016 Developer Share Posted December 21, 2016 Ok, before changing anything at my files, because most (if not all others) have no flickering: Could you please place the default 737 somewhere at the Apron and give me the height (not in slew mode) Possibly there is a height conflict with another scenery. When you say you made a clean install: Where do all other addons come from? Did you install them all and than checked Menorca? Or are these leftovers from your old install? Could you set Menorca airport and terrain (airport allways above terrain) at the top of the scenery list and also at the lowest entry (just above the default sceneries) and check for flickering? Would it be possible to make a teamviewer session that I can check what happens in P3D at your PC (needs a fast Internet connection) (Please PM), but since holiday seasonis comming this could happen next year only. Thorsten Link to comment Share on other sites More sharing options...
PilotGW 3 Posted December 21, 2016 Author Share Posted December 21, 2016 Hi, P3D doesn't have a default 737, so I used the default F22 and the elevation is 304ft. As far as clean install goes, I uninstalled everything and then deleted any leftover files, including the main P3D folder and the folders in AppData and ProgramData. I then installed everything again using the installers for all products. Nothing was lifted from an old install. Admittedly, I didn't check Menorca as I was installing. I've moved Menorca to the top and to the bottom of the Scenery Library. No change. Link to comment Share on other sites More sharing options...
scubaboy 2 Posted December 22, 2016 Share Posted December 22, 2016 I'll bet you are using REX Worldwide HD Airports with grass textures installed. Check this thread: Link to comment Share on other sites More sharing options...
PilotGW 3 Posted December 22, 2016 Author Share Posted December 22, 2016 1 hour ago, scubaboy said: I'll bet you are using REX Worldwide HD Airports with grass textures installed. Check this thread: No, I don't have REX Worldwide HD. I've just completely uninstalled P3D again. Literally blitzed all traces of it and cleared the old registry entries. Now I've got a completely clean sim with JUST Menorca installed. Still flickering in default spot view. Also noticed it only seems to happen when moving the camera around the front of the aircraft and that bigger aircraft seem to worsen the effect. Link to comment Share on other sites More sharing options...
Pablo__sk8 29 Posted March 26, 2017 Share Posted March 26, 2017 I have the same problem, my textures are also flickering, to the pont that in LESB (San Luís) I don't even see the taxiway/apron! Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted March 27, 2017 Aerosoft Share Posted March 27, 2017 19 hours ago, Pablo__sk8 said: I have the same problem, my textures are also flickering, to the pont that in LESB (San Luís) I don't even see the taxiway/apron! Almost certainly related to a 3rd party mesh covering the same area. Link to comment Share on other sites More sharing options...
Pablo__sk8 29 Posted March 27, 2017 Share Posted March 27, 2017 3 hours ago, Mathijs Kok said: Almost certainly related to a 3rd party mesh covering the same area. I don't have any mesh addon Link to comment Share on other sites More sharing options...
Developer Autopiloth 454 Posted March 27, 2017 Developer Share Posted March 27, 2017 vor 49 Minuten, Pablo__sk8 sagte: I don't have any mesh addon Could yo give me some more infos about your Add ons (EZ camera or something?) and sim and post a screenshot of that area? Thorsten Link to comment Share on other sites More sharing options...
Pablo__sk8 29 Posted March 27, 2017 Share Posted March 27, 2017 18 minutes ago, Autopiloth said: Could yo give me some more infos about your Add ons (EZ camera or something?) and sim and post a screenshot of that area? Thorsten I just have some plane addons and some sceneries, and ASN & REX Soft Clouds but no EZCA or anything like that. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.